From: Stefan Lippers-Hollmann <s.L-H@gmx.de>
To: Francois Romieu <romieu@fr.zoreil.com>
Cc: "J.A. Magallón" <jamagallon@ono.com>
Subject: Re: Linux 2.6.27-git3: rtl8169 oops and wireless missing symbols
Date: Wed, 15 Oct 2008 01:39:28 +0200 [thread overview]
Message-ID: <200810150139.28935.s.L-H@gmx.de> (raw)
In-Reply-To: <20081014193316.GA8223@electric-eye.fr.zoreil.com>
[-- Attachment #1: Type: text/plain, Size: 4441 bytes --]
Hi
On Dienstag, 14. Oktober 2008, Francois Romieu wrote:
> J.A. Magallón <jamagallon@ono.com> :
> [...]
> > Oct 14 02:27:45 one kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> > Oct 14 02:27:45 one kernel: r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> > Oct 14 02:27:45 one kernel: r8169 0000:02:00.0: setting latency timer to 64
> > Oct 14 02:27:45 one kernel: eth0: RTL8102e at 0xdfffe000, 00:00:00:00:00:00, XID 24a00000 IRQ 219
>
> The MAC address does not look sane. Does the revert below cure it ?
I can confirm this behaviour on 2.6.27 + all r8169 related updates cherry
picked from linux-2.6 git[1]:
This is the relevant diff between the non-working[2] (all current updates
applied on top of 2.6.27) and the working[3] variant including your revert
below. With that revert, everything seems to work well again.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:03:00.0: setting latency timer to 64
-eth0: RTL8168c/8111c at 0xffffc20000c44000, 00:00:00:00:00:00, XID 3c4000c0 IRQ 1274
+eth0: RTL8168c/8111c at 0xffffc20000c42000, 00:1f:d0:88:4b:2f, XID 3c4000c0 IRQ 1274
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:04:00.0: setting latency timer to 64
-eth1: RTL8168c/8111c at 0xffffc20000c46000, 00:00:00:00:00:00, XID 3c4000c0 IRQ 1273
+eth1: RTL8168c/8111c at 0xffffc20000c44000, 00:1f:d0:80:86:25, XID 3c4000c0 IRQ 1273
lspci output taken from the working variant:
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology Device e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 1274
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at e8010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e8000000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at e8020000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology Device e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 1273
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at e8110000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e8100000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at e8120000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
> diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
> index c821da2..5b8f8ba 100644
> --- a/drivers/net/r8169.c
> +++ b/drivers/net/r8169.c
> @@ -1911,74 +1911,6 @@ static void rtl_disable_msi(struct pci_dev *pdev, struct rtl8169_private *tp)
> }
> }
>
> -static int rtl_eeprom_read(struct pci_dev *pdev, int cap, int addr, __le32 *val)
[...]
> -}
> -
> -static void rtl_init_mac_address(struct rtl8169_private *tp,
> - void __iomem *ioaddr)
> -{
[...]
> -}
> -
> static int __devinit
> rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> {
> @@ -2156,8 +2088,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> tp->mmio_addr = ioaddr;
>
> - rtl_init_mac_address(tp, ioaddr);
> -
> /* Get MAC address */
> for (i = 0; i < MAC_ADDR_LEN; i++)
> dev->dev_addr[i] = RTL_R8(MAC0 + i);
Regards
Stefan Lippers-Hollmann
[1] http://sidux.com/slh/r8169/patches/ (cherry picked r8169 from
linux-2.6 HEAD)
[2] http://sidux.com/slh/r8169/dmesg.not-working.log
[3] http://sidux.com/slh/r8169/dmesg.working.log
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next prev parent reply other threads:[~2008-10-14 23:39 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-13 23:02 J.A. Magallón
2008-10-13 23:12 ` David Miller
2008-10-13 23:24 ` J.A. Magallón
2008-10-14 0:30 ` J.A. Magallón
2008-10-14 19:33 ` Francois Romieu
2008-10-14 20:03 ` J.A. Magallón
2008-10-14 23:39 ` Stefan Lippers-Hollmann [this message]
2008-10-13 23:24 ` John W. Linville
2008-10-13 23:44 ` J.A. Magallón
2008-10-14 16:59 ` John W. Linville
2008-10-14 0:23 ` Luis R. Rodriguez
2008-10-14 1:13 ` J.A. Magallón
2008-10-17 20:41 ` Stefanik Gábor
2008-10-17 21:24 ` Luis R. Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200810150139.28935.s.L-H@gmx.de \
--to=s.l-h@gmx.de \
--cc=jamagallon@ono.com \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®