From: Felipe Balbi <balbi@ti.com>
To: Felipe Balbi <balbi@ti.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
Tony Lindgren <tony@atomide.com>,
David Brownell <david-b@pacbell.net>,
Thomas Gleixner <tglx@linutronix.de>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: Re: [RFC/PATCH 0/3] TWL4030 IRQ Changes
Date: Tue, 28 Dec 2010 19:36:04 +0200 [thread overview]
Message-ID: <20101228173604.GH2239@legolas.emea.dhcp.ti.com> (raw)
In-Reply-To: <1293556459-28613-1-git-send-email-balbi@ti.com>
Hi,
On Tue, Dec 28, 2010 at 07:14:16PM +0200, Felipe Balbi wrote:
>I dropped the twl6030-irq.c changes because that
>thing is a bit messy. I hope the original author
>will feel inspired and fix that one up.
>
>Anyway, twl4030-irq.c seems to be going to the
>right direction now. Thanks to Mark Brown for
>pointing out the need to drop the locking and
>implement bus_lock/bus_sync_unlock methods.
>
>Compile tested only with omap2plus_defconfig.
>
>I'll test after merge window to be sure I have
>all the newest code.
when we finally move to struct irq_data, the below could
be used. BTW, Thomas do you have any plans for exposing
irq_data_to_desc() ?
8<------------------------------ cut here --------------------------------------
From 6069e3ddb34608fef0cb3dca3e544fca8deb3840 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Tue, 28 Dec 2010 19:33:22 +0200
Subject: [PATCH] mfd: twl4030-irq: switch to new methods
Organization: Texas Instruments\n
Move everybody to struct irq_data-based
methods.
NYET-Signed-off-by: Felipe Balbi <balbi@ti.com>
---
drivers/mfd/twl4030-irq.c | 86 ++++++++++++++++++++++++++++++++-------------
1 files changed, 61 insertions(+), 25 deletions(-)
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index ff7bb93..ad6197c 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -447,10 +447,14 @@ struct sih_agent {
/*----------------------------------------------------------------------*/
-static void twl4030_sih_mask(unsigned irq)
+/* REVISIT define it here until IRQ Subsystem exports its implementation */
+#define irq_data_to_desc(data) container_of(data, struct irq_desc, irq_data)
+
+static void twl4030_sih_mask(struct irq_data *data)
{
- struct sih_agent *agent = get_irq_chip_data(irq);
- const struct sih *sih = agent->sih;
+ struct irq_desc *d = irq_data_to_desc(data);
+ struct sih_agent *agent;
+ const struct sih *sih;
union {
u8 bytes[4];
@@ -458,7 +462,13 @@ static void twl4030_sih_mask(unsigned irq)
} imr;
int status;
+ int irq = data->irq;
+ if (!d)
+ return;
+
+ agent = d->chip_data;
+ sih = agent->sih;
agent->imr |= BIT(irq - agent->irq_base);
/* byte[0] gets overwritten as we write ... */
@@ -472,10 +482,11 @@ static void twl4030_sih_mask(unsigned irq)
"write", status);
}
-static void twl4030_sih_unmask(unsigned irq)
+static void twl4030_sih_unmask(struct irq_data *data)
{
- struct sih_agent *agent = get_irq_chip_data(irq);
- const struct sih *sih = agent->sih;
+ struct irq_desc *d = irq_data_to_desc(data);
+ struct sih_agent *agent;
+ const struct sih *sih;
union {
u8 bytes[4];
@@ -483,7 +494,13 @@ static void twl4030_sih_unmask(unsigned irq)
} imr;
int status;
+ int irq = data->irq;
+
+ if (!d)
+ return;
+ agent = d->chip_data;
+ sih = agent->sih;
agent->imr &= ~BIT(irq - agent->irq_base);
/* byte[0] gets overwritten as we write ... */
@@ -497,14 +514,15 @@ static void twl4030_sih_unmask(unsigned irq)
"write", status);
}
-static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
+static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
{
- struct sih_agent *agent = get_irq_chip_data(irq);
- const struct sih *sih = agent->sih;
- struct irq_desc *desc = irq_to_desc(irq);
+ struct irq_desc *d = irq_data_to_desc(data);
+ struct sih_agent *agent;
+ const struct sih *sih;
