[PATCHv1 11/11] INPUT/MISC/ONKEY: OnKey module of DA9052 PMICs driver

[PATCHv1 11/11] INPUT/MISC/ONKEY: OnKey module of DA9052 PMICs driver

[Ashish Jangam]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 6107 bytes --]

Hi Dmitry,

ONKEY Driver for Dialog Semiconductor DA9052 PMICs.

Changes made since last submission:
. read and write operation moved to MFD
. added workqueue to notify onkey events

Some additional information of this patch:
. This patch is thoroughly tested with the Samsung 6410 board using I2C connectivity. 
. Workqueue is added to toggle the KEY_POWER event.

Linux Kernel Version: 2.6.37

Signed-off-by: D. Chen <dchen@diasemi.com>
---
diff -Naur orig_linux-2.6.37/drivers/input/misc/da9052_onkey.c linux-2.6.37/drivers/input/misc/da9052_onkey.c
--- orig_linux-2.6.37/drivers/input/misc/da9052_onkey.c	1970-01-01 05:00:00.000000000 +0500
+++ linux-2.6.37/drivers/input/misc/da9052_onkey.c	2011-03-31 19:28:59.000000000 +0500
@@ -0,0 +1,150 @@
+/*
+ * da9052_onkey.c  --  ON pin driver for Dialog DA9052 PMICs
+ *
+ * Copyright(c) 2009 Dialog Semiconductor Ltd.
+ *
+ * Author: Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+
+struct da9052_onkey {
+	struct da9052 *da9052;
+	struct input_dev *input;
+	struct delayed_work work;
+	int irq;
+};
+
+static void da9052_onkey_work(struct work_struct *work)
+{
+	unsigned int ret;
+	struct da9052_onkey *onkey;
+	onkey = container_of(work, struct da9052_onkey, work.work);
+
+	ret = da9052_reg_read(onkey->da9052, DA9052_EVENT_B_REG);
+	if (ret < 0) {
+		dev_err(onkey->da9052->dev,
+			"da9052_onkey_report_event da9052_reg_read error %d\n",
+			ret);
+		ret = 1;
+	} else {
+		ret = ret & DA9052_E_nONKEY;
+		input_report_key(onkey->input, KEY_POWER, ret);
+		input_sync(onkey->input);
+	}
+
+	if (ret)
+		schedule_delayed_work(&onkey->work, 10);
+
+}
+
+
+static irqreturn_t  da9052_onkey_irq(int irq, void *data)
+{
+	struct da9052_onkey *onkey = (struct da9052_onkey *) data;
+
+	schedule_delayed_work(&onkey->work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit da9052_onkey_probe(struct platform_device *pdev)
+{
+	struct da9052_onkey *onkey;
+	unsigned int ret;
+
+	onkey = kzalloc(sizeof(*onkey), GFP_KERNEL);
+	if (!onkey) {
+		dev_err(&pdev->dev, "Failed to allocate memory \n");
+		return -ENOMEM;
+	}
+	onkey->input = input_allocate_device();
+	if (!onkey->input) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "Failed to allocate input device, %d\n", ret);
+		goto err_mem;
+	}
+	onkey->da9052 = dev_get_drvdata(pdev->dev.parent);
+	onkey->irq = platform_get_irq_byname(pdev, "ONKEY");
+
+	onkey->input->evbit[0] = BIT_MASK(EV_KEY);
+	onkey->input->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+	onkey->input->name = "da9052-onkey";
+	onkey->input->phys = "da9052-onkey/input0";
+	onkey->input->dev.parent = &pdev->dev;
+
+	ret = input_register_device(onkey->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to register input\
+				device, %d\n", ret);
+		goto err_input;
+	}
+
+	INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work);
+
+	ret = da9052_request_irq(onkey->da9052, onkey->irq,
+					da9052_onkey_irq, "ONKEY", onkey);
+	if (ret < 0)
+		goto err_input;
+
+	platform_set_drvdata(pdev, onkey);
+
+	return 0;
+
+err_input:
+	input_unregister_device(onkey->input);
+	cancel_delayed_work_sync(&onkey->work);
+err_mem:
+	kfree(onkey);
+	return ret;
+}
+
+static int __devexit da9052_onkey_remove(struct platform_device *pdev)
+{
+	struct da9052_onkey *onkey = pdev->dev.platform_data;
+
+	cancel_delayed_work_sync(&onkey->work);
+	input_unregister_device(onkey->input);
+	da9052_free_irq(onkey->da9052, onkey->irq, NULL);
+	kfree(onkey);
+
+	return 0;
+}
+
+static struct platform_driver da9052_onkey_driver = {
+	.driver.name	= "da9052-onkey",
+	.driver.owner	= THIS_MODULE,
+	.probe		= da9052_onkey_probe,
+	.remove		= __devexit_p(da9052_onkey_remove),
+};
+
+static int __init da9052_onkey_init(void)
+{
+	return platform_driver_register(&da9052_onkey_driver);
+}
+
+static void __exit da9052_onkey_exit(void)
+{
+	platform_driver_unregister(&da9052_onkey_driver);
+}
+
+module_init(da9052_onkey_init);
+module_exit(da9052_onkey_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("Onkey driver for DA9052");
+MODULE_ALIAS("platform:da9052-onkey");
diff -Naur orig_linux-2.6.37/drivers/input/misc/Kconfig linux-2.6.37/drivers/input/misc/Kconfig
--- orig_linux-2.6.37/drivers/input/misc/Kconfig	2011-01-05 05:50:19.000000000 +0500
+++ linux-2.6.37/drivers/input/misc/Kconfig	2011-03-31 19:29:14.000000000 +0500
@@ -32,6 +32,16 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called ab8500-ponkey.

+config INPUT_DA9052_ONKEY
+	tristate "Dialog DA9052 Onkey"
+	depends on PMIC_DA9052
+	help
+	  Support the ONKEY of Dialog DA9052 PMICs as an input device
+	  reporting power button status.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called da9052_onkey.
+
 config INPUT_AD714X
 	tristate "Analog Devices AD714x Capacitance Touch Sensor"
 	help
diff -Naur orig_linux-2.6.37/drivers/input/misc/Makefile linux-2.6.37/drivers/input/misc/Makefile
--- orig_linux-2.6.37/drivers/input/misc/Makefile	2011-01-05 05:50:19.000000000 +0500
+++ linux-2.6.37/drivers/input/misc/Makefile	2011-03-31 19:29:21.000000000 +0500
@@ -5,6 +5,7 @@
 # Each configuration option enables a list of files.

 obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
+obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
 obj-$(CONFIG_INPUT_AB8500_PONKEY)	+= ab8500-ponkey.o
 obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
 obj-$(CONFIG_INPUT_AD714X_I2C)	+= ad714x-i2c.o



Regards,
Ashish


ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

Re: [PATCHv1 11/11] INPUT/MISC/ONKEY: OnKey module of DA9052 PMICs driver

[Dmitry Torokhov]

Hi Ashish,

On Wed, Apr 06, 2011 at 05:24:23PM +0530, Ashish Jangam wrote:
> Hi Dmitry,
> 
> ONKEY Driver for Dialog Semiconductor DA9052 PMICs.
> 
> Changes made since last submission:
> . read and write operation moved to MFD
> . added workqueue to notify onkey events
> 
> Some additional information of this patch:
> . This patch is thoroughly tested with the Samsung 6410 board using I2C connectivity. 
> . Workqueue is added to toggle the KEY_POWER event.
> 
> Linux Kernel Version: 2.6.37
> 
> Signed-off-by: D. Chen <dchen@diasemi.com>
> ---
> diff -Naur orig_linux-2.6.37/drivers/input/misc/da9052_onkey.c linux-2.6.37/drivers/input/misc/da9052_onkey.c
> --- orig_linux-2.6.37/drivers/input/misc/da9052_onkey.c	1970-01-01 05:00:00.000000000 +0500
> +++ linux-2.6.37/drivers/input/misc/da9052_onkey.c	2011-03-31 19:28:59.000000000 +0500
> @@ -0,0 +1,150 @@
> +/*
> + * da9052_onkey.c  --  ON pin driver for Dialog DA9052 PMICs

Please no filenames in comments.

> + *
> + * Copyright(c) 2009 Dialog Semiconductor Ltd.
> + *
> + * Author: Dajun Chen <dchen@diasemi.com>
> + *
> + *  This program is free software; you can redistribute  it and/or modify it
> + *  under  the terms of  the GNU General  Public License as published by the
> + *  Free Software Foundation;  either version 2 of the  License, or (at your
> + *  option) any later version.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/input.h>
> +#include <linux/workqueue.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/da9052/da9052.h>
> +#include <linux/mfd/da9052/reg.h>
> +
> +struct da9052_onkey {
> +	struct da9052 *da9052;
> +	struct input_dev *input;
> +	struct delayed_work work;
> +	int irq;
> +};
> +
> +static void da9052_onkey_work(struct work_struct *work)
> +{
> +	unsigned int ret;

No, not unsigned. Have you ried running it through sparse?

> +	struct da9052_onkey *onkey;
> +	onkey = container_of(work, struct da9052_onkey, work.work);
> +
> +	ret = da9052_reg_read(onkey->da9052, DA9052_EVENT_B_REG);
> +	if (ret < 0) {
> +		dev_err(onkey->da9052->dev,
> +			"da9052_onkey_report_event da9052_reg_read error %d\n",
> +			ret);
> +		ret = 1;
> +	} else {
> +		ret = ret & DA9052_E_nONKEY;
> +		input_report_key(onkey->input, KEY_POWER, ret);
> +		input_sync(onkey->input);
> +	}
> +
> +	if (ret)
> +		schedule_delayed_work(&onkey->work, 10);
> +
> +}
> +
> +
> +static irqreturn_t  da9052_onkey_irq(int irq, void *data)
> +{
> +	struct da9052_onkey *onkey = (struct da9052_onkey *) data;
> +
> +	schedule_delayed_work(&onkey->work, 0);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int __devinit da9052_onkey_probe(struct platform_device *pdev)
> +{
> +	struct da9052_onkey *onkey;
> +	unsigned int ret;

It can't be unsigned - error codes are negative. And call it 'error'
please.

> +
> +	onkey = kzalloc(sizeof(*onkey), GFP_KERNEL);
> +	if (!onkey) {
> +		dev_err(&pdev->dev, "Failed to allocate memory \n");
> +		return -ENOMEM;
> +	}
> +	onkey->input = input_allocate_device();
> +	if (!onkey->input) {
> +		ret = -ENOMEM;
> +		dev_err(&pdev->dev, "Failed to allocate input device, %d\n", ret);
> +		goto err_mem;
> +	}
> +	onkey->da9052 = dev_get_drvdata(pdev->dev.parent);
> +	onkey->irq = platform_get_irq_byname(pdev, "ONKEY");

Can it fail?

> +
> +	onkey->input->evbit[0] = BIT_MASK(EV_KEY);
> +	onkey->input->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
> +	onkey->input->name = "da9052-onkey";
> +	onkey->input->phys = "da9052-onkey/input0";
> +	onkey->input->dev.parent = &pdev->dev;
> +
> +	ret = input_register_device(onkey->input);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to register input\

Do not split the message, especially by escaping newline.

> +				device, %d\n", ret);
> +		goto err_input;
> +	}
> +
> +	INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work);
> +
> +	ret = da9052_request_irq(onkey->da9052, onkey->irq,
> +					da9052_onkey_irq, "ONKEY", onkey);
> +	if (ret < 0)
> +		goto err_input;
> +
> +	platform_set_drvdata(pdev, onkey);
> +
> +	return 0;
> +
> +err_input:
> +	input_unregister_device(onkey->input);

If input device was not registered you should be calling
input_free_device(). May I recommend registering input device last?

> +	cancel_delayed_work_sync(&onkey->work);
> +err_mem:
> +	kfree(onkey);
> +	return ret;
> +}
> +
> +static int __devexit da9052_onkey_remove(struct platform_device *pdev)
> +{
> +	struct da9052_onkey *onkey = pdev->dev.platform_data;

This should be platform_get_drvdata() which is different from
pdev->dev.platform_data which is conctant data maintained by vboard
code.

> +
> +	cancel_delayed_work_sync(&onkey->work);
> +	input_unregister_device(onkey->input);

If interrupt comes here you will crash. You need to free IRQ, then
cancel work and only then unregister the device.

> +	da9052_free_irq(onkey->da9052, onkey->irq, NULL);
> +	kfree(onkey);

platform_set_drvdata(pdev, NULL);

> +
> +	return 0;
> +}
> +
> +static struct platform_driver da9052_onkey_driver = {
> +	.driver.name	= "da9052-onkey",
> +	.driver.owner	= THIS_MODULE,
> +	.probe		= da9052_onkey_probe,
> +	.remove		= __devexit_p(da9052_onkey_remove),
> +};
> +
> +static int __init da9052_onkey_init(void)
> +{
> +	return platform_driver_register(&da9052_onkey_driver);
> +}
> +
> +static void __exit da9052_onkey_exit(void)
> +{
> +	platform_driver_unregister(&da9052_onkey_driver);
> +}
> +
> +module_init(da9052_onkey_init);
> +module_exit(da9052_onkey_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
> +MODULE_DESCRIPTION("Onkey driver for DA9052");
> +MODULE_ALIAS("platform:da9052-onkey");
> diff -Naur orig_linux-2.6.37/drivers/input/misc/Kconfig linux-2.6.37/drivers/input/misc/Kconfig
> --- orig_linux-2.6.37/drivers/input/misc/Kconfig	2011-01-05 05:50:19.000000000 +0500
> +++ linux-2.6.37/drivers/input/misc/Kconfig	2011-03-31 19:29:14.000000000 +0500
> @@ -32,6 +32,16 @@
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called ab8500-ponkey.
> 
> +config INPUT_DA9052_ONKEY
> +	tristate "Dialog DA9052 Onkey"
> +	depends on PMIC_DA9052
> +	help
> +	  Support the ONKEY of Dialog DA9052 PMICs as an input device
> +	  reporting power button status.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called da9052_onkey.
> +
>  config INPUT_AD714X
>  	tristate "Analog Devices AD714x Capacitance Touch Sensor"
>  	help
> diff -Naur orig_linux-2.6.37/drivers/input/misc/Makefile linux-2.6.37/drivers/input/misc/Makefile
> --- orig_linux-2.6.37/drivers/input/misc/Makefile	2011-01-05 05:50:19.000000000 +0500
> +++ linux-2.6.37/drivers/input/misc/Makefile	2011-03-31 19:29:21.000000000 +0500
> @@ -5,6 +5,7 @@
>  # Each configuration option enables a list of files.
> 
>  obj-$(CONFIG_INPUT_88PM860X_ONKEY)	+= 88pm860x_onkey.o
> +obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o

Please keep the Makefile and Kconfig sorthed alphabetically.

>  obj-$(CONFIG_INPUT_AB8500_PONKEY)	+= ab8500-ponkey.o
>  obj-$(CONFIG_INPUT_AD714X)		+= ad714x.o
>  obj-$(CONFIG_INPUT_AD714X_I2C)	+= ad714x-i2c.o
> 

Thanks.

-- 
Dmitry

[PATCHv1 11/11] INPUT/MISC/ONKEY: OnKey module of DA9052 PMICs driver

[Ashish Jangam]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 6330 bytes --]

Hi Dmitry,

ONKEY Driver for Dialog Semiconductor DA9052 PMICs.

Changes made since last submission:
. made changes to error handling in probe function
. changed variable names to reflect their use
. Ported the driver to Linux kernel 2.6.38.2

Linux Kernel Version: 2.6.38.2

Signed-off-by: D. Chen <dchen@diasemi.com>
---
diff -Naur linux-2.6.38.2/drivers/input/misc/da9052_onkey.c wrk_linux-2.6.38.2/drivers/input/misc/da9052_onkey.c
--- linux-2.6.38.2/drivers/input/misc/da9052_onkey.c	1970-01-01 05:00:00.000000000 +0500
+++ wrk_linux-2.6.38.2/drivers/input/misc/da9052_onkey.c	2011-04-13 12:28:39.000000000 +0500
@@ -0,0 +1,165 @@
+/*
+ * ON pin driver for Dialog DA9052 PMICs
+ *
+ * Copyright(c) 2009 Dialog Semiconductor Ltd.
+ *
+ * Author: Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+
+struct da9052_onkey {
+	struct da9052 *da9052;
+	struct input_dev *input;
+	struct delayed_work work;
+	int irq;
+};
+
+static void da9052_onkey_work(struct work_struct *work)
+{
+	int ret;
+	struct da9052_onkey *onkey;
+	onkey = container_of(work, struct da9052_onkey, work.work);
+
+	ret = da9052_reg_read(onkey->da9052, DA9052_EVENT_B_REG);
+	if (ret < 0) {
+		dev_err(onkey->da9052->dev,
+			"da9052_onkey_report_event da9052_reg_read error %d\n",
+			ret);
+		ret = 1;
+	} else {
+		ret = ret & DA9052_E_nONKEY;
+		input_report_key(onkey->input, KEY_POWER, ret);
+		input_sync(onkey->input);
+	}
+
+	if (ret)
+		schedule_delayed_work(&onkey->work, 10);
+
+}
+
+static irqreturn_t da9052_onkey_irq(int irq, void *data)
+{
+	struct da9052_onkey *onkey = (struct da9052_onkey *) data;
+
+	schedule_delayed_work(&onkey->work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit da9052_onkey_probe(struct platform_device *pdev)
+{
+	struct da9052_onkey *onkey;
+	int error = 0;
+
+	onkey = kzalloc(sizeof(*onkey), GFP_KERNEL);
+	if (!onkey) {
+		dev_err(&pdev->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+	onkey->input = input_allocate_device();
+	if (!onkey->input) {
+		error = -ENOMEM;
+		dev_err(&pdev->dev, "Failed to allocate input device, %d\n",
+			error);
+		goto err_mem;
+	}
+	onkey->da9052 = dev_get_drvdata(pdev->dev.parent);
+	onkey->irq = platform_get_irq_byname(pdev, "ONKEY");
+	if (onkey->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get an IRQ for input device, %d\n",
+			onkey->irq);
+		goto err_mem;
+	}
+
+	onkey->input->evbit[0] = BIT_MASK(EV_KEY);
+	onkey->input->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+	onkey->input->name = "da9052-onkey";
+	onkey->input->phys = "da9052-onkey/input0";
+	onkey->input->dev.parent = &pdev->dev;
+
+	INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work);
+
+	error = request_threaded_irq(onkey->da9052->irq_base + onkey->irq, NULL,
+					da9052_onkey_irq,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					"ONKEY", onkey);
+	if (error < 0) {
+		dev_err(onkey->da9052->dev,
+			" Failed to register %s IRQ %d, error = %d\n",
+			"ONKEY", onkey->da9052->irq_base + onkey->irq, error);
+		goto err_input;
+	}
+
+	error = input_register_device(onkey->input);
+	if (error) {
+		dev_err(&pdev->dev, "Unable to register input device, %d\n",
+			error);
+		goto err_reg;
+	}
+
+	platform_set_drvdata(pdev, onkey);
+
+	return 0;
+
+err_reg:
+	free_irq(onkey->da9052->irq_base + onkey->irq, NULL);
+err_input:
+	cancel_delayed_work_sync(&onkey->work);
+err_mem:
+	input_free_device(onkey->input);
+	kfree(onkey);
+	return error;
+}
+
+static int __devexit da9052_onkey_remove(struct platform_device *pdev)
+{
+	struct da9052_onkey *onkey = platform_get_drvdata(pdev);
+
+	free_irq(onkey->da9052->irq_base + onkey->irq, NULL);
+	cancel_delayed_work_sync(&onkey->work);
+	input_unregister_device(onkey->input);
+	kfree(onkey);
+
+	return 0;
+}
+
+static struct platform_driver da9052_onkey_driver = {
+	.driver = {
+		.name	= "da9052-onkey",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= da9052_onkey_probe,
+	.remove		= __devexit_p(da9052_onkey_remove),
+};
+
+static int __init da9052_onkey_init(void)
+{
+	return platform_driver_register(&da9052_onkey_driver);
+}
+
+static void __exit da9052_onkey_exit(void)
+{
+	platform_driver_unregister(&da9052_onkey_driver);
+}
+
+module_init(da9052_onkey_init);
+module_exit(da9052_onkey_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("Onkey driver for DA9052");
diff -Naur linux-2.6.38.2/drivers/input/misc/Kconfig wrk_linux-2.6.38.2/drivers/input/misc/Kconfig
--- linux-2.6.38.2/drivers/input/misc/Kconfig	2011-03-27 23:37:20.000000000 +0500
+++ wrk_linux-2.6.38.2/drivers/input/misc/Kconfig	2011-04-13 12:28:53.000000000 +0500
@@ -353,6 +353,13 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called rb532_button.

+config INPUT_DA9052_ONKEY
+	tristate "Dialog DA9052 Onkey"
+	depends on PMIC_DA9052
+	help
+	  Support the ONKEY of Dialog DA9052 PMICs as an input device
+	  reporting power button status.
+
 config INPUT_DM355EVM
 	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
 	depends on MFD_DM355EVM_MSP
diff -Naur linux-2.6.38.2/drivers/input/misc/Makefile wrk_linux-2.6.38.2/drivers/input/misc/Makefile
--- linux-2.6.38.2/drivers/input/misc/Makefile	2011-03-27 23:37:20.000000000 +0500
+++ wrk_linux-2.6.38.2/drivers/input/misc/Makefile	2011-04-13 12:28:47.000000000 +0500
@@ -21,6 +21,7 @@
 obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
 obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
+obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o

Regards,
Ashish J


ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