From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: linux-kernel@vger.kernel.org, mingo@elte.hu, rjw@sisk.pl,
dipankar@in.ibm.com, tglx@linuxtronix.de, andi@firstfloor.org
Subject: Re: [PATCH] v3 rudimentary tracing for Classic RCU
Date: Tue, 28 Oct 2008 18:16:33 -0700 [thread overview]
Message-ID: <20081029011633.GA21940@linux.vnet.ibm.com> (raw)
In-Reply-To: <20081027235748.GA3647@linux.vnet.ibm.com>
On Mon, Oct 27, 2008 at 04:57:48PM -0700, Paul E. McKenney wrote:
> On Mon, Oct 27, 2008 at 02:50:29PM -0700, Paul E. McKenney wrote:
> > On Sun, Oct 26, 2008 at 02:59:30PM -0700, Paul E. McKenney wrote:
> > > On Thu, Oct 23, 2008 at 07:12:09PM +0800, Lai Jiangshan wrote:
> > > >
> > > > trivial ported it to seq_file.
> > > > seq_file are very good for the output buffer.
> > >
> > > Thank you for putting this together!!! Looks good at first glance --
> > > I will test it out.
> >
> > So it does seem to operate correctly. I combined it with my patch and
> > applied against 2.6.27 for ease of testing.
> >
> > One question -- why the multi-line format? This would be a bit
> > awkward on a 128-CPU system, let alone on a 4,096-CPU system.
> > Or am I missing some trick here?
>
> To clarify, by "missing some trick", I am wondering if there is some
> command that works in blocks of lines. After all, /proc/cpuinfo
> produces the same sort of output that your patch does. ;-)
Ported to 2.6.27 to ease testing, and fixed up the formatting a bit.
I remember quickly scanning through one-line-per-CPU data to find
problems with rcutree.c, but the expanded names are quite nice -- I
had to brutally abbreviate to fit each CPU on a single line.
And I agree that seqfile does work nicely for this.
I am strongly tempted to suggest CSV format output with headers to
allow the data to be pulled into gnumeric or oocalc -- this would
make handling large numbers of CPUs much easier. (Quickly donning
the asbestos suit with titanium pinstripes...)
Thanx, Paul
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
---
include/linux/rcuclassic.h | 4
kernel/Kconfig.preempt | 1
kernel/Makefile | 2
kernel/rcuclassic.c | 5 -
kernel/rcuclassic_trace.c | 198 +++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 207 insertions(+), 3 deletions(-)
diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h
index 4ab8436..735f35a 100644
--- a/include/linux/rcuclassic.h
+++ b/include/linux/rcuclassic.h
@@ -54,6 +54,9 @@ struct rcu_ctrlblk {
/* for current batch to proceed. */
} ____cacheline_internodealigned_in_smp;
+extern struct rcu_ctrlblk rcu_ctrlblk;
+extern struct rcu_ctrlblk rcu_bh_ctrlblk;
+
/* Is batch a before batch b ? */
static inline int rcu_batch_before(long a, long b)
{
@@ -76,6 +79,7 @@ struct rcu_data {
long quiescbatch; /* Batch # for grace period */
int passed_quiesc; /* User-mode/idle loop etc. */
int qs_pending; /* core waits for quiesc state */
+ bool beenonline; /* CPU online at least once */
/* 2) batch handling */
long batch; /* Batch # for current RCU batch */
diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt
index 9fdba03..ba32338 100644
--- a/kernel/Kconfig.preempt
+++ b/kernel/Kconfig.preempt
@@ -68,7 +68,6 @@ config PREEMPT_RCU
config RCU_TRACE
bool "Enable tracing for RCU - currently stats in debugfs"
- depends on PREEMPT_RCU
select DEBUG_FS
default y
help
diff --git a/kernel/Makefile b/kernel/Makefile
index 4e1d7df..e0bfce7 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -77,6 +77,8 @@ obj-$(CONFIG_CLASSIC_RCU) += rcuclassic.o
obj-$(CONFIG_PREEMPT_RCU) += rcupreempt.o
ifeq ($(CONFIG_PREEMPT_RCU),y)
obj-$(CONFIG_RCU_TRACE) += rcupreempt_trace.o
+else
+obj-$(CONFIG_RCU_TRACE) += rcuclassic_trace.o
endif
obj-$(CONFIG_RELAY) += relay.o
obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index aad93cd..06472fc 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -57,13 +57,13 @@ EXPORT_SYMBOL_GPL(rcu_lock_map);
/* Definition for rcupdate control block. */
-static struct rcu_ctrlblk rcu_ctrlblk = {
+struct rcu_ctrlblk rcu_ctrlblk = {
.cur = -300,
.completed = -300,
.lock = __SPIN_LOCK_UNLOCKED(&rcu_ctrlblk.lock),
.cpumask = CPU_MASK_NONE,
};
-static struct rcu_ctrlblk rcu_bh_ctrlblk = {
+struct rcu_ctrlblk rcu_bh_ctrlblk = {
.cur = -300,
.completed = -300,
.lock = __SPIN_LOCK_UNLOCKED(&rcu_bh_ctrlblk.lock),
@@ -564,6 +564,7 @@ static void rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
rdp->donetail = &rdp->donelist;
rdp->quiescbatch = rcp->completed;
rdp->qs_pending = 0;
+ rdp->beenonline = 1;
rdp->cpu = cpu;
rdp->blimit = blimit;
}
diff --git a/kernel/rcuclassic_trace.c b/kernel/rcuclassic_trace.c
new file mode 100644
index 0000000..b719048
--- /dev/null
+++ b/kernel/rcuclassic_trace.c
@@ -0,0 +1,198 @@
+/*
+ * Read-Copy Update tracing for classic implementation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2008
+ *
+ * Updated to use seqfile by Lai Jiangshan.
+ *
+ * Papers: http://www.rdrop.com/users/paulmck/RCU
+ *
+ * For detailed explanation of Read-Copy Update mechanism see -
+ * Documentation/RCU
+ *
+ */
+#include <linux/rcupdate.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+/* Print out rcu_data structures using seqfile facility. */
+
+static struct rcu_data *get_rcu_data_bh(int cpu)
+{
+ return &per_cpu(rcu_bh_data, cpu);
+}
+
+static struct rcu_data *get_rcu_data(int cpu)
+{
+ return &per_cpu(rcu_data, cpu);
+}
+
+static int show_rcu_data(struct seq_file *m, void *v)
+{
+ struct rcu_data *rdp = v;
+
+ if (!rdp->beenonline)
+ return 0;
+
+ seq_printf(m, "processor\t: %d", rdp->cpu);
+ if (cpu_is_offline(rdp->cpu))
+ seq_puts(m, "!\n");
+ else
+ seq_puts(m, "\n");
+ seq_printf(m, "quiescbatch\t: %ld\n", rdp->quiescbatch);
+ seq_printf(m, "batch\t\t: %ld\n", rdp->batch);
+ seq_printf(m, "passed_quiesc\t: %d\n", rdp->passed_quiesc);
+ seq_printf(m, "qs_pending\t: %d\n", rdp->qs_pending);
+ seq_printf(m, "qlen\t\t: %ld\n", rdp->qlen);
+ seq_printf(m, "blimit\t\t: %ld\n", rdp->blimit);
+ seq_puts(m, "\n");
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ typedef struct rcu_data *(*get_data_func)(int);
+
+ if (*pos == 0) /* just in case, cpu 0 is not the first */
+ *pos = first_cpu(cpu_possible_map);
+ else
+ *pos = next_cpu_nr(*pos - 1, cpu_possible_map);
+ if ((*pos) < nr_cpu_ids)
+ return ((get_data_func)m->private)(*pos);
+ return NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations rcu_data_seq_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_rcu_data,
+};
+
+static int rcu_data_open(struct inode *inode, struct file *file)
+{
+ int ret = seq_open(file, &rcu_data_seq_op);
+
+ if (ret)
+ return ret;
+ ((struct seq_file *)file->private_data)->private = inode->i_private;
+ return 0;
+}
+
+static const struct file_operations rcu_data_fops = {
+ .owner = THIS_MODULE,
+ .open = rcu_data_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+/* Print out rcu_ctrlblk structures using seqfile facility. */
+
+static void print_one_rcu_ctrlblk(struct seq_file *m, struct rcu_ctrlblk *rcp)
+{
+ seq_printf(m, "cur=%ld completed=%ld next_pending=%d s=%d\n\t",
+ rcp->cur, rcp->completed, rcp->next_pending, rcp->signaled);
+ seq_cpumask(m, &rcp->cpumask);
+ seq_puts(m, "\n");
+}
+
+static int show_rcucb(struct seq_file *m, void *unused)
+{
+ seq_puts(m, "rcu: ");
+ print_one_rcu_ctrlblk(m, &rcu_ctrlblk);
+ seq_puts(m, "rcu_bh: ");
+ print_one_rcu_ctrlblk(m, &rcu_bh_ctrlblk);
+ seq_puts(m, "online: ");
+ seq_cpumask(m, &cpu_online_map);
+ seq_puts(m, "\n");
+ return 0;
+}
+
+static int rcucb_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, show_rcucb, NULL);
+}
+
+static struct file_operations rcucb_fops = {
+ .owner = THIS_MODULE,
+ .open = rcucb_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *rcudir, *rcu_bh_data_file, *rcu_data_file, *rcucb_file;
+
+static int __init rcuclassic_trace_init(void)
+{
+ rcudir = debugfs_create_dir("rcu", NULL);
+ if (!rcudir)
