mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Michael Leun" <lkml20100708@newton.leun.net>
To: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>,
	linux-ide@vger.kernel.org,
	Linux PM mailing list <linux-pm@lists.linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: AHCI driver problem on ICH (Re: AHCI driver problem on SB700/SB800 w/ Acer Ferrari One)
Date: Fri, 13 May 2011 14:37:58 +0200	[thread overview]
Message-ID: <20110513143758.33f68a77@xenia.leun.net> (raw)
In-Reply-To: <201105120025.34531.rjw@sisk.pl>

On Thu, 12 May 2011 00:25:34 +0200
"Rafael J. Wysocki" <rjw@sisk.pl> wrote:

> There seems to be a problem on my Acer box which is related to DIPM
> and switching the power source.  Namely, when I detach the AC adapter
> from the machine, the disk (which is an Intel SSD) freezes for a
> while and something like this appears in dmesg:
[...]

Since updating to 2.6.39-rc7 (from 2.6.38.x) I have similar problems
with two notebooks using Intel ICH:

Acer PTZ1825
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI
Controller (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Acer
Incorporated [ALI] Device 0300 Flags: bus master, 66MHz, medium devsel,
latency 0, IRQ 42 I/O ports at 30e8 [size=8]
        I/O ports at 30fc [size=4]
        I/O ports at 30e0 [size=8]
        I/O ports at 30f8 [size=4]
        I/O ports at 3020 [size=32]
        Memory at d4504000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
        Capabilities: [70] Power Management version 3
        Capabilities: [a8] SATA HBA v1.0
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ahci


Dell Latitude E6510
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset
6 port SATA AHCI Cont roller (rev 05) (prog-if 01 [AHCI 1.0])
        Subsystem: Dell Device 040b
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 41
        I/O ports at 8090 [size=8]
        I/O ports at 8080 [size=4]
        I/O ports at 8070 [size=8]
        I/O ports at 8060 [size=4]
        I/O ports at 8020 [size=32]
        Memory at e9640000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [70] Power Management version 3
        Capabilities: [a8] SATA HBA v1.0
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ahci

Patch not tried yet (do not know / not looked into yet where to change
for this chipset).

Seems to be a 2.6.39-rcX regression?


-- 
MfG,

Michael Leun


  reply	other threads:[~2011-05-13 13:07 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-11 22:25 AHCI driver problem on SB700/SB800 w/ Acer Ferrari One Rafael J. Wysocki
2011-05-13 12:37 ` Michael Leun [this message]
2011-05-13 16:56   ` AHCI driver problem on ICH (Re: AHCI driver problem on SB700/SB800 w/ Acer Ferrari One) Rafael J. Wysocki
2011-05-13 17:39     ` Tejun Heo
2011-05-13 19:54       ` Michael Leun
2011-05-13 20:20         ` Rafael J. Wysocki
2011-05-13 20:22       ` Rafael J. Wysocki
2011-05-13 20:44         ` Rafael J. Wysocki
2011-05-14  2:08           ` Robert Hancock
2011-05-14 10:18           ` Tejun Heo
2011-05-14 10:28             ` [PATCH v2.6.38-rc7] Revert "libata: ahci_start_engine compliant to AHCI spec" Tejun Heo
2011-05-14 17:47               ` Linus Torvalds
2011-05-14 18:49                 ` Jeff Garzik
     [not found]               ` <BANLkTik1nFKX1Eyov_o0Xd0rr01Si5hSqA@mail.gmail.com>
2011-05-15  9:25                 ` Rafael J. Wysocki
2011-05-15 12:20                   ` Michael Leun
2011-05-16 17:02               ` Valdis.Kletnieks
     [not found]                 ` <BANLkTin7NgUMXSVyKn6P0TCrFZ5uaaRL1w@mail.gmail.com>
2011-05-18 19:44                   ` Rafael J. Wysocki
     [not found] ` <BANLkTimZ9pe-FhkJYHTG1Jx8MUPrMHSFbA@mail.gmail.com>
     [not found]   ` <BANLkTim9_1Xt8oE4awbCO1iKUW96YUOv_A@mail.gmail.com>
2011-05-19 10:19     ` Rafael J. Wysocki
     [not found]       ` <BANLkTin6+2obBm=+5Kd5Za1Lq-n4UQ-STw@mail.gmail.com>
2011-05-19 21:32         ` Rafael J. Wysocki
     [not found]           ` <BANLkTikR2E2vb=9_ftLS4pcq0ysje7Rqyg@mail.gmail.com>
2011-05-19 22:03             ` Rafael J. Wysocki
2011-05-20 15:40     ` Valdis.Kletnieks
2011-05-20 15:43       ` Tejun Heo
2011-05-20 18:21         ` Jian Peng
     [not found]         ` <BANLkTi=iNjWsaYCJqP057FkhAXtab5nS=Q@mail.gmail.com>
2011-05-20 18:25           ` Valdis.Kletnieks
2011-05-22  2:00             ` Jian Peng
2011-05-23 12:13           ` Tejun Heo
2011-05-24  1:04             ` Jian Peng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110513143758.33f68a77@xenia.leun.net \
    --to=lkml20100708@newton.leun.net \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=rjw@sisk.pl \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®