* USB-related instability on 2.6.23-rc1
@ 2007-07-31 21:06 Grant Likely
2007-07-31 21:24 ` Greg KH
0 siblings, 1 reply; 6+ messages in thread
From: Grant Likely @ 2007-07-31 21:06 UTC (permalink / raw)
To: Linux Kernel Mailing List, Stuart Hayes, Greg KH, David Brownell
[-- Attachment #1: Type: text/plain, Size: 1322 bytes --]
I've observed instability on my Macbook c2d with the Linus' latest
tree. Symptom is that USB devices start behaving badly and the kernel
seems to be registering incorrect HID events; (ie. moving the mouse
causes odd keyboard events). If I continue to attempt to use the
mouse, it results in a system freeze (and I don't see any kind of
backtrace in /var/log/kern.log). To reproduce the problem, I just
need to be using the keyboard/mouse. If I leave the system idle, the
problem does not seem to occur. If I actively use the keyboard/mouse,
the problem can occur at any time; usually within 5-10 minutes.
In my particular case, I've got both a USB key/mouse pair on the
laptop and an external key/mouse pair plugged in via a hub.
Typically, it's the external mouse that exhibits badness first.
USB HID devices are definitely affected. I have not tested USB block
devices. Isochronous transfers to a USB headset appear to be
unaffected, but that's under minimal testing.
I've bisected down to commit 196705c9bbc03540429b0f7cf9ee35c2f928a534,
"USB: EHCI cpufreq fix"
Reverting the patch at the head of the tree makes the kernel stable again.
I've attached my kernel config file and a dmesg output
Cheers,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
[-- Attachment #2: kern.log --]
[-- Type: text/x-log, Size: 34908 bytes --]
Inspecting /boot/System.map-2.6.23-rc1mb1-g1e4dcd22
Loaded 29120 symbols from /boot/System.map-2.6.23-rc1mb1-g1e4dcd22.
Symbols match kernel version 2.6.23.
No module symbols loaded - kernel modules not enabled.
[ 0.000000] Linux version 2.6.23-rc1mb1-g1e4dcd22 (grant@trillian) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #9 SMP PREEMPT Sat Jul 28 12:04:36 MDT 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003e0f4000 (usable)
[ 0.000000] BIOS-e820: 000000003e0f4000 - 000000003e2f5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e2f5000 - 000000003eebe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003eebe000 - 000000003eeef000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] 96MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 254196) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 254196
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 254196
[ 0.000000] On node 0 totalpages: 254196
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 193 pages used for memmap
[ 0.000000] HighMem zone: 24627 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 3EEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
[ 0.000000] ACPI: FACP 3EEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
[ 0.000000] ACPI: DSDT 3EEF0000, 41E4 (r1 APPLE MacBook 20001 INTL 20050309)
[ 0.000000] ACPI: FACS 3EEC0000, 0040
[ 0.000000] ACPI: HPET 3EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 3EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 3EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 3EEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 3EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 3EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 3EEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3EEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
[ 0.000000] ACPI: SSDT 3EEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order. Total pages: 252211
[ 0.000000] Kernel command line: root=/dev/sda6 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c04c0000 soft=c04be000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1995.262 MHz processor.
[ 47.324283] Console: colour VGA+ 80x25
[ 47.324287] console [tty0] enabled
[ 47.329080] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 47.329500] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 47.356221] Memory: 1003100k/1016784k available (2465k kernel code, 13036k reserved, 1090k data, 244k init, 99280k highmem)
[ 47.356315] virtual kernel memory layout:
[ 47.356316] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB)
[ 47.356317] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 47.356318] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 47.356319] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 47.356320] .init : 0xc047e000 - 0xc04bb000 ( 244 kB)
[ 47.356321] .data : 0xc0368565 - 0xc0478f64 (1090 kB)
[ 47.356322] .text : 0xc0100000 - 0xc0368565 (2465 kB)
[ 47.356839] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 47.356993] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 47.357196] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 47.357436] hpet0: 3 64-bit timers, 14318180 Hz
[ 47.438473] Calibrating delay using timer specific routine.. 3994.64 BogoMIPS (lpj=7989282)
[ 47.438617] Security Framework v1.0.0 initialized
[ 47.438695] Mount-cache hash table entries: 512
[ 47.438871] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
[ 47.438878] monitor/mwait feature present.
[ 47.438942] using mwait in idle threads.
