From: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com>
To: Christoph Lameter <clameter@sgi.com>
Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com>,
akpm@linux-foundation.org, linux-kernel@vger.kernel.org,
ak@suse.de, gregkh@suse.de, muli@il.ibm.com,
suresh.b.siddha@intel.com, arjan@linux.intel.com,
ashok.raj@intel.com, davem@davemloft.net
Subject: Re: [Intel IOMMU 05/10] Intel IOMMU driver
Date: Tue, 19 Jun 2007 16:50:46 -0700 [thread overview]
Message-ID: <20070619235046.GA2228@linux-os.sc.intel.com> (raw)
In-Reply-To: <Pine.LNX.4.64.0706191627060.15951@schroedinger.engr.sgi.com>
On Tue, Jun 19, 2007 at 04:32:23PM -0700, Christoph Lameter wrote:
> On Tue, 19 Jun 2007, Keshavamurthy, Anil S wrote:
>
> > +static inline void *alloc_pgtable_page(void)
> > +{
> > + return (void *)get_zeroed_page(GFP_ATOMIC);
> > +}
>
> Need to pass gfp_t parameter. Repeates a couple of times.
>
> > + addr &= (((u64)1) << addr_width) - 1;
> > + parent = domain->pgd;
> > +
> > + spin_lock_irqsave(&domain->mapping_lock, flags);
> > + while (level > 0) {
> > + void *tmp_page;
> > +
> > + offset = address_level_offset(addr, level);
> > + pte = &parent[offset];
> > + if (level == 1)
> > + break;
> > +
> > + if (!dma_pte_present(*pte)) {
> > + tmp_page = alloc_pgtable_page();
>
> Is it not possible here to drop the lock and do the alloc with GFP_KERNEL
> and deal with the resulting race? That is done in other parts of the
> kernel.
>
> > +/* iommu handling */
> > +static int iommu_alloc_root_entry(struct intel_iommu *iommu)
> > +{
> > + struct root_entry *root;
> > + unsigned long flags;
> > +
> > + root = (struct root_entry *)alloc_pgtable_page();
>
> This may be able to become a GFP_KERNEL alloc since interrupts are enabled
> at this point?
Memory allocated during driver init is very less and not much benefit
with the suggested changes I think. Please correct me If I am wrong.
The biggest benifit will be when we can figure out GPF_XXXX flags
during runtime when DMA map api's are called.
next prev parent reply other threads:[~2007-06-19 23:55 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-19 21:37 [Intel IOMMU 00/10] Intel IOMMU support, take #2 Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 01/10] DMAR detection and parsing logic Keshavamurthy, Anil S
2007-07-04 9:18 ` Peter Zijlstra
2007-07-04 10:04 ` Andrew Morton
2007-07-04 10:14 ` Peter Zijlstra
2007-06-19 21:37 ` [Intel IOMMU 02/10] PCI generic helper function Keshavamurthy, Anil S
2007-06-26 5:49 ` Andrew Morton
2007-06-26 14:44 ` Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 03/10] clflush_cache_range now takes size param Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 04/10] IOVA allocation and management routines Keshavamurthy, Anil S
2007-06-26 6:07 ` Andrew Morton
2007-06-26 16:16 ` Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 05/10] Intel IOMMU driver Keshavamurthy, Anil S
2007-06-19 23:32 ` Christoph Lameter
2007-06-19 23:50 ` Keshavamurthy, Anil S [this message]
2007-06-19 23:56 ` Christoph Lameter
2007-06-26 6:32 ` Andrew Morton
2007-06-26 16:29 ` Keshavamurthy, Anil S
2007-06-26 6:25 ` Andrew Morton
2007-06-26 16:33 ` Keshavamurthy, Anil S
2007-06-26 6:30 ` Andrew Morton
2007-06-19 21:37 ` [Intel IOMMU 06/10] Avoid memory allocation failures in dma map api calls Keshavamurthy, Anil S
2007-06-19 23:25 ` Christoph Lameter
2007-06-19 23:27 ` Arjan van de Ven
2007-06-19 23:34 ` Christoph Lameter
2007-06-20 0:02 ` Arjan van de Ven
2007-06-20 8:06 ` Peter Zijlstra
2007-06-20 13:03 ` Arjan van de Ven
2007-06-20 17:30 ` Siddha, Suresh B
2007-06-20 18:05 ` Peter Zijlstra
2007-06-20 19:14 ` Arjan van de Ven
2007-06-20 20:08 ` Peter Zijlstra
2007-06-20 23:03 ` Keshavamurthy, Anil S
2007-06-21 6:10 ` Peter Zijlstra
2007-06-21 6:11 ` Arjan van de Ven
2007-06-21 6:29 ` Peter Zijlstra
2007-06-21 6:37 ` Keshavamurthy, Anil S
2007-06-21 7:13 ` Peter Zijlstra
2007-06-21 19:51 ` Keshavamurthy, Anil S
2007-06-21 6:30 ` Keshavamurthy, Anil S
2007-06-26 5:34 ` Andrew Morton
2007-06-19 21:37 ` [Intel IOMMU 07/10] Intel iommu cmdline option - forcedac Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 08/10] DMAR fault handling support Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 09/10] Iommu Gfx workaround Keshavamurthy, Anil S
2007-06-19 21:37 ` [Intel IOMMU 10/10] Iommu floppy workaround Keshavamurthy, Anil S
2007-06-26 6:42 ` Andrew Morton
2007-06-26 10:37 ` Andi Kleen
2007-06-26 19:25 ` Keshavamurthy, Anil S
2007-06-26 16:26 ` Keshavamurthy, Anil S
2007-06-26 6:45 ` [Intel IOMMU 00/10] Intel IOMMU support, take #2 Andrew Morton
2007-06-26 7:12 ` Andi Kleen
2007-06-26 11:13 ` Muli Ben-Yehuda
2007-06-26 15:03 ` Arjan van de Ven
2007-06-26 15:11 ` Muli Ben-Yehuda
2007-06-26 15:48 ` Keshavamurthy, Anil S
2007-06-26 16:00 ` Muli Ben-Yehuda
2007-06-26 15:56 ` Andi Kleen
2007-06-26 15:09 ` Muli Ben-Yehuda
2007-06-26 15:36 ` Andi Kleen
2007-06-26 15:15 ` Arjan van de Ven
2007-06-26 15:33 ` Andi Kleen
2007-06-26 16:25 ` Arjan van de Ven
2007-06-26 17:31 ` Andi Kleen
2007-06-26 20:10 ` Jesse Barnes
2007-06-26 22:35 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070619235046.GA2228@linux-os.sc.intel.com \
--to=anil.s.keshavamurthy@intel.com \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=arjan@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=clameter@sgi.com \
--cc=davem@davemloft.net \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=muli@il.ibm.com \
--cc=suresh.b.siddha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome