[PATCH]: add configure support for new ColdFire serial driver

[PATCH]: add configure support for new ColdFire serial driver

[Greg Ungerer]

Add configure support for the new style ColdFire serial driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---

diff -Naurp linux-2.6.23-rc1/drivers/serial/Kconfig linux-2.6.23-rc1.platform/drivers/serial/Kconfig
--- linux-2.6.23-rc1/drivers/serial/Kconfig	2007-10-25 10:49:13.000000000 +1000
+++ linux-2.6.23-rc1.platform/drivers/serial/Kconfig	2007-10-30 11:20:44.000000000 +1000
@@ -960,6 +960,30 @@ config SERIAL_COLDFIRE
 	  This driver supports the built-in serial ports of the Motorola ColdFire
 	  family of CPUs.
 
+config SERIAL_MCF
+	bool "Coldfire serial support (new style driver)"
+	depends on COLDFIRE
+	select SERIAL_CORE
+	help
+	  This new serial driver supports the Freescale Coldfire serial ports
+	  using the new serial driver subsystem.
+
+config SERIAL_MCF_BAUDRATE
+	int "Default baudrate for Coldfire serial ports"
+	depends on SERIAL_MCF
+	default 19200
+	help
+	  This setting lets you define what the default baudrate is for the
+	  ColdFire serial ports. The usual default varies from board to board,
+	  and this setting is a way of catering for that.
+
+config SERIAL_MCF_CONSOLE
+	bool "Coldfire serial console support"
+	depends on SERIAL_MCF
+	select SERIAL_CORE_CONSOLE
+	help
+	  Enable a ColdFire internal serial port to be the system console.
+
 config SERIAL_68360_SMC
 	bool "68360 SMC uart support"
 	depends on M68360