[ 47.439007] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 47.439115] CPU: L2 cache: 4096K
[ 47.439177] CPU: Physical Processor ID: 0
[ 47.439240] CPU: Processor Core ID: 0
[ 47.439303] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
[ 47.439311] Compat vDSO mapped to ffffe000.
[ 47.439383] Checking 'hlt' instruction... OK.
[ 47.454930] SMP alternatives: switching to UP code
[ 47.455993] ACPI: Core revision 20070126
[ 47.458211] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 47.458381] SMP alternatives: switching to SMP code
[ 47.459443] Booting processor 1/1 eip 3000
[ 47.459507] CPU 1 irqstacks, hard=c04c1000 soft=c04bf000
[ 47.470044] Initializing CPU#1
[ 47.550408] Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980123)
[ 47.550414] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
[ 47.550419] monitor/mwait feature present.
[ 47.550422] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 47.550424] CPU: L2 cache: 4096K
[ 47.550426] CPU: Physical Processor ID: 0
[ 47.550427] CPU: Processor Core ID: 1
[ 47.550428] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
[ 47.551169] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 47.551784] Total of 2 processors activated (7984.70 BogoMIPS).
[ 47.552044] ENABLING IO-APIC IRQs
[ 47.552302] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 47.698432] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 47.718551] Brought up 2 CPUs
[ 47.718926] Time: 4:26:19 Date: 06/29/107
[ 47.719008] NET: Registered protocol family 16
[ 47.719235] ACPI: bus type pci registered
[ 47.719381] PCI: Using MMCONFIG
[ 47.720175] Setting up standard PCI resources
[ 47.722674] ACPI: EC: EC description table is found, configuring boot EC
[ 47.724318] ACPI: System BIOS is requesting _OSI(Linux)
[ 47.724385] ACPI: If "acpi_osi=Linux" works better,
[ 47.724386] Please send dmidecode to linux-acpi@vger.kernel.org
[ 47.724899] ACPI: Interpreter enabled
[ 47.724963] ACPI: (supports S0 S3 S4 S5)
[ 47.725256] ACPI: Using IOAPIC for interrupt routing
[ 47.731327] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 47.732075] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 47.732145] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 47.732852] PCI: Transparent bridge - 0000:00:1e.0
[ 47.732965] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 47.733265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 47.733381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 47.733506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 47.740287] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 47.741014] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 47.741681] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 47.742410] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 47.743079] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 47.743848] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 47.744617] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 47.745285] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 47.745963] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 47.746057] pnp: PnP ACPI init
[ 47.746125] ACPI: bus type pnp registered
[ 47.747964] pnp: PnP ACPI: found 9 devices
[ 47.748028] ACPI: ACPI bus type pnp unregistered
[ 47.748258] SCSI subsystem initialized
[ 47.748358] libata version 2.21 loaded.
[ 47.748480] usbcore: registered new interface driver usbfs
[ 47.748597] usbcore: registered new interface driver hub
[ 47.748700] usbcore: registered new device driver usb
[ 47.748957] PCI: Using ACPI for IRQ routing
[ 47.749021] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 47.766294] Time: tsc clocksource has been installed.
[ 47.778544] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 47.778627] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 47.778709] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 47.778792] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 47.778879] pnp: 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 47.809285] PCI: Bridge: 0000:00:1c.0
[ 47.809350] IO window: 1000-1fff
[ 47.809416] MEM window: 50200000-502fffff
[ 47.809481] PREFETCH window: 50500000-505fffff
[ 47.809549] PCI: Bridge: 0000:00:1c.1
[ 47.809611] IO window: disabled.
[ 47.809676] MEM window: 50100000-501fffff
[ 47.809742] PREFETCH window: disabled.
[ 47.809808] PCI: Bridge: 0000:00:1e.0
[ 47.809870] IO window: disabled.
[ 47.809936] MEM window: 50000000-500fffff
[ 47.810001] PREFETCH window: disabled.
