From: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com>
To: akpm@linux-foundation.org, linux-kernel@vger.kernel.org
Cc: ak@suse.de, gregkh@suse.de, muli@il.ibm.com,
suresh.b.siddha@intel.com, arjan@linux.intel.com,
ashok.raj@intel.com, davem@davemloft.net, clameter@sgi.com,
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Subject: [Intel IOMMU 01/10] DMAR detection and parsing logic
Date: Tue, 19 Jun 2007 14:37:02 -0700 [thread overview]
Message-ID: <20070619213808.398170000@askeshav-devel.jf.intel.com> (raw)
In-Reply-To: <20070619213701.219910000@askeshav-devel.jf.intel.com>
[-- Attachment #1: dmar_detection.patch --]
[-- Type: text/plain, Size: 15106 bytes --]
This patch adds support for early detection and parsing of DMAR's
(DMA Remapping ) reported to OS via ACPI tables.
DMA remapping(DMAR) devices support enables independent address
translations for Direct Memory Access(DMA) from Devices.
These DMA remapping devices are reported via ACPI tables
and includes pci device scope covered by these DMA
remapping device.
For detailed info on the specification of "Intel(R) Virtualization
Technology for Directed I/O Architecture" please see
http://www.intel.com/technology/virtualization/index.htm
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
---
arch/x86_64/Kconfig | 11 +
drivers/pci/Makefile | 3
drivers/pci/dmar.c | 327 ++++++++++++++++++++++++++++++++++++++++++++++++++
include/acpi/actbl1.h | 27 +++-
include/linux/dmar.h | 52 +++++++
5 files changed, 413 insertions(+), 7 deletions(-)
Index: linux-2.6.22-rc4-mm2/arch/x86_64/Kconfig
===================================================================
--- linux-2.6.22-rc4-mm2.orig/arch/x86_64/Kconfig 2007-06-18 15:45:39.000000000 -0700
+++ linux-2.6.22-rc4-mm2/arch/x86_64/Kconfig 2007-06-19 13:05:03.000000000 -0700
@@ -730,6 +730,17 @@
bool "Support mmconfig PCI config space access"
depends on PCI && ACPI
+config DMAR
+ bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
+ depends on PCI_MSI && ACPI && EXPERIMENTAL
+ default y
+ help
+ DMA remapping(DMAR) devices support enables independent address
+ translations for Direct Memory Access(DMA) from Devices.
+ These DMA remapping devices are reported via ACPI tables
+ and includes pci device scope covered by these DMA
+ remapping device.
+
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
Index: linux-2.6.22-rc4-mm2/drivers/pci/Makefile
===================================================================
--- linux-2.6.22-rc4-mm2.orig/drivers/pci/Makefile 2007-06-18 15:45:39.000000000 -0700
+++ linux-2.6.22-rc4-mm2/drivers/pci/Makefile 2007-06-19 13:43:14.000000000 -0700
@@ -20,6 +20,9 @@
# Build the Hypertransport interrupt support
obj-$(CONFIG_HT_IRQ) += htirq.o
+# Build Intel IOMMU support
+obj-$(CONFIG_DMAR) += dmar.o
+
#
# Some architectures use the generic PCI setup functions
#
Index: linux-2.6.22-rc4-mm2/drivers/pci/dmar.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22-rc4-mm2/drivers/pci/dmar.c 2007-06-18 15:45:46.000000000 -0700
@@ -0,0 +1,327 @@
+/*
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Copyright (C) Ashok Raj <ashok.raj@intel.com>
+ * Copyright (C) Shaohua Li <shaohua.li@intel.com>
+ * Copyright (C) Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+ *
+ * This file implements early detection/parsing of DMA Remapping Devices
+ * reported to OS through BIOS via DMA remapping reporting (DMAR) ACPI
+ * tables.
+ */
+
+#include <linux/pci.h>
+#include <linux/dmar.h>
+
+#undef PREFIX
+#define PREFIX "DMAR:"
+
+/* No locks are needed as DMA remapping hardware unit
+ * list is constructed at boot time and hotplug of
+ * these units are not supported by the architecture.
+ */
+LIST_HEAD(dmar_drhd_units);
+LIST_HEAD(dmar_rmrr_units);
+
+static struct acpi_table_header * __initdata dmar_tbl;
+
+static void __init dmar_register_drhd_unit(struct dmar_drhd_unit *drhd)
+{
+ /*
+ * add INCLUDE_ALL at the tail, so scan the list will find it at
+ * the very end.
