* [PATCH 5/5] w35und: remove the no-op pa_stall_execution macro
@ 2008-10-22 16:07 Pekka J Enberg
2008-10-23 9:49 ` Pavel Machek
0 siblings, 1 reply; 2+ messages in thread
From: Pekka J Enberg @ 2008-10-22 16:07 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Pavel Machek, linux-kernel
From: Pekka Enberg <penberg@cs.helsinki.fi>
The pa_stall_execution() macro doesn't do anything so remove it from driver
code.
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
drivers/staging/winbond/phy_calibration.c | 23 -----------------------
drivers/staging/winbond/wbhal_f.h | 1 -
2 files changed, 0 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index 76183b2..e83c2f2 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -431,7 +431,6 @@ void _rxadc_dc_offset_cancellation_winbond(hw_data_t *phw_data, u32 frequency)
val |= MASK_ADC_DC_CAL_STR;
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
- pa_stall_execution(US); // *MUST* wait for a while
// e. The result are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]"
#ifdef _DEBUG
@@ -522,7 +521,6 @@ void _txidac_dc_offset_cancellation_winbond(hw_data_t *phw_data)
reg_mode_ctrl |= (MASK_CALIB_START|2|(2<<2));
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US);
hw_get_dxx_reg(phw_data, 0x5C, ®_dc_cancel);
PHY_DEBUG(("[CAL] DC_CANCEL (read) = 0x%08X\n", reg_dc_cancel));
@@ -536,7 +534,6 @@ void _txidac_dc_offset_cancellation_winbond(hw_data_t *phw_data)
reg_dc_cancel &= ~(0x03FF);
PHY_DEBUG(("[CAL] DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
- pa_stall_execution(US);
hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val));
@@ -552,7 +549,6 @@ void _txidac_dc_offset_cancellation_winbond(hw_data_t *phw_data)
reg_dc_cancel |= (1 << CANCEL_DC_I_SHIFT);
PHY_DEBUG(("[CAL] DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
- pa_stall_execution(US);
hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val));
@@ -600,7 +596,6 @@ void _txidac_dc_offset_cancellation_winbond(hw_data_t *phw_data)
reg_mode_ctrl &= ~MASK_CALIB_START;
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US);
}
///////////////////////////////////////////////////////
@@ -651,7 +646,6 @@ void _txqdac_dc_offset_cacellation_winbond(hw_data_t *phw_data)
reg_mode_ctrl |= (MASK_CALIB_START|3);
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US);
hw_get_dxx_reg(phw_data, 0x5C, ®_dc_cancel);
PHY_DEBUG(("[CAL] DC_CANCEL (read) = 0x%08X\n", reg_dc_cancel));
@@ -665,11 +659,9 @@ void _txqdac_dc_offset_cacellation_winbond(hw_data_t *phw_data)
reg_dc_cancel &= ~(0x001F);
PHY_DEBUG(("[CAL] DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
- pa_stall_execution(US);
hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val));
- pa_stall_execution(US);
iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
@@ -682,11 +674,9 @@ void _txqdac_dc_offset_cacellation_winbond(hw_data_t *phw_data)
reg_dc_cancel |= (1 << CANCEL_DC_Q_SHIFT);
PHY_DEBUG(("[CAL] DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
- pa_stall_execution(US);
hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val));
- pa_stall_execution(US);
iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
@@ -732,7 +722,6 @@ void _txqdac_dc_offset_cacellation_winbond(hw_data_t *phw_data)
reg_mode_ctrl &= ~MASK_CALIB_START;
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US);
}
//20060612.1.a 20060718.1 Modify
@@ -792,12 +781,10 @@ u8 _tx_iq_calibration_loop_winbond(hw_data_t *phw_data,
reg_mode_ctrl |= (MASK_CALIB_START|0x02|2<<2);
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US);
// b.
hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val));
- pa_stall_execution(US);
iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13);
@@ -813,7 +800,6 @@ u8 _tx_iq_calibration_loop_winbond(hw_data_t *phw_data,
reg_mode_ctrl &= ~MASK_CALIB_START;
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US);
// d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to
// enable "IQ alibration Mode II"
@@ -823,12 +809,10 @@ u8 _tx_iq_calibration_loop_winbond(hw_data_t *phw_data,
reg_mode_ctrl |= (MASK_CALIB_START|0x03);
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US);
// e.
hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val));
- pa_stall_execution(US);
iqcal_tone_i = _s13_to_s32(val & 0x00001FFF);
iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13);
@@ -1282,13 +1266,11 @@ u8 _rx_iq_calibration_loop_winbond(hw_data_t *phw_data, u16 factor, u32 frequenc
if( !hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl) )//20060718.1 modify
return 0;
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US);
reg_mode_ctrl &= ~MASK_IQCAL_MODE;
reg_mode_ctrl |= (MASK_CALIB_START|0x1);
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- pa_stall_execution(US); //Should be read out after 450us
// c.
hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
@@ -1697,7 +1679,6 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
phy_set_rf_data(phw_data, 5, ((5<<24)|current_txvga) );
phw_data->txvga_setting_for_cal = current_txvga;
- //pa_stall_execution(30000);//Sleep(30);
msleep(30); // 20060612.1.a
if( !hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl) ) // 20060718.1 modify
@@ -1714,18 +1695,14 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
- //pa_stall_execution(US);
udelay(1); // 20060612.1.a
- //pa_stall_execution(300);//Sleep(30);
udelay(300); // 20060612.1.a
// b.
hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val));
- //pa_stall_execution(US);
- //pa_stall_execution(300);//Sleep(30);
udelay(300); // 20060612.1.a
iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h
index 9f0436b..239c301 100644
--- a/drivers/staging/winbond/wbhal_f.h
+++ b/drivers/staging/winbond/wbhal_f.h
@@ -111,7 +111,6 @@ unsigned char hal_set_LED( phw_data_t pHwData, u32 Mode ); // 20061108 for WPS
#define hal_ibss_disconnect(_A) hal_stop_sync_bss(_A)
#define hal_join_request_stop(_A)
unsigned char hal_idle( phw_data_t pHwData );
-#define pa_stall_execution( _A ) //OS_SLEEP( 1 )
#define hw_get_cxx_reg( _A, _B, _C )
#define hw_set_cxx_reg( _A, _B, _C )
#define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (u32 *)_C )
--
1.5.3.7
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH 5/5] w35und: remove the no-op pa_stall_execution macro
2008-10-22 16:07 [PATCH 5/5] w35und: remove the no-op pa_stall_execution macro Pekka J Enberg
@ 2008-10-23 9:49 ` Pavel Machek
0 siblings, 0 replies; 2+ messages in thread
From: Pavel Machek @ 2008-10-23 9:49 UTC (permalink / raw)
To: Pekka J Enberg; +Cc: Greg Kroah-Hartman, linux-kernel
On Wed 2008-10-22 19:07:26, Pekka J Enberg wrote:
> From: Pekka Enberg <penberg@cs.helsinki.fi>
>
> The pa_stall_execution() macro doesn't do anything so remove it from driver
> code.
>
> Cc: Pavel Machek <pavel@suse.cz>
> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
ACK, and thanks for the series!
Pavel
> ---
> drivers/staging/winbond/phy_calibration.c | 23 -----------------------
> drivers/staging/winbond/wbhal_f.h | 1 -
> 2 files changed, 0 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
> index 76183b2..e83c2f2 100644
> --- a/drivers/staging/winbond/phy_calibration.c
> +++ b/drivers/staging/winbond/phy_calibration.c
> @@ -431,7 +431,6 @@ void _rxadc_dc_offset_cancellation_winbond(hw_data_t *phw_data, u32 frequency)
>
> val |= MASK_ADC_DC_CAL_STR;
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
> - pa_stall_execution(US); // *MUST* wait for a while
>
> // e. The result are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]"
> #ifdef _DEBUG
> @@ -522,7 +521,6 @@ void _txidac_dc_offset_cancellation_winbond(hw_data_t *phw_data)
> reg_mode_ctrl |= (MASK_CALIB_START|2|(2<<2));
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US);
>
> hw_get_dxx_reg(phw_data, 0x5C, ®_dc_cancel);
> PHY_DEBUG(("[CAL] DC_CANCEL (read) = 0x%08X\n", reg_dc_cancel));
> @@ -536,7 +534,6 @@ void _txidac_dc_offset_cancellation_winbond(hw_data_t *phw_data)
> reg_dc_cancel &= ~(0x03FF);
> PHY_DEBUG(("[CAL] DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
> hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
> - pa_stall_execution(US);
>
> hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
> PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val));
> @@ -552,7 +549,6 @@ void _txidac_dc_offset_cancellation_winbond(hw_data_t *phw_data)
> reg_dc_cancel |= (1 << CANCEL_DC_I_SHIFT);
> PHY_DEBUG(("[CAL] DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
> hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
> - pa_stall_execution(US);
>
> hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
> PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val));
> @@ -600,7 +596,6 @@ void _txidac_dc_offset_cancellation_winbond(hw_data_t *phw_data)
> reg_mode_ctrl &= ~MASK_CALIB_START;
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US);
> }
>
> ///////////////////////////////////////////////////////
> @@ -651,7 +646,6 @@ void _txqdac_dc_offset_cacellation_winbond(hw_data_t *phw_data)
> reg_mode_ctrl |= (MASK_CALIB_START|3);
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US);
>
> hw_get_dxx_reg(phw_data, 0x5C, ®_dc_cancel);
> PHY_DEBUG(("[CAL] DC_CANCEL (read) = 0x%08X\n", reg_dc_cancel));
> @@ -665,11 +659,9 @@ void _txqdac_dc_offset_cacellation_winbond(hw_data_t *phw_data)
> reg_dc_cancel &= ~(0x001F);
> PHY_DEBUG(("[CAL] DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
> hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
