mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 01/15] bitops: Change the bitmap index from int to unsigned long [generic]
@ 2009-02-25  4:42 Justin Chen
  0 siblings, 0 replies; only message in thread
From: Justin Chen @ 2009-02-25  4:42 UTC (permalink / raw)
  To: linux-arch; +Cc: bjorn.helgaas, justin.chen, linux-kernel

Change the index to unsigned long in all bitops for [generic]

Signed-off-by: Justin Chen <justin.chen@hp.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
---
 include/asm-generic/bitops/atomic.h     |   17 ++++++++++-------
 include/asm-generic/bitops/non-atomic.h |   19 +++++++++++--------
 2 files changed, 21 insertions(+), 15 deletions(-)
diff -Nru a/include/asm-generic/bitops/atomic.h b/include/asm-generic/bitops/atomic.h
--- a/include/asm-generic/bitops/atomic.h	2009-02-13 15:31:30.000000000 -0800
+++ b/include/asm-generic/bitops/atomic.h	2009-02-15 18:19:39.789134772 -0800
@@ -61,7 +61,7 @@
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void set_bit(int nr, volatile unsigned long *addr)
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -82,7 +82,7 @@
  * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
  * in order to ensure changes are visible on other processors.
  */
-static inline void clear_bit(int nr, volatile unsigned long *addr)
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -103,7 +103,7 @@
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void change_bit(int nr, volatile unsigned long *addr)
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -123,7 +123,8 @@
  * It may be reordered on other architectures than x86.
  * It also implies a memory barrier.
  */
-static inline int test_and_set_bit(int nr, volatile unsigned long *addr)
+static inline int
+test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -144,10 +145,11 @@
  * @addr: Address to count from
  *
  * This operation is atomic and cannot be reordered.
- * It can be reorderdered on other architectures other than x86.
+ * It can be reordered on architectures other than x86.
  * It also implies a memory barrier.
  */
-static inline int test_and_clear_bit(int nr, volatile unsigned long *addr)
+static inline int
+test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -170,7 +172,8 @@
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
+static inline int
+test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
diff -Nru a/include/asm-generic/bitops/non-atomic.h b/include/asm-generic/bitops/non-atomic.h
--- a/include/asm-generic/bitops/non-atomic.h	2009-02-13 15:31:30.000000000 -0800
+++ b/include/asm-generic/bitops/non-atomic.h	2009-02-15 18:19:39.792064459 -0800
@@ -12,7 +12,7 @@
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */
-static inline void __set_bit(int nr, volatile unsigned long *addr)
+static inline void __set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -20,7 +20,7 @@
 	*p  |= mask;
 }
 
-static inline void __clear_bit(int nr, volatile unsigned long *addr)
+static inline void __clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -37,7 +37,7 @@
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */
-static inline void __change_bit(int nr, volatile unsigned long *addr)
+static inline void __change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -54,7 +54,8 @@
  * If two examples of this operation race, one can appear to succeed
  * but actually fail.  You must protect multiple accesses with a lock.
  */
-static inline int __test_and_set_bit(int nr, volatile unsigned long *addr)
+static inline int
+__test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -73,7 +74,8 @@
  * If two examples of this operation race, one can appear to succeed
  * but actually fail.  You must protect multiple accesses with a lock.
  */
-static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr)
+static inline int
+__test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -84,8 +86,8 @@
 }
 
 /* WARNING: non atomic and it can be reordered! */
-static inline int __test_and_change_bit(int nr,
-					    volatile unsigned long *addr)
+static inline int
+__test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = BIT_MASK(nr);
 	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
@@ -100,7 +102,8 @@
  * @nr: bit number to test
  * @addr: Address to start counting from
  */
-static inline int test_bit(int nr, const volatile unsigned long *addr)
+static inline int
+test_bit(unsigned long nr, const volatile unsigned long *addr)
 {
 	return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
 }

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2009-02-25  4:40 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-02-25  4:42 [PATCH 01/15] bitops: Change the bitmap index from int to unsigned long [generic] Justin Chen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®