From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Linux PM mailing list <linux-pm@lists.linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
"Linux-sh list" <linux-sh@vger.kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
Kevin Hilman <khilman@ti.com>,
jean.pihet@newoldbits.com, Ming Lei <tom.leiming@gmail.com>
Subject: [PATCH 2/3] PM / Runtime: Don't run callbacks under lock for power.irq_safe set
Date: Sat, 24 Sep 2011 23:25:53 +0200 [thread overview]
Message-ID: <201109242325.53563.rjw@sisk.pl> (raw)
In-Reply-To: <201109242323.03474.rjw@sisk.pl>
From: Rafael J. Wysocki <rjw@sisk.pl>
The rpm_suspend() and rpm_resume() routines execute subsystem or PM
domain callbacks under power.lock if power.irq_safe is set for the
given device. This is inconsistent with that rpm_idle() does after
commit 02b2677 (PM / Runtime: Allow _put_sync() from
interrupts-disabled context) and is problematic for subsystems and PM
domains wanting to use power.lock for synchronization in their
runtime PM callbacks.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
drivers/base/power/runtime.c | 68 +++++++++++++++++++++++++++++--------------
1 file changed, 46 insertions(+), 22 deletions(-)
Index: linux/drivers/base/power/runtime.c
===================================================================
--- linux.orig/drivers/base/power/runtime.c
+++ linux/drivers/base/power/runtime.c
@@ -155,6 +155,31 @@ static int rpm_check_suspend_allowed(str
}
/**
+ * __rpm_callback - Run a given runtime PM callback for a given device.
+ * @cb: Runtime PM callback to run.
+ * @dev: Device to run the callback for.
+ */
+static int __rpm_callback(int (*cb)(struct device *), struct device *dev)
+ __releases(&dev->power.lock) __acquires(&dev->power.lock)
+{
+ int retval;
+
+ if (dev->power.irq_safe)
+ spin_unlock(&dev->power.lock);
+ else
+ spin_unlock_irq(&dev->power.lock);
+
+ retval = cb(dev);
+
+ if (dev->power.irq_safe)
+ spin_lock(&dev->power.lock);
+ else
+ spin_lock_irq(&dev->power.lock);
+
+ return retval;
+}
+
+/**
* rpm_idle - Notify device bus type if the device can be suspended.
* @dev: Device to notify the bus type about.
* @rpmflags: Flag bits.
@@ -225,19 +250,8 @@ static int rpm_idle(struct device *dev,
else
callback = NULL;
- if (callback) {
- if (dev->power.irq_safe)
- spin_unlock(&dev->power.lock);
- else
- spin_unlock_irq(&dev->power.lock);
-
- callback(dev);
-
- if (dev->power.irq_safe)
- spin_lock(&dev->power.lock);
- else
- spin_lock_irq(&dev->power.lock);
- }
+ if (callback)
+ __rpm_callback(callback, dev);
dev->power.idle_notification = false;
wake_up_all(&dev->power.wait_queue);
@@ -252,22 +266,14 @@ static int rpm_idle(struct device *dev,
* @dev: Device to run the callback for.
*/
static int rpm_callback(int (*cb)(struct device *), struct device *dev)
- __releases(&dev->power.lock) __acquires(&dev->power.lock)
{
int retval;
if (!cb)
return -ENOSYS;
- if (dev->power.irq_safe) {
- retval = cb(dev);
- } else {
- spin_unlock_irq(&dev->power.lock);
-
- retval = cb(dev);
+ retval = __rpm_callback(cb, dev);
- spin_lock_irq(&dev->power.lock);
- }
dev->power.runtime_error = retval;
return retval != -EACCES ? retval : -EIO;
}
@@ -347,6 +353,15 @@ static int rpm_suspend(struct device *de
goto out;
}
+ if (dev->power.irq_safe) {
+ spin_unlock(&dev->power.lock);
+
+ cpu_relax();
+
+ spin_lock(&dev->power.lock);
+ goto repeat;
+ }
+
/* Wait for the other suspend running in parallel with us. */
for (;;) {
prepare_to_wait(&dev->power.wait_queue, &wait,
@@ -496,6 +511,15 @@ static int rpm_resume(struct device *dev
goto out;
}
+ if (dev->power.irq_safe) {
+ spin_unlock(&dev->power.lock);
+
+ cpu_relax();
+
+ spin_lock(&dev->power.lock);
+ goto repeat;
+ }
+
/* Wait for the operation carried out in parallel with us. */
for (;;) {
prepare_to_wait(&dev->power.wait_queue, &wait,
next prev parent reply other threads:[~2011-09-24 21:25 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-30 22:17 [PATCH 0/5] PM: Generic PM domains and device PM QoS Rafael J. Wysocki
2011-08-30 22:18 ` [PATCH 1/5] PM / Domains: Split device PM domain data into base and need_restore Rafael J. Wysocki
2011-08-30 22:20 ` [PATCH 2/5] PM / Runtime: Do not run callbacks under lock for power.irq_safe set Rafael J. Wysocki
2011-09-12 8:26 ` Ming Lei
2011-09-12 21:52 ` Rafael J. Wysocki
[not found] ` <201109122344.02386.rjw@sisk.pl>
2011-09-13 1:22 ` Ming Lei
2011-09-13 16:06 ` Rafael J. Wysocki
2011-09-14 1:12 ` Ming Lei
2011-09-14 20:45 ` Rafael J. Wysocki
2011-09-15 10:55 ` Ming Lei
2011-08-30 22:21 ` [PATCH 3/5] PM / QoS: Add function dev_pm_qos_read_value() Rafael J. Wysocki
2011-09-01 15:13 ` Jean Pihet
2011-09-01 22:07 ` Rafael J. Wysocki
2011-09-02 6:49 ` Jean Pihet
2011-09-02 23:55 ` Rafael J. Wysocki
2011-09-03 8:02 ` Rafael J. Wysocki
2011-09-05 7:51 ` Jean Pihet
2011-09-05 15:30 ` Rafael J. Wysocki
2011-09-05 7:44 ` Jean Pihet
2011-08-30 22:21 ` [RFC][PATCH 4/5] PM / Domains: Add device stop governor function Rafael J. Wysocki
2011-08-30 22:22 ` [RFC][PATCH 5/5] PM / Domains: Add default power off " Rafael J. Wysocki
2011-09-01 15:17 ` Jean Pihet
2011-09-01 22:11 ` Rafael J. Wysocki
2011-09-01 15:28 ` [PATCH 0/5] PM: Generic PM domains and device PM QoS Jean Pihet
2011-09-01 22:14 ` Rafael J. Wysocki
2011-09-24 21:23 ` [PATCH 0/3] PM: Runtime PM and device PM QoS refinements Rafael J. Wysocki
2011-09-24 21:24 ` [PATCH 1/3] PM / Domains: Split device PM domain data into base and need_restore Rafael J. Wysocki
2011-09-24 21:25 ` Rafael J. Wysocki [this message]
2011-09-25 8:24 ` [PATCH 2/3] PM / Runtime: Don't run callbacks under lock for power.irq_safe set Ming Lei
2011-09-26 23:59 ` Kevin Hilman
2011-09-27 17:16 ` Rafael J. Wysocki
2011-09-27 19:50 ` Rafael J. Wysocki
2011-09-29 0:17 ` Kevin Hilman
2011-09-24 21:26 ` [PATCH 3/3] PM / QoS: Add function dev_pm_qos_read_value() (v2) Rafael J. Wysocki
2011-09-29 8:11 ` Jean Pihet
2011-09-29 20:33 ` Rafael J. Wysocki
2011-09-30 8:08 ` Jean Pihet
2011-09-30 16:46 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201109242325.53563.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=jean.pihet@newoldbits.com \
--cc=khilman@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=tom.leiming@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®