+ */
+ if (drhd->include_all)
+ list_add_tail(&drhd->list, &dmar_drhd_units);
+ else
+ list_add(&drhd->list, &dmar_drhd_units);
+}
+
+static void __init dmar_register_rmrr_unit(struct dmar_rmrr_unit *rmrr)
+{
+ list_add(&rmrr->list, &dmar_rmrr_units);
+}
+
+static int __init dmar_parse_one_dev_scope(struct acpi_dmar_device_scope *scope,
+ struct pci_dev **dev, u16 segment)
+{
+ struct pci_bus *bus;
+ struct pci_dev *pdev = NULL;
+ struct acpi_dmar_pci_path *path;
+ int count;
+
+ bus = pci_find_bus(segment, scope->bus);
+ path = (struct acpi_dmar_pci_path *)(scope + 1);
+ count = (scope->length - sizeof(struct acpi_dmar_device_scope))
+ / sizeof(struct acpi_dmar_pci_path);
+
+ while (count) {
+ if (pdev)
+ pci_dev_put(pdev);
+ /*
+ * Some BIOSes list non-exist devices in DMAR table, just
+ * ignore it
+ */
+ if (!bus) {
+ printk(KERN_WARNING
+ PREFIX "Device scope bus [%d] not found\n",
+ scope->bus);
+ break;
+ }
+ pdev = pci_get_slot(bus, PCI_DEVFN(path->dev, path->fn));
+ if (!pdev) {
+ printk(KERN_WARNING PREFIX
+ "Device scope device [%04x:%02x:%02x.%02x] not found\n",
+ segment, bus->number, path->dev, path->fn);
+ break;
+ }
+ path ++;
+ count --;
+ bus = pdev->subordinate;
+ }
+ if (!pdev) {
+ printk(KERN_WARNING PREFIX
+ "Device scope device [%04x:%02x:%02x.%02x] not found\n",
+ segment, scope->bus, path->dev, path->fn);
+ *dev = NULL;
+ return 0;
+ }
+ if ((scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT && \
+ pdev->subordinate) || (scope->entry_type == \
+ ACPI_DMAR_SCOPE_TYPE_BRIDGE && !pdev->subordinate)) {
+ pci_dev_put(pdev);
+ printk(KERN_WARNING PREFIX
+ "Device scope type does not match for %s\n",
+ pci_name(pdev));
+ return -EINVAL;
+ }
+ *dev = pdev;
+ return 0;
+}
+
+static int __init dmar_parse_dev_scope(void *start, void *end, int *cnt,
+ struct pci_dev ***devices, u16 segment)
+{
+ struct acpi_dmar_device_scope *scope;
+ void * tmp = start;
+ int index;
+ int ret;
+
+ *cnt = 0;
+ while (start < end) {
+ scope = start;
+ if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT ||
+ scope->entry_type == ACPI_DMAR_SCOPE_TYPE_BRIDGE)
+ (*cnt)++;
+ else
+ printk(KERN_WARNING PREFIX
+ "Unsupported device scope\n");
+ start += scope->length;
+ }
+ if (*cnt == 0)
+ return 0;
+
+ *devices = kcalloc(*cnt, sizeof(struct pci_dev *), GFP_KERNEL);
+ if (!*devices)
+ return -ENOMEM;
+
+ start = tmp;
+ index = 0;
+ while (start < end) {
+ scope = start;
+ if (scope->entry_type == ACPI_DMAR_SCOPE_TYPE_ENDPOINT ||
+ scope->entry_type == ACPI_DMAR_SCOPE_TYPE_BRIDGE) {
+ ret = dmar_parse_one_dev_scope(scope,
+ &(*devices)[index], segment);
+ if (ret) {
+ kfree(*devices);
+ return ret;
+ }
+ index ++;
+ }
+ start += scope->length;
+ }
+
+ return 0;
+}
+
+/**
+ * dmar_parse_one_drhd - parses exactly one DMA remapping hardware definition
+ * structure which uniquely represent one DMA remapping hardware unit
+ * present in the platform
+ */
+static int __init
+dmar_parse_one_drhd(struct acpi_dmar_header *header)
+{
+ struct acpi_dmar_hardware_unit *drhd;
+ struct dmar_drhd_unit *dmaru;
+ int ret = 0;
+ static int include_all;
+
+ dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
+ if (!dmaru)
+ return -ENOMEM;
+
+ drhd = (struct acpi_dmar_hardware_unit *)header;
+ dmaru->reg_base_addr = drhd->address;
+ dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */
+
+ if (!dmaru->include_all)
