[PATCH 4/7 revised II] mmc_spi: do not check CID and CSD blocks with CRC16

[PATCH 4/7 revised II] mmc_spi: do not check CID and CSD blocks with CRC16

[Wolfgang Mües]

From: Wolfgang Muees <wolfgang.mues@auerswald.de>

o Some cards are not able to calculate a valid CRC16 value
  for CID and CSD reads (CRC for 512 byte data blocks is OK).
  By moving the CRC enable after the read of CID and CSD, these
  cards can be used. This patch was tested with a faulty 8 GByte
  takeMS Class 6 SDHC card. This patch was suggested by
  Pierre Ossman <drzeus@drzeus.cx>.

Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>

---

diff -uprN 2_6_29_rc7_patch1253/drivers/mmc/core/sd.c 2_6_29_rc7_patch12534/drivers/mmc/core/sd.c
--- 2_6_29_rc7_patch1253/drivers/mmc/core/sd.c	2009-03-04 02:05:22.000000000 +0100
+++ 2_6_29_rc7_patch12534/drivers/mmc/core/sd.c	2009-04-07 15:39:22.000000000 +0200
@@ -363,15 +363,6 @@ static int mmc_sd_init_card(struct mmc_h
 		goto err;
 
 	/*
-	 * For SPI, enable CRC as appropriate.
-	 */
-	if (mmc_host_is_spi(host)) {
-		err = mmc_spi_set_crc(host, use_spi_crc);
-		if (err)
-			goto err;
-	}
-
-	/*
 	 * Fetch CID from card.
 	 */
 	if (mmc_host_is_spi(host))
@@ -458,6 +449,18 @@ static int mmc_sd_init_card(struct mmc_h
 	}
 
 	/*
+	 * For SPI, enable CRC as appropriate.
+	 * This CRC enable is located AFTER the reading of the
+	 * card registers because some SDHC cards are not able
+	 * to provide valid CRCs for non-512-byte blocks.
+	 */
+	if (mmc_host_is_spi(host)) {
+		err = mmc_spi_set_crc(host, use_spi_crc);
+		if (err)
+			goto free_card;
+	}
+
+	/*
 	 * Attempt to change to high-speed (if supported)
 	 */
 	err = mmc_switch_hs(card);
---
regards

i. A. Wolfgang Mües
-- 
Auerswald GmbH & Co. KG
Hardware Development
Telefon: +49 (0)5306 9219 0
Telefax: +49 (0)5306 9219 94 
E-Mail: Wolfgang.Mues@Auerswald.de
Web: http://www.auerswald.de
 
--------------------------------------------------------------
Auerswald GmbH & Co. KG, Vor den Grashöfen 1, 38162 Cremlingen
Registriert beim AG Braunschweig HRA 13289
p.h.G Auerswald Geschäftsführungsges. mbH
Registriert beim AG Braunschweig HRB 7463
Geschäftsführer: Dipl-Ing. Gerhard Auerswald

Re: [PATCH 4/7 revised II] mmc_spi: do not check CID and CSD blocks with CRC16

[Pierre Ossman]

[-- Attachment #1: Type: text/plain, Size: 819 bytes --]

On Tue, 7 Apr 2009 14:48:16 +0100
Wolfgang Mües <wolfgang.mues@auerswald.de> wrote:

> From: Wolfgang Muees <wolfgang.mues@auerswald.de>
> 
> o Some cards are not able to calculate a valid CRC16 value
>   for CID and CSD reads (CRC for 512 byte data blocks is OK).
>   By moving the CRC enable after the read of CID and CSD, these
>   cards can be used. This patch was tested with a faulty 8 GByte
>   takeMS Class 6 SDHC card. This patch was suggested by
>   Pierre Ossman <drzeus@drzeus.cx>.
> 
> Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
> 

Queued.

Thanks
-- 
     -- Pierre Ossman

  WARNING: This correspondence is being monitored by the
  Swedish government. Make sure your server uses encryption
  for SMTP traffic and consider using PGP for end-to-end
  encryption.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 198 bytes --]