[patch 1/9] eeprom_93cx6: Add data direction control.

[patch 1/9] eeprom_93cx6: Add data direction control.

[Ben Dooks]

[-- Attachment #1: 93c-eeprom-add-direction.patch --]
[-- Type: text/plain, Size: 2337 bytes --]

Some devices need to know if the data is to be output or read, so add a
data direction into the eeprom structure to tell the driver whether the
data line should be driven.

The user in this case is the Micrel KS8851 which has a direction
control for the EEPROM data line and thus needs to know whether
to drive it (writing) or to tristate it for receiving.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>

--
 drivers/misc/eeprom/eeprom_93cx6.c |    3 +++
 include/linux/eeprom_93cx6.h       |    2 ++
 2 files changed, 5 insertions(+)

Index: b/drivers/misc/eeprom/eeprom_93cx6.c
===================================================================
--- a/drivers/misc/eeprom/eeprom_93cx6.c	2009-10-06 15:35:38.000000000 +0100
+++ b/drivers/misc/eeprom/eeprom_93cx6.c	2009-10-06 15:51:18.000000000 +0100
@@ -70,6 +70,7 @@ static void eeprom_93cx6_startup(struct 
 	eeprom->reg_data_out = 0;
 	eeprom->reg_data_clock = 0;
 	eeprom->reg_chip_select = 1;
+	eeprom->drive_data = 1;
 	eeprom->register_write(eeprom);
 
 	/*
@@ -108,6 +109,7 @@ static void eeprom_93cx6_write_bits(stru
 	 */
 	eeprom->reg_data_in = 0;
 	eeprom->reg_data_out = 0;
+	eeprom->drive_data = 1;
 
 	/*
 	 * Start writing all bits.
@@ -147,6 +149,7 @@ static void eeprom_93cx6_read_bits(struc
 	 */
 	eeprom->reg_data_in = 0;
 	eeprom->reg_data_out = 0;
+	eeprom->drive_data = 0;
 
 	/*
 	 * Start reading all bits.
Index: b/include/linux/eeprom_93cx6.h
===================================================================
--- a/include/linux/eeprom_93cx6.h	2009-10-06 15:35:38.000000000 +0100
+++ b/include/linux/eeprom_93cx6.h	2009-10-06 15:51:18.000000000 +0100
@@ -45,6 +45,7 @@
  * @register_write(struct eeprom_93cx6 *eeprom): handler to
  * write to the eeprom register by using all reg_* fields.
  * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines
+ * @drive_data: Set if we're driving the data line.
  * @reg_data_in: register field to indicate data input
  * @reg_data_out: register field to indicate data output
  * @reg_data_clock: register field to set the data clock
@@ -61,6 +62,7 @@ struct eeprom_93cx6 {
 
 	int width;
 
+	char drive_data;
 	char reg_data_in;
 	char reg_data_out;
 	char reg_data_clock;

Re: [patch 1/9] eeprom_93cx6: Add data direction control.

[Jean Delvare]

On Mon, 07 Dec 2009 12:17:28 +0000, Ben Dooks wrote:
> Some devices need to know if the data is to be output or read, so add a
> data direction into the eeprom structure to tell the driver whether the
> data line should be driven.
> 
> The user in this case is the Micrel KS8851 which has a direction
> control for the EEPROM data line and thus needs to know whether
> to drive it (writing) or to tristate it for receiving.
> 
> Signed-off-by: Ben Dooks <ben@simtec.co.uk>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Jean Delvare <khali@linux-fr.org>
> Cc: Linux Kernel <linux-kernel@vger.kernel.org>

FYI, I will not be reviewing this patch nor any other patch to the
eeprom_93cx6 driver. I have no clue what these devices are, no access
to any and no interest in them either.

-- 
Jean Delvare

Re: [patch 1/9] eeprom_93cx6: Add data direction control.

[Ben Dooks]

Jean Delvare wrote:
> On Mon, 07 Dec 2009 12:17:28 +0000, Ben Dooks wrote:
>> Some devices need to know if the data is to be output or read, so add a
>> data direction into the eeprom structure to tell the driver whether the
>> data line should be driven.
>>
>> The user in this case is the Micrel KS8851 which has a direction
>> control for the EEPROM data line and thus needs to know whether
>> to drive it (writing) or to tristate it for receiving.
>>
>> Signed-off-by: Ben Dooks <ben@simtec.co.uk>
>> Cc: Wolfram Sang <w.sang@pengutronix.de>
>> Cc: Jean Delvare <khali@linux-fr.org>
>> Cc: Linux Kernel <linux-kernel@vger.kernel.org>
> 
> FYI, I will not be reviewing this patch nor any other patch to the
> eeprom_93cx6 driver. I have no clue what these devices are, no access
> to any and no interest in them either.

Ok, scripts/get_maintainer.pl came up with yourself, Wolfram and linux-kernel
as the people to send this to.

-- 
Ben Dooks, Design & Software Engineer, Simtec Electronics

http://www.simtec.co.uk/

[patch 2/9] eeprom_93cx6: Add write support

[Ben Dooks]

[-- Attachment #1: 93c-eeprom-add-write.patch --]
[-- Type: text/plain, Size: 3857 bytes --]

Add support for writing data to EEPROM.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>

---
 drivers/misc/eeprom/eeprom_93cx6.c |   86 +++++++++++++++++++++++++++++++++++++
 include/linux/eeprom_93cx6.h       |    7 +++
 2 files changed, 93 insertions(+)

Index: b/drivers/misc/eeprom/eeprom_93cx6.c
===================================================================
--- a/drivers/misc/eeprom/eeprom_93cx6.c	2009-10-06 15:51:18.000000000 +0100
+++ b/drivers/misc/eeprom/eeprom_93cx6.c	2009-10-06 15:54:36.000000000 +0100
@@ -241,3 +241,89 @@ void eeprom_93cx6_multiread(struct eepro
 }
 EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
 
+
+/**
+ * eeprom_93cx6_wren - set the write enable state
+ * @eeprom: Pointer to eeprom structure
+ * @enable: true to enable writes, otherwise disable writes
+ *
+ * Set the EEPROM write enable state to either allow or deny
+ * writes depending on the @enable value.
+ */
+void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable)
+{
+	u16 command;
+
+	/* start the command */
+	eeprom_93cx6_startup(eeprom);
+
+	/* create command to enable/disable */
+
+	command = enable ? PCI_EEPROM_EWEN_OPCODE : PCI_EEPROM_EWDS_OPCODE;
+	command <<= (eeprom->width - 2);
+
+	eeprom_93cx6_write_bits(eeprom, command,
+				PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_wren);
+
+/**
+ * eeprom_93cx6_write - write data to the EEPROM
+ * @eeprom: Pointer to eeprom structure
+ * @addr: Address to write data to.
+ * @data: The data to write to address @addr.
+ *
+ * Write the @data to the specified @addr in the EEPROM and
+ * waiting for the device to finish writing.
+ *
+ * Note, since we do not expect large number of write operations
+ * we use msleep() to delay in between parts of the operation to
+ * avoid using excessive amounts of CPU time busy waiting.
+ */
+void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data)
+{
+	int timeout = 100;
+	u16 command;
+
+	/* start the command */
+	eeprom_93cx6_startup(eeprom);
+
+	command = PCI_EEPROM_WRITE_OPCODE << eeprom->width;
+	command |= addr;
+
+	/* send write command */
+	eeprom_93cx6_write_bits(eeprom, command,
+				PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+	/* send data */
+	eeprom_93cx6_write_bits(eeprom, data, 16);
+
+	/* get ready to check for busy */
+	eeprom->drive_data = 0;
+	eeprom->reg_chip_select = 1;
+	eeprom->register_write(eeprom);
+
+	/* wait at-least 250ns to get DO to be the busy signal */
+	msleep(1);
+
+	/* wait for DO to go high to signify finish */
+
+	while (true) {
+		eeprom->register_read(eeprom);
+
+		if (eeprom->reg_data_out)
+			break;
+
+		msleep(1);
+
+		if (--timeout <= 0) {
+			printk(KERN_ERR "%s: timeout\n", __func__);
+			break;
+		}			
+	}
+
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_write);
Index: b/include/linux/eeprom_93cx6.h
===================================================================
--- a/include/linux/eeprom_93cx6.h	2009-10-06 15:51:18.000000000 +0100
+++ b/include/linux/eeprom_93cx6.h	2009-10-06 15:53:16.000000000 +0100
@@ -32,6 +32,7 @@
 #define PCI_EEPROM_WIDTH_93C66	8
 #define PCI_EEPROM_WIDTH_OPCODE	3
 #define PCI_EEPROM_WRITE_OPCODE	0x05
+#define PCI_EEPROM_ERASE_OPCODE 0x07
 #define PCI_EEPROM_READ_OPCODE	0x06
 #define PCI_EEPROM_EWDS_OPCODE	0x10
 #define PCI_EEPROM_EWEN_OPCODE	0x13
@@ -73,3 +74,9 @@ extern void eeprom_93cx6_read(struct eep
 	const u8 word, u16 *data);
 extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
 	const u8 word, __le16 *data, const u16 words);
+
+extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable);
+
+extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom,
+			       u8 addr, u16 data);
+

