From: "Scott Thompson" <postfail@hushmail.com>
To: <linux-kernel@vger.kernel.org>, <kernel-janitors@vger.kernel.org>,
<dri-devel@lists.sourceforge.net>
Subject: [PATCH 1 of 5 ] /drivers/char ioremap balancing/ returncode check
Date: Mon, 13 Aug 2007 00:00:38 -0400 [thread overview]
Message-ID: <20070813040039.71A3DDA820@mailserver8.hushmail.com> (raw)
patchset against 2.6.23-rc2 and this set is an audit of
/drivers/char/a*
through drivers/char .
this corrects missing ioremap return checks and balancing on
iounmap calls..
Signed-off-by: Scott Thompson <postfail <at> hushmail.com>
----------------------------------------------------------
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 77bf4aa..53d233e 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -936,6 +936,12 @@ static acpi_status hpet_resources(struct
acpi_resource *res, void *data)
hdp->hd_phys_address = addr.minimum;
hdp->hd_address = ioremap(addr.minimum, addr.address_length);
+ if (!hdp->hd_address) {
+ printk(KERN_DEBUG "%s: ioremap failed\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
if (hpet_is_known(hdp)) {
printk(KERN_DEBUG "%s: 0x%lx is busy\n",
__FUNCTION__, hdp->hd_phys_address);
@@ -953,6 +959,12 @@ static acpi_status hpet_resources(struct
acpi_resource *res, void *data)
hdp->hd_address = ioremap(fixmem32->address,
HPET_RANGE_SIZE);
+ if (!hdp->hd_address) {
+ printk(KERN_DEBUG "%s: ioremap failed\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
if (hpet_is_known(hdp)) {
printk(KERN_DEBUG "%s: 0x%lx is busy\n",
__FUNCTION__, hdp->hd_phys_address);
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index ed76f0a..094323d 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -447,6 +447,13 @@ static int __init moxa_init(void)
for (i = 0; i < numBoards; i++) {
moxa_boards[i].basemem = ioremap(moxa_boards[i].baseAddr,
0x4000);
+ if (!moxa_boards[i].basemem) {
+ for (;i > 0;i--)
+ if (moxa_boards[i].basemem)
+ iounmap(moxa_boards[i].basemem);
+
+ return -ENOMEM;
+ }
}
return retval;
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 85a2328..30829ed 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -2627,6 +2627,12 @@ static void __devinit fix_sx_pci(struct
pci_dev *pdev, struct sx_board *board)
pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase);
hwbase &= PCI_BASE_ADDRESS_MEM_MASK;
rebase = ioremap(hwbase, 0x80);
+ if (!rebase) {
+ printk(KERN_DEBUG
+ "sx:ioremap fail, unable to perform cntrl reg fix\n");
+ return;
+ }
+
t = readl(rebase + CNTRL_REG_OFFSET);
if (t != CNTRL_REG_GOODVALUE) {
printk(KERN_DEBUG "sx: performing cntrl reg fix: %08x -> "
diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c
index e5ed091..2381162 100644
--- a/drivers/char/vr41xx_giu.c
+++ b/drivers/char/vr41xx_giu.c
@@ -639,8 +639,10 @@ static int __devinit giu_probe(struct
platform_device *dev)
}
irq = platform_get_irq(dev, 0);
- if (irq < 0 || irq >= NR_IRQS)
+ if (irq < 0 || irq >= NR_IRQS) {
+ iounmap(giu_base);
return -EBUSY;
+ }
return cascade_irq(irq, giu_get_irq);
}
next reply other threads:[~2007-08-13 4:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-13 4:00 Scott Thompson [this message]
2007-08-13 20:17 ` Jiri Slaby
2007-08-15 4:35 Scott Thompson
2007-08-15 19:36 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070813040039.71A3DDA820@mailserver8.hushmail.com \
--to=postfail@hushmail.com \
--cc=dri-devel@lists.sourceforge.net \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®