[ 47.810087] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 47.810216] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 47.810236] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[ 47.811137] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 47.811148] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 47.811158] NET: Registered protocol family 2
[ 47.850489] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 47.850622] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 47.851467] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 47.851865] TCP: Hash tables configured (established 131072 bind 65536)
[ 47.851934] TCP reno registered
[ 47.863121] audit: initializing netlink socket (disabled)
[ 47.863196] audit(1185683179.380:1): initialized
[ 47.863357] highmem bounce pool size: 64 pages
[ 47.865979] VFS: Disk quotas dquot_6.5.1
[ 47.866100] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 47.866432] io scheduler noop registered
[ 47.866507] io scheduler cfq registered (default)
[ 47.866579] Boot video device is 0000:00:02.0
[ 47.866861] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 47.866909] assign_interrupt_mode Found MSI capability
[ 47.867012] Allocate Port Service[0000:00:1c.0:pcie00]
[ 47.867048] Allocate Port Service[0000:00:1c.0:pcie02]
[ 47.867083] Allocate Port Service[0000:00:1c.0:pcie03]
[ 47.867173] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 47.867221] assign_interrupt_mode Found MSI capability
[ 47.867320] Allocate Port Service[0000:00:1c.1:pcie00]
[ 47.867357] Allocate Port Service[0000:00:1c.1:pcie02]
[ 47.867391] Allocate Port Service[0000:00:1c.1:pcie03]
[ 47.867642] ACPI: AC Adapter [ADP1] (on-line)
[ 47.868106] ACPI: Battery Slot [BAT0] (battery present)
[ 47.868283] input: Power Button (FF) as /class/input/input0
[ 47.868351] ACPI: Power Button (FF) [PWRF]
[ 47.868477] input: Lid Switch as /class/input/input1
[ 47.868547] ACPI: Lid Switch [LID0]
[ 47.868668] input: Power Button (CM) as /class/input/input2
[ 47.868734] ACPI: Power Button (CM) [PWRB]
[ 47.868856] input: Sleep Button (CM) as /class/input/input3
[ 47.868923] ACPI: Sleep Button (CM) [SLPB]
[ 47.869378] ACPI: SSDT 3EEB8C10, 026C (r1 APPLE Cpu0Ist 3000 INTL 20050309)
[ 47.869736] ACPI: SSDT 3EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
[ 47.870144] Monitor-Mwait will be used to enter C-1 state
[ 47.870147] Monitor-Mwait will be used to enter C-2 state
[ 47.870149] Monitor-Mwait will be used to enter C-3 state
[ 47.870167] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 47.870408] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 47.870791] ACPI: SSDT 3EEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
[ 47.871135] ACPI: SSDT 3EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
[ 47.871574] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 47.871815] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 47.873724] Marking TSC unstable due to: possible TSC halt in C2.
[ 47.874171] Time: hpet clocksource has been installed.
[ 47.874247] Switched to high resolution mode on CPU 0
[ 47.874267] Switched to high resolution mode on CPU 1
[ 47.908604] Real Time Clock Driver v1.12ac
[ 47.908916] hpet_resources: 0xfed00000 is busy
[ 47.908942] Linux agpgart interface v0.102
[ 47.909065] agpgart: Detected an Intel 945GM Chipset.
[ 47.910591] agpgart: Detected 16124K stolen memory.
[ 47.926048] agpgart: AGP aperture is 256M @ 0x40000000
[ 47.926233] ipmi message handler version 39.1
[ 47.926301] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
[ 47.926388] intelfb: Version 0.9.4
[ 47.926548] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 47.926679] intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory 16124kB
[ 47.928867] intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
[ 47.929047] intelfb: Video mode must be programmed at boot time.
[ 47.931869] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 47.932555] loop: module loaded
[ 47.932718] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 47.932850] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 47.932877] sky2 0000:01:00.0: v1.16 addr 0x50200000 irq 17 Yukon-EC (0xb6) rev 2
[ 47.933234] sky2 eth0: addr 00:17:f2:f5:aa:1f
[ 47.933485] input: Macintosh mouse button emulation as /class/input/input4
[ 47.934000] ata_piix 0000:00:1f.1: version 2.11
[ 47.934012] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 47.934163] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 47.934275] scsi0 : ata_piix
[ 47.934470] scsi1 : ata_piix
[ 47.934604] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120b0 irq 14
[ 47.934688] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120b8 irq 15
[ 47.940081] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KBV9, max UDMA/66
[ 47.942079] ata1.00: configured for UDMA/66
[ 47.943783] Clocksource tsc unstable (delta = -493154665 ns)
[ 47.957073] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KBV9 PQ: 0 ANSI: 5
[ 47.957370] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 47.960897] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 47.961066] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 47.961165] scsi2 : ata_piix
[ 47.961367] scsi3 : ata_piix
[ 47.961502] ata3: SATA max UDMA/133 cmd 0x000120c8 ctl 0x000120ee bmdma 0x000120a0 irq 19
[ 47.961586] ata4: SATA max UDMA/133 cmd 0x000120c0 ctl 0x000120ea bmdma 0x000120a8 irq 19
[ 47.993949] ata3.01: ATA-7: TOSHIBA MK1234GSX, AH008B, max UDMA/100