+ ret = dmar_parse_dev_scope((void *)(drhd + 1),
+ ((void *)drhd) + header->length,
+ &dmaru->devices_cnt, &dmaru->devices,
+ drhd->segment);
+ else {
+ /* Only allow one INCLUDE_ALL */
+ if (include_all) {
+ printk(KERN_WARNING PREFIX "Only one INCLUDE_ALL "
+ "device scope is allowed\n");
+ ret = -EINVAL;
+ }
+ include_all = 1;
+ }
+
+ if (ret || (dmaru->devices_cnt == 0 && !dmaru->include_all))
+ kfree(dmaru);
+ else
+ dmar_register_drhd_unit(dmaru);
+ return ret;
+}
+
+static int __init
+dmar_parse_one_rmrr(struct acpi_dmar_header *header)
+{
+ struct acpi_dmar_reserved_memory *rmrr;
+ struct dmar_rmrr_unit *rmrru;
+ int ret = 0;
+
+ rmrru = kzalloc(sizeof(*rmrru), GFP_KERNEL);
+ if (!rmrru)
+ return -ENOMEM;
+
+ rmrr = (struct acpi_dmar_reserved_memory *)header;
+ rmrru->base_address = rmrr->base_address;
+ rmrru->end_address = rmrr->end_address;
+ ret = dmar_parse_dev_scope((void *)(rmrr + 1),
+ ((void *)rmrr) + header->length,
+ &rmrru->devices_cnt, &rmrru->devices, rmrr->segment);
+
+ if (ret || (rmrru->devices_cnt == 0))
+ kfree(rmrru);
+ else
+ dmar_register_rmrr_unit(rmrru);
+ return ret;
+}
+
+static void __init
+dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
+{
+ struct acpi_dmar_hardware_unit *drhd;
+ struct acpi_dmar_reserved_memory *rmrr;
+
+ switch (header->type) {
+ case ACPI_DMAR_TYPE_HARDWARE_UNIT:
+ drhd = (struct acpi_dmar_hardware_unit *)header;
+ printk (KERN_INFO PREFIX
+ "DRHD (flags: 0x%08x)base: 0x%016Lx\n",
+ drhd->flags, drhd->address);
+ break;
+ case ACPI_DMAR_TYPE_RESERVED_MEMORY:
+ rmrr = (struct acpi_dmar_reserved_memory *)header;
+
+ printk (KERN_INFO PREFIX
+ "RMRR base: 0x%016Lx end: 0x%016Lx\n",
+ rmrr->base_address, rmrr->end_address);
+ break;
+ }
+}
+
+/**
+ * parse_dmar_table - parses the DMA reporting table
+ */
+static int __init
+parse_dmar_table(void)
+{
+ struct acpi_table_dmar *dmar;
+ struct acpi_dmar_header *entry_header;
+ int ret = 0;
+
+ dmar = (struct acpi_table_dmar *)dmar_tbl;
+
+ if (!dmar->width) {
+ printk (KERN_WARNING PREFIX "Zero: Invalid DMAR haw\n");
+ return -EINVAL;
+ }
+
+ printk (KERN_INFO PREFIX "Host address width %d\n",
+ dmar->width + 1);
+
+ entry_header = (struct acpi_dmar_header *)(dmar + 1);
+ while (((unsigned long)entry_header) <
+ (((unsigned long)dmar) + dmar_tbl->length)) {
+ dmar_table_print_dmar_entry(entry_header);
+
+ switch (entry_header->type) {
+ case ACPI_DMAR_TYPE_HARDWARE_UNIT:
+ ret = dmar_parse_one_drhd(entry_header);
+ break;
+ case ACPI_DMAR_TYPE_RESERVED_MEMORY:
+ ret = dmar_parse_one_rmrr(entry_header);
+ break;
+ default:
+ printk(KERN_WARNING PREFIX
+ "Unknown DMAR structure type\n");
+ ret = 0; /* for forward compatibility */
+ break;
+ }
+ if (ret)
+ break;
+
+ entry_header = ((void *)entry_header + entry_header->length);
+ }
+ return ret;
+}
+
+
+int __init dmar_table_init(void)
+{
+
+ parse_dmar_table();
+ if (list_empty(&dmar_drhd_units)) {
+ printk(KERN_ERR PREFIX "No DMAR devices found\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/**
+ * early_dmar_detect - checks to see if the platform supports DMAR devices
+ */
+int __init early_dmar_detect(void)
+{
+ acpi_status status = AE_OK;
+
+ /* if we could find DMAR table, then there are DMAR devices */
+ status = acpi_get_table(ACPI_SIG_DMAR, 0,
+ (struct acpi_table_header **)&dmar_tbl);
+
+ if (ACPI_SUCCESS(status) && !dmar_tbl) {
+ printk (KERN_WARNING PREFIX "Unable to map DMAR\n");
