From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
To: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org, akpm@linux-foundation.org,
axboe@kernel.dk, andrew.patterson@hp.com,
mikem@c18-ss-1-lb.cnet.com, scameron@beardog.cce.hp.com
Subject: [cciss: PATCH 11/17] Fix usage_count check in rebuild_lun_table when triggered via sysfs.
Date: Thu, 20 Aug 2009 10:18:38 -0500 [thread overview]
Message-ID: <20090820151838.22833.24533.stgit@beardog.cce.hp.com> (raw)
In-Reply-To: <20090820151648.22833.14168.stgit@beardog.cce.hp.com>
When rebuild_lun_table is reached via sysfs, the usage count that
is checked prior to messing with c0d0 has different constraints
(must be zero) than if rebuild_lun_table is reached via ioctl
(must be one.) Fix rebuild_lun_table to take that into account.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---
drivers/block/cciss.c | 33 +++++++++++++++++++++------------
1 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 8cd2f8e..14d4cd6 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -169,9 +169,9 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, int first_time);
+static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
static int deregister_disk(ctlr_info_t *h, int drv_index,
- int clear_all);
+ int clear_all, int via_ioctl);
static void cciss_read_capacity(int ctlr, int logvol, int withirq,
sector_t *total_size, unsigned int *block_size);
@@ -1210,7 +1210,7 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
case CCISS_DEREGDISK:
case CCISS_REGNEWD:
case CCISS_REVALIDVOLS:
- return rebuild_lun_table(host, 0);
+ return rebuild_lun_table(host, 0, 1);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
@@ -1756,7 +1756,8 @@ init_queue_failure:
* is also the controller node. Any changes to disk 0 will show up on
* the next reboot.
*/
-static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
+ int via_ioctl)
{
ctlr_info_t *h = hba[ctlr];
struct gendisk *disk;
@@ -1834,7 +1835,7 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
* which keeps the interrupt handler from starting
* the queue.
*/
- ret = deregister_disk(h, drv_index, 0);
+ ret = deregister_disk(h, drv_index, 0, via_ioctl);
h->drv[drv_index].busy_configuring = 0;
}
@@ -1999,7 +2000,8 @@ error:
* INPUT
* h = The controller to perform the operations on
*/
-static int rebuild_lun_table(ctlr_info_t *h, int first_time)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time,
+ int via_ioctl)
{
int ctlr = h->ctlr;
int num_luns;
@@ -2078,7 +2080,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
h->drv[i].busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- return_code = deregister_disk(h, i, 1);
+ return_code = deregister_disk(h, i, 1, via_ioctl);
h->drv[i].busy_configuring = 0;
}
}
@@ -2116,7 +2118,8 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
if (drv_index == -1)
goto freeret;
}
- cciss_update_drive_info(ctlr, drv_index, first_time);
+ cciss_update_drive_info(ctlr, drv_index, first_time,
+ via_ioctl);
} /* end for */
freeret:
@@ -2166,9 +2169,15 @@ static void cciss_clear_drive_info(drive_info_struct *drive_info)
* the disk in preparation for re-adding it. In this case
* the highest_lun should be left unchanged and the LunID
* should not be cleared.
+ * via_ioctl
+ * This indicates whether we've reached this path via ioctl.
+ * This affects the maximum usage count allowed for c0d0 to be messed with.
+ * If this path is reached via ioctl(), then the max_usage_count will
+ * be 1, as the process calling ioctl() has got to have the device open.
+ * If we get here via sysfs, then the max usage count will be zero.
*/
static int deregister_disk(ctlr_info_t *h, int drv_index,
- int clear_all)
+ int clear_all, int via_ioctl)
{
int i;
struct gendisk *disk;
@@ -2182,7 +2191,7 @@ static int deregister_disk(ctlr_info_t *h, int drv_index,
/* make sure logical volume is NOT is use */
if (clear_all || (h->gendisk[0] == disk)) {
- if (drv->usage_count > 1)
+ if (drv->usage_count > via_ioctl)
return -EBUSY;
} else if (drv->usage_count > 0)
return -EBUSY;
@@ -3451,7 +3460,7 @@ static int scan_thread(void *data)
mutex_unlock(&scan_mutex);
if (h) {
- rebuild_lun_table(h, 0);
+ rebuild_lun_table(h, 0, 0);
complete_all(&h->scan_wait);
mutex_lock(&scan_mutex);
h->busy_scanning = 0;
@@ -4251,7 +4260,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
hba[i]->cciss_max_sectors = 2048;
- rebuild_lun_table(hba[i], 1);
+ rebuild_lun_table(hba[i], 1, 0);
hba[i]->busy_initializing = 0;
return 1;
next prev parent reply other threads:[~2009-08-20 15:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-20 15:17 [cciss: PATCH 00/17] fix scan_thread, sysfs stuff, LUN addressing problem Stephen M. Cameron
2009-08-20 15:17 ` [cciss: PATCH 01/17] Remove sysfs entries for logical drives on driver cleanup Stephen M. Cameron
2009-08-20 15:17 ` [cciss: PATCH 02/17] Use one scan thread per controller and fix hang during rmmod Stephen M. Cameron
2009-08-20 15:17 ` [cciss: PATCH 03/17] Allow triggering of rescan of logical drive topology via sysfs entry Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 04/17] Remove some unused code in rebuild_lun_table() Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 05/17] Dynamically allocate struct device for each logical drive as needed Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 06/17] Rearrange logical drive sysfs code to make the "changing a disk" path work Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 07/17] Handle failure of blk_init_queue gracefully in cciss_add_disk Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 08/17] Handle cases when cciss_add_disk fails Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 09/17] Handle special case for sysfs attributes of the first logical drive Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 10/17] Clear all sysfs-exposed data for deleted logical drives Stephen M. Cameron
2009-08-20 15:18 ` Stephen M. Cameron [this message]
2009-08-20 15:18 ` [cciss: PATCH 12/17] Fix excessive gendisk freeing bug on driver unload Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 13/17] Silence noisy per-disk messages output by cciss_read_capacity Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 14/17] Preserve all 8 bytes of LUN ID for logical drives Stephen M. Cameron
2009-08-20 15:18 ` [cciss: PATCH 15/17] Add lunid attribute to each logical drive in /sys Stephen M. Cameron
2009-08-20 15:19 ` [cciss: PATCH 16/17] Add a "raid_level" " Stephen M. Cameron
2009-08-20 15:19 ` [cciss: PATCH 17/17] Add usage_count " Stephen M. Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090820151838.22833.24533.stgit@beardog.cce.hp.com \
--to=scameron@beardog.cce.hp.com \
--cc=akpm@linux-foundation.org \
--cc=andrew.patterson@hp.com \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mikem@c18-ss-1-lb.cnet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome