* [PATCH 02/12] proc: switch /proc/driver/radio-typhoon to seq_file interface
@ 2008-04-08 14:51 Alexey Dobriyan
0 siblings, 0 replies; only message in thread
From: Alexey Dobriyan @ 2008-04-08 14:51 UTC (permalink / raw)
To: akpm; +Cc: devel, linux-kernel
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
---
drivers/media/radio/radio-typhoon.c | 40 ++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 17 deletions(-)
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -35,6 +35,7 @@
#include <linux/init.h> /* Initdata */
#include <linux/ioport.h> /* request_region */
#include <linux/proc_fs.h> /* radio card status report */
+#include <linux/seq_file.h>
#include <asm/io.h> /* outb, outb_p */
#include <asm/uaccess.h> /* copy to/from user */
#include <linux/videodev2.h> /* kernel radio structs */
@@ -93,9 +94,6 @@ static int typhoon_setfreq(struct typhoon_device *dev, unsigned long frequency);
static void typhoon_mute(struct typhoon_device *dev);
static void typhoon_unmute(struct typhoon_device *dev);
static int typhoon_setvol(struct typhoon_device *dev, int vol);
-#ifdef CONFIG_RADIO_TYPHOON_PROC_FS
-static int typhoon_get_info(char *buf, char **start, off_t offset, int len);
-#endif
static void typhoon_setvol_generic(struct typhoon_device *dev, int vol)
{
@@ -368,30 +366,39 @@ static struct video_device typhoon_radio =
#ifdef CONFIG_RADIO_TYPHOON_PROC_FS
-static int typhoon_get_info(char *buf, char **start, off_t offset, int len)
+static int typhoon_proc_show(struct seq_file *m, void *v)
{
- char *out = buf;
-
#ifdef MODULE
#define MODULEPROCSTRING "Driver loaded as a module"
#else
#define MODULEPROCSTRING "Driver compiled into kernel"
#endif
- /* output must be kept under PAGE_SIZE */
- out += sprintf(out, BANNER);
- out += sprintf(out, "Load type: " MODULEPROCSTRING "\n\n");
- out += sprintf(out, "frequency = %lu kHz\n",
+ seq_puts(m, BANNER);
+ seq_puts(m, "Load type: " MODULEPROCSTRING "\n\n");
+ seq_printf(m, "frequency = %lu kHz\n",
typhoon_unit.curfreq >> 4);
- out += sprintf(out, "volume = %d\n", typhoon_unit.curvol);
- out += sprintf(out, "mute = %s\n", typhoon_unit.muted ?
+ seq_printf(m, "volume = %d\n", typhoon_unit.curvol);
+ seq_printf(m, "mute = %s\n", typhoon_unit.muted ?
"on" : "off");
- out += sprintf(out, "iobase = 0x%x\n", typhoon_unit.iobase);
- out += sprintf(out, "mute frequency = %lu kHz\n",
+ seq_printf(m, "iobase = 0x%x\n", typhoon_unit.iobase);
+ seq_printf(m, "mute frequency = %lu kHz\n",
typhoon_unit.mutefreq >> 4);
- return out - buf;
+ return 0;
}
+static int typhoon_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, typhoon_proc_show, NULL);
+}
+
+static const struct file_operations typhoon_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = typhoon_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif /* CONFIG_RADIO_TYPHOON_PROC_FS */
MODULE_AUTHOR("Dr. Henrik Seidel");
@@ -452,8 +459,7 @@ static int __init typhoon_init(void)
typhoon_mute(&typhoon_unit);
#ifdef CONFIG_RADIO_TYPHOON_PROC_FS
- if (!create_proc_info_entry("driver/radio-typhoon", 0, NULL,
- typhoon_get_info))
+ if (!proc_create("driver/radio-typhoon", 0, NULL, &typhoon_proc_fops))
printk(KERN_ERR "radio-typhoon: registering /proc/driver/radio-typhoon failed\n");
#endif
--
1.5.4.3
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-04-08 14:52 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-04-08 14:51 [PATCH 02/12] proc: switch /proc/driver/radio-typhoon to seq_file interface Alexey Dobriyan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®