ThinkPad T400 and the mute button ...

ThinkPad T400 and the mute button ...

[Toralf Förster]

It works - but only if the T400 is plugged into the docking station. Then both
the mute button at the T400 and the button of the external keyboard works fine.
However w/o the docking station pressing the mute button of the T400
gives under KDE the graphical response "mute on" - but that's all, the sound
isn't muted.

Is this behaviour known/expected or worth a bug report ?

BTW the BIOS is at the latest level (I hoped to avoid the command line 
eboot=pci w/ the new BIOS but no chance, that parameter is necessary to avoid
an extra wait of about 10 seconds during reboot). OTOH the Intel Management
Extension is way older but I'd like to avoid updating it.

-- 
MfG/Sincerely

Toralf Förster
pgp finger print: 7B1A 07F4 EC82 0F90 D4C2 8936 872A E508 7DB6 9DA3

Re: ThinkPad T400 and the mute button ...

[Henrique de Moraes Holschuh]

On Mon, 21 Sep 2009, Toralf Förster wrote:
> It works - but only if the T400 is plugged into the docking station. Then both
> the mute button at the T400 and the button of the external keyboard works fine.
> However w/o the docking station pressing the mute button of the T400
> gives under KDE the graphical response "mute on" - but that's all, the sound
> isn't muted.
> 
> Is this behaviour known/expected or worth a bug report ?

1. go single user, text mode.  No userspace HAL/udev/KDE/GNOME crap allowed
for these tests ;-)

2. Test mute/unmute in both keyboards, and check *WHICH* audio outputs get
muted.  You have at least three: dock line-out, built-in speakers, built-in
headphone-out.  Remember that some thinkpads (those without a MUTE LED) use
a single press of volume up or down as unmute.

3. do the same testing using the alsa HDA mixer.

4. Anything that doesn't light-up the MUTE LED is doing it on the HDA mixer.
If you don't have a MUTE led, it gets far more difficult to know what is
happening :-(

5. thinkpad-acpi can tell you if the firmware thinks the internal MUTE gate
is enabled or not: cat /proc/acpi/ibm/volume.  It won't be able to *set*
mute state, AFAIK.  But it can read it.

> BTW the BIOS is at the latest level (I hoped to avoid the command line 
> eboot=pci w/ the new BIOS but no chance, that parameter is necessary to avoid

Get someone to write a proper, specific bug report that could be sent to a
BIOS engineer, pinpointing what is wrong and what should be fixed, and
either I or the SuSE people can forward it to Lenovo.

-- 
  "One disk to rule them all, One disk to find them. One disk to bring
  them all and in the darkness grind them. In the Land of Redmond
  where the shadows lie." -- The Silicon Valley Tarot
  Henrique Holschuh