Re: todays git: WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x45e/0x750()

[Alan Cox <alan@lxorguk.ukuu.org.uk>]

On Fri, 9 Jan 2009 13:34:55 +0100
Christian Borntraeger <borntraeger@de.ibm.com> wrote:

> Hello,
> 
> with todays git I lots of these warnings:
> 
> [    1.246807] ata1.00: ATA-7: ST910021AS, 4.06, max UDMA/100
> [    1.253066] ata1.00: 195371568 sectors, multi 16: LBA48
> [    1.262561] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, 1.05, max UDMA/33
> [    1.273159] ata1.00: configured for UDMA/100
> [    1.275279] ata2.00: configured for UDMA/33
> [    1.285546] scsi 0:0:0:0: Direct-Access     ATA      ST910021AS       4.06 PQ: 0 ANSI: 5
> [    1.292049] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [    1.298427] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
> [    1.299631] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  1.05 PQ: 0 ANSI: 5
> [    1.311059] sd 0:0:0:0: [sda] Write Protect is off
> [    1.317409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    1.317426] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    1.318378] ------------[ cut here ]------------
> [    1.318380] WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x45e/0x750()
> [    1.318381] Hardware name: 64575GG

Can you see if this goes away if you back out all Arjan's async stuff.
Then if not can you back out my 32bit PIO patch and see if that is the
trigger.

Alan