From: "J.A. Magallón" <jamagallon@ono.com>
To: Linux-Kernel <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.6.27-git3: rtl8169 oops and wireless missing symbols
Date: Tue, 14 Oct 2008 02:30:03 +0200 [thread overview]
Message-ID: <20081014023003.07b6d745@werewolf.home> (raw)
In-Reply-To: <20081014012429.3f2924e3@werewolf.home>
On Tue, 14 Oct 2008 01:24:29 +0200, "J.A. Magallón" <jamagallon@ono.com> wrote:
> On Mon, 13 Oct 2008 16:12:28 -0700 (PDT), David Miller <davem@davemloft.net> wrote:
>
> > From: "J.A. Magallón" <jamagallon@ono.com>
> > Date: Tue, 14 Oct 2008 01:02:02 +0200
> >
> > > Booting .27-git3 on the Aspire One gave me a couple oopses.
> >
> > Fixed by:
> >
> > commit 738e1e694bf6d9e965ba0ce2667a1bec5780a172
> > Author: Petr Vandrovec <petr@vandrovec.name>
> > Date: Sun Oct 12 20:58:29 2008 -0700
> >
> > r8169: NULL pointer dereference on r8169 load
> >
> > mmio_addr in r8169 needs to be initialized before use
> >
> > Maybe that all tp-> initialization should be moved before rtl_init_mac_address call,
> > but this is enough to get rid of crash in rtl_rar_set due to mmio_addr being uninitialized.
> >
> > Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
> > Signed-off-by: David S. Miller <davem@davemloft.net>
> >
> > diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
> > index bdae2c5..c821da2 100644
> > --- a/drivers/net/r8169.c
> > +++ b/drivers/net/r8169.c
> > @@ -2154,6 +2154,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> >
> > spin_lock_init(&tp->lock);
> >
> > + tp->mmio_addr = ioaddr;
> > +
> > rtl_init_mac_address(tp, ioaddr);
> >
> > /* Get MAC address */
> > @@ -2186,7 +2188,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> > #endif
> >
> > tp->intr_mask = 0xffff;
> > - tp->mmio_addr = ioaddr;
> > tp->align = cfg->align;
> > tp->hw_start = cfg->hw_start;
> > tp->intr_event = cfg->intr_event;
> >
>
> Thanks, this cured the rtl8169 part.
Mmm, spoke too fast. It loads, but:
Oct 14 02:27:45 one kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Oct 14 02:27:45 one kernel: r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 14 02:27:45 one kernel: r8169 0000:02:00.0: setting latency timer to 64
Oct 14 02:27:45 one kernel: eth0: RTL8102e at 0xdfffe000, 00:00:00:00:00:00, XID 24a00000 IRQ 219
Oct 14 02:27:45 one ifplugd(eth0)[5087]: ifplugd 0.28 initializing.
Oct 14 02:27:45 one ifplugd(eth0)[5087]: Using interface eth0/00:00:00:00:00:00 with driver <r8169> (version: 2.3LK-NAPI)
Oct 14 02:27:45 one ifplugd(eth0)[5087]: Using detection mode: SIOCETHTOOL
Oct 14 02:27:45 one ifplugd(eth0)[5087]: Initialization complete, link beat detected.
Oct 14 02:27:45 one ifplugd(eth0)[5087]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Oct 14 02:27:46 one ifplugd(eth0)[5087]: client: Determining IP information for eth0...SIOCSIFFLAGS: Cannot assign requested address
Oct 14 02:27:46 one ifplugd(eth0)[5087]: client: SIOCSIFFLAGS: Cannot assign requested address
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2009.0 (Cooker) for i586
Linux 2.6.25-jam18 (gcc 4.3.1 20080626 (GCC) #1 SMP
next prev parent reply other threads:[~2008-10-14 0:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-13 23:02 J.A. Magallón
2008-10-13 23:12 ` David Miller
2008-10-13 23:24 ` J.A. Magallón
2008-10-14 0:30 ` J.A. Magallón [this message]
2008-10-14 19:33 ` Francois Romieu
2008-10-14 20:03 ` J.A. Magallón
2008-10-14 23:39 ` Stefan Lippers-Hollmann
2008-10-13 23:24 ` John W. Linville
2008-10-13 23:44 ` J.A. Magallón
2008-10-14 16:59 ` John W. Linville
2008-10-14 0:23 ` Luis R. Rodriguez
2008-10-14 1:13 ` J.A. Magallón
2008-10-17 20:41 ` Stefanik Gábor
2008-10-17 21:24 ` Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081014023003.07b6d745@werewolf.home \
--to=jamagallon@ono.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®