From: Mike Travis <travis@sgi.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Len Brown <len.brown@intel.com>,
Yinghai Lu <yhlu.kernel@gmail.com>,
linux-acpi@vger.kernel.org, x86@kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 5/5] printk: Allocate kernel log buffer earlier
Date: Thu, 17 Feb 2011 12:51:36 -0600 [thread overview]
Message-ID: <20110217185132.735139933@gulag1.americas.sgi.com> (raw)
In-Reply-To: <20110217185131.960038922@gulag1.americas.sgi.com>
[-- Attachment #1: get_log_buff_early --]
[-- Type: text/plain, Size: 4338 bytes --]
On larger systems, because of the numerous ACPI, Bootmem and EFI
messages, the static log buffer overflows before the larger one
specified by the log_buf_len param is allocated. Minimize the
overflow by allocating the new log buffer as soon as possible.
All arch's are covered by the "setup_log_buf" in start_kernel().
The x86 arch allocates it right after bootmem is created.
v1: Added pertinent __init & __initdata specifiers.
v2: updated to apply to x86-tip
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Jack Steiner <steiner@sgi.com>
Reviewed-by: Robin Holt <holt@sgi.com>
---
arch/x86/kernel/setup.c | 5 ++
include/linux/printk.h | 4 ++
init/main.c | 1
kernel/printk.c | 81 +++++++++++++++++++++++++++++-------------------
4 files changed, 60 insertions(+), 31 deletions(-)
--- linux.orig/arch/x86/kernel/setup.c
+++ linux/arch/x86/kernel/setup.c
@@ -1007,6 +1007,11 @@ void __init setup_arch(char **cmdline_p)
memblock_find_dma_reserve();
dma32_reserve_bootmem();
+ /*
+ * Allocate bigger log buffer as early as possible
+ */
+ setup_log_buf();
+
#ifdef CONFIG_KVM_CLOCK
kvmclock_init();
#endif
--- linux.orig/include/linux/printk.h
+++ linux/include/linux/printk.h
@@ -1,6 +1,8 @@
#ifndef __KERNEL_PRINTK__
#define __KERNEL_PRINTK__
+#include <linux/init.h>
+
extern const char linux_banner[];
extern const char linux_proc_banner[];
@@ -89,6 +91,8 @@ int no_printk(const char *fmt, ...)
extern asmlinkage __attribute__ ((format (printf, 1, 2)))
void early_printk(const char *fmt, ...);
+void __init setup_log_buf(void);
+
extern int printk_needs_cpu(int cpu);
extern void printk_tick(void);
--- linux.orig/init/main.c
+++ linux/init/main.c
@@ -592,6 +592,7 @@ asmlinkage void __init start_kernel(void
* These use large bootmem allocations and must precede
* kmem_cache_init()
*/
+ setup_log_buf();
pidhash_init();
vfs_caches_init_early();
sort_main_extable();
--- linux.orig/kernel/printk.c
+++ linux/kernel/printk.c
@@ -162,46 +162,65 @@ void log_buf_kexec_setup(void)
}
#endif
+static unsigned long __initdata new_log_buf_len;
static int __init log_buf_len_setup(char *str)
{
unsigned size = memparse(str, &str);
- unsigned long flags;
if (size)
size = roundup_pow_of_two(size);
- if (size > log_buf_len) {
- unsigned start, dest_idx, offset;
- char *new_log_buf;
-
- new_log_buf = alloc_bootmem(size);
- if (!new_log_buf) {
- printk(KERN_WARNING "log_buf_len: allocation failed\n");
- goto out;
- }
-
- spin_lock_irqsave(&logbuf_lock, flags);
- log_buf_len = size;
- log_buf = new_log_buf;
-
- offset = start = min(con_start, log_start);
- dest_idx = 0;
- while (start != log_end) {
- log_buf[dest_idx] = __log_buf[start & (__LOG_BUF_LEN - 1)];
- start++;
- dest_idx++;
- }
- log_start -= offset;
- con_start -= offset;
- log_end -= offset;
- spin_unlock_irqrestore(&logbuf_lock, flags);
+ if (size > log_buf_len)
+ new_log_buf_len = size;
- printk(KERN_NOTICE "log_buf_len: %d\n", log_buf_len);
- }
-out:
- return 1;
+ return 0;
}
+early_param("log_buf_len", log_buf_len_setup);
-__setup("log_buf_len=", log_buf_len_setup);
+void __init setup_log_buf(void)
+{
+ unsigned long flags;
+ unsigned start, dest_idx, offset;
+ char *new_log_buf;
+ char first_line[64], *first_nl;
+
+ if (!new_log_buf_len)
+ return;
+
+ new_log_buf = alloc_bootmem(new_log_buf_len);
+ memset(first_line, 0, sizeof(first_line));
+
+ spin_lock_irqsave(&logbuf_lock, flags);
+ log_buf_len = new_log_buf_len;
+ log_buf = new_log_buf;
+ new_log_buf_len = 0;
+
+ offset = start = min(con_start, log_start);
+ dest_idx = 0;
+ while (start != log_end) {
+ unsigned log_idx_mask = start & (__LOG_BUF_LEN - 1);
+
+ log_buf[dest_idx] = __log_buf[log_idx_mask];
+ if (dest_idx < sizeof(first_line) - 1)
+ first_line[dest_idx] = __log_buf[log_idx_mask];
+ start++;
+ dest_idx++;
+ }
+ log_start -= offset;
+ con_start -= offset;
+ log_end -= offset;
+ spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ first_nl = strchr(first_line, '\n');
+ if (first_nl)
+ *first_nl = '\0';
+
+ pr_info("log_buf_len: %d, first line: %s\n",
+ log_buf_len, first_line);
+
+ pr_debug("bu: %d/%d (%d%%)\n",
+ dest_idx, __LOG_BUF_LEN - dest_idx,
+ (dest_idx * 100) / __LOG_BUF_LEN);
+}
#ifdef CONFIG_BOOT_PRINTK_DELAY
--
next prev parent reply other threads:[~2011-02-17 18:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-17 18:51 [PATCH 0/5] init: Shrink early messages to prevent overflowing the kernel log buffer Mike Travis
2011-02-17 18:51 ` [PATCH 1/5] ACPI: Minimize X2APIC initial messages Mike Travis
2011-02-18 7:28 ` Ingo Molnar
2011-02-17 18:51 ` [PATCH 2/5] x86: Minimize initial e820 messages Mike Travis
2011-02-18 7:30 ` Ingo Molnar
2011-02-17 18:51 ` [PATCH 3/5] x86: Minimize SRAT messages Mike Travis
2011-02-18 7:32 ` Ingo Molnar
2011-02-17 18:51 ` [PATCH 4/5] printk: Minimize time zero output Mike Travis
2011-02-18 7:34 ` Ingo Molnar
2011-02-17 18:51 ` Mike Travis [this message]
2011-02-17 23:21 ` [PATCH 5/5] printk: Allocate kernel log buffer earlier Yinghai Lu
2011-02-17 23:52 ` Mike Travis
2011-02-18 7:40 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110217185132.735139933@gulag1.americas.sgi.com \
--to=travis@sgi.com \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®