+ status = AE_NOT_FOUND;
+ }
+
+ return (ACPI_SUCCESS(status) ? 1 : 0);
+}
Index: linux-2.6.22-rc4-mm2/include/acpi/actbl1.h
===================================================================
--- linux-2.6.22-rc4-mm2.orig/include/acpi/actbl1.h 2007-06-18 15:45:39.000000000 -0700
+++ linux-2.6.22-rc4-mm2/include/acpi/actbl1.h 2007-06-18 15:45:46.000000000 -0700
@@ -257,7 +257,8 @@
struct acpi_table_dmar {
struct acpi_table_header header; /* Common ACPI table header */
u8 width; /* Host Address Width */
- u8 reserved[11];
+ u8 flags;
+ u8 reserved[10];
};
/* DMAR subtable header */
@@ -265,8 +266,6 @@
struct acpi_dmar_header {
u16 type;
u16 length;
- u8 flags;
- u8 reserved[3];
};
/* Values for subtable type in struct acpi_dmar_header */
@@ -274,13 +273,15 @@
enum acpi_dmar_type {
ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,
ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,
- ACPI_DMAR_TYPE_RESERVED = 2 /* 2 and greater are reserved */
+ ACPI_DMAR_TYPE_ATSR = 2,
+ ACPI_DMAR_TYPE_RESERVED = 3 /* 3 and greater are reserved */
};
struct acpi_dmar_device_scope {
u8 entry_type;
u8 length;
- u8 segment;
+ u16 reserved;
+ u8 enumeration_id;
u8 bus;
};
@@ -290,7 +291,14 @@
ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0,
ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1,
ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2,
- ACPI_DMAR_SCOPE_TYPE_RESERVED = 3 /* 3 and greater are reserved */
+ ACPI_DMAR_SCOPE_TYPE_IOAPIC = 3,
+ ACPI_DMAR_SCOPE_TYPE_HPET = 4,
+ ACPI_DMAR_SCOPE_TYPE_RESERVED = 5 /* 5 and greater are reserved */
+};
+
+struct acpi_dmar_pci_path {
+ u8 dev;
+ u8 fn;
};
/*
@@ -301,6 +309,9 @@
struct acpi_dmar_hardware_unit {
struct acpi_dmar_header header;
+ u8 flags;
+ u8 reserved;
+ u16 segment;
u64 address; /* Register Base Address */
};
@@ -312,7 +323,9 @@
struct acpi_dmar_reserved_memory {
struct acpi_dmar_header header;
- u64 address; /* 4_k aligned base address */
+ u16 reserved;
+ u16 segment;
+ u64 base_address; /* 4_k aligned base address */
u64 end_address; /* 4_k aligned limit address */
};
Index: linux-2.6.22-rc4-mm2/include/linux/dmar.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22-rc4-mm2/include/linux/dmar.h 2007-06-19 13:43:14.000000000 -0700
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Copyright (C) Ashok Raj <ashok.raj@intel.com>
+ * Copyright (C) Shaohua Li <shaohua.li@intel.com>
+ */
+
+#ifndef __DMAR_H__
+#define __DMAR_H__
+
+#include <linux/acpi.h>
+#include <linux/types.h>
+
+
+extern int dmar_table_init(void);
+extern int early_dmar_detect(void);
+
+extern struct list_head dmar_drhd_units;
+extern struct list_head dmar_rmrr_units;
+
+struct dmar_drhd_unit {
+ struct list_head list; /* list of drhd units */
+ u64 reg_base_addr; /* register base address*/
+ struct pci_dev **devices; /* target device array */
+ int devices_cnt; /* target device count */
+ u8 ignored:1; /* ignore drhd */
+ u8 include_all:1;
+ struct intel_iommu *iommu;
+};
+
+struct dmar_rmrr_unit {
+ struct list_head list; /* list of rmrr units */
+ u64 base_address; /* reserved base address*/
+ u64 end_address; /* reserved end address */
+ struct pci_dev **devices; /* target devices */
+ int devices_cnt; /* target device count */
+};
+
+#endif /* __DMAR_H__ */
--
next prev parent reply other threads:[~2007-06-19 22:18 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-19 21:37 [Intel IOMMU 00/10] Intel IOMMU support, take #2 Keshavamurthy, Anil S
