* Re: Kernel BUG after removing USB device [not found] <20110527174336.GA4410@untroubled.org> @ 2011-05-27 18:26 ` Alan Stern 2011-05-28 16:54 ` James Bottomley 0 siblings, 1 reply; 3+ messages in thread From: Alan Stern @ 2011-05-27 18:26 UTC (permalink / raw) To: Bruce Guenter Cc: James Bottomley, Jens Axboe, USB list, SCSI development list, Kernel development list Added a few entries to the CC: list. On Fri, 27 May 2011, Bruce Guenter wrote: > Hi. > > I have a repeatable kernel BUG happening after I remove either of my two > different Philips GoGear MP3 players. I have also seen what appeared to > be a similar BUG on insertion once, but the problem is definitely > repeatable on removal. After the BUG happens, the USB system is > generally unusable > > I'm running an unmodified 2.6.38.7 kernel on Gentoo Linux, amd64 mode. > The host controller is EHCI (ATI SB870). > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 > IP: [<ffffffff811d33c0>] elv_may_queue+0x10/0x20 > PGD 217164067 PUD 217221067 PMD 0 > Oops: 0000 [#1] SMP > last sysfs file: /sys/devices/pci0000:00/0000:00:13.2/class > CPU 1 > Modules linked in: nls_iso8859_1 nls_cp437 vfat fat f71882fg ipv6 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss btrfs zlib_deflate lzo_compress crc32c libcrc32c cryptd aes_x86_64 aes_generic xts gf128mul kvm_amd kvm oprofile cachefiles nfs lockd fscache auth_rpcgss sunrpc usbhid hid usblp usb_storage ohci_hcd snd_hda_codec_via ehci_hcd snd_hda_intel sg usbcore e1000 snd_hda_codec sr_mod snd_hwdep snd_pcm atl1c snd_timer evdev i2c_piix4 k10temp snd soundcore snd_page_alloc > > Pid: 4660, comm: blkid Not tainted 2.6.38.7 #40 MSI MS-7599/870-G45 (MS-7599) > RIP: 0010:[<ffffffff811d33c0>] [<ffffffff811d33c0>] elv_may_queue+0x10/0x20 > RSP: 0018:ffff88021461f818 EFLAGS: 00010097 > RAX: 0000000000000000 RBX: ffff88022d521ea0 RCX: 0000000000000010 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88022d521ea0 > RBP: ffff88021461f818 R08: 0000000000000008 R09: ffff880228006ea0 > R10: ffff88021461fa58 R11: ffff88022bbd6000 R12: 0000000000000000 > R13: 0000000000000001 R14: ffff88021461fa58 R15: ffff880228006ea0 > FS: 00007fc5246ae740(0000) GS:ffff8800cfc80000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 0000000000000078 CR3: 0000000216ca1000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process blkid (pid: 4660, threadinfo ffff88021461e000, task ffff88022bbbc100) > Stack: > ffff88021461f878 ffffffff811da17f ffff8800cfd11440 0000000000000082 > 0000000000000000 ffffffff00000010 0000000000000001 ffff88022d521ea0 > 0000000000000000 0000000000000010 ffff88021461fa58 ffff880228006ea0 > Call Trace: > [<ffffffff811da17f>] get_request+0x3f/0x3c0 > [<ffffffff811dae3a>] get_request_wait+0x2a/0x190 > [<ffffffff8149b644>] ? schedule+0x364/0xae0 > [<ffffffff811db00d>] blk_get_request+0x6d/0x80 > [<ffffffff81385f38>] scsi_execute+0x48/0x160 > [<ffffffff81386105>] scsi_execute_req+0xb5/0x130 > [<ffffffff8138d6ee>] read_capacity_10+0x8e/0x240 > [<ffffffff8138ec4f>] sd_revalidate_disk+0x5af/0x1a10 > [<ffffffff8110f6a8>] ? get_super+0x28/0xd0 > [<ffffffff8113ea31>] ? flush_disk+0x21/0xb0 > [<ffffffff8113eb2d>] check_disk_change+0x6d/0x80 > [<ffffffff8138e0e9>] sd_open+0xb9/0x190 > [<ffffffff8113fbd1>] __blkdev_get+0x91/0x380 > [<ffffffff811401c0>] ? blkdev_open+0x0/0x80 > [<ffffffff8113ff14>] blkdev_get+0x54/0x300 > [<ffffffff81117f79>] ? do_lookup+0xa9/0x2d0 > [<ffffffff811401c0>] ? blkdev_open+0x0/0x80 > [<ffffffff81140225>] blkdev_open+0x65/0x80 > [<ffffffff8110b7bd>] __dentry_open+0xcd/0x2e0 > [<ffffffff81117543>] ? generic_permission+0x23/0xb0 > [<ffffffff8110baf1>] nameidata_to_filp+0x71/0x80 > [<ffffffff811199f8>] finish_open+0xc8/0x1a0 > [<ffffffff8111b136>] ? do_path_lookup+0x66/0x140 > [<ffffffff8111c278>] do_filp_open+0x268/0x7e0 > [<ffffffff810eaba1>] ? handle_mm_fault+0x161/0x320 > [<ffffffff810eff04>] ? __vm_enough_memory+0x34/0x160 > [<ffffffff81127ae3>] ? alloc_fd+0x53/0x140 > [<ffffffff8110b5d9>] do_sys_open+0x69/0x110 > [<ffffffff8110b6c0>] sys_open+0x20/0x30 > [<ffffffff810025eb>] system_call_fastpath+0x16/0x1b > Code: 66 66 66 90 48 8b 47 18 48 8b 00 48 8b 40 70 48 85 c0 74 05 48 89 f7 ff d0 c9 c3 55 48 89 e5 66 66 66 66 90 48 8b 47 18 48 8b 00 <48> 8b 50 78 31 c0 48 85 d2 74 02 ff d2 c9 c3 90 55 48 89 e5 66 > RIP [<ffffffff811d33c0>] elv_may_queue+0x10/0x20 > RSP <ffff88021461f818> > CR2: 0000000000000078 > ---[ end trace 8e4bdfb146cdec93 ]--- This is not a USB problem (as can be seen from the fact that the stack dump doesn't include any USB-related functions). You just happened to trigger it by removing a USB device, but any hot-unpluggable block device would give the same result. It looks a lot like the sort of problem dealt with in this somewhat confusing thread (Re: [PATCH] SCSI IOCTL: Check for device deletion): http://marc.info/?l=linux-kernel&m=130628769605253&w=2 Alan Stern ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Kernel BUG after removing USB device 2011-05-27 18:26 ` Kernel BUG after removing USB device Alan Stern @ 2011-05-28 16:54 ` James Bottomley 2011-05-28 21:47 ` Greg KH 0 siblings, 1 reply; 3+ messages in thread From: James Bottomley @ 2011-05-28 16:54 UTC (permalink / raw) To: Alan Stern Cc: Bruce Guenter, Jens Axboe, USB list, SCSI development list, Kernel development list On Fri, 2011-05-27 at 14:26 -0400, Alan Stern wrote: > Added a few entries to the CC: list. Yes, it's a SCSI issue. There's a fix already in play, although not actually applied upstream yet: http://marc.info/?l=linux-scsi&m=130635674521428 It also relies on a couple of block patches (mentioned in the thread). James > On Fri, 27 May 2011, Bruce Guenter wrote: > > > Hi. > > > > I have a repeatable kernel BUG happening after I remove either of my two > > different Philips GoGear MP3 players. I have also seen what appeared to > > be a similar BUG on insertion once, but the problem is definitely > > repeatable on removal. After the BUG happens, the USB system is > > generally unusable > > > > I'm running an unmodified 2.6.38.7 kernel on Gentoo Linux, amd64 mode. > > The host controller is EHCI (ATI SB870). > > > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 > > IP: [<ffffffff811d33c0>] elv_may_queue+0x10/0x20 > > PGD 217164067 PUD 217221067 PMD 0 > > Oops: 0000 [#1] SMP > > last sysfs file: /sys/devices/pci0000:00/0000:00:13.2/class > > CPU 1 > > Modules linked in: nls_iso8859_1 nls_cp437 vfat fat f71882fg ipv6 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss btrfs zlib_deflate lzo_compress crc32c libcrc32c cryptd aes_x86_64 aes_generic xts gf128mul kvm_amd kvm oprofile cachefiles nfs lockd fscache auth_rpcgss sunrpc usbhid hid usblp usb_storage ohci_hcd snd_hda_codec_via ehci_hcd snd_hda_intel sg usbcore e1000 snd_hda_codec sr_mod snd_hwdep snd_pcm atl1c snd_timer evdev i2c_piix4 k10temp snd soundcore snd_page_alloc > > > > Pid: 4660, comm: blkid Not tainted 2.6.38.7 #40 MSI MS-7599/870-G45 (MS-7599) > > RIP: 0010:[<ffffffff811d33c0>] [<ffffffff811d33c0>] elv_may_queue+0x10/0x20 > > RSP: 0018:ffff88021461f818 EFLAGS: 00010097 > > RAX: 0000000000000000 RBX: ffff88022d521ea0 RCX: 0000000000000010 > > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88022d521ea0 > > RBP: ffff88021461f818 R08: 0000000000000008 R09: ffff880228006ea0 > > R10: ffff88021461fa58 R11: ffff88022bbd6000 R12: 0000000000000000 > > R13: 0000000000000001 R14: ffff88021461fa58 R15: ffff880228006ea0 > > FS: 00007fc5246ae740(0000) GS:ffff8800cfc80000(0000) knlGS:0000000000000000 > > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > > CR2: 0000000000000078 CR3: 0000000216ca1000 CR4: 00000000000006e0 > > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > > Process blkid (pid: 4660, threadinfo ffff88021461e000, task ffff88022bbbc100) > > Stack: > > ffff88021461f878 ffffffff811da17f ffff8800cfd11440 0000000000000082 > > 0000000000000000 ffffffff00000010 0000000000000001 ffff88022d521ea0 > > 0000000000000000 0000000000000010 ffff88021461fa58 ffff880228006ea0 > > Call Trace: > > [<ffffffff811da17f>] get_request+0x3f/0x3c0 > > [<ffffffff811dae3a>] get_request_wait+0x2a/0x190 > > [<ffffffff8149b644>] ? schedule+0x364/0xae0 > > [<ffffffff811db00d>] blk_get_request+0x6d/0x80 > > [<ffffffff81385f38>] scsi_execute+0x48/0x160 > > [<ffffffff81386105>] scsi_execute_req+0xb5/0x130 > > [<ffffffff8138d6ee>] read_capacity_10+0x8e/0x240 > > [<ffffffff8138ec4f>] sd_revalidate_disk+0x5af/0x1a10 > > [<ffffffff8110f6a8>] ? get_super+0x28/0xd0 > > [<ffffffff8113ea31>] ? flush_disk+0x21/0xb0 > > [<ffffffff8113eb2d>] check_disk_change+0x6d/0x80 > > [<ffffffff8138e0e9>] sd_open+0xb9/0x190 > > [<ffffffff8113fbd1>] __blkdev_get+0x91/0x380 > > [<ffffffff811401c0>] ? blkdev_open+0x0/0x80 > > [<ffffffff8113ff14>] blkdev_get+0x54/0x300 > > [<ffffffff81117f79>] ? do_lookup+0xa9/0x2d0 > > [<ffffffff811401c0>] ? blkdev_open+0x0/0x80 > > [<ffffffff81140225>] blkdev_open+0x65/0x80 > > [<ffffffff8110b7bd>] __dentry_open+0xcd/0x2e0 > > [<ffffffff81117543>] ? generic_permission+0x23/0xb0 > > [<ffffffff8110baf1>] nameidata_to_filp+0x71/0x80 > > [<ffffffff811199f8>] finish_open+0xc8/0x1a0 > > [<ffffffff8111b136>] ? do_path_lookup+0x66/0x140 > > [<ffffffff8111c278>] do_filp_open+0x268/0x7e0 > > [<ffffffff810eaba1>] ? handle_mm_fault+0x161/0x320 > > [<ffffffff810eff04>] ? __vm_enough_memory+0x34/0x160 > > [<ffffffff81127ae3>] ? alloc_fd+0x53/0x140 > > [<ffffffff8110b5d9>] do_sys_open+0x69/0x110 > > [<ffffffff8110b6c0>] sys_open+0x20/0x30 > > [<ffffffff810025eb>] system_call_fastpath+0x16/0x1b > > Code: 66 66 66 90 48 8b 47 18 48 8b 00 48 8b 40 70 48 85 c0 74 05 48 89 f7 ff d0 c9 c3 55 48 89 e5 66 66 66 66 90 48 8b 47 18 48 8b 00 <48> 8b 50 78 31 c0 48 85 d2 74 02 ff d2 c9 c3 90 55 48 89 e5 66 > > RIP [<ffffffff811d33c0>] elv_may_queue+0x10/0x20 > > RSP <ffff88021461f818> > > CR2: 0000000000000078 > > ---[ end trace 8e4bdfb146cdec93 ]--- > > This is not a USB problem (as can be seen from the fact that the stack > dump doesn't include any USB-related functions). You just happened to > trigger it by removing a USB device, but any hot-unpluggable block > device would give the same result. > > It looks a lot like the sort of problem dealt with in this somewhat > confusing thread (Re: [PATCH] SCSI IOCTL: Check for device deletion): > > http://marc.info/?l=linux-kernel&m=130628769605253&w=2 > > Alan Stern > > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Kernel BUG after removing USB device 2011-05-28 16:54 ` James Bottomley @ 2011-05-28 21:47 ` Greg KH 0 siblings, 0 replies; 3+ messages in thread From: Greg KH @ 2011-05-28 21:47 UTC (permalink / raw) To: James Bottomley Cc: Alan Stern, Bruce Guenter, Jens Axboe, USB list, SCSI development list, Kernel development list On Sat, May 28, 2011 at 11:54:06AM -0500, James Bottomley wrote: > On Fri, 2011-05-27 at 14:26 -0400, Alan Stern wrote: > > Added a few entries to the CC: list. > > Yes, it's a SCSI issue. There's a fix already in play, although not > actually applied upstream yet: > > http://marc.info/?l=linux-scsi&m=130635674521428 > > It also relies on a couple of block patches (mentioned in the thread). These are all marked properly so that -stable knows to pick them up, right? ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-05-28 21:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20110527174336.GA4410@untroubled.org>
2011-05-27 18:26 ` Kernel BUG after removing USB device Alan Stern
2011-05-28 16:54 ` James Bottomley
2011-05-28 21:47 ` Greg KH
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®