* [PATCH v3 1/5] msm: Secure Channel Manager (SCM) support
2010-12-13 1:20 [PATCH 0/5 v3] SMP support for msm ykaoua
@ 2010-12-13 1:20 ` ykaoua
2010-12-13 1:20 ` [PATCH v3 2/5] msm: scm-boot: Support for setting cold/warm boot addresses ykaoua
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: ykaoua @ 2010-12-13 1:20 UTC (permalink / raw)
To: David Brown, Daniel Walker
Cc: linux-arm-msm, linux-arm-kernel, linux-kernel, Stephen Boyd,
Brian Swetland, Dima Zavin, Arve Hj�nnev�g,
David Brown, Daniel Walker, Bryan Huntsman, Russell King
From: Stephen Boyd <sboyd@codeaurora.org>
SCM is the protocol used to communicate between the secure and
non-secure code executing on the applications processor. The
non-secure side uses a physically contiguous buffer to pass
information to the secure side; where the buffer conforms to a
format that is agreed upon by both sides. The use of a buffer
allows multiple pending requests to be in flight on the secure
side. It also benefits use cases where the command or response
buffer contains large chunks of data.
Reviewed-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/mach-msm/Kconfig | 4 +
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/scm.c | 287 ++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-msm/scm.h | 41 +++++++
4 files changed, 333 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/scm.c
create mode 100644 arch/arm/mach-msm/scm.h
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 31e5fd6..ab5338f 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -44,6 +44,7 @@ config ARCH_MSM8X60
select CPU_V7
select MSM_V2_TLMM
select MSM_GPIOMUX
+ select MSM_SCM if SMP
endchoice
@@ -164,4 +165,7 @@ config MSM_GPIOMUX
config MSM_V2_TLMM
bool
+
+config MSM_SCM
+ bool
endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index b5a7b07..eed503b 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
+obj-$(CONFIG_MSM_SCM) += scm.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
new file mode 100644
index 0000000..f4b9bc9
--- /dev/null
+++ b/arch/arm/mach-msm/scm.c
@@ -0,0 +1,287 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/cacheflush.h>
+
+#include "scm.h"
+
+/* Cache line size for msm8x60 */
+#define CACHELINESIZE 32
+
+#define SCM_ENOMEM -5
+#define SCM_EOPNOTSUPP -4
+#define SCM_EINVAL_ADDR -3
+#define SCM_EINVAL_ARG -2
+#define SCM_ERROR -1
+#define SCM_INTERRUPTED 1
+
+static DEFINE_MUTEX(scm_lock);
+
+/**
+ * struct scm_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from scm_get_command_buffer()
+ *
+ * An SCM command is layed out in memory as follows:
+ *
+ * ------------------- <--- struct scm_command
+ * | command header |
+ * ------------------- <--- scm_get_command_buffer()
+ * | command buffer |
+ * ------------------- <--- struct scm_response and
+ * | response header | scm_command_to_response()
+ * ------------------- <--- scm_get_response_buffer()
+ * | response buffer |
+ * -------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate scm_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct scm_command {
+ u32 len;
+ u32 buf_offset;
+ u32 resp_hdr_offset;
+ u32 id;
+ u32 buf[0];
+};
+
+/**
+ * struct scm_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of scm_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct scm_response {
+ u32 len;
+ u32 buf_offset;
+ u32 is_complete;
+};
+
+/**
+ * alloc_scm_command() - Allocate an SCM command
+ * @cmd_size: size of the command buffer
+ * @resp_size: size of the response buffer
+ *
+ * Allocate an SCM command, including enough room for the command
+ * and response headers as well as the command and response buffers.
+ *
+ * Returns a valid &scm_command on success or %NULL if the allocation fails.
+ */
+static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
+{
+ struct scm_command *cmd;
+ size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
+ resp_size;
+
+ cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
+ if (cmd) {
+ cmd->len = len;
+ cmd->buf_offset = offsetof(struct scm_command, buf);
+ cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
+ }
+ return cmd;
+}
+
+/**
+ * free_scm_command() - Free an SCM command
+ * @cmd: command to free
+ *
+ * Free an SCM command.
