* [M68KNOMMU]: make BOOTPARAM setup common
@ 2007-07-25 12:07 Greg Ungerer
0 siblings, 0 replies; only message in thread
From: Greg Ungerer @ 2007-07-25 12:07 UTC (permalink / raw)
To: torvalds; +Cc: gerg, linux-kernel
Currently most of the m68knommu cpu/board setup files are handling
the setup of fixed boot parameters (via CONFIG_BOOTPARAM) themselves.
Move all this into the common setup code.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
kernel/setup.c | 5 +++++
platform/5206/config.c | 8 --------
platform/5206e/config.c | 7 +------
platform/520x/config.c | 7 -------
platform/523x/config.c | 8 --------
platform/5249/config.c | 8 --------
platform/5272/config.c | 7 +------
platform/527x/config.c | 8 --------
platform/528x/config.c | 8 --------
platform/5307/config.c | 7 +------
platform/532x/config.c | 5 +----
platform/5407/config.c | 7 -------
platform/68VZ328/config.c | 7 -------
13 files changed, 9 insertions(+), 83 deletions(-)
diff -Naur linux-2.6.23-rc1/arch/m68knommu/kernel/setup.c linux/arch/m68knommu/kernel/setup.c
--- linux-2.6.23-rc1/arch/m68knommu/kernel/setup.c 2007-07-25 16:39:20.000000000 +1000
+++ linux/arch/m68knommu/kernel/setup.c 2007-07-25 16:55:11.000000000 +1000
@@ -132,6 +132,11 @@
config_BSP(&command_line[0], sizeof(command_line));
+#if defined(CONFIG_BOOTPARAM)
+ strncpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line));
+ command_line[sizeof(command_line) - 1] = 0;
+#endif
+
printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n");
#ifdef CONFIG_UCDIMM
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/5206/config.c linux/arch/m68knommu/platform/5206/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/5206/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/5206/config.c 2007-07-25 16:49:48.000000000 +1000
@@ -98,14 +98,6 @@
void config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-
-#if defined(CONFIG_BOOTPARAM)
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
-#endif
-
mach_sched_init = coldfire_timer_init;
mach_tick = coldfire_tick;
mach_gettimeoffset = coldfire_timer_offset;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/5206e/config.c linux/arch/m68knommu/platform/5206e/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/5206e/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/5206e/config.c 2007-07-25 16:50:16.000000000 +1000
@@ -98,15 +98,10 @@
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-#if defined(CONFIG_BOOTPARAM)
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#elif defined(CONFIG_NETtel)
+#if defined(CONFIG_NETtel)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size);
commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
#endif /* CONFIG_NETtel */
mach_sched_init = coldfire_timer_init;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/520x/config.c linux/arch/m68knommu/platform/520x/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/520x/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/520x/config.c 2007-07-25 16:51:13.000000000 +1000
@@ -48,13 +48,6 @@
void config_BSP(char *commandp, int size)
{
-#ifdef CONFIG_BOOTPARAM
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
-#endif
-
mach_sched_init = coldfire_pit_init;
mach_tick = coldfire_pit_tick;
mach_gettimeoffset = coldfire_pit_offset;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/523x/config.c linux/arch/m68knommu/platform/523x/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/523x/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/523x/config.c 2007-07-25 16:51:20.000000000 +1000
@@ -63,14 +63,6 @@
void config_BSP(char *commandp, int size)
{
mcf_disableall();
-
-#ifdef CONFIG_BOOTPARAM
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
-#endif
-
mach_sched_init = coldfire_pit_init;
mach_tick = coldfire_pit_tick;
mach_gettimeoffset = coldfire_pit_offset;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/5249/config.c linux/arch/m68knommu/platform/5249/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/5249/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/5249/config.c 2007-07-25 16:53:31.000000000 +1000
@@ -96,14 +96,6 @@
void config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-
-#if defined(CONFIG_BOOTPARAM)
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
-#endif
-
mach_sched_init = coldfire_timer_init;
mach_tick = coldfire_tick;
mach_gettimeoffset = coldfire_timer_offset;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/5272/config.c linux/arch/m68knommu/platform/5272/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/5272/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/5272/config.c 2007-07-25 16:50:28.000000000 +1000
@@ -113,10 +113,7 @@
mcf_disableall();
-#if defined(CONFIG_BOOTPARAM)
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#elif defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size);
commandp[size-1] = 0;
@@ -128,8 +125,6 @@
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0010000, size);
commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
#endif
mcf_timervector = 69;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/527x/config.c linux/arch/m68knommu/platform/527x/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/527x/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/527x/config.c 2007-07-25 16:53:38.000000000 +1000
@@ -63,14 +63,6 @@
void config_BSP(char *commandp, int size)
{
mcf_disableall();
-
-#ifdef CONFIG_BOOTPARAM
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
-#endif
-
mach_sched_init = coldfire_pit_init;
mach_tick = coldfire_pit_tick;
mach_gettimeoffset = coldfire_pit_offset;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/528x/config.c linux/arch/m68knommu/platform/528x/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/528x/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/528x/config.c 2007-07-25 16:50:41.000000000 +1000
@@ -63,14 +63,6 @@
void config_BSP(char *commandp, int size)
{
mcf_disableall();
-
-#ifdef CONFIG_BOOTPARAM
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
-#endif
-
mach_sched_init = coldfire_pit_init;
mach_tick = coldfire_pit_tick;
mach_gettimeoffset = coldfire_pit_offset;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/5307/config.c linux/arch/m68knommu/platform/5307/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/5307/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/5307/config.c 2007-07-25 16:51:04.000000000 +1000
@@ -111,10 +111,7 @@
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-#if defined(CONFIG_BOOTPARAM)
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \
defined(CONFIG_CLEOPATRA)
/* Copy command line from FLASH to local buffer... */
@@ -124,8 +121,6 @@
mcf_timervector = 30;
mcf_profilevector = 31;
mcf_timerlevel = 6;
-#else
- memset(commandp, 0, size);
#endif
mach_sched_init = coldfire_timer_init;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/532x/config.c linux/arch/m68knommu/platform/532x/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/532x/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/532x/config.c 2007-07-25 16:52:13.000000000 +1000
@@ -92,10 +92,7 @@
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-#if defined(CONFIG_BOOTPARAM)
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#else
+#if !defined(CONFIG_BOOTPARAM)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0x4000, 4);
if(strncmp(commandp, "kcl ", 4) == 0){
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/5407/config.c linux/arch/m68knommu/platform/5407/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/5407/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/5407/config.c 2007-07-25 16:51:31.000000000 +1000
@@ -102,13 +102,6 @@
{
mcf_setimr(MCFSIM_IMR_MASKALL);
-#if defined(CONFIG_BOOTPARAM)
- strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
- commandp[size-1] = 0;
-#else
- memset(commandp, 0, size);
-#endif
-
#if defined(CONFIG_CLEOPATRA)
/* Different timer setup - to prevent device clash */
mcf_timervector = 30;
diff -Naur linux-2.6.23-rc1/arch/m68knommu/platform/68VZ328/config.c linux/arch/m68knommu/platform/68VZ328/config.c
--- linux-2.6.23-rc1/arch/m68knommu/platform/68VZ328/config.c 2007-07-09 09:32:17.000000000 +1000
+++ linux/arch/m68knommu/platform/68VZ328/config.c 2007-07-25 16:53:49.000000000 +1000
@@ -191,13 +191,6 @@
{
printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
-#if defined(CONFIG_BOOTPARAM)
- strncpy(command, CONFIG_BOOTPARAM_STRING, size);
- command[size-1] = 0;
-#else
- memset(command, 0, size);
-#endif
-
init_hardware(command, size);
mach_sched_init = (void *) m68328_timer_init;
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-07-25 12:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-07-25 12:07 [M68KNOMMU]: make BOOTPARAM setup common Greg Ungerer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®