int status = 0;
+ int irq = data->irq;
- if (!desc) {
+ if (!d) {
pr_err("twl4030: Invalid IRQ: %d\n", irq);
return -EINVAL;
}
@@ -512,12 +530,15 @@ static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
- if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) {
+ agent = d->chip_data;
+ sih = agent->sih;
+
+ if ((d->status & IRQ_TYPE_SENSE_MASK) != trigger) {
u8 bytes[6];
u32 edge_change;
- desc->status &= ~IRQ_TYPE_SENSE_MASK;
- desc->status |= trigger;
+ d->status &= ~IRQ_TYPE_SENSE_MASK;
+ d->status |= trigger;
agent->edge_change |= BIT(irq - agent->irq_base);
edge_change = agent->edge_change;
@@ -537,7 +558,6 @@ static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
/* Modify only the bits we know must change */
while (edge_change) {
int i = fls(edge_change) - 1;
- struct irq_desc *d = irq_to_desc(i + agent->irq_base);
int byte = 1 + (i >> 2);
int off = (i & 0x3) * 2;
@@ -570,27 +590,43 @@ static int twl4030_sih_set_type(unsigned irq, unsigned trigger)
return status;
}
-static void twl4030_sih_bus_lock(unsigned int irq)
+static void twl4030_sih_bus_lock(struct irq_data *data)
{
- struct sih_agent *agent = get_irq_chip_data(irq);
+ struct irq_desc *d = irq_data_to_desc(data);
+ struct sih_agent *agent;
+ int irq = data->irq;
+
+ if (!d) {
+ pr_err("twl4030: Invalid IRQ: %d\n", irq);
+ return;
+ }
+ agent = d->chip_data;
mutex_lock(&agent->irq_lock);
}
-static void twl4030_sih_bus_sync_unlock(unsigned int irq)
+static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
{
- struct sih_agent *agent = get_irq_chip_data(irq);
+ struct irq_desc *d = irq_data_to_desc(data);
+ struct sih_agent *agent;
+ int irq = data->irq;
+
+ if (!d) {
+ pr_err("twl4030: Invalid IRQ: %d\n", irq);
+ return;
+ }
+ agent = d->chip_data;
mutex_unlock(&agent->irq_lock);
}
static struct irq_chip twl4030_sih_irq_chip = {
- .name = "twl4030",
- .mask = twl4030_sih_mask,
- .unmask = twl4030_sih_unmask,
- .set_type = twl4030_sih_set_type,
- .bus_lock = twl4030_sih_bus_lock,
- .bus_sync_unlock = twl4030_sih_bus_sync_unlock,
+ .name = "twl4030",
+ .irq_mask = twl4030_sih_mask,
+ .irq_unmask = twl4030_sih_unmask,
+ .irq_set_type = twl4030_sih_set_type,
+ .irq_bus_lock = twl4030_sih_bus_lock,
+ .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
};
/*----------------------------------------------------------------------*/
--
1.7.3.4.598.g85356
--
balbi
next prev parent reply other threads:[~2010-12-28 17:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-28 13:59 [RFC/PATCH 0/2] Move twl*-irq.c to threaded_irq infrastructure Felipe Balbi
2010-12-28 13:59 ` [RFC/PATCH 1/2] mfd: twl6030-irq: move to threaded_irq Felipe Balbi
2010-12-28 15:46 ` Mark Brown
2010-12-28 16:16 ` Felipe Balbi
2010-12-28 17:14 ` [RFC/PATCH 0/3] TWL4030 IRQ Changes Felipe Balbi
2010-12-28 17:14 ` [RFC/PATCH 1/3] mfd: twl4030-irq: move to threaded_irq Felipe Balbi
2010-12-28 17:14 ` [RFC/PATCH 2/3] mfd: twl4030-irq: drop the workqueue hackery Felipe Balbi
2010-12-28 17:14 ` [RFC/PATCH 3/3] mfd: twl4030-irq: implement bus_*lock Felipe Balbi
2010-12-28 23:58 ` Mark Brown
2010-12-29 0:38 ` Felipe Balbi
2010-12-29 12:28 ` Felipe Balbi
2010-12-30 12:18 ` Mark Brown
2010-12-30 12:26 ` Felipe Balbi
2010-12-28 17:36 ` Felipe Balbi [this message]
2010-12-28 17:41 ` [RFC/PATCH 0/3] TWL4030 IRQ Changes Mark Brown
2010-12-29 0:39 ` Felipe Balbi
2010-12-28 17:40 ` [RFC/PATCH 1/2] mfd: twl6030-irq: move to threaded_irq David Brownell
2010-12-28 17:45 ` Mark Brown
2010-12-28 13:59 ` [RFC/PATCH 2/2] mfd: twl4030-irq: " Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101228173604.GH2239@legolas.emea.dhcp.ti.com \
--to=balbi@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=david-b@pacbell.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®