[ 47.994023] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/8)
[ 47.995255] ata3.01: configured for UDMA/100
[ 48.007285] scsi 2:0:1:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 48.007544] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 48.007625] sd 2:0:1:0: [sda] Write Protect is off
[ 48.007690] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 48.007707] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 48.007831] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 48.007907] sd 2:0:1:0: [sda] Write Protect is off
[ 48.007989] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 48.008005] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 48.008092] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 48.072777] sd 2:0:1:0: [sda] Attached SCSI disk
[ 48.073256] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 20
[ 48.073388] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 48.073391] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 48.073622] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 48.073733] ehci_hcd 0000:00:1d.7: debug port 1
[ 48.073801] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 48.073810] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x50445400
[ 48.077747] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 48.078106] usb usb1: configuration #1 chosen from 1 choice
[ 48.078254] hub 1-0:1.0: USB hub found
[ 48.078322] hub 1-0:1.0: 8 ports detected
[ 48.082483] USB Universal Host Controller Interface driver v3.0
[ 48.082616] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 48.082745] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 48.082748] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 48.082947] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 48.083054] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002080
[ 48.083352] usb usb2: configuration #1 chosen from 1 choice
[ 48.083480] hub 2-0:1.0: USB hub found
[ 48.083548] hub 2-0:1.0: 2 ports detected
[ 48.093712] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 48.093842] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 48.093845] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 48.094033] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 48.094139] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 48.094431] usb usb3: configuration #1 chosen from 1 choice
[ 48.094562] hub 3-0:1.0: USB hub found
[ 48.094629] hub 3-0:1.0: 2 ports detected
[ 48.104939] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 48.105068] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 48.105071] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 48.105258] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 48.105367] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 48.105653] usb usb4: configuration #1 chosen from 1 choice
[ 48.105781] hub 4-0:1.0: USB hub found
[ 48.105848] hub 4-0:1.0: 2 ports detected
[ 48.114783] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 48.127945] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 48.128074] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 48.128077] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 48.128267] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 48.128377] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00002020
[ 48.128660] usb usb5: configuration #1 chosen from 1 choice
[ 48.128789] hub 5-0:1.0: USB hub found
[ 48.128858] hub 5-0:1.0: 2 ports detected
[ 48.158977] usb 1-1: configuration #1 chosen from 1 choice
[ 48.159226] hub 1-1:1.0: USB hub found
[ 48.159392] hub 1-1:1.0: 2 ports detected
[ 48.653835] usb 1-4: new high speed USB device using ehci_hcd and address 4
[ 48.786290] usb 1-4: configuration #1 chosen from 1 choice
[ 49.633237] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 49.819551] usb 2-2: configuration #1 chosen from 1 choice
[ 50.196898] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 50.379023] usb 4-2: configuration #1 chosen from 1 choice
[ 50.620634] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 50.801782] usb 5-1: configuration #1 chosen from 1 choice
[ 51.004471] usb 1-1.1: new high speed USB device using ehci_hcd and address 7
[ 51.096893] usb 1-1.1: configuration #1 chosen from 1 choice
[ 51.097105] hub 1-1.1:1.0: USB hub found
[ 51.097304] hub 1-1.1:1.0: 4 ports detected
[ 51.400241] usb 1-1.2: new full speed USB device using ehci_hcd and address 8
[ 51.495590] usb 1-1.2: configuration #1 chosen from 1 choice
[ 51.495909] hub 1-1.2:1.0: USB hub found
[ 51.496312] hub 1-1.2:1.0: 3 ports detected
[ 51.800041] usb 1-1.1.1: new high speed USB device using ehci_hcd and address 9
[ 51.979190] usb 1-1.1.1: configuration #1 chosen from 1 choice
[ 52.179832] usb 1-1.1.2: new full speed USB device using ehci_hcd and address 10
[ 52.367661] usb 1-1.1.2: configuration #3 chosen from 1 choice
[ 52.575608] usb 1-1.1.4: new full speed USB device using ehci_hcd and address 11
[ 52.673977] usb 1-1.1.4: configuration #1 chosen from 1 choice
[ 52.875574] usb 1-1.2.2: new low speed USB device using ehci_hcd and address 12
[ 52.972818] usb 1-1.2.2: configuration #1 chosen from 1 choice
[ 53.171408] usb 1-1.2.3: new full speed USB device using ehci_hcd and address 13
[ 53.270216] usb 1-1.2.3: configuration #1 chosen from 1 choice
[ 53.271512] usbcore: registered new interface driver libusual
[ 53.271870] PNP: No PS/2 controller found. Probing ports directly.