+ goto out;
+
+ rcu_bh_data_file = debugfs_create_file("rcu_bh_data", 0444, rcudir,
+ get_rcu_data_bh, &rcu_data_fops);
+ if (!rcu_bh_data_file)
+ goto out_rcudir;
+
+ rcu_data_file = debugfs_create_file("rcu_data", 0444, rcudir,
+ get_rcu_data, &rcu_data_fops);
+ if (!rcu_data_file)
+ goto out_rcudata_bh_file;
+
+ rcucb_file = debugfs_create_file("rcucb", 0444, rcudir,
+ NULL, &rcucb_fops);
+ if (!rcucb_file)
+ goto out_rcudata_file;
+ return 0;
+
+out_rcudata_file:
+ debugfs_remove(rcu_data_file);
+out_rcudata_bh_file:
+ debugfs_remove(rcu_bh_data_file);
+out_rcudir:
+ debugfs_remove(rcudir);
+out:
+ return 1;
+}
+
+static void __exit rcuclassic_trace_cleanup(void)
+{
+ debugfs_remove(rcucb_file);
+ debugfs_remove(rcu_data_file);
+ debugfs_remove(rcu_bh_data_file);
+ debugfs_remove(rcudir);
+}
+
+module_init(rcuclassic_trace_init);
+module_exit(rcuclassic_trace_cleanup);
+
+MODULE_AUTHOR("Paul E. McKenney");
+MODULE_DESCRIPTION("Read-Copy Update tracing for classic implementation");
+MODULE_LICENSE("GPL");
+
next prev parent reply other threads:[~2008-10-29 1:16 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-06 14:12 scheduler hang on cpu re-hotplug with 2.6.27rc8 Andi Kleen
2008-10-06 23:28 ` RCU " Andi Kleen
2008-10-07 3:08 ` Paul E. McKenney
2008-10-07 7:15 ` Andi Kleen
2008-10-07 15:26 ` Paul E. McKenney
2008-10-07 15:49 ` Andi Kleen
2008-10-07 16:34 ` Paul E. McKenney
2008-10-07 21:09 ` Andi Kleen
2008-10-07 21:22 ` Paul E. McKenney
2008-10-09 1:08 ` [PATCH] rudimentary tracing for Classic RCU Paul E. McKenney
2008-10-09 6:20 ` Lai Jiangshan
2008-10-09 6:55 ` Andi Kleen
2008-10-09 7:05 ` Lai Jiangshan
2008-10-09 7:14 ` KOSAKI Motohiro
2008-10-09 7:26 ` Lai Jiangshan
2008-10-09 8:06 ` Andi Kleen
2008-10-10 11:48 ` Paul E. McKenney
2008-10-09 11:50 ` Paul E. McKenney
2008-10-09 11:50 ` Paul E. McKenney
2008-10-09 10:23 ` Frédéric Weisbecker
2008-10-09 10:53 ` Andi Kleen
2008-10-09 11:44 ` Frédéric Weisbecker
2008-10-09 11:54 ` Paul E. McKenney
2008-10-09 13:01 ` Frédéric Weisbecker
2008-10-10 3:44 ` [PATCH] v2 " Paul E. McKenney
2008-10-13 23:09 ` [PATCH] v3 " Paul E. McKenney
2008-10-14 3:53 ` Lai Jiangshan
2008-10-14 14:35 ` Paul E. McKenney
2008-10-23 11:12 ` Lai Jiangshan
2008-10-26 21:59 ` Paul E. McKenney
2008-10-27 21:50 ` Paul E. McKenney
2008-10-27 23:57 ` Paul E. McKenney
2008-10-29 1:16 ` Paul E. McKenney [this message]
2008-10-29 1:31 ` Lai Jiangshan
2008-10-30 15:52 ` Paul E. McKenney
2008-10-09 1:33 ` RCU hang on cpu re-hotplug with 2.6.27rc8 Paul E. McKenney
2008-10-09 4:56 ` Andi Kleen
2008-10-09 7:24 ` Thomas Gleixner
2008-10-09 8:22 ` Andi Kleen
2008-10-09 11:44 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081029011633.GA21940@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=andi@firstfloor.org \
--cc=dipankar@in.ibm.com \
--cc=laijs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=rjw@sisk.pl \
--cc=tglx@linuxtronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome