From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: torvalds@linux-foundation.org, linux-kernel@vger.kernel.org
Subject: [PATCH 24/27] tty: pl2303 needs identifiers for Siemens S81 as well as EF81
Date: Mon, 06 Apr 2009 17:35:12 +0100 [thread overview]
Message-ID: <20090406163507.12934.73352.stgit@t61.ukuu.org.uk> (raw)
In-Reply-To: <20090406162959.12934.97904.stgit@t61.ukuu.org.uk>
Closes bug 9065
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 4 ++++
2 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1aed584..751a533 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -79,6 +79,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
+ { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 54974f4..1d7a22e 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -7,6 +7,10 @@
* (at your option) any later version.
*
*/
+
+#define BENQ_VENDOR_ID 0x04a5
+#define BENQ_PRODUCT_ID_S81 0x4027
+
#define PL2303_VENDOR_ID 0x067b
#define PL2303_PRODUCT_ID 0x2303
#define PL2303_PRODUCT_ID_RSAQ2 0x04bb
next prev parent reply other threads:[~2009-04-06 15:40 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-06 16:31 [RESEND PATCH 00/27] Serial updates for 2.6.30 Alan Cox
2009-04-06 16:31 ` [PATCH 01/27] 8250_pnp.c: add another Wacom tablet Alan Cox
2009-04-06 16:32 ` [PATCH 02/27] serial: Update PNP IDs Alan Cox
2009-04-06 16:32 ` [PATCH 03/27] 8250_pci: add support for National Instruments 843x RS232 devices Alan Cox
2009-04-06 16:32 ` [PATCH 04/27] 8250_pci: add support for National Instruments legacy 8420 RS232 boards Alan Cox
2009-04-06 16:32 ` [PATCH 05/27] blackfin: BF538/9 serial uart support Alan Cox
2009-04-06 16:32 ` [PATCH 06/27] blackfin: Use unsigned long for flags with irq functions Alan Cox
2009-04-06 16:32 ` [PATCH 07/27] blackfin: Fix tty compile error in PIO mode Alan Cox
2009-04-06 16:32 ` [PATCH 08/27] Fix DMA rx ring buffer handling Alan Cox
2009-04-06 16:32 ` [PATCH 09/27] blackfin: Subtract ANOMALY_05000230 on quot Alan Cox
2009-04-06 16:32 ` [PATCH 10/27] applicom: Auto-load applicom module when device opened Alan Cox
2009-04-06 16:33 ` [PATCH 11/27] cyclades: Auto-load cyclades " Alan Cox
2009-04-06 16:33 ` [PATCH 12/27] specialix: Auto-load specialix " Alan Cox
2009-04-06 16:33 ` [PATCH 13/27] usb: Auto-load cdc_acm " Alan Cox
2009-04-06 16:33 ` [PATCH 14/27] riscom8: Auto-load riscom8 " Alan Cox
2009-04-06 16:33 ` [PATCH 15/27] ucc: Fix leaky error path Alan Cox
2009-04-06 16:33 ` [PATCH 16/27] isicom: isicom kref leak fix Alan Cox
2009-04-06 16:34 ` [PATCH 17/27] tty: moxa, fix refcounting in moxa_poll_port Alan Cox
2009-04-06 16:34 ` [PATCH 18/27] mxser: remove tty_port_tty_get from mxser_check_modem_status Alan Cox
2009-04-06 16:34 ` [PATCH 19/27] jsm: define init function as __devinit Alan Cox
2009-04-06 16:34 ` [PATCH 20/27] jsm: Fix the return variable and removing the unused retval Alan Cox
2009-04-06 16:34 ` [PATCH 21/27] mux: fix build problem Alan Cox
2009-04-06 16:34 ` [PATCH 22/27] icom: remove unused variables Alan Cox
2009-04-06 16:35 ` [PATCH 23/27] cdc-acm: zydas 1602 identifier needed Alan Cox
2009-04-06 16:35 ` Alan Cox [this message]
2009-04-06 16:35 ` [PATCH 25/27] symbol: Remove various bits of left over junk Alan Cox
2009-04-06 16:35 ` [PATCH 26/27] rio: addition has higher precedence than ?: Alan Cox
2009-04-06 16:35 ` [PATCH 27/27] 8250: Fix warning Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090406163507.12934.73352.stgit@t61.ukuu.org.uk \
--to=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®