* [M68KNOMMU]: remove use of undefined symbols in setup.c
@ 2007-10-19 4:33 Greg Ungerer
0 siblings, 0 replies; 2+ messages in thread
From: Greg Ungerer @ 2007-10-19 4:33 UTC (permalink / raw)
To: torvalds; +Cc: gerg, linux-kernel
Remove use of undefined symbols CONFIG_TELOS, CONFIG_M68EZ328ADS
and CONFIG_ALMA_ANS.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
diff -Naurp linux-2.6.23/arch/m68knommu/kernel/setup.c linux-2.6.23-uc0/arch/m68knommu/kernel/setup.c
--- linux-2.6.23/arch/m68knommu/kernel/setup.c 2007-10-19 10:30:54.000000000 +1000
+++ linux-2.6.23-uc0/arch/m68knommu/kernel/setup.c 2007-10-19 10:35:38.000000000 +1000
@@ -151,27 +148,15 @@ void setup_arch(char **cmdline_p)
#ifdef CONFIG_ELITE
printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
#endif
-#ifdef CONFIG_TELOS
- printk(KERN_INFO "Modified for Omnia ToolVox by James D. Schettine, james@telos-systems.com\n");
-#endif
#endif
printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
#if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )
printk(KERN_INFO "TRG SuperPilot FLASH card support <info@trgnet.com>\n");
#endif
-
#if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
#endif
-
-#ifdef CONFIG_M68EZ328ADS
- printk(KERN_INFO "M68EZ328ADS board support (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>\n");
-#endif
-
-#ifdef CONFIG_ALMA_ANS
- printk(KERN_INFO "Alma Electronics board support (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>\n");
-#endif
#if defined (CONFIG_M68360)
printk(KERN_INFO "QUICC port done by SED Systems <hamilton@sedsystems.ca>,\n");
printk(KERN_INFO "based on 2.0.38 port by Lineo Inc. <mleslie@lineo.com>.\n");
^ permalink raw reply [flat|nested] 2+ messages in thread
* [M68KNOMMU]: remove use of undefined symbols in setup.c
@ 2007-10-23 4:37 Greg Ungerer
0 siblings, 0 replies; 2+ messages in thread
From: Greg Ungerer @ 2007-10-23 4:37 UTC (permalink / raw)
To: torvalds; +Cc: gerg, linux-kernel
Remove use of undefined symbols CONFIG_TELOS, CONFIG_M68EZ328ADS
and CONFIG_ALMA_ANS.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
diff -Naurp linux-2.6.23/arch/m68knommu/kernel/setup.c linux-2.6.23-uc0/arch/m68knommu/kernel/setup.c
--- linux-2.6.23/arch/m68knommu/kernel/setup.c 2007-10-19 10:30:54.000000000 +1000
+++ linux-2.6.23-uc0/arch/m68knommu/kernel/setup.c 2007-10-19 10:35:38.000000000 +1000
@@ -151,27 +148,15 @@ void setup_arch(char **cmdline_p)
#ifdef CONFIG_ELITE
printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
#endif
-#ifdef CONFIG_TELOS
- printk(KERN_INFO "Modified for Omnia ToolVox by James D. Schettine, james@telos-systems.com\n");
-#endif
#endif
printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
#if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )
printk(KERN_INFO "TRG SuperPilot FLASH card support <info@trgnet.com>\n");
#endif
-
#if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
#endif
-
-#ifdef CONFIG_M68EZ328ADS
- printk(KERN_INFO "M68EZ328ADS board support (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>\n");
-#endif
-
-#ifdef CONFIG_ALMA_ANS
- printk(KERN_INFO "Alma Electronics board support (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>\n");
-#endif
#if defined (CONFIG_M68360)
printk(KERN_INFO "QUICC port done by SED Systems <hamilton@sedsystems.ca>,\n");
printk(KERN_INFO "based on 2.0.38 port by Lineo Inc. <mleslie@lineo.com>.\n");
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-10-23 4:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-10-19 4:33 [M68KNOMMU]: remove use of undefined symbols in setup.c Greg Ungerer
2007-10-23 4:37 Greg Ungerer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®