2007-06-19 21:37 ` Keshavamurthy, Anil S [this message]
2007-07-04 9:18 ` [Intel IOMMU 01/10] DMAR detection and parsing logic Peter Zijlstra
2007-07-04 10:04 ` Andrew Morton
2007-07-04 10:14 ` Peter Zijlstra
2007-06-19 21:37 ` [Intel IOMMU 02/10] PCI generic helper function Keshavamurthy, Anil S
2007-06-26 5:49 ` Andrew Morton
2007-06-26 14:44 ` Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 03/10] clflush_cache_range now takes size param Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 04/10] IOVA allocation and management routines Keshavamurthy, Anil S
2007-06-26 6:07 ` Andrew Morton
2007-06-26 16:16 ` Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 05/10] Intel IOMMU driver Keshavamurthy, Anil S
2007-06-19 23:32 ` Christoph Lameter
2007-06-19 23:50 ` Keshavamurthy, Anil S
2007-06-19 23:56 ` Christoph Lameter
2007-06-26 6:32 ` Andrew Morton
2007-06-26 16:29 ` Keshavamurthy, Anil S
2007-06-26 6:25 ` Andrew Morton
2007-06-26 16:33 ` Keshavamurthy, Anil S
2007-06-26 6:30 ` Andrew Morton
2007-06-19 21:37 ` [Intel IOMMU 06/10] Avoid memory allocation failures in dma map api calls Keshavamurthy, Anil S
2007-06-19 23:25 ` Christoph Lameter
2007-06-19 23:27 ` Arjan van de Ven
2007-06-19 23:34 ` Christoph Lameter
2007-06-20 0:02 ` Arjan van de Ven
2007-06-20 8:06 ` Peter Zijlstra
2007-06-20 13:03 ` Arjan van de Ven
2007-06-20 17:30 ` Siddha, Suresh B
2007-06-20 18:05 ` Peter Zijlstra
2007-06-20 19:14 ` Arjan van de Ven
2007-06-20 20:08 ` Peter Zijlstra
2007-06-20 23:03 ` Keshavamurthy, Anil S
2007-06-21 6:10 ` Peter Zijlstra
2007-06-21 6:11 ` Arjan van de Ven
2007-06-21 6:29 ` Peter Zijlstra
2007-06-21 6:37 ` Keshavamurthy, Anil S
2007-06-21 7:13 ` Peter Zijlstra
2007-06-21 19:51 ` Keshavamurthy, Anil S
2007-06-21 6:30 ` Keshavamurthy, Anil S
2007-06-26 5:34 ` Andrew Morton
2007-06-19 21:37 ` [Intel IOMMU 07/10] Intel iommu cmdline option - forcedac Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 08/10] DMAR fault handling support Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 09/10] Iommu Gfx workaround Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 10/10] Iommu floppy workaround Keshavamurthy, Anil S
2007-06-26 6:42 ` Andrew Morton
2007-06-26 10:37 ` Andi Kleen
2007-06-26 19:25 ` Keshavamurthy, Anil S
2007-06-26 16:26 ` Keshavamurthy, Anil S
2007-06-26 6:45 ` [Intel IOMMU 00/10] Intel IOMMU support, take #2 Andrew Morton
2007-06-26 7:12 ` Andi Kleen
2007-06-26 11:13 ` Muli Ben-Yehuda
2007-06-26 15:03 ` Arjan van de Ven
2007-06-26 15:11 ` Muli Ben-Yehuda
2007-06-26 15:48 ` Keshavamurthy, Anil S
2007-06-26 16:00 ` Muli Ben-Yehuda
2007-06-26 15:56 ` Andi Kleen
2007-06-26 15:09 ` Muli Ben-Yehuda
2007-06-26 15:36 ` Andi Kleen
2007-06-26 15:15 ` Arjan van de Ven
2007-06-26 15:33 ` Andi Kleen
2007-06-26 16:25 ` Arjan van de Ven
2007-06-26 17:31 ` Andi Kleen
2007-06-26 20:10 ` Jesse Barnes
2007-06-26 22:35 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070619213808.398170000@askeshav-devel.jf.intel.com \
--to=anil.s.keshavamurthy@intel.com \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=arjan@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=clameter@sgi.com \
--cc=davem@davemloft.net \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=muli@il.ibm.com \
--cc=suresh.b.siddha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®