[PATCH v2] x86, HPET: mark HPET PCI BARs as IORESOURCE_PCI_FIXED

[PATCH v2] x86, HPET: mark HPET PCI BARs as IORESOURCE_PCI_FIXED

[Bjorn Helgaas]

We often discover the HPET early, via the static ACPI HPET table, before
enumerating PCI devices.  If the HPET is implemented as a PCI function,
we will discover it again during PCI device enumeration.  We must make
sure we never move the PCI function out from under the driver.

Doing this for *any* PCI BAR that matches a previously discovered HPET
should be more generic than the previous ATI-specific quirk.

This is for a regression from 2.6.34, but the reporter has been unable
to test it yet.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=18482
Reported-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
---

 arch/x86/kernel/quirks.c |   19 +++++++++++++++++++
 arch/x86/pci/fixup.c     |   28 ----------------------------
 2 files changed, 19 insertions(+), 28 deletions(-)


diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 939b9e9..9510f53 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -507,6 +507,25 @@ static void force_disable_hpet_msi(struct pci_dev *unused)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
 			 force_disable_hpet_msi);
 
+static void quirk_pci_hpet(struct pci_dev *dev)
+{
+	int i;
+
+	if (!hpet_address)
+		return;
+
+	for (i = 0; i < 6; i++) {
+		struct resource *res = &dev->resource[i];
+
+		if (resource_type(res) == IORESOURCE_MEM &&
+		    res->start == hpet_address) {
+			dev_info(&dev->dev, "BAR %d: %pR is an HPET we found earlier; making it immovable\n",
+				 i, res);
+			res->flags |= IORESOURCE_PCI_FIXED;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_pci_hpet);
 #endif
 
 #if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 6dd8955..08eba69 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -493,31 +493,3 @@ static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
 			  pci_siemens_interrupt_controller);
-
-/*
- * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
- * confusing the PCI engine:
- */
-static void sb600_disable_hpet_bar(struct pci_dev *dev)
-{
-	u8 val;
-
-	/*
-	 * The SB600 and SB700 both share the same device
-	 * ID, but the PM register 0x55 does something different
-	 * for the SB700, so make sure we are dealing with the
-	 * SB600 before touching the bit:
-	 */
-
-	pci_read_config_byte(dev, 0x08, &val);
-
-	if (val < 0x2F) {
-		outb(0x55, 0xCD6);
-		val = inb(0xCD7);
-
-		/* Set bit 7 in PM register 0x55 */
-		outb(0x55, 0xCD6);
-		outb(val | 0x80, 0xCD7);
-	}
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);

Re: [PATCH v2] x86, HPET: mark HPET PCI BARs as IORESOURCE_PCI_FIXED

[Bjorn Helgaas]

On Tuesday, October 05, 2010 10:13:26 am Bjorn Helgaas wrote:
> We often discover the HPET early, via the static ACPI HPET table, before
> enumerating PCI devices.  If the HPET is implemented as a PCI function,
> we will discover it again during PCI device enumeration.  We must make
> sure we never move the PCI function out from under the driver.
> 
> Doing this for *any* PCI BAR that matches a previously discovered HPET
> should be more generic than the previous ATI-specific quirk.
> 
> This is for a regression from 2.6.34, but the reporter has been unable
> to test it yet.

Since I don't have any way to test this, and it is an old regression,
I'd like to get it in -next and get some runtime on it.

> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=18482
> Reported-by: Simon Arlott <simon@fire.lp0.eu>
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
> ---
> 
>  arch/x86/kernel/quirks.c |   19 +++++++++++++++++++
>  arch/x86/pci/fixup.c     |   28 ----------------------------
>  2 files changed, 19 insertions(+), 28 deletions(-)
> 
> 
> diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
> index 939b9e9..9510f53 100644
> --- a/arch/x86/kernel/quirks.c
> +++ b/arch/x86/kernel/quirks.c
> @@ -507,6 +507,25 @@ static void force_disable_hpet_msi(struct pci_dev *unused)
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
>  			 force_disable_hpet_msi);
>  
> +static void quirk_pci_hpet(struct pci_dev *dev)
> +{
> +	int i;
> +
> +	if (!hpet_address)
> +		return;
> +
> +	for (i = 0; i < 6; i++) {
> +		struct resource *res = &dev->resource[i];
> +
> +		if (resource_type(res) == IORESOURCE_MEM &&
> +		    res->start == hpet_address) {
> +			dev_info(&dev->dev, "BAR %d: %pR is an HPET we found earlier; making it immovable\n",
> +				 i, res);
> +			res->flags |= IORESOURCE_PCI_FIXED;
> +		}
> +	}
> +}
> +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_pci_hpet);
>  #endif
>  
>  #if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
> diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
> index 6dd8955..08eba69 100644
> --- a/arch/x86/pci/fixup.c
> +++ b/arch/x86/pci/fixup.c
> @@ -493,31 +493,3 @@ static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev)
>  }
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015,
>  			  pci_siemens_interrupt_controller);
> -
> -/*
> - * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
> - * confusing the PCI engine:
> - */
> -static void sb600_disable_hpet_bar(struct pci_dev *dev)
> -{
> -	u8 val;
> -
> -	/*
> -	 * The SB600 and SB700 both share the same device
> -	 * ID, but the PM register 0x55 does something different
> -	 * for the SB700, so make sure we are dealing with the
> -	 * SB600 before touching the bit:
> -	 */
> -
> -	pci_read_config_byte(dev, 0x08, &val);
> -
> -	if (val < 0x2F) {
> -		outb(0x55, 0xCD6);
> -		val = inb(0xCD7);
> -
> -		/* Set bit 7 in PM register 0x55 */
> -		outb(0x55, 0xCD6);
> -		outb(val | 0x80, 0xCD7);
> -	}
> -}
> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
> 
>