mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jeff Layton <jlayton@redhat.com>
To: "Daniel J Blueman" <daniel.blueman@gmail.com>
Cc: chucklever@gmail.com, linux-nfs@vger.kernel.org,
	nfsv4@linux-nfs.org,
	"Linux Kernel" <linux-kernel@vger.kernel.org>,
	"J. Bruce Fields" <bfields@fieldses.org>,
	"Trond Myklebust" <trond.myklebust@fys.uio.no>
Subject: Re: [2.6.26-rc4] mount.nfsv4/memory poisoning issues...
Date: Thu, 19 Jun 2008 08:14:20 -0400	[thread overview]
Message-ID: <20080619081420.24645bc4@tleilax.poochiereds.net> (raw)
In-Reply-To: <6278d2220806151110x68ee91fej8cf8e6b591ce1319@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 3351 bytes --]

On Sun, 15 Jun 2008 19:10:27 +0100
"Daniel J Blueman" <daniel.blueman@gmail.com> wrote:

> On Thu, Jun 5, 2008 at 12:43 AM, Chuck Lever <chuck.lever@oracle.com> wrote:
> > Hi Daniel-
> >
> > On Wed, Jun 4, 2008 at 7:33 PM, Daniel J Blueman
> > <daniel.blueman@gmail.com> wrote:
> >> Having experienced 'mount.nfs4: internal error' when mounting nfsv4 in
> >> the past, I have a minimal test-case I sometimes run:
> >>
> >> $ while :; do mount -t nfs4 filer:/store /store; umount /store; done
> >>
> >> After ~100 iterations, I saw the 'mount.nfs4: internal error',
> >> followed by symptoms of memory corruption [1], a locking issue with
> >> the reporting [2] and another (related?) memory-corruption issue
> >> (off-by-1?) [3]. A little analysis shows memory being overwritten by
> >> (likely) a poison value, which gets complicated if it's not
> >> use-after-free...
> >>
> >> Anyone dare confirm this issue? NFSv4 server is x86-64 Ubuntu 8.04
> >> 2.6.24-18, client U8.04 2.6.26-rc4; batteries included [4].
> >
> > We have some other reports of late model kernels with memory
> > corruption issues during NFS mount.  The problem is that by the time
> > these canaries start singing, the evidence of what did the corrupting
> > is long gone.
> >
> >> I'm happy to decode addresses, test patches etc.
> >
> > If these crashes are more or less reliably reproduced, it would be
> > helpful if you could do a 'git bisect' on the client to figure out at
> > what point in the kernel revision history this problem was introduced.
> >
> > Have you seen the problem on client kernels earlier than 2.6.25?
> 
> Firstly, I had omitted that I'd booted the kernel with
> debug_objects=1, which provides the canary here.
> 
> The primary failure I see is 'mount.nfs4: internal error', and always
> after 358 umount/mount cycles (plus 1 initial mount) which gives us a
> clue; 'netstat' shows all these connections in a TIME_WAIT state, thus
> the bug relates to the inability to allocate a socket error path. I
> found that after the connection lifetime expired, you can mount again,
> which corroborates this theory.
> 
> In this case, we saw the mount() syscall result in the mount.nfsv4
> process being SEGV'd when booted with 'debug_object=1', without this
> option, we see:
> 
> # strace /sbin/mount.nfs4 x1:/ /store
> ...
> mount("x1:/", "/store", "nfs4", 0,
> "addr=192.168.0.250,clientaddr=19"...) = -1 EIO (Input/output error)
> 
> So, it's impossible to tell when the corruption was introduced, as it
> has only become detectable recently.
> 
> It's worth a look-over of the socket-allocation error path, if someone
> can check, and reproduces 100% with the 'debug_object=1' param,
> available since 2.6.26-rc1 and 359 mounts in quick succession.
> 

For some strange reason (probably something I'm doing wrong or maybe
something environmental), I've not been able to reproduce this panic on
a stock kernel. I did, however, apply the following fault injection
patch and was able to reproduce it on the second mount attempt. The 3
patch set that I posted last week definitely prevents the oops. If
you're able to confirm that it also fixes your panic it would be a
helpful data point.

The fault injection patch I'm using is attached. It just simulates
nfs4_init_client() consistently returning an error.

Cheers,
-- 
Jeff Layton <jlayton@redhat.com>

[-- Attachment #2: nfs4-mount-fault-injection.patch --]
[-- Type: text/x-patch, Size: 401 bytes --]

diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index f2a092c..5ff4e46 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1028,8 +1028,11 @@ static int nfs4_set_client(struct nfs_server *server,
 		error = PTR_ERR(clp);
 		goto error;
 	}
+	error = -ENOMEM;
+/*
 	error = nfs4_init_client(clp, timeparms, ip_addr, authflavour);
 	if (error < 0)
+*/
 		goto error_put;
 
 	server->nfs_client = clp;

  parent reply	other threads:[~2008-06-19 12:14 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-04 23:33 Daniel J Blueman
2008-06-04 23:43 ` Chuck Lever
2008-06-15 18:10   ` Daniel J Blueman
2008-06-16 16:17     ` Chuck Lever
2008-06-19 12:14     ` Jeff Layton [this message]
2008-06-19 12:37       ` Daniel J Blueman
2008-06-19 17:32         ` Chuck Lever
2008-06-05  0:35 ` Jeff Layton
2008-06-05  8:28   ` Daniel J Blueman
2008-06-05 10:32     ` Jeff Layton
2008-06-10 18:54   ` Trond Myklebust
2008-06-10 19:13     ` Jeff Layton
2008-06-10 19:18       ` Jeff Layton
2008-06-10 20:27         ` Daniel J Blueman
2008-06-18 12:07           ` Jeff Layton
2008-06-21 17:52             ` Daniel J Blueman
2008-06-10 19:58       ` Trond Myklebust
2008-06-10 20:13         ` Jeff Layton
2008-06-10 20:33           ` Trond Myklebust
2008-06-10 20:41             ` Jeff Layton
2008-06-10 21:01             ` Jeff Layton
2008-06-10 21:37               ` Trond Myklebust
2008-06-10 22:04                 ` Jeff Layton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080619081420.24645bc4@tleilax.poochiereds.net \
    --to=jlayton@redhat.com \
    --cc=bfields@fieldses.org \
    --cc=chucklever@gmail.com \
    --cc=daniel.blueman@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nfs@vger.kernel.org \
    --cc=nfsv4@linux-nfs.org \
    --cc=trond.myklebust@fys.uio.no \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome