mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Peter Tyser <ptyser@xes-inc.com>
Cc: linux-kernel@vger.kernel.org, Alek Du <alek.du@intel.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	David Brownell <dbrownell@users.sourceforge.net>,
	Eric Miao <eric.y.miao@gmail.com>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Joe Perches <joe@perches.com>,
	Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Grant Likely <grant.likely@secretlab.ca>
Subject: Re: [PATCH v3 2/4] gpiolib: Add ability to get GPIO pin direction
Date: Fri, 18 Feb 2011 09:57:34 +0100	[thread overview]
Message-ID: <20110218085734.GX22310@pengutronix.de> (raw)
In-Reply-To: <1297983799-4747-2-git-send-email-ptyser@xes-inc.com>

On Thu, Feb 17, 2011 at 05:03:17PM -0600, Peter Tyser wrote:
> Add a new get_direction() function to the gpio_chip structure.  This is
> useful so that the direction of a pin can be determined when its
> initially exported.  Previously, the direction defaulted to "unknown"
> regardless of the actual configuration of the GPIO pin.
> 
> If a GPIO driver implements get_direction(), it is called in
> gpio_request() to set the initial direction of the pin accurately.
IMHO the commit log is conceptually wrong, because it talks about a
"pin".  Better use gpio here.

> Cc: Alek Du <alek.du@intel.com>
> Cc: Samuel Ortiz <sameo@linux.intel.com>
> Cc: David Brownell <dbrownell@users.sourceforge.net>
> Cc: Eric Miao <eric.y.miao@gmail.com>
> Cc: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Joe Perches <joe@perches.com>
> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
> ---
> Changes since v1:
> - Add support for "unknown" direction
> 
> Changes since v2:
>   Based on Wolfram's feedback:
> - Use GPIOF_DIR_* flags as returns from get_direction()
> - Call spin_lock_irqsave() to before setting flags
> 
>  drivers/gpio/gpiolib.c     |   23 +++++++++++++++++++++++
>  include/asm-generic/gpio.h |    4 ++++
>  2 files changed, 27 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index eb74311..a656a2c 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -1174,6 +1174,7 @@ int gpio_request(unsigned gpio, const char *label)
>  	struct gpio_desc	*desc;
>  	struct gpio_chip	*chip;
>  	int			status = -EINVAL;
> +	int			dir;
>  	unsigned long		flags;
>  
>  	spin_lock_irqsave(&gpio_lock, flags);
> @@ -1214,6 +1215,28 @@ int gpio_request(unsigned gpio, const char *label)
>  		}
>  	}
>  
> +	if (chip->get_direction) {
> +		/* chip->get_direction may sleep */
> +		spin_unlock_irqrestore(&gpio_lock, flags);
might_sleep_if(chip->can_sleep) ?

> +		dir = chip->get_direction(chip, gpio - chip->base);
> +		spin_lock_irqsave(&gpio_lock, flags);
> +		switch (dir) {
> +		case GPIOF_DIR_OUT:
> +			set_bit(FLAG_DIR_OUT, &desc->flags);
> +			clear_bit(FLAG_DIR_IN, &desc->flags);
> +			break;
> +		case GPIOF_DIR_IN:
> +			set_bit(FLAG_DIR_IN, &desc->flags);
> +			clear_bit(FLAG_DIR_OUT, &desc->flags);
> +			break;
> +		default:
> +			/* Direction isn't known */
> +			clear_bit(FLAG_DIR_OUT, &desc->flags);
> +			clear_bit(FLAG_DIR_IN, &desc->flags);
> +			break;
> +		}
Alternatively to my suggestion for patch1:
	} else {
		clear_bit(FLAG_DIR_OUT, &desc->flags);
		clear_bit(FLAG_DIR_IN, &desc->flags);
> +	}
> +
>  done:
>  	if (status)
>  		pr_debug("gpio_request: gpio-%d (%s) status %d\n",
> diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
> index ff5c660..6af5a3e 100644
> --- a/include/asm-generic/gpio.h
> +++ b/include/asm-generic/gpio.h
> @@ -57,6 +57,8 @@ struct device_node;
>   * @direction_input: configures signal "offset" as input, or returns error
>   * @get: returns value for signal "offset"; for output signals this
>   *	returns either the value actually sensed, or zero
> + * @get_direction: optional hook to determine if a GPIO signal is configured
> + *	as an input, output, or unknown
>   * @direction_output: configures signal "offset" as output, or returns error
>   * @set: assigns output value for signal "offset"
>   * @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
> @@ -101,6 +103,8 @@ struct gpio_chip {
>  						unsigned offset);
>  	int			(*get)(struct gpio_chip *chip,
>  						unsigned offset);
> +	int			(*get_direction)(struct gpio_chip *chip,
> +						unsigned offset);
>  	int			(*direction_output)(struct gpio_chip *chip,
>  						unsigned offset, int value);
>  	int			(*set_debounce)(struct gpio_chip *chip,
> -- 
> 1.7.0.4
> 
> 

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

  reply	other threads:[~2011-02-18  8:57 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-17 23:03 [PATCH v3 1/4] gpiolib: Add "unknown" direction support Peter Tyser
2011-02-17 23:03 ` [PATCH v3 2/4] gpiolib: Add ability to get GPIO pin direction Peter Tyser
2011-02-18  8:57   ` Uwe Kleine-König [this message]
2011-02-18 17:36     ` Peter Tyser
2011-02-18 18:49       ` Uwe Kleine-König
2011-02-18 20:27         ` Peter Tyser
2011-02-17 23:03 ` [PATCH v3 3/4] gpio: pca953x: Implement get_direction() hook Peter Tyser
2011-02-17 23:03 ` [PATCH v3 4/4] gpio: Add support for Intel ICHx/3100/Series[56] GPIO Peter Tyser
2011-02-18 17:58   ` Vincent Palatin
2011-02-18 20:28     ` Peter Tyser
2011-02-18  0:07 ` [PATCH v3 1/4] gpiolib: Add "unknown" direction support Ryan Mallon
2011-02-18  0:33   ` Peter Tyser
2011-02-18  8:51 ` Uwe Kleine-König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110218085734.GX22310@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=alek.du@intel.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dbrownell@users.sourceforge.net \
    --cc=eric.y.miao@gmail.com \
    --cc=grant.likely@secretlab.ca \
    --cc=joe@perches.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ptyser@xes-inc.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®