system locks up when CD burn fails

system locks up when CD burn fails

[david]

I have a couple hundred boxes running kernels from 2.6.12 through 2.6.33.3 
that each burn a backup to a IDE CD-ROM once a week. Every couple of 
months one of the boxes (_not_ the same one each time) runs into some sort 
of error when burning the CD and the entire box locks up (unable to toggle 
numlock even). I have not been able to find any correlation between 
failures and anything on the system.

when the system locks up it doesn't log anything, and the screen just 
freezes in the middle of the cdrecord status (X of Y MB written) with no 
error message.

I'm actually not worried that much about the burn failing, The problem is 
that the burn failing will take out the entire system. Is there anything 
that I should be doing to make the systems more robust in the face of such 
failures?

David Lang

Re: system locks up when CD burn fails

[Borislav Petkov]

From: david@lang.hm
Date: Wed, May 12, 2010 at 03:35:06PM -0700

> I have a couple hundred boxes running kernels from 2.6.12 through
> 2.6.33.3 that each burn a backup to a IDE CD-ROM once a week. Every
> couple of months one of the boxes (_not_ the same one each time)
> runs into some sort of error when burning the CD and the entire box
> locks up (unable to toggle numlock even). I have not been able to
> find any correlation between failures and anything on the system.
> 
> when the system locks up it doesn't log anything, and the screen
> just freezes in the middle of the cdrecord status (X of Y MB
> written) with no error message.
> 
> I'm actually not worried that much about the burn failing, The
> problem is that the burn failing will take out the entire system. Is
> there anything that I should be doing to make the systems more
> robust in the face of such failures?

Are you using the ide drivers or libata? If it is the first, try
switching to libata to see whether this fixes your freezes.

-- 
Regards/Gruss,
    Boris.

Re: system locks up when CD burn fails

[david]

On Thu, 13 May 2010, Borislav Petkov wrote:

> From: david@lang.hm
> Date: Wed, May 12, 2010 at 03:35:06PM -0700
>
>> I have a couple hundred boxes running kernels from 2.6.12 through
>> 2.6.33.3 that each burn a backup to a IDE CD-ROM once a week. Every
>> couple of months one of the boxes (_not_ the same one each time)
>> runs into some sort of error when burning the CD and the entire box
>> locks up (unable to toggle numlock even). I have not been able to
>> find any correlation between failures and anything on the system.
>>
>> when the system locks up it doesn't log anything, and the screen
>> just freezes in the middle of the cdrecord status (X of Y MB
>> written) with no error message.
>>
>> I'm actually not worried that much about the burn failing, The
>> problem is that the burn failing will take out the entire system. Is
>> there anything that I should be doing to make the systems more
>> robust in the face of such failures?
>
> Are you using the ide drivers or libata? If it is the first, try
> switching to libata to see whether this fixes your freezes.

most of the boxes are using the ide drivers. Unfortunantly the problem is 
very intermittent (every few thousand disks burned I get a problem)

I'm upgrading them all to 2.6.33.3 with the libata drivers within the next 
few days, so we'll see what happens over the next couple of months.

David Lang