mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks
@ 2011-07-15  8:25 Peter Korsgaard
  2011-07-15  8:25 ` [PATCHv2 2/3] mcp23s08: isolate spi specific parts Peter Korsgaard
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Peter Korsgaard @ 2011-07-15  8:25 UTC (permalink / raw)
  To: grant.likely, linux-kernel; +Cc: Peter Korsgaard

There's no in-tree users, and bus notifiers are more generic anyway.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
 drivers/gpio/gpio-mcp23s08.c |   19 -------------------
 include/linux/spi/mcp23s08.h |    9 ---------
 2 files changed, 0 insertions(+), 28 deletions(-)

diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index da3e04f..ef61234 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -432,14 +432,6 @@ static int mcp23s08_probe(struct spi_device *spi)
 	 * handled here...
 	 */
 
-	if (pdata->setup) {
-		status = pdata->setup(spi,
-				pdata->base, data->ngpio,
-				pdata->context);
-		if (status < 0)
-			dev_dbg(&spi->dev, "setup --> %d\n", status);
-	}
-
 	return 0;
 
 fail:
@@ -459,20 +451,9 @@ fail:
 static int mcp23s08_remove(struct spi_device *spi)
 {
 	struct mcp23s08_driver_data	*data = spi_get_drvdata(spi);
-	struct mcp23s08_platform_data	*pdata = spi->dev.platform_data;
 	unsigned			addr;
 	int				status = 0;
 
-	if (pdata->teardown) {
-		status = pdata->teardown(spi,
-				pdata->base, data->ngpio,
-				pdata->context);
-		if (status < 0) {
-			dev_err(&spi->dev, "%s --> %d\n", "teardown", status);
-			return status;
-		}
-	}
-
 	for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) {
 		int tmp;
 
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
index c42cff8..2d676d5 100644
--- a/include/linux/spi/mcp23s08.h
+++ b/include/linux/spi/mcp23s08.h
@@ -22,13 +22,4 @@ struct mcp23s08_platform_data {
 	 * base to base+15 (or base+31 for s17 variant).
 	 */
 	unsigned	base;
-
-	void		*context;	/* param to setup/teardown */
-
-	int		(*setup)(struct spi_device *spi,
-					int gpio, unsigned ngpio,
-					void *context);
-	int		(*teardown)(struct spi_device *spi,
-					int gpio, unsigned ngpio,
-					void *context);
 };
-- 
1.7.5.4


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCHv2 2/3] mcp23s08: isolate spi specific parts
  2011-07-15  8:25 [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks Peter Korsgaard
@ 2011-07-15  8:25 ` Peter Korsgaard
  2011-07-15  8:25 ` [PATCHv2 3/3] mcp23s08: add i2c support Peter Korsgaard
  2011-07-15 19:56 ` [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks Grant Likely
  2 siblings, 0 replies; 4+ messages in thread
From: Peter Korsgaard @ 2011-07-15  8:25 UTC (permalink / raw)
  To: grant.likely, linux-kernel; +Cc: Peter Korsgaard

Change spi member of struct mcp23s08 to be a ops-specific opaque data
pointer, and move spi specific knowledge out of mcp23s08_probe_one().

No functional change, but is needed to add i2c support.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
Changes since v1:
- Adjust according to Grants feedback
- Add mcp23s08_spi_{init,exit} wrappers

 drivers/gpio/gpio-mcp23s08.c |   81 +++++++++++++++++++++++++++++------------
 1 files changed, 57 insertions(+), 24 deletions(-)

diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index ef61234..7b78f94 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -50,7 +50,6 @@ struct mcp23s08_ops {
 };
 
 struct mcp23s08 {
-	struct spi_device	*spi;
 	u8			addr;
 
 	u16			cache[11];
@@ -60,6 +59,7 @@ struct mcp23s08 {
 	struct gpio_chip	chip;
 
 	const struct mcp23s08_ops	*ops;
+	void			*data; /* ops specific data */
 };
 
 /* A given spi_device can represent up to eight mcp23sxx chips
@@ -73,6 +73,8 @@ struct mcp23s08_driver_data {
 	struct mcp23s08		chip[];
 };
 
+#ifdef CONFIG_SPI_MASTER
+
 static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
 {
 	u8	tx[2], rx[1];
@@ -80,7 +82,7 @@ static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
 
 	tx[0] = mcp->addr | 0x01;
 	tx[1] = reg;
-	status = spi_write_then_read(mcp->spi, tx, sizeof tx, rx, sizeof rx);
+	status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx);
 	return (status < 0) ? status : rx[0];
 }
 
@@ -91,7 +93,7 @@ static int mcp23s08_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
 	tx[0] = mcp->addr;
 	tx[1] = reg;
 	tx[2] = val;
-	return spi_write_then_read(mcp->spi, tx, sizeof tx, NULL, 0);
+	return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0);
 }
 
 static int
@@ -106,7 +108,7 @@ mcp23s08_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
 	tx[1] = reg;
 
 	tmp = (u8 *)vals;
-	status = spi_write_then_read(mcp->spi, tx, sizeof tx, tmp, n);
+	status = spi_write_then_read(mcp->data, tx, sizeof tx, tmp, n);
 	if (status >= 0) {
 		while (n--)
 			vals[n] = tmp[n]; /* expand to 16bit */
@@ -121,7 +123,7 @@ static int mcp23s17_read(struct mcp23s08 *mcp, unsigned reg)
 
 	tx[0] = mcp->addr | 0x01;
 	tx[1] = reg << 1;
-	status = spi_write_then_read(mcp->spi, tx, sizeof tx, rx, sizeof rx);
+	status = spi_write_then_read(mcp->data, tx, sizeof tx, rx, sizeof rx);
 	return (status < 0) ? status : (rx[0] | (rx[1] << 8));
 }
 
@@ -133,7 +135,7 @@ static int mcp23s17_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
 	tx[1] = reg << 1;
 	tx[2] = val;
 	tx[3] = val >> 8;
-	return spi_write_then_read(mcp->spi, tx, sizeof tx, NULL, 0);
+	return spi_write_then_read(mcp->data, tx, sizeof tx, NULL, 0);
 }
 
 static int
@@ -147,7 +149,7 @@ mcp23s17_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
 	tx[0] = mcp->addr | 0x01;
 	tx[1] = reg << 1;
 
-	status = spi_write_then_read(mcp->spi, tx, sizeof tx,
+	status = spi_write_then_read(mcp->data, tx, sizeof tx,
 				     (u8 *)vals, n * 2);
 	if (status >= 0) {
 		while (n--)
@@ -169,6 +171,7 @@ static const struct mcp23s08_ops mcp23s17_ops = {
 	.read_regs	= mcp23s17_read_regs,
 };
 
+#endif /* CONFIG_SPI_MASTER */
 
 /*----------------------------------------------------------------------*/
 
@@ -296,17 +299,16 @@ done:
 
 /*----------------------------------------------------------------------*/
 
-static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr,
+static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
+			      void *data, unsigned addr,
 			      unsigned type, unsigned base, unsigned pullups)
 {
-	struct mcp23s08_driver_data	*data = spi_get_drvdata(spi);
-	struct mcp23s08			*mcp = data->mcp[addr];
-	int				status;
+	int status;
 
 	mutex_init(&mcp->lock);
 
-	mcp->spi = spi;
-	mcp->addr = 0x40 | (addr << 1);
+	mcp->data = data;
+	mcp->addr = addr;
 
 	mcp->chip.direction_input = mcp23s08_direction_input;
 	mcp->chip.get = mcp23s08_get;
@@ -314,18 +316,29 @@ static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr,
 	mcp->chip.set = mcp23s08_set;
 	mcp->chip.dbg_show = mcp23s08_dbg_show;
 
-	if (type == MCP_TYPE_S17) {
-		mcp->ops = &mcp23s17_ops;
-		mcp->chip.ngpio = 16;
-		mcp->chip.label = "mcp23s17";
-	} else {
+	switch (type) {
+#ifdef CONFIG_SPI_MASTER
+	case MCP_TYPE_S08:
 		mcp->ops = &mcp23s08_ops;
 		mcp->chip.ngpio = 8;
 		mcp->chip.label = "mcp23s08";
+		break;
+
+	case MCP_TYPE_S17:
+		mcp->ops = &mcp23s17_ops;
+		mcp->chip.ngpio = 16;
+		mcp->chip.label = "mcp23s17";
+		break;
+#endif /* CONFIG_SPI_MASTER */
+
+	default:
+		dev_err(dev, "invalid device type (%d)\n", type);
+		return -EINVAL;
 	}
+
 	mcp->chip.base = base;
 	mcp->chip.can_sleep = 1;
-	mcp->chip.dev = &spi->dev;
+	mcp->chip.dev = dev;
 	mcp->chip.owner = THIS_MODULE;
 
 	/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
@@ -371,11 +384,13 @@ static int mcp23s08_probe_one(struct spi_device *spi, unsigned addr,
 	status = gpiochip_add(&mcp->chip);
 fail:
 	if (status < 0)
-		dev_dbg(&spi->dev, "can't setup chip %d, --> %d\n",
-				addr, status);
+		dev_dbg(dev, "can't setup chip %d, --> %d\n",
+			addr, status);
 	return status;
 }
 
+#ifdef CONFIG_SPI_MASTER
+
 static int mcp23s08_probe(struct spi_device *spi)
 {
 	struct mcp23s08_platform_data	*pdata;
@@ -418,7 +433,8 @@ static int mcp23s08_probe(struct spi_device *spi)
 			continue;
 		chips--;
 		data->mcp[addr] = &data->chip[chips];
-		status = mcp23s08_probe_one(spi, addr, type, base,
+		status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
+					    0x40 | (addr << 1), type, base,
 					    pdata->chip[addr].pullups);
 		if (status < 0)
 			goto fail;
@@ -488,11 +504,28 @@ static struct spi_driver mcp23s08_driver = {
 	},
 };
 
+static int __init mcp23s08_spi_init(void)
+{
+	return spi_register_driver(&mcp23s08_driver);
+}
+
+static void mcp23s08_spi_exit(void)
+{
+	spi_unregister_driver(&mcp23s08_driver);
+}
+
+#else
+
+static int __init mcp23s08_spi_init(void) { return 0; }
+static void mcp23s08_spi_exit(void) { }
+
+#endif /* CONFIG_SPI_MASTER */
+
 /*----------------------------------------------------------------------*/
 
 static int __init mcp23s08_init(void)
 {
-	return spi_register_driver(&mcp23s08_driver);
+	return mcp23s08_spi_init();
 }
 /* register after spi postcore initcall and before
  * subsys initcalls that may rely on these GPIOs
@@ -501,7 +534,7 @@ subsys_initcall(mcp23s08_init);
 
 static void __exit mcp23s08_exit(void)
 {
-	spi_unregister_driver(&mcp23s08_driver);
+	mcp23s08_spi_exit();
 }
 module_exit(mcp23s08_exit);
 
-- 
1.7.5.4


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCHv2 3/3] mcp23s08: add i2c support
  2011-07-15  8:25 [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks Peter Korsgaard
  2011-07-15  8:25 ` [PATCHv2 2/3] mcp23s08: isolate spi specific parts Peter Korsgaard
@ 2011-07-15  8:25 ` Peter Korsgaard
  2011-07-15 19:56 ` [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks Grant Likely
  2 siblings, 0 replies; 4+ messages in thread
From: Peter Korsgaard @ 2011-07-15  8:25 UTC (permalink / raw)
  To: grant.likely, linux-kernel; +Cc: Peter Korsgaard

Add i2c bindings for the mcp230xx devices. This is quite a lot simpler
than the spi one as there's no funky sub addressing done (one struct
i2c_client per struct gpio_chip).

The mcp23s08_platform_data structure is reused for i2c, even though
only a single mcp23s08_chip_info structure is needed.

To use, simply fill out a platform_data structure and pass it in
i2c_board_info, E.G.:

static const struct mcp23s08_platform_data mcp23017_data = {
	.chip[0] = {
		.pullups = 0x00ff,
	},
	.base = 240,
};

static struct i2c_board_info __initdata i2c_devs[] = {
	{ I2C_BOARD_INFO("mcp23017", 0x20),
	  .platform_data = &smartview_mcp23017_data, },
	...
};

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
Changes since v1:
- Adjust according to Grants feedback
- Add mcp23s08_i2c_{init,exit} wrappers. Unwind on registration failures

 drivers/gpio/Kconfig         |    7 +-
 drivers/gpio/gpio-mcp23s08.c |  192 ++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 191 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 111321c..6778f56 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -418,10 +418,11 @@ config GPIO_MAX7301
 	  GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
 
 config GPIO_MCP23S08
-	tristate "Microchip MCP23Sxx I/O expander"
-	depends on SPI_MASTER
+	tristate "Microchip MCP23xxx I/O expander"
+	depends on SPI_MASTER || I2C
 	help
-	  SPI driver for Microchip MCP23S08/MPC23S17 I/O expanders.
+	  SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
+	  I/O expanders.
 	  This provides a GPIO interface supporting inputs and outputs.
 
 config GPIO_MC33880
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 7b78f94..1ef46e6 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -1,11 +1,12 @@
 /*
- * MCP23S08 SPI gpio expander driver
+ * MCP23S08 SPI/GPIO gpio expander driver
  */
 
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/gpio.h>
+#include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/mcp23s08.h>
 #include <linux/slab.h>
@@ -16,13 +17,13 @@
  */
 #define MCP_TYPE_S08	0
 #define MCP_TYPE_S17	1
+#define MCP_TYPE_008	2
+#define MCP_TYPE_017	3
 
 /* Registers are all 8 bits wide.
  *
  * The mcp23s17 has twice as many bits, and can be configured to work
  * with either 16 bit registers or with two adjacent 8 bit banks.
- *
- * Also, there are I2C versions of both chips.
  */
 #define MCP_IODIR	0x00		/* init/reset:  all ones */
 #define MCP_IPOL	0x01
@@ -73,6 +74,72 @@ struct mcp23s08_driver_data {
 	struct mcp23s08		chip[];
 };
 
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_I2C
+
+static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg)
+{
+	return i2c_smbus_read_byte_data(mcp->data, reg);
+}
+
+static int mcp23008_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
+{
+	return i2c_smbus_write_byte_data(mcp->data, reg, val);
+}
+
+static int
+mcp23008_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
+{
+	while (n--) {
+		int ret = mcp23008_read(mcp, reg++);
+		if (ret < 0)
+			return ret;
+		*vals++ = ret;
+	}
+
+	return 0;
+}
+
+static int mcp23017_read(struct mcp23s08 *mcp, unsigned reg)
+{
+	return i2c_smbus_read_word_data(mcp->data, reg << 1);
+}
+
+static int mcp23017_write(struct mcp23s08 *mcp, unsigned reg, unsigned val)
+{
+	return i2c_smbus_write_word_data(mcp->data, reg << 1, val);
+}
+
+static int
+mcp23017_read_regs(struct mcp23s08 *mcp, unsigned reg, u16 *vals, unsigned n)
+{
+	while (n--) {
+		int ret = mcp23017_read(mcp, reg++);
+		if (ret < 0)
+			return ret;
+		*vals++ = ret;
+	}
+
+	return 0;
+}
+
+static const struct mcp23s08_ops mcp23008_ops = {
+	.read		= mcp23008_read,
+	.write		= mcp23008_write,
+	.read_regs	= mcp23008_read_regs,
+};
+
+static const struct mcp23s08_ops mcp23017_ops = {
+	.read		= mcp23017_read,
+	.write		= mcp23017_write,
+	.read_regs	= mcp23017_read_regs,
+};
+
+#endif /* CONFIG_I2C */
+
+/*----------------------------------------------------------------------*/
+
 #ifdef CONFIG_SPI_MASTER
 
 static int mcp23s08_read(struct mcp23s08 *mcp, unsigned reg)
@@ -331,6 +398,20 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
 		break;
 #endif /* CONFIG_SPI_MASTER */
 
+#ifdef CONFIG_I2C
+	case MCP_TYPE_008:
+		mcp->ops = &mcp23008_ops;
+		mcp->chip.ngpio = 8;
+		mcp->chip.label = "mcp23008";
+		break;
+
+	case MCP_TYPE_017:
+		mcp->ops = &mcp23017_ops;
+		mcp->chip.ngpio = 16;
+		mcp->chip.label = "mcp23017";
+		break;
+#endif /* CONFIG_I2C */
+
 	default:
 		dev_err(dev, "invalid device type (%d)\n", type);
 		return -EINVAL;
@@ -389,6 +470,91 @@ fail:
 	return status;
 }
 
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_I2C
+
+static int __devinit mcp230xx_probe(struct i2c_client *client,
+				    const struct i2c_device_id *id)
+{
+	struct mcp23s08_platform_data *pdata;
+	struct mcp23s08 *mcp;
+	int status;
+
+	pdata = client->dev.platform_data;
+	if (!pdata || !gpio_is_valid(pdata->base)) {
+		dev_dbg(&client->dev, "invalid or missing platform data\n");
+		return -EINVAL;
+	}
+
+	mcp = kzalloc(sizeof *mcp, GFP_KERNEL);
+	if (!mcp)
+		return -ENOMEM;
+
+	status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
+				    id->driver_data, pdata->base,
+				    pdata->chip[0].pullups);
+	if (status)
+		goto fail;
+
+	i2c_set_clientdata(client, mcp);
+
+	return 0;
+
+fail:
+	kfree(mcp);
+
+	return status;
+}
+
+static int __devexit mcp230xx_remove(struct i2c_client *client)
+{
+	struct mcp23s08 *mcp = i2c_get_clientdata(client);
+	int status;
+
+	status = gpiochip_remove(&mcp->chip);
+	if (status == 0)
+		kfree(mcp);
+
+	return status;
+}
+
+static const struct i2c_device_id mcp230xx_id[] = {
+	{ "mcp23008", MCP_TYPE_008 },
+	{ "mcp23017", MCP_TYPE_017 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
+
+static struct i2c_driver mcp230xx_driver = {
+	.driver = {
+		.name	= "mcp230xx",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= mcp230xx_probe,
+	.remove		= __devexit_p(mcp230xx_remove),
+	.id_table	= mcp230xx_id,
+};
+
+static int __init mcp23s08_i2c_init(void)
+{
+	return i2c_add_driver(&mcp230xx_driver);
+}
+
+static void mcp23s08_i2c_exit(void)
+{
+	i2c_del_driver(&mcp230xx_driver);
+}
+
+#else
+
+static int __init mcp23s08_i2c_init(void) { return 0; }
+static void mcp23s08_i2c_exit(void) { }
+
+#endif /* CONFIG_I2C */
+
+/*----------------------------------------------------------------------*/
+
 #ifdef CONFIG_SPI_MASTER
 
 static int mcp23s08_probe(struct spi_device *spi)
@@ -525,9 +691,24 @@ static void mcp23s08_spi_exit(void) { }
 
 static int __init mcp23s08_init(void)
 {
-	return mcp23s08_spi_init();
+	int ret;
+
+	ret = mcp23s08_spi_init();
+	if (ret)
+		goto spi_fail;
+
+	ret = mcp23s08_i2c_init();
+	if (ret)
+		goto i2c_fail;
+
+	return 0;
+
+ i2c_fail:
+	mcp23s08_spi_exit();
+ spi_fail:
+	return ret;
 }
-/* register after spi postcore initcall and before
+/* register after spi/i2c postcore initcall and before
  * subsys initcalls that may rely on these GPIOs
  */
 subsys_initcall(mcp23s08_init);
@@ -535,6 +716,7 @@ subsys_initcall(mcp23s08_init);
 static void __exit mcp23s08_exit(void)
 {
 	mcp23s08_spi_exit();
+	mcp23s08_i2c_exit();
 }
 module_exit(mcp23s08_exit);
 
-- 
1.7.5.4


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks
  2011-07-15  8:25 [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks Peter Korsgaard
  2011-07-15  8:25 ` [PATCHv2 2/3] mcp23s08: isolate spi specific parts Peter Korsgaard
  2011-07-15  8:25 ` [PATCHv2 3/3] mcp23s08: add i2c support Peter Korsgaard
@ 2011-07-15 19:56 ` Grant Likely
  2 siblings, 0 replies; 4+ messages in thread
From: Grant Likely @ 2011-07-15 19:56 UTC (permalink / raw)
  To: Peter Korsgaard; +Cc: linux-kernel

On Fri, Jul 15, 2011 at 10:25:30AM +0200, Peter Korsgaard wrote:
> There's no in-tree users, and bus notifiers are more generic anyway.
> 
> Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Applied all three, thanks.

g.

> ---
>  drivers/gpio/gpio-mcp23s08.c |   19 -------------------
>  include/linux/spi/mcp23s08.h |    9 ---------
>  2 files changed, 0 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
> index da3e04f..ef61234 100644
> --- a/drivers/gpio/gpio-mcp23s08.c
> +++ b/drivers/gpio/gpio-mcp23s08.c
> @@ -432,14 +432,6 @@ static int mcp23s08_probe(struct spi_device *spi)
>  	 * handled here...
>  	 */
>  
> -	if (pdata->setup) {
> -		status = pdata->setup(spi,
> -				pdata->base, data->ngpio,
> -				pdata->context);
> -		if (status < 0)
> -			dev_dbg(&spi->dev, "setup --> %d\n", status);
> -	}
> -
>  	return 0;
>  
>  fail:
> @@ -459,20 +451,9 @@ fail:
>  static int mcp23s08_remove(struct spi_device *spi)
>  {
>  	struct mcp23s08_driver_data	*data = spi_get_drvdata(spi);
> -	struct mcp23s08_platform_data	*pdata = spi->dev.platform_data;
>  	unsigned			addr;
>  	int				status = 0;
>  
> -	if (pdata->teardown) {
> -		status = pdata->teardown(spi,
> -				pdata->base, data->ngpio,
> -				pdata->context);
> -		if (status < 0) {
> -			dev_err(&spi->dev, "%s --> %d\n", "teardown", status);
> -			return status;
> -		}
> -	}
> -
>  	for (addr = 0; addr < ARRAY_SIZE(data->mcp); addr++) {
>  		int tmp;
>  
> diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
> index c42cff8..2d676d5 100644
> --- a/include/linux/spi/mcp23s08.h
> +++ b/include/linux/spi/mcp23s08.h
> @@ -22,13 +22,4 @@ struct mcp23s08_platform_data {
>  	 * base to base+15 (or base+31 for s17 variant).
>  	 */
>  	unsigned	base;
> -
> -	void		*context;	/* param to setup/teardown */
> -
> -	int		(*setup)(struct spi_device *spi,
> -					int gpio, unsigned ngpio,
> -					void *context);
> -	int		(*teardown)(struct spi_device *spi,
> -					int gpio, unsigned ngpio,
> -					void *context);
>  };
> -- 
> 1.7.5.4
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2011-07-15 19:56 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-07-15  8:25 [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks Peter Korsgaard
2011-07-15  8:25 ` [PATCHv2 2/3] mcp23s08: isolate spi specific parts Peter Korsgaard
2011-07-15  8:25 ` [PATCHv2 3/3] mcp23s08: add i2c support Peter Korsgaard
2011-07-15 19:56 ` [PATCHv2 1/3] mcp23s08: get rid of setup/teardown callbacks Grant Likely

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®