[patch 2/9] eeprom_93cx6: Add write support

[ben]

[-- Attachment #1: 93c-eeprom-add-write.patch --]
[-- Type: text/plain, Size: 3857 bytes --]

Add support for writing data to EEPROM.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>

---
 drivers/misc/eeprom/eeprom_93cx6.c |   86 +++++++++++++++++++++++++++++++++++++
 include/linux/eeprom_93cx6.h       |    7 +++
 2 files changed, 93 insertions(+)

Index: b/drivers/misc/eeprom/eeprom_93cx6.c
===================================================================
--- a/drivers/misc/eeprom/eeprom_93cx6.c	2009-10-06 15:51:18.000000000 +0100
+++ b/drivers/misc/eeprom/eeprom_93cx6.c	2009-10-06 15:54:36.000000000 +0100
@@ -241,3 +241,89 @@ void eeprom_93cx6_multiread(struct eepro
 }
 EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
 
+
+/**
+ * eeprom_93cx6_wren - set the write enable state
+ * @eeprom: Pointer to eeprom structure
+ * @enable: true to enable writes, otherwise disable writes
+ *
+ * Set the EEPROM write enable state to either allow or deny
+ * writes depending on the @enable value.
+ */
+void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable)
+{
+	u16 command;
+
+	/* start the command */
+	eeprom_93cx6_startup(eeprom);
+
+	/* create command to enable/disable */
+
+	command = enable ? PCI_EEPROM_EWEN_OPCODE : PCI_EEPROM_EWDS_OPCODE;
+	command <<= (eeprom->width - 2);
+
+	eeprom_93cx6_write_bits(eeprom, command,
+				PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_wren);
+
+/**
+ * eeprom_93cx6_write - write data to the EEPROM
+ * @eeprom: Pointer to eeprom structure
+ * @addr: Address to write data to.
+ * @data: The data to write to address @addr.
+ *
+ * Write the @data to the specified @addr in the EEPROM and
+ * waiting for the device to finish writing.
+ *
+ * Note, since we do not expect large number of write operations
+ * we use msleep() to delay in between parts of the operation to
+ * avoid using excessive amounts of CPU time busy waiting.
+ */
+void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, u8 addr, u16 data)
+{
+	int timeout = 100;
+	u16 command;
+
+	/* start the command */
+	eeprom_93cx6_startup(eeprom);
+
+	command = PCI_EEPROM_WRITE_OPCODE << eeprom->width;
+	command |= addr;
+
+	/* send write command */
+	eeprom_93cx6_write_bits(eeprom, command,
+				PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+	/* send data */
+	eeprom_93cx6_write_bits(eeprom, data, 16);
+
+	/* get ready to check for busy */
+	eeprom->drive_data = 0;
+	eeprom->reg_chip_select = 1;
+	eeprom->register_write(eeprom);
+
+	/* wait at-least 250ns to get DO to be the busy signal */
+	msleep(1);
+
+	/* wait for DO to go high to signify finish */
+
+	while (true) {
+		eeprom->register_read(eeprom);
+
+		if (eeprom->reg_data_out)
+			break;
+
+		msleep(1);
+
+		if (--timeout <= 0) {
+			printk(KERN_ERR "%s: timeout\n", __func__);
+			break;
+		}			
+	}
+
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_write);
Index: b/include/linux/eeprom_93cx6.h
===================================================================
--- a/include/linux/eeprom_93cx6.h	2009-10-06 15:51:18.000000000 +0100
+++ b/include/linux/eeprom_93cx6.h	2009-10-06 15:53:16.000000000 +0100
@@ -32,6 +32,7 @@
 #define PCI_EEPROM_WIDTH_93C66	8
 #define PCI_EEPROM_WIDTH_OPCODE	3
 #define PCI_EEPROM_WRITE_OPCODE	0x05
+#define PCI_EEPROM_ERASE_OPCODE 0x07
 #define PCI_EEPROM_READ_OPCODE	0x06
 #define PCI_EEPROM_EWDS_OPCODE	0x10
 #define PCI_EEPROM_EWEN_OPCODE	0x13
@@ -73,3 +74,9 @@ extern void eeprom_93cx6_read(struct eep
 	const u8 word, u16 *data);
 extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
 	const u8 word, __le16 *data, const u16 words);
+
+extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable);
+
+extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom,
+			       u8 addr, u16 data);
+