[patch 1/4] dmar: support for parsing Remapping Hardware Static Affinity structure

[patch 1/4] dmar: support for parsing Remapping Hardware Static Affinity structure

[Suresh Siddha]

[-- Attachment #1: parse_rhsa_struct.patch --]
[-- Type: text/plain, Size: 2162 bytes --]

Add support for parsing Remapping Hardware Static Affinity (RHSA) structure.
This enables identifying the association between remapping hardware units and
the corresponding proximity domain. This enables to allocate transalation
structures closer to the remapping hardware unit.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 drivers/pci/dmar.c          |   24 +++++++++++++++++++++++-
 include/linux/intel-iommu.h |    1 +
 2 files changed, 24 insertions(+), 1 deletion(-)

Index: iommu-2.6/drivers/pci/dmar.c
===================================================================
--- iommu-2.6.orig/drivers/pci/dmar.c
+++ iommu-2.6/drivers/pci/dmar.c
@@ -348,6 +348,26 @@ found:
 }
 #endif
 
+static int __init
+dmar_parse_one_rhsa(struct acpi_dmar_header *header)
+{
+	struct acpi_dmar_rhsa *rhsa;
+	struct dmar_drhd_unit *drhd;
+
+	rhsa = (struct acpi_dmar_rhsa *)header;
+	for_each_drhd_unit(drhd)
+		if (drhd->reg_base_addr == rhsa->base_address) {
+			int node = acpi_map_pxm_to_node(rhsa->proximity_domain);
+
+			if (!node_online(node))
+				node = -1;
+			drhd->iommu->node = node;
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
 static void __init
 dmar_table_print_dmar_entry(struct acpi_dmar_header *header)
 {
@@ -467,7 +487,7 @@ parse_dmar_table(void)
 #endif
 			break;
 		case ACPI_DMAR_HARDWARE_AFFINITY:
-			/* We don't do anything with RHSA (yet?) */
+			ret = dmar_parse_one_rhsa(entry_header);
 			break;
 		default:
 			printk(KERN_WARNING PREFIX
@@ -677,6 +697,8 @@ int alloc_iommu(struct dmar_drhd_unit *d
 	iommu->agaw = agaw;
 	iommu->msagaw = msagaw;
 
+	iommu->node = -1;
+
 	/* the registers might be more than one page */
 	map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap),
 		cap_max_fault_reg_offset(iommu->cap));
Index: iommu-2.6/include/linux/intel-iommu.h
===================================================================
--- iommu-2.6.orig/include/linux/intel-iommu.h
+++ iommu-2.6/include/linux/intel-iommu.h
@@ -332,6 +332,7 @@ struct intel_iommu {
 #ifdef CONFIG_INTR_REMAP
 	struct ir_table *ir_table;	/* Interrupt remapping info */
 #endif
+	int		node;
 };
 
 static inline void __iommu_flush_cache(

[patch 2/4] dmar: Allocate queued invalidation structure using numa locality info

[Suresh Siddha]

[-- Attachment #1: qi_use_affinity_info.patch --]
[-- Type: text/plain, Size: 1096 bytes --]

Allocate queued invalidation descriptor structures using numa locality info.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 drivers/pci/dmar.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Index: iommu-2.6/drivers/pci/dmar.c
===================================================================
--- iommu-2.6.orig/drivers/pci/dmar.c
+++ iommu-2.6/drivers/pci/dmar.c
@@ -1040,6 +1040,7 @@ static void __dmar_enable_qi(struct inte
 int dmar_enable_qi(struct intel_iommu *iommu)
 {
 	struct q_inval *qi;
+	struct page *desc_page;
 
 	if (!ecap_qis(iommu->ecap))
 		return -ENOENT;
@@ -1056,13 +1057,16 @@ int dmar_enable_qi(struct intel_iommu *i
 
 	qi = iommu->qi;
 
-	qi->desc = (void *)(get_zeroed_page(GFP_ATOMIC));
-	if (!qi->desc) {
+
+	desc_page = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO, 0);
+	if (!desc_page) {
 		kfree(qi);
 		iommu->qi = 0;
 		return -ENOMEM;
 	}
 
+	qi->desc = page_address(desc_page);
+
 	qi->desc_status = kmalloc(QI_LENGTH * sizeof(int), GFP_ATOMIC);
 	if (!qi->desc_status) {
 		free_page((unsigned long) qi->desc);

[patch 3/4] intr_remap: Allocate intr-remapping table using numa locality info

[Suresh Siddha]

[-- Attachment #1: intr_remap_use_affinity_info.patch --]
[-- Type: text/plain, Size: 913 bytes --]

Allocate intr-remapping table using numa locality info. On platforms
having remapping hardware units span different nodes, this enables
optimized intr-remapping table entry access by remapping hardware.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 drivers/pci/intr_remapping.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Index: iommu-2.6/drivers/pci/intr_remapping.c
===================================================================
--- iommu-2.6.orig/drivers/pci/intr_remapping.c
+++ iommu-2.6/drivers/pci/intr_remapping.c
@@ -548,7 +548,8 @@ static int setup_intr_remapping(struct i
 	if (!iommu->ir_table)
 		return -ENOMEM;
 
-	pages = alloc_pages(GFP_ATOMIC | __GFP_ZERO, INTR_REMAP_PAGE_ORDER);
+	pages = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO,
+				 INTR_REMAP_PAGE_ORDER);
 
 	if (!pages) {
 		printk(KERN_ERR "failed to allocate pages of order %d\n",

[patch 3/4] intr_remap: Allocate intr-remapping table using numa locality info

[Suresh Siddha]

[-- Attachment #1: intr_remap_use_affinity_info.patch --]
[-- Type: text/plain, Size: 895 bytes --]

Allocate intr-remapping table using numa locality info. On platforms
having remapping hardware units span different nodes, this enables
optimized intr-remapping table entry access by remapping hardware.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
 drivers/pci/intr_remapping.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Index: tip/drivers/pci/intr_remapping.c
===================================================================
--- tip.orig/drivers/pci/intr_remapping.c
+++ tip/drivers/pci/intr_remapping.c
@@ -590,7 +590,8 @@ static int setup_intr_remapping(struct i
 	if (!iommu->ir_table)
 		return -ENOMEM;
 
-	pages = alloc_pages(GFP_ATOMIC | __GFP_ZERO, INTR_REMAP_PAGE_ORDER);
+	pages = alloc_pages_node(iommu->node, GFP_ATOMIC | __GFP_ZERO,
+				 INTR_REMAP_PAGE_ORDER);
 
 	if (!pages) {
 		printk(KERN_ERR "failed to allocate pages of order %d\n",