+ */
+static inline void free_scm_command(struct scm_command *cmd)
+{
+ kfree(cmd);
+}
+
+/**
+ * scm_command_to_response() - Get a pointer to a scm_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct scm_response *scm_command_to_response(
+ const struct scm_command *cmd)
+{
+ return (void *)cmd + cmd->resp_hdr_offset;
+}
+
+/**
+ * scm_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *scm_get_command_buffer(const struct scm_command *cmd)
+{
+ return (void *)cmd->buf;
+}
+
+/**
+ * scm_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *scm_get_response_buffer(const struct scm_response *rsp)
+{
+ return (void *)rsp + rsp->buf_offset;
+}
+
+static int scm_remap_error(int err)
+{
+ switch (err) {
+ case SCM_ERROR:
+ return -EIO;
+ case SCM_EINVAL_ADDR:
+ case SCM_EINVAL_ARG:
+ return -EINVAL;
+ case SCM_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case SCM_ENOMEM:
+ return -ENOMEM;
+ }
+ return -EINVAL;
+}
+
+static u32 smc(u32 cmd_addr)
+{
+ int context_id;
+ register u32 r0 asm("r0") = 1;
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = cmd_addr;
+ asm(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2)
+ : "r3");
+ return r0;
+}
+
+static int __scm_call(const struct scm_command *cmd)
+{
+ int ret;
+ u32 cmd_addr = virt_to_phys(cmd);
+
+ /*
+ * Flush the entire cache here so callers don't have to remember
+ * to flush the cache when passing physical addresses to the secure
+ * side in the buffer.
+ */
+ flush_cache_all();
+ do {
+ ret = smc(cmd_addr);
+ if (ret < 0) {
+ ret = scm_remap_error(ret);
+ break;
+ }
+ } while (ret == SCM_INTERRUPTED);
+
+ return ret;
+}
+
+/**
+ * scm_call() - Send an SCM command
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @cmd_buf: command buffer
+ * @cmd_len: length of the command buffer
+ * @resp_buf: response buffer
+ * @resp_len: length of the response buffer
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ */
+int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
+ void *resp_buf, size_t resp_len)
+{
+ int ret;
+ struct scm_command *cmd;
+ struct scm_response *rsp;
+
+ cmd = alloc_scm_command(cmd_len, resp_len);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->id = (svc_id << 10) | cmd_id;
+ if (cmd_buf)
+ memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+
+ mutex_lock(&scm_lock);
+ ret = __scm_call(cmd);
+ mutex_unlock(&scm_lock);
+ if (ret)
+ goto out;
+
+ rsp = scm_command_to_response(cmd);
+ do {
+ u32 start = (u32)rsp;
+ u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
+ start &= ~(CACHELINESIZE - 1);
+ while (start < end) {
+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
+ : "memory");
+ start += CACHELINESIZE;
+ }
+ } while (!rsp->is_complete);
+
+ if (resp_buf)
+ memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
+out:
+ free_scm_command(cmd);
+ return ret;
+}
+EXPORT_SYMBOL(scm_call);
+
+u32 scm_get_version(void)
+{
+ int context_id;
+ static u32 version = -1;
+ register u32 r0 asm("r0") = 0x1 << 8;
+ register u32 r1 asm("r1") = (u32)&context_id;
+
+ if (version != -1)
+ return version;
+
+ mutex_lock(&scm_lock);
+ asm(
+ __asmeq("%0", "r1")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r1)
+ : "r" (r0), "r" (r1)
+ : "r2", "r3");
+ version = r1;
+ mutex_unlock(&scm_lock);
+
+ return version;
+}
+EXPORT_SYMBOL(scm_get_version);
diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-msm/scm.h
new file mode 100644
index 0000000..261786b
--- /dev/null
+++ b/arch/arm/mach-msm/scm.h
@@ -0,0 +1,41 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __MACH_SCM_H
+#define __MACH_SCM_H
+
+#define SCM_SVC_BOOT 0x1
+#define SCM_SVC_PIL 0x2
+
+extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
+ void *resp_buf, size_t resp_len);
+
+#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
+
+extern u32 scm_get_version(void);
+
+#endif
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v3 2/5] msm: scm-boot: Support for setting cold/warm boot addresses
2010-12-13 1:20 [PATCH 0/5 v3] SMP support for msm ykaoua
2010-12-13 1:20 ` [PATCH v3 1/5] msm: Secure Channel Manager (SCM) support ykaoua
@ 2010-12-13 1:20 ` ykaoua
2010-12-13 1:20 ` [PATCH v3 3/5] msm: timer: SMP timer support for msm ykaoua
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: ykaoua @ 2010-12-13 1:20 UTC (permalink / raw)
To: David Brown, Daniel Walker
Cc: linux-arm-msm, linux-arm-kernel, linux-kernel,
Stepan Moskovchenko, Brian Swetland, Dima Zavin,
Arve Hj�nnev�g, David Brown, Daniel Walker,
Bryan Huntsman, Russell King
From: Stepan Moskovchenko <stepanm@codeaurora.org>
Add support for setting the cold boot address of core 1 and
the warm boot addresses of cores 0 and 1 using a secure
domain call.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
---
arch/arm/mach-msm/Makefile | 2 +-
arch/arm/mach-msm/scm-boot.c | 39 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-msm/scm-boot.h | 38 ++++++++++++++++++++++++++++++++++++++
3 files changed, 78 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-msm/scm-boot.c
create mode 100644 arch/arm/mach-msm/scm-boot.h
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index eed503b..34cd0a8 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o
+obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-msm/scm-boot.c
new file mode 100644
index 0000000..5671d58
--- /dev/null
+++ b/arch/arm/mach-msm/scm-boot.c
@@ -0,0 +1,39 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "scm.h"
+#include "scm-boot.h"
+
+/*
+ * Set the cold/warm boot address for one of the CPU cores.
+ */
+int scm_set_boot_addr(void *addr, int flags)
+{
+ struct {
+ unsigned int flags;
+ void *addr;
+ } cmd;
+
+ cmd.addr = addr;
+ cmd.flags = flags;
+ return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
+ &cmd, sizeof(cmd), NULL, 0);
+}
+EXPORT_SYMBOL(scm_set_boot_addr);
diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-msm/scm-boot.h
new file mode 100644
index 0000000..fdc1374
--- /dev/null
+++ b/arch/arm/mach-msm/scm-boot.h
@@ -0,0 +1,38 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __MACH_SCM_BOOT_H
+#define __MACH_SCM_BOOT_H
+
+#define SCM_BOOT_ADDR 0x1
+#define SCM_FLAG_COLDBOOT_CPU1 0x1
+#define SCM_FLAG_WARMBOOT_CPU1 0x2
+#define SCM_FLAG_WARMBOOT_CPU0 0x4
+
+int scm_set_boot_addr(void *addr, int flags);
+
+#endif
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v3 3/5] msm: timer: SMP timer support for msm
2010-12-13 1:20 [PATCH 0/5 v3] SMP support for msm ykaoua
2010-12-13 1:20 ` [PATCH v3 1/5] msm: Secure Channel Manager (SCM) support ykaoua
2010-12-13 1:20 ` [PATCH v3 2/5] msm: scm-boot: Support for setting cold/warm boot addresses ykaoua
@ 2010-12-13 1:20 ` ykaoua
2010-12-13 1:20 ` [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm ykaoua
` (3 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: ykaoua @ 2010-12-13 1:20 UTC (permalink / raw)
To: David Brown, Daniel Walker
Cc: linux-arm-msm, linux-arm-kernel, linux-kernel, Jeff Ohlstein,
Brian Swetland, Dima Zavin, Arve Hj�nnev�g,
David Brown, Daniel Walker, Bryan Huntsman, Russell King,
Stepan Moskovchenko, Gregory Bean, Steve Muckle
From: Jeff Ohlstein <johlstei@codeaurora.org>
The msm provides timer hardware that is private to each core. Each
timer has separate counter and match registers, so we create separate
clock_event_devices for each core. For the global clocksource, use
cpu 0's counter.
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
---
arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 6 +-
arch/arm/mach-msm/io.c | 1 +
arch/arm/mach-msm/timer.c | 137 +++++++++++++++++++----
3 files changed, 120 insertions(+), 24 deletions(-)
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 45bab50..873e0b7 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -60,7 +60,11 @@
#define MSM_TMR_BASE IOMEM(0xF0200000)
#define MSM_TMR_PHYS 0x02000000
-#define MSM_TMR_SIZE (SZ_1M)
+#define MSM_TMR_SIZE SZ_4K
+
+#define MSM_TMR0_BASE IOMEM(0xF0201000)
+#define MSM_TMR0_PHYS 0x02040000
+#define MSM_TMR0_SIZE SZ_4K
#define MSM_GPT_BASE (MSM_TMR_BASE + 0x4)
#define MSM_DGT_BASE (MSM_TMR_BASE + 0x24)
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index d36b610..b826b6b 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -105,6 +105,7 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
MSM_DEVICE(QGIC_DIST),
MSM_DEVICE(QGIC_CPU),
MSM_DEVICE(TMR),
+ MSM_DEVICE(TMR0),
MSM_DEVICE(ACC),
MSM_DEVICE(GCC),
};
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 950100f..65d8da0 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -47,6 +47,19 @@ enum {
#define GPT_HZ 32768
+enum timer_location {
+ LOCAL_TIMER = 0,
+ GLOBAL_TIMER = 1,
+};
+
+#ifdef MSM_TMR0_BASE
+#define MSM_TMR_GLOBAL (MSM_TMR0_BASE - MSM_TMR_BASE)
+#else
+#define MSM_TMR_GLOBAL 0
+#endif
+
+#define MSM_GLOBAL_TIMER MSM_CLOCK_DGT
+
#if defined(CONFIG_ARCH_QSD8X50)
#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
#define MSM_DGT_SHIFT (0)
@@ -65,49 +78,67 @@ struct msm_clock {
void __iomem *regbase;
uint32_t freq;
uint32_t shift;
+ void __iomem *global_counter;
+ void __iomem *local_counter;
};
+enum {
+ MSM_CLOCK_GPT,
+ MSM_CLOCK_DGT,
+ NR_TIMERS,
+};
+
+
+static struct msm_clock msm_clocks[];
+static struct clock_event_device *local_clock_event;
+
static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
+ if (smp_processor_id() != 0)
+ evt = local_clock_event;
+ if (evt->event_handler == NULL)
+ return IRQ_HANDLED;
evt->event_handler(evt);
return IRQ_HANDLED;
}
-static cycle_t msm_gpt_read(struct clocksource *cs)
+static cycle_t msm_read_timer_count(struct clocksource *cs)
{
- return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
+ struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource);
+
+ return readl(clk->global_counter);
}
-static cycle_t msm_dgt_read(struct clocksource *cs)
+static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt)
{
- return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
+#ifdef CONFIG_SMP
+ int i;
+ for (i = 0; i < NR_TIMERS; i++)
+ if (evt == &(msm_clocks[i].clockevent))
+ return &msm_clocks[i];
+ return &msm_clocks[MSM_GLOBAL_TIMER];
+#else
+ return container_of(evt, struct msm_clock, clockevent);
+#endif
}
static int msm_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent);
- uint32_t now = readl(clock->regbase + TIMER_COUNT_VAL);
+ struct msm_clock *clock = clockevent_to_clock(evt);
+ uint32_t now = readl(clock->local_counter);
uint32_t alarm = now + (cycles << clock->shift);
- int late;
writel(alarm, clock->regbase + TIMER_MATCH_VAL);
- now = readl(clock->regbase + TIMER_COUNT_VAL);
- late = now - alarm;
- if (late >= (-2 << clock->shift) && late < DGT_HZ*5) {
- printk(KERN_NOTICE "msm_timer_set_next_event(%lu) clock %s, "
- "alarm already expired, now %x, alarm %x, late %d\n",
- cycles, clock->clockevent.name, now, alarm, late);
- return -ETIME;
- }
return 0;
}
static void msm_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent);
+ struct msm_clock *clock = clockevent_to_clock(evt);
+
switch (mode) {
case CLOCK_EVT_MODE_RESUME:
case CLOCK_EVT_MODE_PERIODIC:
@@ -123,7 +154,7 @@ static void msm_timer_set_mode(enum clock_event_mode mode,
}
static struct msm_clock msm_clocks[] = {
- {
+ [MSM_CLOCK_GPT] = {
.clockevent = {
.name = "gp_timer",
.features = CLOCK_EVT_FEAT_ONESHOT,
@@ -135,7 +166,7 @@ static struct msm_clock msm_clocks[] = {
.clocksource = {
.name = "gp_timer",
.rating = 200,
- .read = msm_gpt_read,
+ .read = msm_read_timer_count,
.mask = CLOCKSOURCE_MASK(32),
.shift = 17,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -148,9 +179,12 @@ static struct msm_clock msm_clocks[] = {
.irq = INT_GP_TIMER_EXP
},
.regbase = MSM_GPT_BASE,
- .freq = GPT_HZ
+ .freq = GPT_HZ,
+ .local_counter = MSM_GPT_BASE + TIMER_COUNT_VAL,
+ .global_counter = MSM_GPT_BASE + TIMER_COUNT_VAL +
+ MSM_TMR_GLOBAL,
},
- {
+ [MSM_CLOCK_DGT] = {
.clockevent = {
.name = "dg_timer",
.features = CLOCK_EVT_FEAT_ONESHOT,
@@ -162,7 +196,7 @@ static struct msm_clock msm_clocks[] = {
.clocksource = {
.name = "dg_timer",
.rating = 300,
- .read = msm_dgt_read,
+ .read = msm_read_timer_count,
.mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
.shift = 24 - MSM_DGT_SHIFT,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -176,7 +210,10 @@ static struct msm_clock msm_clocks[] = {
},
.regbase = MSM_DGT_BASE,
.freq = DGT_HZ >> MSM_DGT_SHIFT,
- .shift = MSM_DGT_SHIFT
+ .shift = MSM_DGT_SHIFT,
+ .local_counter = MSM_DGT_BASE + TIMER_COUNT_VAL,
+ .global_counter = MSM_DGT_BASE + TIMER_COUNT_VAL +
+ MSM_TMR_GLOBAL,
}
};
@@ -185,7 +222,7 @@ static void __init msm_timer_init(void)
int i;
int res;
-#ifdef CONFIG_ARCH_MSM8X60
+#ifdef CONFIG_ARCH_MSM_SCORPIONMP
writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
#endif
@@ -220,6 +257,60 @@ static void __init msm_timer_init(void)
}
}
+#ifdef CONFIG_SMP
+void local_timer_setup(struct clock_event_device *evt)
+{
+ unsigned long flags;
+ struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER];
+
+ /* Use existing clock_event for cpu 0 */
+ if (!smp_processor_id())
+ return;
+
+ writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
+
+ if (!local_clock_event) {
+ writel(0, clock->regbase + TIMER_ENABLE);
+ writel(0, clock->regbase + TIMER_CLEAR);
+ writel(~0, clock->regbase + TIMER_MATCH_VAL);
+ }
+ evt->irq = clock->irq.irq;
+ evt->name = "local_timer";
+ evt->features = CLOCK_EVT_FEAT_ONESHOT;
+ evt->rating = clock->clockevent.rating;
+ evt->set_mode = msm_timer_set_mode;
+ evt->set_next_event = msm_timer_set_next_event;
+ evt->shift = clock->clockevent.shift;
+ evt->mult = div_sc(clock->freq, NSEC_PER_SEC, evt->shift);
+ evt->max_delta_ns =
+ clockevent_delta2ns(0xf0000000 >> clock->shift, evt);
+ evt->min_delta_ns = clockevent_delta2ns(4, evt);
+
+ local_clock_event = evt;
+
+ local_irq_save(flags);
+ get_irq_chip(clock->irq.irq)->unmask(clock->irq.irq);
+ local_irq_restore(flags);
+
+ clockevents_register_device(evt);
+}
+
+inline int local_timer_ack(void)
+{
+ return 1;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void __cpuexit local_timer_stop(void)
+{
+ struct msm_clock *clock = clockevent_to_clock(local_clock_event);
+ writel(0, clock->regbase + TIMER_MATCH_VAL);
+ writel(0, clock->regbase + TIMER_ENABLE);
+ get_irq_chip(local_clock_event->irq)->mask(local_clock_event->irq);
+}
+#endif
+#endif
+
struct sys_timer msm_timer = {
.init = msm_timer_init
};
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm
2010-12-13 1:20 [PATCH 0/5 v3] SMP support for msm ykaoua
` (2 preceding siblings ...)
2010-12-13 1:20 ` [PATCH v3 3/5] msm: timer: SMP timer support for msm ykaoua
@ 2010-12-13 1:20 ` ykaoua
2010-12-13 1:20 ` [PATCH v3 5/5] msm: add SMP support for msm ykaoua
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: ykaoua @ 2010-12-13 1:20 UTC (permalink / raw)
To: David Brown, Daniel Walker
Cc: linux-arm-msm, linux-arm-kernel, linux-kernel, Jeff Ohlstein,
Brian Swetland, Dima Zavin, Arve Hj�nnev�g,
David Brown, Daniel Walker, Bryan Huntsman, Russell King
From: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
---
arch/arm/mach-msm/Makefile | 2 +
arch/arm/mach-msm/hotplug.c | 88 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 90 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/hotplug.c
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 34cd0a8..7a11b4a 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -20,6 +20,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
new file mode 100644
index 0000000..087da2d
--- /dev/null
+++ b/arch/arm/mach-msm/hotplug.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+#include <linux/irq.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/smp.h>
+
+static inline void cpu_enter_lowpower(void)
+{
+ flush_cache_all();
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ pen_release = -1;
+ smp_wmb();
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+ /* Just enter wfe for now. */
+ for (;;) {
+ asm("wfe");
+ if (pen_release == cpu) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+ smp_rmb();
+
+ /*
+ * getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * The trouble is, letting people know about this is not really
+ * possible, since we are currently running incoherently, and
+ * therefore cannot safely call printk() or anything else
+ */
+ pr_debug("CPU%u: spurious wakeup call\n", cpu);
+ }
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ /*
+ * we're ready for shutdown now, so do it
+ */
+ cpu_enter_lowpower();
+ platform_do_lowpower(cpu);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ cpu_leave_lowpower();
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v3 5/5] msm: add SMP support for msm
2010-12-13 1:20 [PATCH 0/5 v3] SMP support for msm ykaoua
` (3 preceding siblings ...)
2010-12-13 1:20 ` [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm ykaoua
@ 2010-12-13 1:20 ` ykaoua
[not found] ` <-1357135968697415881@unknownmsgid>
2010-12-13 16:35 ` [PATCH 0/5 v3] SMP support for msm David Brown
6 siblings, 0 replies; 9+ messages in thread
From: ykaoua @ 2010-12-13 1:20 UTC (permalink / raw)
To: David Brown, Daniel Walker
Cc: linux-arm-msm, linux-arm-kernel, linux-kernel, Jeff Ohlstein,
Brian Swetland, Dima Zavin, Arve Hj�nnev�g,
David Brown, Daniel Walker, Bryan Huntsman, Russell King,
Steve Muckle, Catalin Marinas
From: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
---
arch/arm/mach-msm/Kconfig | 1 +
arch/arm/mach-msm/Makefile | 1 +
arch/arm/mach-msm/headsmp.S | 43 ++++++++++++
arch/arm/mach-msm/include/mach/smp.h | 2 +
arch/arm/mach-msm/platsmp.c | 123 ++++++++++++++++++++++++++++++++++
5 files changed, 170 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/headsmp.S
create mode 100644 arch/arm/mach-msm/platsmp.c
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ab5338f..8c57425 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -40,6 +40,7 @@ config ARCH_MSM8X60
bool "MSM8X60"
select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
&& !MACH_MSM8X60_FFA)
+ select ARCH_MSM_SCORPIONMP
select ARM_GIC
select CPU_V7
select MSM_V2_TLMM
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 7a11b4a..1945f9c 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
new file mode 100644
index 0000000..438cfeb
--- /dev/null
+++ b/arch/arm/mach-msm/headsmp.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/*
+ * MSM specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ *
+ * This is executing in physical space with cache's off.
+ */
+ENTRY(msm_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5 @ MPIDR
+ and r0, r0, #15 @ What CPU am I
+ adr r4, 1f @ address of
+ ldmia r4, {r5, r6} @ load curr addr and pen_rel addr
+ sub r4, r4, r5 @ determine virtual/phys offsets
+ add r6, r6, r4 @ apply
+pen:
+ wfe
+ dsb @ ensure subsequent access is
+ @ after event
+
+ ldr r7, [r6] @ pen_rel has cpu to remove from reset
+ cmp r7, r0 @ are we lucky?
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long pen_release
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
index a95f7b9..6caadfe 100644
--- a/arch/arm/mach-msm/include/mach/smp.h
+++ b/arch/arm/mach-msm/include/mach/smp.h
@@ -36,4 +36,6 @@ static inline void smp_cross_call(const struct cpumask *mask, int ipi)
gic_raise_softirq(mask, ipi);
}
+extern int pen_release;
+extern void msm_secondary_startup(void);
#endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
new file mode 100644
index 0000000..a94d586
--- /dev/null
+++ b/arch/arm/mach-msm/platsmp.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+
+#include <mach/smp.h>
+#include <mach/msm_iomap.h>
+
+#include "scm-boot.h"
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
+#define SCSS_CPU1CORE_RESET 0xD80
+#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
+
+int pen_release = -1;
+
+/* Initialize the present map (set_cpu_present(i, true)). */
+void platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+}
+
+void smp_init_cpus(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CPUS; i++)
+ set_cpu_possible(i, true);
+}
+
+static void prepare_cold_cpu(unsigned int cpu)
+{
+ int ret;
+ ret = scm_set_boot_addr((void *)
+ virt_to_phys(msm_secondary_startup),
+ SCM_FLAG_COLDBOOT_CPU1);
+ if (ret == 0) {
+ void *sc1_base_ptr;
+ sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
+ if (sc1_base_ptr) {
+ writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+ writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
+ writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
+ iounmap(sc1_base_ptr);
+ }
+ } else
+ printk(KERN_DEBUG "Failed to set secondary core boot "
+ "address\n");
+}
+
+/* Executed by primary CPU, brings other CPUs out of reset. Called at boot
+ as well as when a CPU is coming out of shutdown induced by echo 0 >
+ /sys/devices/.../cpuX.
+*/
+int boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ static int cold_boot_done;
+ unsigned long timeout;
+ printk(KERN_DEBUG "Starting secondary CPU %d\n", cpu);
+
+ if (cold_boot_done == false) {
+ prepare_cold_cpu(cpu);
+ cold_boot_done = true;
+ }
+
+ pen_release = cpu;
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+ /* Use smp_cross_call() to send a soft interrupt to wake up
+ * the other core.
+ */
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ return 0;
+}
+
+/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
+#define GIC_PPI_EDGE_MASK 0xFFFFD7FF
+
+/* Initialization routine for secondary CPUs after they are brought out of
+ * reset.
+*/
+void platform_secondary_init(unsigned int cpu)
+{
+ printk(KERN_DEBUG "%s: cpu:%d\n", __func__, cpu);
+
+ writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
+
+ /*
+ * setup GIC (GIC number NOT CPU number and the base address of the
+ * GIC CPU interface
+ */
+ gic_secondary_init(0);
+ pen_release = -1;
+ smp_wmb();
+}
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 9+ messages in thread[parent not found: <-1357135968697415881@unknownmsgid>]
* Re: [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm
[not found] ` <-1357135968697415881@unknownmsgid>
@ 2010-12-13 15:12 ` Catalin Marinas
2010-12-13 16:53 ` Catalin Marinas
0 siblings, 1 reply; 9+ messages in thread
From: Catalin Marinas @ 2010-12-13 15:12 UTC (permalink / raw)
To: ykaoua
Cc: David Brown, Daniel Walker, linux-arm-msm, linux-arm-kernel,
linux-kernel, Jeff Ohlstein, Brian Swetland, Dima Zavin,
Arve Hjønnevåg, Bryan Huntsman, Russell King
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 806 bytes --]
On 13 December 2010 01:20, <ykaoua@qualcomm.com> wrote:
> --- /dev/null
> +++ b/arch/arm/mach-msm/hotplug.c
[...]
> +static inline void platform_do_lowpower(unsigned int cpu)
> +{
> + Â Â Â /* Just enter wfe for now. */
> + Â Â Â for (;;) {
> + Â Â Â Â Â Â Â asm("wfe");
> + Â Â Â Â Â Â Â if (pen_release == cpu) {
> + Â Â Â Â Â Â Â Â Â Â Â /*
> + Â Â Â Â Â Â Â Â Â Â Â Â * OK, proper wakeup, we're done
> + Â Â Â Â Â Â Â Â Â Â Â Â */
> + Â Â Â Â Â Â Â Â Â Â Â break;
> + Â Â Â Â Â Â Â }
> + Â Â Â Â Â Â Â smp_rmb();
Do you need some barrier after wfe?
--
Catalin
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm
2010-12-13 15:12 ` [PATCH v3 4/5] msm: hotplug: support cpu hotplug on msm Catalin Marinas
@ 2010-12-13 16:53 ` Catalin Marinas
0 siblings, 0 replies; 9+ messages in thread
From: Catalin Marinas @ 2010-12-13 16:53 UTC (permalink / raw)
To: ykaoua
Cc: David Brown, Daniel Walker, linux-arm-msm, linux-arm-kernel,
linux-kernel, Jeff Ohlstein, Brian Swetland, Dima Zavin,
Arve Hjønnevåg, Bryan Huntsman, Russell King
On 13 December 2010 15:12, Catalin Marinas <catalin.marinas@arm.com> wrote:
> On 13 December 2010 01:20, <ykaoua@qualcomm.com> wrote:
>> --- /dev/null
>> +++ b/arch/arm/mach-msm/hotplug.c
> [...]
>> +static inline void platform_do_lowpower(unsigned int cpu)
>> +{
>> + /* Just enter wfe for now. */
>> + for (;;) {
>> + asm("wfe");
>> + if (pen_release == cpu) {
>> + /*
>> + * OK, proper wakeup, we're done
>> + */
>> + break;
>> + }
>> + smp_rmb();
>
> Do you need some barrier after wfe?
I checked with the hw people and it looks like we don't need a DSB
after an WFE (as you have in headsmp.S) since the hardware doesn't
speculate the loads beyond the WFE (lower power state). But in the
above case you may need some compiler barrier to avoid code
reordering.
--
Catalin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 0/5 v3] SMP support for msm
2010-12-13 1:20 [PATCH 0/5 v3] SMP support for msm ykaoua
` (5 preceding siblings ...)
[not found] ` <-1357135968697415881@unknownmsgid>
@ 2010-12-13 16:35 ` David Brown
6 siblings, 0 replies; 9+ messages in thread
From: David Brown @ 2010-12-13 16:35 UTC (permalink / raw)
To: ykaoua, Jeff Ohlstein
Cc: David Brown, Daniel Walker, linux-arm-msm, linux-arm-kernel,
linux-kernel, Jeff Ohlstein, Brian Swetland, Dima Zavin,
Arve Hj�nnev�g
On Sun, Dec 12, 2010 at 05:20:15PM -0800, ykaoua@qualcomm.com wrote:
> From: Jeff Ohlstein <johlstei@codeaurora.org>
>
> This series adds support for SMP on msm targets, and specifically adds
> support for SMP on the msm8x60. This version is rebased on top of
> Russell's SMP and gic patches, and doesn't need to change dma-mapping.
Heh. These are supposed to be from Jeff Ohlstein, not ykaoua. Jeff,
when you incorporate fixes, please make sure the series gets sent from
your address.
Yvonne, apologies that you'll be getting all of the replies to this
thread, please ignore them.
As far as I can tell, what happened is that 'git send-email' asks to
confirm the email address. It's not a question, so if you type 'y',
it happily sends the email from 'y', which in our case expands to the
ykaoua user.
David
^ permalink raw reply [flat|nested] 9+ messages in thread