From: Thomas Gleixner <tglx@linutronix.de>
To: Olaf Dabrunz <od@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>, "H. Peter Anvin" <hpa@zytor.com>,
Jon Masters <jonathan@jonmasters.org>,
linux-kernel@vger.kernel.org, Stefan Assmann <sassmann@suse.de>
Subject: Re: [PATCH 7/7] bootirqquirk= parameter to enable bootirq quirks for additional chips
Date: Tue, 3 Jun 2008 12:56:28 +0200 (CEST) [thread overview]
Message-ID: <alpine.LFD.1.10.0806031255230.3235@apollo.tec.linutronix.de> (raw)
In-Reply-To: <1212410707427-git-send-email-od@suse.de>
On Mon, 2 Jun 2008, Olaf Dabrunz wrote:
> From: Olaf Dabrunz <od@suse.de>
>
> The existing bootirq quirks and the reroute workaround may work for other chips
> where we could not test them. This parameter allows users to apply these to
> other chips without the need to re-build the kernel.
>
> This patch was conceived simultaneously by Stefan Assmann, Daniel Gollub and
> Olaf Dabrunz. The implementation is the author's.
>
> bootirqquirk=0x<vendor>,0x<device>,<quirk_type>
>
> - quirk type 1 - 32 selects an IRQ reroute algorithm for devices
> connected to that PCI bridge (currently only algorithm "1" is
> implemented),
>
> - quirk type 33 - x applies one of the known quirks to the PCI
> device, currently these:
>
> 33 -> quirk_disable_intel_boot_interrupt
> 34 -> quirk_disable_broadcom_boot_interrupt
> 35 -> quirk_disable_amd_8111_boot_interrupt
> 36 -> quirk_disable_amd_813x_boot_interrupt
> 37 -> quirk_disable_amd_sb700s_boot_interrupt
Oh no. This can be used as an debug aid when the need arises, but we
dont want to add this to the kernel.
Thanks,
tglx
> Signed-off-by: Olaf Dabrunz <od@suse.de>
> Signed-off-by: Stefan Assmann <sassmann@suse.de>
> ---
> drivers/pci/quirks.c | 118 ++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 118 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 090ce38..bb7fa65 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -1576,6 +1576,113 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_re
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
> +
> +/*
> + * For additional boot irq quirks save boot time settings or call the quirks
> + * directly.
> + */
> +
> +#define MAX_BOOTTIME_CONFIG_PCI_FIXUPS_EARLY 32
> +struct pci_fixup __start_bc_pci_fixups_early[MAX_BOOTTIME_CONFIG_PCI_FIXUPS_EARLY];
> +struct pci_fixup *__end_bc_pci_fixups_early = __start_bc_pci_fixups_early +
> + MAX_BOOTTIME_CONFIG_PCI_FIXUPS_EARLY;
> +
> +static void (*bootirq_quirk_func[])(struct pci_dev *dev) = {
> + &quirk_disable_intel_boot_interrupt,
> + &quirk_disable_broadcom_boot_interrupt,
> + &quirk_disable_amd_8111_boot_interrupt,
> + &quirk_disable_amd_813x_boot_interrupt,
> + &quirk_disable_amd_sb700s_boot_interrupt,
> +};
> +
> +int __init bootirqquirk_setup(char *str)
> +{
> + int ints[4];
> + struct quirk_bootirq_reroute_dev tmp;
> + int i;
> +
> + str = get_options(str, ARRAY_SIZE(ints), ints);
> + if (!str)
> + return 0;
> +
> + if (nobootirqquirk)
> + return 1;
> +
> + /* all parameters are required */
> + if (ints[0] != 3)
> + return 0;
> +
> + /* save settings */
> + tmp.vendor = ints[1];
> + tmp.device = ints[2];
> + tmp.quirk_variant = ints[3];
> +
> + /*
> + * quirk variants > MAX_QUIRK_BOOTIRQ_REROUTE_VARIANTS select quirk
> + * functions
> + */
> + if (tmp.quirk_variant > MAX_QUIRK_BOOTIRQ_REROUTE_VARIANTS) {
> + for (i = 0; i < MAX_BOOTTIME_CONFIG_PCI_FIXUPS_EARLY; i++) {
> + if (__start_bc_pci_fixups_early[i].vendor == 0)
> + break;
> +
> + if (__start_bc_pci_fixups_early[i].vendor == tmp.vendor &&
> + __start_bc_pci_fixups_early[i].device == tmp.device)
> + return 1; /* already in array */
> + }
> +
> + if (i >= MAX_BOOTTIME_CONFIG_PCI_FIXUPS_EARLY) {
> + printk(KERN_INFO "PCI quirk: too many boottime "
> + "configurable early quirk entries when "
> + "trying to add 0x%04x:0x%04x\n",
> + tmp.vendor, tmp.device);
> + return 0;
> + }
> +
> + if (tmp.quirk_variant > ARRAY_SIZE(bootirq_quirk_func) +
> + MAX_QUIRK_BOOTIRQ_REROUTE_VARIANTS) {
> + printk(KERN_INFO "PCI quirk: no such quirk function: "
> + "%d\n", tmp.quirk_variant);
> + return 0;
> + }
> +
> + __start_bc_pci_fixups_early[i].vendor = tmp.vendor;
> + __start_bc_pci_fixups_early[i].device = tmp.device;
> + __start_bc_pci_fixups_early[i].hook =
> + bootirq_quirk_func[tmp.quirk_variant -
> + (MAX_QUIRK_BOOTIRQ_REROUTE_VARIANTS + 1)];
> + } else {
> + for (i = 0; i < MAX_QUIRK_BOOTIRQ_REROUTE_DEVS; i++) {
> + if (quirk_bootirq_reroute_devs[i].vendor == 0)
> + break;
> +
> + if (quirk_bootirq_reroute_devs[i].vendor == tmp.vendor &&
> + quirk_bootirq_reroute_devs[i].device == tmp.device)
> + return 1; /* already in array */
> + }
> +
> + if (i >= MAX_QUIRK_BOOTIRQ_REROUTE_DEVS) {
> + printk(KERN_INFO "PCI quirk: too many reroute entries when "
> + "trying to add 0x%04x:0x%04x\n",
> + tmp.vendor, tmp.device);
> + return 0;
> + }
> +
> + quirk_bootirq_reroute_devs[i].vendor = tmp.vendor;
> + quirk_bootirq_reroute_devs[i].device = tmp.device;
> + quirk_bootirq_reroute_devs[i].quirk_variant = tmp.quirk_variant;
> +
> + reroute_to_boot_interrupts = 1;
> + }
> +
> + printk(KERN_INFO "PCI quirk: reroute interrupts for 0x%04x:0x%04x\n",
> + tmp.vendor, tmp.device);
> + return 1;
> +}
> +
> +/* bootirqquirk=0x<vendor>,0x<device>,<quirk_type> */
> +__setup("bootirqquirk=", bootirqquirk_setup);
> +
> #endif /* CONFIG_X86_IO_APIC */
>
> /*
> @@ -1773,6 +1880,17 @@ void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
> return;
> }
> pci_do_fixups(dev, start, end);
> +
> + switch(pass) {
> + case pci_fixup_early:
> + start = __start_bc_pci_fixups_early;
> + end = __end_bc_pci_fixups_early;
> + break;
> +
> + default:
> + return;
> + }
> + pci_do_fixups(dev, start, end);
> }
> EXPORT_SYMBOL(pci_fixup_device);
>
> --
> 1.5.2.4
>
> --
> Olaf Dabrunz (od/odabrunz), SUSE Linux Products GmbH, N??rnberg
>
next prev parent reply other threads:[~2008-06-03 10:56 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-02 12:45 [PATCH 0/7] Boot IRQ quirks and rerouting Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 1/7] add kernel cmdline option to disable pci-irq quirks Olaf Dabrunz
2008-06-03 10:13 ` Thomas Gleixner
2008-06-03 17:00 ` Stefan Assmann
2008-06-02 12:45 ` [PATCH 2/7] reroute PCI interrupt to legacy boot interrupt equivalent Olaf Dabrunz
2008-06-03 10:37 ` Thomas Gleixner
2008-06-03 22:59 ` Randy Dunlap
2008-06-12 14:14 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 3/7] disable legacy boot interrupt generation Olaf Dabrunz
2008-06-03 10:40 ` Thomas Gleixner
2008-06-02 12:45 ` [PATCH 4/7] disable broadcomm " Olaf Dabrunz
2008-06-03 10:46 ` Thomas Gleixner
2008-06-03 15:46 ` Jon Masters
2008-06-03 15:59 ` Olaf Dabrunz
2008-06-03 16:05 ` Jon Masters
2008-06-03 17:27 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 5/7] disable AMD/ATI " Olaf Dabrunz
2008-06-03 10:54 ` Thomas Gleixner
2008-06-12 14:14 ` Olaf Dabrunz
2008-06-02 12:45 ` [PATCH 6/7] disable pci legacy boot irq quirks on noapic boot Olaf Dabrunz
2008-06-03 10:55 ` Thomas Gleixner
2008-06-02 12:45 ` [PATCH 7/7] bootirqquirk= parameter to enable bootirq quirks for additional chips Olaf Dabrunz
2008-06-03 10:56 ` Thomas Gleixner [this message]
2008-06-04 10:06 ` Olaf Dabrunz
2008-06-02 16:43 ` [PATCH 0/7] Boot IRQ quirks and rerouting Olaf Dabrunz
2008-06-03 10:11 ` Thomas Gleixner
2008-06-03 17:08 ` Olaf Dabrunz
2008-06-03 10:21 ` Olaf Dabrunz
2008-06-03 15:52 ` Jon Masters
2008-06-03 16:17 ` Stefan Assmann
2008-06-03 16:56 ` Olaf Dabrunz
2008-06-04 2:35 ` Eric W. Biederman
2008-06-04 9:49 ` Stefan Assmann
2008-06-04 10:45 ` Eric W. Biederman
2008-06-04 11:33 ` Stefan Assmann
2008-06-04 15:52 ` Maciej W. Rozycki
2008-06-04 16:08 ` Thomas Gleixner
2008-06-04 17:18 ` Maciej W. Rozycki
2008-06-04 17:33 ` Thomas Gleixner
2008-06-04 17:53 ` Maciej W. Rozycki
2008-06-04 18:35 ` Thomas Gleixner
2008-06-04 18:51 ` Maciej W. Rozycki
2010-02-16 0:30 ` Yuhong Bao
2008-06-04 18:57 ` Jon Masters
2008-06-04 19:19 ` Maciej W. Rozycki
2008-06-04 19:59 ` Jon Masters
2008-06-04 22:07 ` Maciej W. Rozycki
2008-06-04 22:27 ` Jon Masters
2008-06-04 23:08 ` Maciej W. Rozycki
2008-06-04 11:37 ` Olaf Dabrunz
2008-06-04 18:44 ` Jon Masters
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.1.10.0806031255230.3235@apollo.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=hpa@zytor.com \
--cc=jonathan@jonmasters.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=od@suse.de \
--cc=sassmann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®