[ 53.272807] i8042.c: No controller found.
[ 53.273088] mice: PS/2 mouse device common for all mice
[ 53.273232] applesmc: Apple MacBook detected:
[ 53.273300] applesmc: - Model with accelerometer
[ 53.273366] applesmc: - Model without light sensors and backlight
[ 53.273435] applesmc: - Model with 12 temperature sensors
[ 53.327566] applesmc: device successfully initialized (0xe0, 0x00).
[ 53.327568] applesmc: device successfully initialized.
[ 53.328727] applesmc: 1 fans found.
[ 53.330200] input: applesmc as /class/input/input5
[ 53.330345] applesmc: driver successfully loaded.
[ 53.330515] usbcore: registered new interface driver hiddev
[ 53.380649] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
[ 53.380737] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 53.383417] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
[ 53.383514] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[ 53.499334] input: HID 05ac:1000 as /class/input/input8
[ 53.499402] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 53.517320] input: HID 05ac:1000 as /class/input/input9
[ 53.517422] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[ 53.519326] input: Logitech Logitech USB Headset as /class/input/input10
[ 53.519441] input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.7-1.1.4
[ 53.522243] input: Logitech USB-PS/2 Optical Mouse as /class/input/input11
[ 53.522350] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2.2
[ 53.525902] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input12
[ 53.526008] input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.7-1.2.3
[ 53.530563] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input13
[ 53.530698] input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1d.7-1.2.3
[ 53.530925] usbcore: registered new interface driver usbhid
[ 53.530993] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 53.531152] TCP cubic registered
[ 53.531222] NET: Registered protocol family 1
[ 53.532006] Starting balanced_irq
[ 53.532096] Using IPI No-Shortcut mode
[ 53.532264] Magic number: 15:979:414
[ 53.559168] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 53.559242] EXT3-fs: write access will be enabled during recovery.
[ 58.040447] kjournald starting. Commit interval 5 seconds
[ 58.040462] EXT3-fs: sda6: orphan cleanup on readonly fs
[ 58.040469] ext3_orphan_cleanup: deleting unreferenced inode 133091
[ 58.061384] EXT3-fs: sda6: 1 orphan inode deleted
[ 58.061448] EXT3-fs: recovery complete.
[ 58.101247] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.101336] VFS: Mounted root (ext3 filesystem) readonly.
[ 58.101559] Freeing unused kernel memory: 244k freed
[ 66.439114] sky2 eth0: enabling interface
[ 66.454470] sky2 eth0: ram buffer 48K
[ 67.387008] iTCO_vendor_support: vendor-support=0
[ 67.402414] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 67.402555] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
[ 67.402656] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 67.492412] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 67.492505] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 67.515137] ath_hal: module license 'Proprietary' taints kernel.
[ 67.515906] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[ 67.691675] wlan: 0.8.4.2 (svn r2592)
[ 67.724798] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 67.724877] Uniform CD-ROM driver Revision: 3.20
[ 67.725021] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 67.739371] appletouch Geyser 3 inited.
[ 67.739488] input: appletouch as /class/input/input14
[ 67.739610] usbcore: registered new interface driver appletouch
[ 67.847317] cdc_acm 1-1.1.2:3.1: ttyACM0: USB ACM device
[ 67.850691] cdc_acm 1-1.1.2:3.3: ttyACM1: USB ACM device
[ 67.853011] usbcore: registered new interface driver cdc_acm
[ 67.853086] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 67.870766] ath_pci: 0.9.4.5 (svn r2592)
[ 67.870882] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 67.871023] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 67.926701] intel_rng: FWH not detected
[ 67.951267] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 67.967966] NET: Registered protocol family 17
[ 68.000119] ath_pci: switching rfkill capability off
[ 68.009362] usb0: register 'cdc_ether' at usb-0000:00:1d.7-1.1.2, CDC Ethernet Device, 02:80:37:0b:03:00
[ 68.009470] usbcore: registered new interface driver cdc_ether
[ 68.039165] ath_rate_sample: 1.2 (svn r2592)
[ 68.039650] ath_pci: switching per-packet transmit power control off
[ 68.039833] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 68.040329] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 68.040614] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 68.041278] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 68.041754] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 68.042227] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 68.042508] wifi0: mac 12.10 phy 8.1 radio 12.0
[ 68.042661] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 68.042728] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 68.042792] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 68.042856] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 68.042921] wifi0: Use hw queue 8 for CAB traffic
[ 68.042999] wifi0: Use hw queue 9 for beacons
[ 68.101828] wifi0: Atheros 5418: mem=0x50100000, irq=16
[ 68.101957] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 68.173937] firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.0
[ 68.414301] usbcore: registered new interface driver snd-usb-audio
[ 68.463085] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 68.463235] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 68.495128] hda_codec: STAC922x, Apple subsys_id=106b2200
[ 68.673733] firewire_core: created new fw device fw0 (0 config rom retries, S400)
[ 68.678021] lp: driver loaded but no devices found
[ 68.746082] Adding 4690972k swap on /dev/disk/by-uuid/a6ee3880-aa0d-43a9-859d-1ae554926afe. Priority:-1 extents:1 across:4690972k
[ 68.814898] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 68.883999] EXT3 FS on sda6, internal journal
[ 73.870467] NET: Registered protocol family 10
[ 73.870539] lo: Disabled Privacy Extensions
[ 75.016593] kjournald starting. Commit interval 5 seconds
[ 75.016962] EXT3 FS on sda5, internal journal
[ 75.016970] EXT3-fs: mounted filesystem with ordered data mode.
[ 75.035944] kjournald starting. Commit interval 5 seconds
[ 75.036382] EXT3 FS on sda7, internal journal
[ 75.036388] EXT3-fs: mounted filesystem with ordered data mode.
[ 77.788559] Capability LSM initialized
[ 78.534540] ppdev: user-space parallel port driver
[ 80.738151] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 80.900427] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 80.915235] NFSD: starting 90-second grace period
[ 82.339528] [drm] Initialized drm 1.1.0 20060810
[ 82.367815] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 83.895647] Bluetooth: Core ver 2.11
[ 83.895803] NET: Registered protocol family 31
[ 83.896060] Bluetooth: HCI device and connection manager initialized
[ 83.896417] Bluetooth: HCI socket layer initialized
[ 83.937903] Bluetooth: L2CAP ver 2.8
[ 83.937907] Bluetooth: L2CAP socket layer initialized
[ 84.128681] Bluetooth: RFCOMM socket layer initialized
[ 84.128756] Bluetooth: RFCOMM TTY layer initialized
[ 84.128760] Bluetooth: RFCOMM ver 1.8
[ 84.352169] usb 5-1: USB disconnect, address 2
[ 84.591927] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 84.790385] usb 5-1: configuration #1 chosen from 1 choice
[ 84.858873] Bluetooth: HCI USB driver ver 2.9
[ 84.862029] usbcore: registered new interface driver hci_usb
[ 94.218585] eth0: no IPv6 routers present
[ 165.489630] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 165.658623] ISO 9660 Extensions: RRIP_1991A
[31789.433005] usb 1-1.2.2: USB disconnect, address 12
[31794.362660] usb 1-1.2.2: new low speed USB device using ehci_hcd and address 15
[31794.460418] usb 1-1.2.2: configuration #1 chosen from 1 choice
[31794.464251] input: Logitech USB-PS/2 Optical Mouse as /class/input/input15
[31794.465100] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2.2
[32596.458613] keyboard.c: can't emulate rawmode for keycode 240
[32596.570530] keyboard.c: can't emulate rawmode for keycode 240
[32597.801877] keyboard.c: can't emulate rawmode for keycode 240
[32598.025726] keyboard.c: can't emulate rawmode for keycode 240
[32598.217642] keyboard.c: can't emulate rawmode for keycode 240
[32598.714939] keyboard.c: can't emulate rawmode for keycode 240
[32598.750935] keyboard.c: can't emulate rawmode for keycode 240
[32598.786909] keyboard.c: can't emulate rawmode for keycode 240
[32598.822872] keyboard.c: can't emulate rawmode for keycode 240
[32598.858866] keyboard.c: can't emulate rawmode for keycode 240
[32622.484216] printk: 3 messages suppressed.
[32622.484224] keyboard.c: can't emulate rawmode for keycode 240
[32622.516213] keyboard.c: can't emulate rawmode for keycode 240
[32622.516225] keyboard.c: can't emulate rawmode for keycode 240
[32622.548176] keyboard.c: can't emulate rawmode for keycode 240
[32622.548191] keyboard.c: can't emulate rawmode for keycode 240
[32628.137737] usb 1-1.2.2: USB disconnect, address 15
[32629.742112] usb 1-1.2.2: new low speed USB device using ehci_hcd and address 16
[32629.839998] usb 1-1.2.2: configuration #1 chosen from 1 choice
[32629.843714] input: Logitech USB-PS/2 Optical Mouse as /class/input/input16
[32629.844152] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.2.2
[32634.229727] drivers/hid/usbhid/hid-core.c: input irq status -75 received
[-- Attachment #3: 2.6.23.config --]
[-- Type: application/octet-stream, Size: 48176 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc1
# Sun Jul 29 14:56:32 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CPUSETS=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MCORE2=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_EFI=y
CONFIG_IRQBALANCE=y
CONFIG_BOOT_IOREMAP=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
CONFIG_PM_TRACE=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=2000
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
# CONFIG_KINGSUN_DONGLE is not set
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_WIRELESS_EXT=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_TUNER_TEA5761 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_QUICKCAM_MESSENGER=m
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386
#
# CONFIG_DEBUG_RODATA is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
# CONFIG_SECURITY_SELINUX is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: USB-related instability on 2.6.23-rc1
2007-07-31 21:06 USB-related instability on 2.6.23-rc1 Grant Likely
@ 2007-07-31 21:24 ` Greg KH
2007-07-31 21:26 ` Grant Likely
2007-07-31 21:29 ` Stuart_Hayes
0 siblings, 2 replies; 6+ messages in thread
From: Greg KH @ 2007-07-31 21:24 UTC (permalink / raw)
To: Grant Likely, linux-usb-devel
Cc: Linux Kernel Mailing List, Stuart Hayes, David Brownell
On Tue, Jul 31, 2007 at 03:06:07PM -0600, Grant Likely wrote:
> I've observed instability on my Macbook c2d with the Linus' latest
> tree. Symptom is that USB devices start behaving badly and the kernel
> seems to be registering incorrect HID events; (ie. moving the mouse
> causes odd keyboard events). If I continue to attempt to use the
> mouse, it results in a system freeze (and I don't see any kind of
> backtrace in /var/log/kern.log). To reproduce the problem, I just
> need to be using the keyboard/mouse. If I leave the system idle, the
> problem does not seem to occur. If I actively use the keyboard/mouse,
> the problem can occur at any time; usually within 5-10 minutes.
>
> In my particular case, I've got both a USB key/mouse pair on the
> laptop and an external key/mouse pair plugged in via a hub.
> Typically, it's the external mouse that exhibits badness first.
>
> USB HID devices are definitely affected. I have not tested USB block
> devices. Isochronous transfers to a USB headset appear to be
> unaffected, but that's under minimal testing.
>
> I've bisected down to commit 196705c9bbc03540429b0f7cf9ee35c2f928a534,
> "USB: EHCI cpufreq fix"
>
> Reverting the patch at the head of the tree makes the kernel stable again.
>
> I've attached my kernel config file and a dmesg output
Can you enable CONFIG_USB_DEBUG and send the linux-usb-devel list and
us, the output when you have these problems?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: USB-related instability on 2.6.23-rc1
2007-07-31 21:24 ` Greg KH
@ 2007-07-31 21:26 ` Grant Likely
2007-07-31 22:57 ` Greg KH
2007-07-31 21:29 ` Stuart_Hayes
1 sibling, 1 reply; 6+ messages in thread
From: Grant Likely @ 2007-07-31 21:26 UTC (permalink / raw)
To: Greg KH
Cc: linux-usb-devel, Linux Kernel Mailing List, Stuart Hayes, David Brownell
On 7/31/07, Greg KH <greg@kroah.com> wrote:
> On Tue, Jul 31, 2007 at 03:06:07PM -0600, Grant Likely wrote:
> > I've attached my kernel config file and a dmesg output
>
> Can you enable CONFIG_USB_DEBUG and send the linux-usb-devel list and
> us, the output when you have these problems?
Yes, I'll compile up a kernel right a way and do so.
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: USB-related instability on 2.6.23-rc1
2007-07-31 21:24 ` Greg KH
2007-07-31 21:26 ` Grant Likely
@ 2007-07-31 21:29 ` Stuart_Hayes
2007-07-31 23:21 ` Grant Likely
1 sibling, 1 reply; 6+ messages in thread
From: Stuart_Hayes @ 2007-07-31 21:29 UTC (permalink / raw)
To: greg, grant.likely, linux-usb-devel; +Cc: linux-kernel, dbrownell
Greg KH wrote:
> On Tue, Jul 31, 2007 at 03:06:07PM -0600, Grant Likely wrote:
>> I've observed instability on my Macbook c2d with the Linus' latest
>> tree. Symptom is that USB devices start behaving badly and the
>> kernel seems to be registering incorrect HID events; (ie. moving the
>> mouse causes odd keyboard events). If I continue to attempt to use
>> the
>> mouse, it results in a system freeze (and I don't see any kind of
>> backtrace in /var/log/kern.log). To reproduce the problem, I just
>> need to be using the keyboard/mouse. If I leave the system idle, the
>> problem does not seem to occur. If I actively use the
>> keyboard/mouse, the problem can occur at any time; usually within
>> 5-10 minutes.
>>
>> In my particular case, I've got both a USB key/mouse pair on the
>> laptop and an external key/mouse pair plugged in via a hub.
>> Typically, it's the external mouse that exhibits badness first.
>>
>> USB HID devices are definitely affected. I have not tested USB block
>> devices. Isochronous transfers to a USB headset appear to be
>> unaffected, but that's under minimal testing.
>>
>> I've bisected down to commit
>> 196705c9bbc03540429b0f7cf9ee35c2f928a534, "USB: EHCI cpufreq fix"
>>
>> Reverting the patch at the head of the tree makes the kernel stable
>> again.
>>
>> I've attached my kernel config file and a dmesg output
>
> Can you enable CONFIG_USB_DEBUG and send the linux-usb-devel list and
> us, the output when you have these problems?
>
> thanks,
>
> greg k-h
I'm actually in the process right now of attaching a patch for this
problem (well, I hope it's a patch for the problem you're seeing) right
now on the bugzilla (bug 8535 at bugzilla.kernel.org). If you'd like to
test it, that would be great.
Thanks,
Stuart
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: USB-related instability on 2.6.23-rc1
2007-07-31 21:26 ` Grant Likely
@ 2007-07-31 22:57 ` Greg KH
0 siblings, 0 replies; 6+ messages in thread
From: Greg KH @ 2007-07-31 22:57 UTC (permalink / raw)
To: Grant Likely
Cc: linux-usb-devel, Linux Kernel Mailing List, Stuart Hayes, David Brownell
On Tue, Jul 31, 2007 at 03:26:55PM -0600, Grant Likely wrote:
> On 7/31/07, Greg KH <greg@kroah.com> wrote:
> > On Tue, Jul 31, 2007 at 03:06:07PM -0600, Grant Likely wrote:
> > > I've attached my kernel config file and a dmesg output
> >
> > Can you enable CONFIG_USB_DEBUG and send the linux-usb-devel list and
> > us, the output when you have these problems?
>
> Yes, I'll compile up a kernel right a way and do so.
If you could test out Stuart's patch and let me know if it solves the
problem, or not, for you, that would be greatly appreciated.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: USB-related instability on 2.6.23-rc1
2007-07-31 21:29 ` Stuart_Hayes
@ 2007-07-31 23:21 ` Grant Likely
0 siblings, 0 replies; 6+ messages in thread
From: Grant Likely @ 2007-07-31 23:21 UTC (permalink / raw)
To: Stuart_Hayes; +Cc: greg, linux-usb-devel, linux-kernel, dbrownell
On 7/31/07, Stuart_Hayes@dell.com <Stuart_Hayes@dell.com> wrote:
> Greg KH wrote:
> > On Tue, Jul 31, 2007 at 03:06:07PM -0600, Grant Likely wrote:
> >> I've attached my kernel config file and a dmesg output
> >
> > Can you enable CONFIG_USB_DEBUG and send the linux-usb-devel list and
> > us, the output when you have these problems?
> >
> > thanks,
> >
> > greg k-h
>
> I'm actually in the process right now of attaching a patch for this
> problem (well, I hope it's a patch for the problem you're seeing) right
> now on the bugzilla (bug 8535 at bugzilla.kernel.org). If you'd like to
> test it, that would be great.
I've tested the patch, it appears to be working now, thanks!
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-07-31 23:21 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-07-31 21:06 USB-related instability on 2.6.23-rc1 Grant Likely
2007-07-31 21:24 ` Greg KH
2007-07-31 21:26 ` Grant Likely
2007-07-31 22:57 ` Greg KH
2007-07-31 21:29 ` Stuart_Hayes
2007-07-31 23:21 ` Grant Likely
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®