From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] input: Add support of Synaptics Clickpad device
Date: Mon, 19 Apr 2010 01:32:22 -0700 [thread overview]
Message-ID: <20100419083221.GB26102@core.coreip.homeip.net> (raw)
In-Reply-To: <1271257823-23566-2-git-send-email-tiwai@suse.de>
Hi Takashi,
On Wed, Apr 14, 2010 at 05:10:22PM +0200, Takashi Iwai wrote:
> Add the detection of Synaptics Clickpad device.
> The device can be detected a new query command 0x0c. The clickpad
> flags are in cap[0]:4 and cap[1]:0 bits. But, the driver checks
> first the product id bits in the ext capabilities to be sure, so
> that it skips the new check on older devices.
>
Instead of looking at the product id, can we check the number of
supported extended capabilities queries and act accordingly, like the
patch below?
Thanks.
--
Dmitry
Input: Add support of Synaptics Clickpad device
From: Takashi Iwai <tiwai@suse.de>
The new type of touchpads can be detected via a new query command 0x0c.
The clickpad flags are in cap[0]:4 and cap[1]:0 bits.
When the device is detected, the driver now reports only the left
button as the supported buttons so that X11 driver can detect that
the device is Clickpad. A Clickpad device gives the button events
only as the middle button. The kernel driver morphs to the left
button. The real handling of Clickpad is done rather in X driver
side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/mouse/synaptics.c | 33 +++++++++++++++++++++++++++++----
drivers/input/mouse/synaptics.h | 4 ++++
2 files changed, 33 insertions(+), 4 deletions(-)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 026df60..c7b5285 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -137,7 +137,8 @@ static int synaptics_capability(struct psmouse *psmouse)
if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap))
return -1;
priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
- priv->ext_cap = 0;
+ priv->ext_cap = priv->ext_cap_0c = 0;
+
if (!SYN_CAP_VALID(priv->capabilities))
return -1;
@@ -162,6 +163,16 @@ static int synaptics_capability(struct psmouse *psmouse)
priv->ext_cap &= 0xff0fff;
}
}
+
+ if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
+ if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
+ printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
+ " but I'm not able to read it.");
+ } else {
+ priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
+ }
+ }
+
return 0;
}
@@ -348,7 +359,15 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
+ if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ /*
+ * Clickpad's button is transmitted as middle button,
+ * however, since it is primary button, we will report
+ * it as BTN_LEFT.
+ */
+ hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
+
+ } else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
if (hw->w == 2)
hw->scroll = (signed char)(buf[1]);
@@ -593,6 +612,12 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
dev->absres[ABS_X] = priv->x_res;
dev->absres[ABS_Y] = priv->y_res;
+
+ if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ /* Clickpads report only left button */
+ __clear_bit(BTN_RIGHT, dev->keybit);
+ __clear_bit(BTN_MIDDLE, dev->keybit);
+ }
}
static void synaptics_disconnect(struct psmouse *psmouse)
@@ -697,10 +722,10 @@ int synaptics_init(struct psmouse *psmouse)
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
- printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n",
+ printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
SYN_ID_MODEL(priv->identity),
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
- priv->model_id, priv->capabilities, priv->ext_cap);
+ priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
set_input_params(psmouse->dev, priv);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index f0f40a3..ae37c5d 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -18,6 +18,7 @@
#define SYN_QUE_SERIAL_NUMBER_SUFFIX 0x07
#define SYN_QUE_RESOLUTION 0x08
#define SYN_QUE_EXT_CAPAB 0x09
+#define SYN_QUE_EXT_CAPAB_0C 0x0c
/* synatics modes */
#define SYN_BIT_ABSOLUTE_MODE (1 << 7)
@@ -48,6 +49,8 @@
#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
+#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
+#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
@@ -96,6 +99,7 @@ struct synaptics_data {
unsigned long int model_id; /* Model-ID */
unsigned long int capabilities; /* Capabilities */
unsigned long int ext_cap; /* Extended Capabilities */
+ unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */
unsigned long int identity; /* Identification */
int x_res; /* X resolution in units/mm */
int y_res; /* Y resolution in units/mm */
next prev parent reply other threads:[~2010-04-19 8:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-14 15:10 [PATCH 0/2] Synaptics Clickpad support Takashi Iwai
2010-04-14 15:10 ` [PATCH 1/2] input: Add support of Synaptics Clickpad device Takashi Iwai
2010-04-19 8:32 ` Dmitry Torokhov [this message]
2010-04-19 10:29 ` Takashi Iwai
2010-04-21 5:44 ` Dmitry Torokhov
2010-04-21 6:32 ` Takashi Iwai
2010-04-14 15:10 ` [PATCH 2/2] input: Add LED support to Synaptics device Takashi Iwai
2010-04-15 19:12 ` Pavel Machek
2010-04-16 5:29 ` Dmitry Torokhov
2010-04-16 8:00 ` Takashi Iwai
2010-04-19 10:44 ` Takashi Iwai
2010-04-21 5:43 ` Dmitry Torokhov
2010-04-21 6:31 ` Takashi Iwai
2010-04-21 6:39 ` Dmitry Torokhov
2010-04-21 7:15 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100419083221.GB26102@core.coreip.homeip.net \
--to=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®