mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Suresh Siddha <suresh.b.siddha@intel.com>
To: Mike Galbraith <efault@gmx.de>,
	Peter Zijlstra <a.p.zijlstra@chello.nl>,
	Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@linux.jf.intel.com>,
	linux-kernel@vger.kernel.org,
	Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>,
	Yanmin Zhang <yanmin_zhang@linux.jf.intel.com>,
	Gautham R Shenoy <ego@in.ibm.com>,
	Suresh Siddha <suresh.b.siddha@intel.com>
Subject: [patch v2 2/2] sched: fix select_idle_sibling() logic in select_task_rq_fair()
Date: Mon, 08 Mar 2010 14:19:37 -0800	[thread overview]
Message-ID: <20100308221946.932207084@sbs-t61.sc.intel.com> (raw)
In-Reply-To: <20100308221946.842728363@sbs-t61.sc.intel.com>

[-- Attachment #1: fix_select_idle_sibling.patch --]
[-- Type: text/plain, Size: 4350 bytes --]

Address these issues in the current select_idle_sibling() logic.

a) Once we select the idle sibling, we use that domain (spanning the cpu that
   the task is currently woken-up and the idle sibling that we found) in our
   wake_affine() comparisons. This domain is completely different from the
   domain(we are supposed to use) that spans the cpu that the task currently
   woken-up and the cpu where the task previously ran.

b) We do select_idle_sibling() check only for the cpu that the task is
   currently woken-up on. If select_task_rq_fair() selects the previously run
   cpu for waking the task no, doing a select_idle_sibling() check
   for that cpu also helps and we don't do this currently.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
Changes from v1:
   Drop treating the current cpu with one running task as an idle cpu in the
   presence of sync wakeup.
---
 kernel/sched_fair.c |   69 +++++++++++++++++++++++++++-------------------------
 1 file changed, 36 insertions(+), 33 deletions(-)

Index: tip/kernel/sched_fair.c
===================================================================
--- tip.orig/kernel/sched_fair.c
+++ tip/kernel/sched_fair.c
@@ -1407,28 +1407,48 @@ find_idlest_cpu(struct sched_group *grou
  * Try and locate an idle CPU in the sched_domain.
  */
 static int
-select_idle_sibling(struct task_struct *p, struct sched_domain *sd, int target)
+select_idle_sibling(struct task_struct *p, int target)
 {
 	int cpu = smp_processor_id();
 	int prev_cpu = task_cpu(p);
 	int i;
+	struct sched_domain *sd;
 
 	/*
-	 * If this domain spans both cpu and prev_cpu (see the SD_WAKE_AFFINE
-	 * test in select_task_rq_fair) and the prev_cpu is idle then that's
-	 * always a better target than the current cpu.
+	 * If the task is going to be woken-up on this cpu and if it is
+	 * already idle, then it is the right target.
 	 */
-	if (target == cpu && !cpu_rq(prev_cpu)->cfs.nr_running)
+	if (target == cpu && !cpu_rq(cpu)->cfs.nr_running)
+		return cpu;
+
+	/*
+	 * If the task is going to be woken-up on the cpu where it previously
+	 * ran and if it is currently idle, then it the right target.
+	 */
+	if (target == prev_cpu && !cpu_rq(prev_cpu)->cfs.nr_running)
 		return prev_cpu;
 
 	/*
-	 * Otherwise, iterate the domain and find an elegible idle cpu.
+	 * Otherwise, iterate the domains and find an elegible idle cpu.
 	 */
-	for_each_cpu_and(i, sched_domain_span(sd), &p->cpus_allowed) {
-		if (!cpu_rq(i)->cfs.nr_running) {
-			target = i;
+	for_each_domain(target, sd) {
+		if (!(sd->flags & SD_SHARE_PKG_RESOURCES))
 			break;
+
+		for_each_cpu_and(i, sched_domain_span(sd), &p->cpus_allowed) {
+			if (!cpu_rq(i)->cfs.nr_running) {
+				target = i;
+				break;
+			}
 		}
+
+		/*
+		 * Lets stop looking for an idle sibling when we reached
+		 * the domain that spans the current cpu and prev_cpu.
+		 */
+		if (cpumask_test_cpu(cpu, sched_domain_span(sd)) &&
+		    cpumask_test_cpu(prev_cpu, sched_domain_span(sd)))
+			break;
 	}
 
 	return target;
@@ -1491,34 +1511,15 @@ static int select_task_rq_fair(struct ta
 				want_sd = 0;
 		}
 
-		/*
-		 * While iterating the domains looking for a spanning
-		 * WAKE_AFFINE domain, adjust the affine target to any idle cpu
-		 * in cache sharing domains along the way.
-		 */
 		if (want_affine) {
-			int target = -1;
-
 			/*
 			 * If both cpu and prev_cpu are part of this domain,
 			 * cpu is a valid SD_WAKE_AFFINE target.
 			 */
-			if (cpumask_test_cpu(prev_cpu, sched_domain_span(tmp)))
-				target = cpu;
-
-			/*
-			 * If there's an idle sibling in this domain, make that
-			 * the wake_affine target instead of the current cpu.
-			 */
-			if (tmp->flags & SD_SHARE_PKG_RESOURCES)
-				target = select_idle_sibling(p, tmp, target);
-
-			if (target >= 0) {
-				if (tmp->flags & SD_WAKE_AFFINE) {
-					affine_sd = tmp;
-					want_affine = 0;
-				}
-				cpu = target;
+			if (cpumask_test_cpu(prev_cpu, sched_domain_span(tmp))
+			    && (tmp->flags & SD_WAKE_AFFINE)) {
+				affine_sd = tmp;
+				want_affine = 0;
 			}
 		}
 
@@ -1548,7 +1549,9 @@ static int select_task_rq_fair(struct ta
 
 	if (affine_sd) {
 		if (this_cpu == prev_cpu || wake_affine(affine_sd, p, sync))
-			return cpu;
+			return select_idle_sibling(p, this_cpu);
+		else if (!sd)
+			return select_idle_sibling(p, prev_cpu);
 	}
 
 	while (sd) {



  reply	other threads:[~2010-03-08 22:22 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-08 22:19 [patch v2 1/2] sched: check for prev_cpu == this_cpu before calling wake_affine() Suresh Siddha
2010-03-08 22:19 ` Suresh Siddha [this message]
2010-03-31 10:25 ` Peter Zijlstra
2010-03-31 23:47   ` Suresh Siddha
2010-04-01  5:32     ` Mike Galbraith
2010-04-01 21:04       ` Suresh Siddha
2010-04-02  6:20         ` Mike Galbraith
2010-04-02 17:05           ` Suresh Siddha
2010-04-02 19:43             ` Mike Galbraith
2010-04-14 20:45           ` Suresh Siddha
2010-04-15  5:17             ` Mike Galbraith
2010-04-20  8:46     ` Peter Zijlstra
2010-04-20  8:55       ` Peter Zijlstra
2010-04-20 17:03         ` Suresh Siddha
2010-04-23 10:50     ` [tip:sched/core] sched: Fix select_idle_sibling() logic in select_task_rq_fair() tip-bot for Suresh Siddha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100308221946.932207084@sbs-t61.sc.intel.com \
    --to=suresh.b.siddha@intel.com \
    --cc=a.p.zijlstra@chello.nl \
    --cc=arjan@linux.jf.intel.com \
    --cc=efault@gmx.de \
    --cc=ego@in.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=svaidy@linux.vnet.ibm.com \
    --cc=yanmin_zhang@linux.jf.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®