appletouch after wakeup

appletouch after wakeup

[Justin Mattock]

Hello; with 2.6.26-rc3 I've notice appletouch is going out of whack,
here's what I see after waking the machine from suspend,
[ 8186.661313] appletouch: incomplete data package (first byte: 2, length: 4).
Keep in mind there is not just one of these messages, the entire dmesg
is filled.

Also I decided to watch some DVD's and noticed this when using mplayer:
[14852.274794] end_request: I/O error, dev sr0, sector 11083800
[14852.276264] sr 0:0:0:0: [sr0] Device not ready: Sense Key : 0x2 [current]
[14852.276264] sr 0:0:0:0: [sr0] Device not ready: ASC=0x3a ASCQ=0x0
The same as appletouch, the entire dmesg is filled. Now during my
entertaining night  with will smith, jodie foster, and matt daemon I
did pause the movie to
take five. So maybe this might have cause the unalignment.
regards;

-- 
Justin P. Mattock

Re: appletouch after wakeup

[Oliver Neukum]

Am Dienstag, 27. Mai 2008 05:29:04 schrieb Justin Mattock:
> Hello; with 2.6.26-rc3 I've notice appletouch is going out of whack,
> here's what I see after waking the machine from suspend,
> [ 8186.661313] appletouch: incomplete data package (first byte: 2, length: 4).
> Keep in mind there is not just one of these messages, the entire dmesg
> is filled.

Immediately after resumption? STR or STD?

	Regards
		Oliver

Re: appletouch after wakeup

[Justin Mattock]

On Tue, May 27, 2008 at 8:40 AM, Oliver Neukum <oliver@neukum.org> wrote:
> Am Dienstag, 27. Mai 2008 05:29:04 schrieb Justin Mattock:
>> Hello; with 2.6.26-rc3 I've notice appletouch is going out of whack,
>> here's what I see after waking the machine from suspend,
>> [ 8186.661313] appletouch: incomplete data package (first byte: 2, length: 4).
>> Keep in mind there is not just one of these messages, the entire dmesg
>> is filled.
>
> Immediately after resumption? STR or STD?
>
>        Regards
>                Oliver
>
>

I have to admit I don't know what STR or STD is for computer terminology!!
regards;

-- 
Justin P. Mattock

Re: appletouch after wakeup

[Justin Mattock]

On Tue, May 27, 2008 at 3:06 PM, Ray Lee <ray-lk@madrabbit.org> wrote:
> On Tue, May 27, 2008 at 8:04 AM, Justin Mattock <justinmattock@gmail.com> wrote:
>> On Tue, May 27, 2008 at 8:40 AM, Oliver Neukum <oliver@neukum.org> wrote:
>>> Am Dienstag, 27. Mai 2008 05:29:04 schrieb Justin Mattock:
>>>> Hello; with 2.6.26-rc3 I've notice appletouch is going out of whack,
>>>> here's what I see after waking the machine from suspend,
>>>> [ 8186.661313] appletouch: incomplete data package (first byte: 2, length: 4).
>>>> Keep in mind there is not just one of these messages, the entire dmesg
>>>> is filled.
>>>
>>> Immediately after resumption? STR or STD?
>>>
>>>        Regards
>>>                Oliver
>>>
>>>
>>
>> I have to admit I don't know what STR or STD is for computer terminology!!
>> regards;
>
> STR == Suspend To RAM, STD == Suspend To Disk
>
> Ray
>

Something so simple, yet so difficult. Then to answer the question
properly it would be STR or
echo mem > /sys/power/state
regards;
-- 
Justin P. Mattock