From: Andrew Walrond <andrew@walrond.org>
To: linux-kernel@vger.kernel.org
Subject: Re: eth0/1 swapped places after kernel Upgrade 3.0.8 -> 3.1.0 (and udev 172 -> 174)
Date: Fri, 11 Nov 2011 11:40:15 +0000 [thread overview]
Message-ID: <20111111114014.GA1962@andrews-imac.pitney-fabs> (raw)
In-Reply-To: <20111102101404.GA5195@andrew-xps.home>
On Wed, Nov 02, 2011 at 10:14:04AM +0000, Andrew Walrond wrote:
> Not sure if this is a udev or kernel issue, or indeed whether I
> should expect these devices to have persistent naming at all
> without some udev configuration of my own, but I thought I'd
> report it just in case it's useful.
>
> Output from lspci:
>
> 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
> 07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12)
>
It's worse than I thought; eth0/eth1 are randomly swapping places on boot.
Is this likely to be a kernel or udev problem?
Relevant kernel messages:
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:1d:09:64:ae:03
bnx2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
bnx2 0000:07:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:1d:09:64:ae:05
bnx2 0000:03:00.0: irq 47 for MSI/MSI-X
bnx2 0000:03:00.0: eth0: using MSI
bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
bnx2 0000:07:00.0: irq 48 for MSI/MSI-X
bnx2 0000:07:00.0: eth1: using MSI
bnx2 0000:07:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
Please let me know if I need to redirect this elsewhere.
> Andrew Walrond
>
next prev parent reply other threads:[~2011-11-11 11:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-02 10:14 Andrew Walrond
2011-11-11 11:40 ` Andrew Walrond [this message]
2011-11-11 11:56 ` Alan Cox
2011-11-11 12:37 ` Andrew Walrond
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111111114014.GA1962@andrews-imac.pitney-fabs \
--to=andrew@walrond.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®