> - pa_stall_execution(US);
>
> hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
> PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val));
> - pa_stall_execution(US);
>
> iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
> iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
> @@ -682,11 +674,9 @@ void _txqdac_dc_offset_cacellation_winbond(hw_data_t *phw_data)
> reg_dc_cancel |= (1 << CANCEL_DC_Q_SHIFT);
> PHY_DEBUG(("[CAL] DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
> hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
> - pa_stall_execution(US);
>
> hw_get_dxx_reg(phw_data, REG_CALIB_READ2, &val);
> PHY_DEBUG(("[CAL] CALIB_READ2 = 0x%08X\n", val));
> - pa_stall_execution(US);
>
> iqcal_image_i = _s13_to_s32(val & 0x00001FFF);
> iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
> @@ -732,7 +722,6 @@ void _txqdac_dc_offset_cacellation_winbond(hw_data_t *phw_data)
> reg_mode_ctrl &= ~MASK_CALIB_START;
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US);
> }
>
> //20060612.1.a 20060718.1 Modify
> @@ -792,12 +781,10 @@ u8 _tx_iq_calibration_loop_winbond(hw_data_t *phw_data,
> reg_mode_ctrl |= (MASK_CALIB_START|0x02|2<<2);
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US);
>
> // b.
> hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
> PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val));
> - pa_stall_execution(US);
>
> iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
> iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13);
> @@ -813,7 +800,6 @@ u8 _tx_iq_calibration_loop_winbond(hw_data_t *phw_data,
> reg_mode_ctrl &= ~MASK_CALIB_START;
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US);
>
> // d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to
> // enable "IQ alibration Mode II"
> @@ -823,12 +809,10 @@ u8 _tx_iq_calibration_loop_winbond(hw_data_t *phw_data,
> reg_mode_ctrl |= (MASK_CALIB_START|0x03);
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US);
>
> // e.
> hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
> PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val));
> - pa_stall_execution(US);
>
> iqcal_tone_i = _s13_to_s32(val & 0x00001FFF);
> iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13);
> @@ -1282,13 +1266,11 @@ u8 _rx_iq_calibration_loop_winbond(hw_data_t *phw_data, u16 factor, u32 frequenc
> if( !hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl) )//20060718.1 modify
> return 0;
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US);
>
> reg_mode_ctrl &= ~MASK_IQCAL_MODE;
> reg_mode_ctrl |= (MASK_CALIB_START|0x1);
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
> - pa_stall_execution(US); //Should be read out after 450us
>
> // c.
> hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
> @@ -1697,7 +1679,6 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
> phy_set_rf_data(phw_data, 5, ((5<<24)|current_txvga) );
> phw_data->txvga_setting_for_cal = current_txvga;
>
> - //pa_stall_execution(30000);//Sleep(30);
> msleep(30); // 20060612.1.a
>
> if( !hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl) ) // 20060718.1 modify
> @@ -1714,18 +1695,14 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data)
> hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
> PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
>
> - //pa_stall_execution(US);
> udelay(1); // 20060612.1.a
>
> - //pa_stall_execution(300);//Sleep(30);
> udelay(300); // 20060612.1.a
>
> // b.
> hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
>
> PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val));
> - //pa_stall_execution(US);
> - //pa_stall_execution(300);//Sleep(30);
> udelay(300); // 20060612.1.a
>
> iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
> diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h
> index 9f0436b..239c301 100644
> --- a/drivers/staging/winbond/wbhal_f.h
> +++ b/drivers/staging/winbond/wbhal_f.h
> @@ -111,7 +111,6 @@ unsigned char hal_set_LED( phw_data_t pHwData, u32 Mode ); // 20061108 for WPS
> #define hal_ibss_disconnect(_A) hal_stop_sync_bss(_A)
> #define hal_join_request_stop(_A)
> unsigned char hal_idle( phw_data_t pHwData );
> -#define pa_stall_execution( _A ) //OS_SLEEP( 1 )
> #define hw_get_cxx_reg( _A, _B, _C )
> #define hw_set_cxx_reg( _A, _B, _C )
> #define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (u32 *)_C )
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-10-23 9:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-10-22 16:07 [PATCH 5/5] w35und: remove the no-op pa_stall_execution macro Pekka J Enberg
2008-10-23 9:49 ` Pavel Machek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®