mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
To: akpm@linux-foundation.org, axboe@kernel.dk
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
	andrew.patterson@hp.com, mikem@beardog.cce.hp.com,
	scameron@beardog.cce.hp.com
Subject: [PATCH 08/20] cciss: Handle cases when cciss_add_disk fails.
Date: Thu, 17 Sep 2009 13:47:29 -0500	[thread overview]
Message-ID: <20090917184729.15105.88712.stgit@beardog.cce.hp.com> (raw)
In-Reply-To: <20090917184310.15105.43508.stgit@beardog.cce.hp.com>

Handle cases when cciss_add_disk fails.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---

 drivers/block/cciss.c |   35 +++++++++++++++++++++++++----------
 1 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 60fe3c6..7043b3b 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -199,6 +199,7 @@ static int scan_thread(void *data);
 static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
 static void cciss_hba_release(struct device *dev);
 static void cciss_device_release(struct device *dev);
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
 
 #ifdef CONFIG_PROC_FS
 static void cciss_procinit(int i);
@@ -1855,8 +1856,14 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
 	 * (raid_leve == -1) then we want to update the
 	 * logical drive's information.
 	 */
-	if (drv_index || first_time)
-		cciss_add_disk(h, disk, drv_index);
+	if (drv_index || first_time) {
+		if (cciss_add_disk(h, disk, drv_index) != 0) {
+			cciss_free_gendisk(h, drv_index);
+			printk(KERN_WARNING "cciss:%d could not update "
+				"disk %d\n", h->ctlr, drv_index);
+			--h->num_luns;
+		}
+	}
 
 freeret:
 	kfree(inq_buff);
@@ -1890,6 +1897,12 @@ static int cciss_find_free_drive_index(int ctlr, int controller_node)
 	return -1;
 }
 
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index)
+{
+	put_disk(h->gendisk[drv_index]);
+	h->gendisk[drv_index] = NULL;
+}
+
 /* cciss_add_gendisk finds a free hba[]->drv structure
  * and allocates a gendisk if needed, and sets the lunid
  * in the drvinfo structure.   It returns the index into
@@ -1930,8 +1943,7 @@ static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
 	return drv_index;
 
 err_free_disk:
-	put_disk(h->gendisk[drv_index]);
-	h->gendisk[drv_index] = NULL;
+	cciss_free_gendisk(h, drv_index);
 	return -1;
 }
 
@@ -1949,11 +1961,8 @@ static void cciss_add_controller_node(ctlr_info_t *h)
 		return;
 
 	drv_index = cciss_add_gendisk(h, 0, 1);
-	if (drv_index == -1) {
-		printk(KERN_WARNING "cciss%d: could not "
-			"add disk 0.\n", h->ctlr);
-		return;
-	}
+	if (drv_index == -1)
+		goto error;
 	h->drv[drv_index].block_size = 512;
 	h->drv[drv_index].nr_blocks = 0;
 	h->drv[drv_index].heads = 0;
@@ -1962,7 +1971,13 @@ static void cciss_add_controller_node(ctlr_info_t *h)
 	h->drv[drv_index].raid_level = -1;
 	memset(h->drv[drv_index].serial_no, 0, 16);
 	disk = h->gendisk[drv_index];
-	cciss_add_disk(h, disk, drv_index);
+	if (cciss_add_disk(h, disk, drv_index) == 0)
+		return;
+	cciss_free_gendisk(h, drv_index);
+error:
+	printk(KERN_WARNING "cciss%d: could not "
+		"add disk 0.\n", h->ctlr);
+	return;
 }
 
 /* This function will add and remove logical drives from the Logical


  parent reply	other threads:[~2009-09-17 18:47 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-17 18:46 [PATCH 00/20] cciss: fix scan_thread, sysfs stuff, dynamically allocate per drive structure Stephen M. Cameron
2009-09-17 18:46 ` [PATCH 01/20] cciss: Remove sysfs entries for logical drives on driver cleanup Stephen M. Cameron
2009-09-17 18:46 ` [PATCH 02/20] cciss: Use one scan thread per controller and fix hang during rmmod Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 03/20] cciss: Allow triggering of rescan of logical drive topology via sysfs entry Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 04/20] cciss: Remove some unused code in rebuild_lun_table() Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 05/20] cciss: Dynamically allocate struct device for each logical drive as needed Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 06/20] cciss: Rearrange logical drive sysfs code to make the "changing a disk" path work Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 07/20] cciss: Handle failure of blk_init_queue gracefully in cciss_add_disk Stephen M. Cameron
2009-09-17 18:47 ` Stephen M. Cameron [this message]
2009-09-17 18:47 ` [PATCH 09/20] cciss: Handle special case for sysfs attributes of the first logical drive Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 10/20] cciss: Clear all sysfs-exposed data for deleted logical drives Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 11/20] cciss: Fix usage_count check in rebuild_lun_table when triggered via sysfs Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 12/20] cciss: Fix excessive gendisk freeing bug on driver unload Stephen M. Cameron
2009-09-17 18:47 ` [PATCH 13/20] cciss: Silence noisy per-disk messages output by cciss_read_capacity Stephen M. Cameron
2009-09-17 18:48 ` [PATCH 14/20] cciss: Preserve all 8 bytes of LUN ID for logical drives Stephen M. Cameron
2009-09-17 18:48 ` [PATCH 15/20] cciss: Don't check h->busy_initializing in cciss_open() Stephen M. Cameron
2009-09-17 18:48 ` [PATCH 16/20] cciss: Add lunid attribute to each logical drive in /sys Stephen M. Cameron
2009-09-17 18:48 ` [PATCH 17/20] cciss: fix some magic numbers in the raid-level decoding Stephen M. Cameron
2009-09-17 18:48 ` [PATCH 18/20] cciss: Add a "raid_level" attribute to each logical drive in /sys Stephen M. Cameron
2009-09-17 18:48 ` [PATCH 19/20] cciss: Add usage_count " Stephen M. Cameron
2009-09-17 18:48 ` [PATCH 20/20] cciss: Dynamically allocate the drive_info_struct for each logical drive Stephen M. Cameron
2009-09-18 20:14 ` [PATCH 00/20] cciss: fix scan_thread, sysfs stuff, dynamically allocate per drive structure Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090917184729.15105.88712.stgit@beardog.cce.hp.com \
    --to=scameron@beardog.cce.hp.com \
    --cc=akpm@linux-foundation.org \
    --cc=andrew.patterson@hp.com \
    --cc=axboe@kernel.dk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mikem@beardog.cce.hp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome