From: Randy Dunlap <randy.dunlap@oracle.com>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: Olaf Dabrunz <od@suse.de>, Ingo Molnar <mingo@elte.hu>,
"H. Peter Anvin" <hpa@zytor.com>,
Jon Masters <jonathan@jonmasters.org>,
LKML <linux-kernel@vger.kernel.org>,
Stefan Assmann <sassmann@suse.de>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Jesse Barnes <jbarnes@virtuousgeek.org>
Subject: Re: [PATCH 2/7] reroute PCI interrupt to legacy boot interrupt equivalent
Date: Tue, 3 Jun 2008 15:59:03 -0700 [thread overview]
Message-ID: <20080603155903.4bec13b9.randy.dunlap@oracle.com> (raw)
In-Reply-To: <alpine.LFD.1.10.0806031213360.3235@apollo.tec.linutronix.de>
On Tue, 3 Jun 2008 12:37:58 +0200 (CEST) Thomas Gleixner wrote:
> On Mon, 2 Jun 2008, Olaf Dabrunz wrote:
> > From: Stefan Assmann <sassmann@suse.de>
> >
> > Some chipsets (e.g. intel 6700PXH) generate a legacy INTx when the
> > IRQ entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel
> > does during interrupt handling). On chipsets where this INTx generation
> > cannot be disabled, we reroute the valid interrupts to their legacy
> > equivalent to get rid of spurious interrupts that might otherwise bring
> > down (vital) interrupt lines through spurious interrupt detection in
> > note_interrupt().
> >
> > The patch should eventually simply use another bitfield in the pci_dev
> > structure for the rerouting variant. This was in another variant of the patch
> > by Daniel Gollub. It is the cleanest and most simple approach.
> >
> > This patch benefited from discussions with Alexander Graf, Torsten Duwe,
> > Ihno Krumreich, Daniel Gollub, Hannes Reinecke. The conclusions we drew
> > and the patch itself are the authors' responsibility alone.
> >
> > Signed-off-by: Stefan Assmann <sassmann@suse.de>
> > Signed-off-by: Olaf Dabrunz <od@suse.de>
> > ---
> > drivers/acpi/pci_irq.c | 63 ++++++++++++++++++++++++++++++++++++++++++++
> > drivers/pci/quirks.c | 51 ++++++++++++++++++++++++++++++++++-
> > include/linux/pci.h | 2 +
> > include/linux/pci_ids.h | 4 +++
> > include/linux/pci_quirks.h | 28 +++++++++++++++++++
> > 5 files changed, 147 insertions(+), 1 deletions(-)
> > create mode 100644 include/linux/pci_quirks.h
> >
> > diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> > index 89022a7..ebdfbfe 100644
> > --- a/drivers/acpi/pci_irq.c
> > +++ b/drivers/acpi/pci_irq.c
> > @@ -384,6 +384,34 @@ acpi_pci_free_irq(struct acpi_prt_entry *entry,
> > return irq;
> > }
> >
> > +#ifdef CONFIG_X86_IO_APIC
> > +static int
> > +bridge_has_boot_interrupt_variant(struct pci_bus *bus)
>
> one line
>
> > +{
> > + struct pci_bus *bus_it;
> > + int i;
> > +
> > + for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) {
Along with Thomas's comments:
spacing:
for (bus_it = bus; bus_it; bus_it = bus_it->parent) {
and additions to Documentation/kernel-parameters.txt, please.
> > + if (!bus_it->self)
> > + return 0;
> > +
> > + printk(KERN_INFO "vendor=%04x device=%04x\n", bus_it->self->vendor,
> > + bus_it->self->device);
> > + for (i = 0; i < MAX_QUIRK_BOOTIRQ_REROUTE_DEVS; i++) {
> > + if (quirk_bootirq_reroute_devs[i].vendor == 0)
> > + return 0;
> > +
> > + if (quirk_bootirq_reroute_devs[i].vendor == bus_it->self->vendor &&
> > + quirk_bootirq_reroute_devs[i].device == bus_it->self->device)
> > + return quirk_bootirq_reroute_devs[i].quirk_variant;
> > + }
> > + }
> > + return 0;
> > +}
---
~Randy
next prev parent reply other threads:[~2008-06-03 23:01 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-02 12:45 [PATCH 0/7] Boot IRQ quirks and rerouting Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 1/7] add kernel cmdline option to disable pci-irq quirks Olaf Dabrunz
2008-06-03 10:13 ` Thomas Gleixner
2008-06-03 17:00 ` Stefan Assmann
2008-06-02 12:45 ` [PATCH 2/7] reroute PCI interrupt to legacy boot interrupt equivalent Olaf Dabrunz
2008-06-03 10:37 ` Thomas Gleixner
2008-06-03 22:59 ` Randy Dunlap [this message]
2008-06-12 14:14 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 3/7] disable legacy boot interrupt generation Olaf Dabrunz
2008-06-03 10:40 ` Thomas Gleixner
2008-06-02 12:45 ` [PATCH 4/7] disable broadcomm " Olaf Dabrunz
2008-06-03 10:46 ` Thomas Gleixner
2008-06-03 15:46 ` Jon Masters
2008-06-03 15:59 ` Olaf Dabrunz
2008-06-03 16:05 ` Jon Masters
2008-06-03 17:27 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 5/7] disable AMD/ATI " Olaf Dabrunz
2008-06-03 10:54 ` Thomas Gleixner
2008-06-12 14:14 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 6/7] disable pci legacy boot irq quirks on noapic boot Olaf Dabrunz
2008-06-03 10:55 ` Thomas Gleixner
2008-06-02 12:45 ` [PATCH 7/7] bootirqquirk= parameter to enable bootirq quirks for additional chips Olaf Dabrunz
2008-06-03 10:56 ` Thomas Gleixner
2008-06-04 10:06 ` Olaf Dabrunz
2008-06-02 16:43 ` [PATCH 0/7] Boot IRQ quirks and rerouting Olaf Dabrunz
2008-06-03 10:11 ` Thomas Gleixner
2008-06-03 17:08 ` Olaf Dabrunz
2008-06-03 10:21 ` Olaf Dabrunz
2008-06-03 15:52 ` Jon Masters
2008-06-03 16:17 ` Stefan Assmann
2008-06-03 16:56 ` Olaf Dabrunz
2008-06-04 2:35 ` Eric W. Biederman
2008-06-04 9:49 ` Stefan Assmann
2008-06-04 10:45 ` Eric W. Biederman
2008-06-04 11:33 ` Stefan Assmann
2008-06-04 15:52 ` Maciej W. Rozycki
2008-06-04 16:08 ` Thomas Gleixner
2008-06-04 17:18 ` Maciej W. Rozycki
2008-06-04 17:33 ` Thomas Gleixner
2008-06-04 17:53 ` Maciej W. Rozycki
2008-06-04 18:35 ` Thomas Gleixner
2008-06-04 18:51 ` Maciej W. Rozycki
2010-02-16 0:30 ` Yuhong Bao
2008-06-04 18:57 ` Jon Masters
2008-06-04 19:19 ` Maciej W. Rozycki
2008-06-04 19:59 ` Jon Masters
2008-06-04 22:07 ` Maciej W. Rozycki
2008-06-04 22:27 ` Jon Masters
2008-06-04 23:08 ` Maciej W. Rozycki
2008-06-04 11:37 ` Olaf Dabrunz
2008-06-04 18:44 ` Jon Masters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080603155903.4bec13b9.randy.dunlap@oracle.com \
--to=randy.dunlap@oracle.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=jonathan@jonmasters.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=od@suse.de \
--cc=sassmann@suse.de \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome