* [PATCH 1/4] mmc: Update logging style
2011-11-15 23:32 [PATCH 0/4] mmc: logging neatening and mmc_host_<level> Joe Perches
@ 2011-11-15 23:32 ` Joe Perches
2011-11-16 1:18 ` NamJae Jeon
2011-11-15 23:32 ` [PATCH 2/4] wbsd: Use current logging Joe Perches
` (2 subsequent siblings)
3 siblings, 1 reply; 19+ messages in thread
From: Joe Perches @ 2011-11-15 23:32 UTC (permalink / raw)
To: Ben Dooks, Chris Ball, Alex Dubov, Pierre Ossman
Cc: linux-mmc, linux-kernel, linux-omap, linux-arm-kernel
Convert pr_warning to pr_warn.
Coalesce format strings.
Align arguments.
Add missing \n.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mmc/card/block.c | 4 +-
drivers/mmc/card/queue.c | 6 +---
drivers/mmc/card/sdio_uart.c | 10 ++++----
drivers/mmc/core/bus.c | 4 +-
drivers/mmc/core/core.c | 9 +++----
drivers/mmc/core/mmc.c | 28 ++++++++++--------------
drivers/mmc/core/mmc_ops.c | 4 +-
drivers/mmc/core/sd.c | 46 +++++++++++++++++------------------------
drivers/mmc/core/sdio.c | 5 +--
drivers/mmc/core/sdio_bus.c | 4 +-
drivers/mmc/core/sdio_cis.c | 7 ++---
drivers/mmc/core/sdio_irq.c | 7 ++---
drivers/mmc/host/mmci.c | 5 +--
drivers/mmc/host/omap_hsmmc.c | 5 +--
drivers/mmc/host/s3cmci.c | 3 +-
drivers/mmc/host/sdhci.c | 18 +++++++---------
drivers/mmc/host/tifm_sd.c | 3 +-
drivers/mmc/host/wbsd.c | 24 ++++++++-------------
18 files changed, 82 insertions(+), 110 deletions(-)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index c80bb6d..fe489b1 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1238,8 +1238,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
case MMC_BLK_ECC_ERR:
if (brq->data.blocks > 1) {
/* Redo read one sector at a time */
- pr_warning("%s: retrying using single block read\n",
- req->rq_disk->disk_name);
+ pr_warn("%s: retrying using single block read\n",
+ req->rq_disk->disk_name);
disable_multi = 1;
break;
}
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index dcad59c..f1fd979 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -197,14 +197,12 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
if (bouncesz > 512) {
mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_cur->bounce_buf) {
- pr_warning("%s: unable to "
- "allocate bounce cur buffer\n",
+ pr_warn("%s: unable to allocate bounce cur buffer\n",
mmc_card_name(card));
}
mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_prev->bounce_buf) {
- pr_warning("%s: unable to "
- "allocate bounce prev buffer\n",
+ pr_warn("%s: unable to allocate bounce prev buffer\n",
mmc_card_name(card));
kfree(mqrq_cur->bounce_buf);
mqrq_cur->bounce_buf = NULL;
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 2c151e1..e264ee2 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -1082,8 +1082,8 @@ static int sdio_uart_probe(struct sdio_func *func,
return -ENOMEM;
if (func->class == SDIO_CLASS_UART) {
- pr_warning("%s: need info on UART class basic setup\n",
- sdio_func_id(func));
+ pr_warn("%s: need info on UART class basic setup\n",
+ sdio_func_id(func));
kfree(port);
return -ENOSYS;
} else if (func->class == SDIO_CLASS_GPS) {
@@ -1101,9 +1101,9 @@ static int sdio_uart_probe(struct sdio_func *func,
break;
}
if (!tpl) {
- pr_warning(
- "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
- sdio_func_id(func));
+ pr_warn(
+ "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
+ sdio_func_id(func));
kfree(port);
return -EINVAL;
}
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 6be4924..2e1f028 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -303,10 +303,10 @@ int mmc_add_card(struct mmc_card *card)
mmc_card_ddr_mode(card) ? "DDR " : "",
type);
} else {
- printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
+ pr_info("%s: new %s%s%s card at address %04x\n",
mmc_hostname(card->host),
mmc_sd_card_uhs(card) ? "ultra high speed " :
- (mmc_card_highspeed(card) ? "high speed " : ""),
+ mmc_card_highspeed(card) ? "high speed " : "",
mmc_card_ddr_mode(card) ? "DDR " : "",
type, card->rca);
}
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 74a012a..54d6a13 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1163,8 +1163,8 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
mmc_set_ios(host);
mmc_host_clk_release(host);
} else {
- pr_warning("%s: host doesn't support card's voltages\n",
- mmc_hostname(host));
+ pr_warn("%s: host doesn't support card's voltages\n",
+ mmc_hostname(host));
ocr = 0;
}
@@ -2375,9 +2375,8 @@ int mmc_resume_host(struct mmc_host *host)
BUG_ON(!host->bus_ops->resume);
err = host->bus_ops->resume(host);
if (err) {
- pr_warning("%s: error %d during resume "
- "(card was removed?)\n",
- mmc_hostname(host), err);
+ pr_warn("%s: error %d during resume (card was removed?)\n",
+ mmc_hostname(host), err);
err = 0;
}
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 90de9ba..bbd7adb 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -223,9 +223,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
"Card will be ignored.\n",
mmc_hostname(card->host));
} else {
- pr_warning("%s: unable to read "
- "EXT_CSD, performance might "
- "suffer.\n",
+ pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
mmc_hostname(card->host));
err = 0;
}
@@ -309,8 +307,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
break;
default:
/* MMC v4 spec says this cannot happen */
- pr_warning("%s: card is mmc v4 but doesn't "
- "support any high-speed modes.\n",
+ pr_warn("%s: card is mmc v4 but doesn't support any high-speed modes\n",
mmc_hostname(card->host));
}
@@ -664,8 +661,8 @@ static int mmc_select_powerclass(struct mmc_card *card,
index = EXT_CSD_PWR_CL_200_360;
break;
default:
- pr_warning("%s: Voltage range not supported "
- "for power class.\n", mmc_hostname(host));
+ pr_warn("%s: Voltage range not supported for power class\n",
+ mmc_hostname(host));
return -EINVAL;
}
@@ -904,8 +901,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
goto free_card;
if (err) {
- pr_warning("%s: switch to highspeed failed\n",
- mmc_hostname(card->host));
+ pr_warn("%s: switch to highspeed failed\n",
+ mmc_hostname(card->host));
err = 0;
} else {
mmc_card_set_highspeed(card);
@@ -922,8 +919,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if (err && err != -EBADMSG)
goto free_card;
if (err) {
- pr_warning("%s: Enabling HPI failed\n",
- mmc_hostname(card->host));
+ pr_warn("%s: Enabling HPI failed\n",
+ mmc_hostname(card->host));
err = 0;
} else
card->ext_csd.hpi_en = 1;
@@ -1029,8 +1026,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
card->ext_csd.generic_cmd6_time);
}
if (err) {
- pr_warning("%s: switch to bus width %d ddr %d "
- "failed\n", mmc_hostname(card->host),
+ pr_warn("%s: switch to bus width %d ddr %d failed\n",
+ mmc_hostname(card->host),
1 << bus_width, ddr);
goto free_card;
} else if (ddr) {
@@ -1284,9 +1281,8 @@ int mmc_attach_mmc(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warning("%s: card claims to support voltages "
- "below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
+ mmc_hostname(host));
ocr &= ~0x7F;
}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 4d41fa9..32deb3e 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -415,8 +415,8 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
return -EBADMSG;
} else {
if (status & 0xFDFFA000)
- pr_warning("%s: unexpected status %#x after "
- "switch", mmc_hostname(card->host), status);
+ pr_warn("%s: unexpected status %#x after switch\n",
+ mmc_hostname(card->host), status);
if (status & R1_SWITCH_ERROR)
return -EBADMSG;
}
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index f54392c..52a1563 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -219,8 +219,8 @@ static int mmc_read_ssr(struct mmc_card *card)
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
- pr_warning("%s: card lacks mandatory SD Status "
- "function.\n", mmc_hostname(card->host));
+ pr_warn("%s: card lacks mandatory SD Status function\n",
+ mmc_hostname(card->host));
return 0;
}
@@ -230,8 +230,8 @@ static int mmc_read_ssr(struct mmc_card *card)
err = mmc_app_sd_status(card, ssr);
if (err) {
- pr_warning("%s: problem reading SD Status "
- "register.\n", mmc_hostname(card->host));
+ pr_warn("%s: problem reading SD Status register\n",
+ mmc_hostname(card->host));
err = 0;
goto out;
}
@@ -254,8 +254,8 @@ static int mmc_read_ssr(struct mmc_card *card)
card->ssr.erase_offset = eo * 1000;
}
} else {
- pr_warning("%s: SD Status: Invalid Allocation Unit "
- "size.\n", mmc_hostname(card->host));
+ pr_warn("%s: SD Status: Invalid Allocation Unit size\n",
+ mmc_hostname(card->host));
}
out:
kfree(ssr);
@@ -274,8 +274,7 @@ static int mmc_read_switch(struct mmc_card *card)
return 0;
if (!(card->csd.cmdclass & CCC_SWITCH)) {
- pr_warning("%s: card lacks mandatory switch "
- "function, performance might suffer.\n",
+ pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
mmc_hostname(card->host));
return 0;
}
@@ -300,7 +299,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warning("%s: problem reading Bus Speed modes.\n",
+ pr_warn("%s: problem reading Bus Speed modes.\n",
mmc_hostname(card->host));
err = 0;
@@ -323,8 +322,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warning("%s: problem reading "
- "Driver Strength.\n",
+ pr_warn("%s: problem reading Driver Strength\n",
mmc_hostname(card->host));
err = 0;
@@ -343,8 +341,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warning("%s: problem reading "
- "Current Limit.\n",
+ pr_warn("%s: problem reading Current Limit\n",
mmc_hostname(card->host));
err = 0;
@@ -394,8 +391,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
goto out;
if ((status[16] & 0xF) != 1) {
- pr_warning("%s: Problem switching card "
- "into high-speed mode!\n",
+ pr_warn("%s: Problem switching card into high-speed mode!\n",
mmc_hostname(card->host));
err = 0;
} else {
@@ -460,7 +456,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
return err;
if ((status[15] & 0xF) != drive_strength) {
- pr_warning("%s: Problem setting drive strength!\n",
+ pr_warn("%s: Problem setting drive strength!\n",
mmc_hostname(card->host));
return 0;
}
@@ -539,7 +535,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
return err;
if ((status[16] & 0xF) != card->sd_bus_speed)
- pr_warning("%s: Problem setting bus speed mode!\n",
+ pr_warn("%s: Problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
mmc_set_timing(card->host, timing);
@@ -601,7 +597,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
return err;
if (((status[15] >> 4) & 0x0F) != current_limit)
- pr_warning("%s: Problem setting current limit!\n",
+ pr_warn("%s: Problem setting current limit!\n",
mmc_hostname(card->host));
return 0;
@@ -853,9 +849,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
ro = host->ops->get_ro(host);
if (ro < 0) {
- pr_warning("%s: host does not "
- "support reading read-only "
- "switch. assuming write-enable.\n",
+ pr_warn("%s: host does not support reading read-only switch. assuming write-enable.\n",
mmc_hostname(host));
} else if (ro > 0) {
mmc_card_set_readonly(card);
@@ -1167,17 +1161,15 @@ int mmc_attach_sd(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warning("%s: card claims to support voltages "
- "below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
+ mmc_hostname(host));
ocr &= ~0x7F;
}
if ((ocr & MMC_VDD_165_195) &&
!(host->ocr_avail_sd & MMC_VDD_165_195)) {
- pr_warning("%s: SD card claims to support the "
- "incompletely defined 'low voltage range'. This "
- "will be ignored.\n", mmc_hostname(host));
+ pr_warn("%s: SD card claims to support the incompletely defined 'low voltage range'. This will be ignored.\n",
+ mmc_hostname(host));
ocr &= ~MMC_VDD_165_195;
}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 3ab565e..e994a89 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -777,9 +777,8 @@ int mmc_attach_sdio(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warning("%s: card claims to support voltages "
- "below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
+ mmc_hostname(host));
ocr &= ~0x7F;
}
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 40989e6..3d82f12 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -174,8 +174,8 @@ static int sdio_bus_remove(struct device *dev)
drv->remove(func);
if (func->irq_handler) {
- pr_warning("WARNING: driver %s did not remove "
- "its interrupt handler!\n", drv->name);
+ pr_warn("WARNING: driver %s did not remove its interrupt handler!\n",
+ drv->name);
sdio_claim_host(func);
sdio_release_irq(func);
sdio_release_host(func);
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index f1c7ed8..6536fce 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -313,10 +313,9 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
if (ret == -ENOENT) {
/* warn about unknown tuples */
- pr_warning("%s: queuing unknown"
- " CIS tuple 0x%02x (%u bytes)\n",
- mmc_hostname(card->host),
- tpl_code, tpl_link);
+ pr_warn("%s: queuing unknown CIS tuple 0x%02x (%u bytes)\n",
+ mmc_hostname(card->host),
+ tpl_code, tpl_link);
}
/* keep on analyzing tuples */
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 68f81b9..bc9e67a 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -56,16 +56,15 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
if (pending & (1 << i)) {
func = card->sdio_func[i - 1];
if (!func) {
- pr_warning("%s: pending IRQ for "
- "non-existent function\n",
+ pr_warn("%s: pending IRQ for non-existent function\n",
mmc_card_id(card));
ret = -EINVAL;
} else if (func->irq_handler) {
func->irq_handler(func);
count++;
} else {
- pr_warning("%s: pending IRQ with no handler\n",
- sdio_func_id(func));
+ pr_warn("%s: pending IRQ with no handler\n",
+ sdio_func_id(func));
ret = -EINVAL;
}
}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 50b5f99..0ea9935 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -466,9 +466,8 @@ static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
struct mmci_host_next *next = &host->next_data;
if (data->host_cookie && data->host_cookie != next->cookie) {
- pr_warning("[%s] invalid cookie: data->host_cookie %d"
- " host->next_data.cookie %d\n",
- __func__, data->host_cookie, host->next_data.cookie);
+ pr_warn("[%s] invalid cookie: data->host_cookie %d host->next_data.cookie %d\n",
+ __func__, data->host_cookie, host->next_data.cookie);
data->host_cookie = 0;
}
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index d5fe43d..1455bd6 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1422,9 +1422,8 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host,
if (!next && data->host_cookie &&
data->host_cookie != host->next_data.cookie) {
- pr_warning("[%s] invalid cookie: data->host_cookie %d"
- " host->next_data.cookie %d\n",
- __func__, data->host_cookie, host->next_data.cookie);
+ pr_warn("[%s] invalid cookie: data->host_cookie %d host->next_data.cookie %d\n",
+ __func__, data->host_cookie, host->next_data.cookie);
data->host_cookie = 0;
}
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 720f993..6da27c0 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -983,7 +983,8 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
* one block being transferred. */
if (data->blocks > 1) {
- pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
+ pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
+ __func__, data->blksz);
return -EINVAL;
}
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a7c2311..d146bff 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -677,8 +677,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
}
if (count >= 0xF) {
- pr_warning("%s: Too large timeout requested for CMD%d!\n",
- mmc_hostname(host->mmc), cmd->opcode);
+ pr_warn("%s: Too large timeout requested for CMD%d!\n",
+ mmc_hostname(host->mmc), cmd->opcode);
count = 0xE;
}
@@ -2237,8 +2237,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
if (host->runtime_suspended) {
spin_unlock(&host->lock);
- pr_warning("%s: got irq while runtime suspended\n",
- mmc_hostname(host->mmc));
+ pr_warn("%s: got irq while runtime suspended\n",
+ mmc_hostname(host->mmc));
return IRQ_HANDLED;
}
@@ -2585,8 +2585,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
- pr_warning("%s: No suitable DMA "
- "available. Falling back to PIO.\n",
+ pr_warn("%s: No suitable DMA available. Falling back to PIO.\n",
mmc_hostname(mmc));
host->flags &=
~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
@@ -2605,8 +2604,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (!host->adma_desc || !host->align_buffer) {
kfree(host->adma_desc);
kfree(host->align_buffer);
- pr_warning("%s: Unable to allocate ADMA "
- "buffers. Falling back to standard DMA.\n",
+ pr_warn("%s: Unable to allocate ADMA buffers. Falling back to standard DMA.\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
}
@@ -2895,8 +2893,8 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
SDHCI_MAX_BLOCK_SHIFT;
if (mmc->max_blk_size >= 3) {
- pr_warning("%s: Invalid maximum block size, "
- "assuming 512 bytes\n", mmc_hostname(mmc));
+ pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
+ mmc_hostname(mmc));
mmc->max_blk_size = 0;
}
}
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index f70d046..55d6c60 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -952,8 +952,7 @@ static int tifm_sd_probe(struct tifm_dev *sock)
if (!(TIFM_SOCK_STATE_OCCUPIED
& readl(sock->addr + SOCK_PRESENT_STATE))) {
- pr_warning("%s : card gone, unexpectedly\n",
- dev_name(&sock->dev));
+ pr_warn("%s : card gone, unexpectedly\n", dev_name(&sock->dev));
return rc;
}
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 64acd9c..a4944c8e 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -803,8 +803,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
default:
#ifdef CONFIG_MMC_DEBUG
- pr_warning("%s: Data command %d is not "
- "supported by this controller.\n",
+ pr_warn("%s: Data command %d is not supported by this controller\n",
mmc_hostname(host->mmc), cmd->opcode);
#endif
cmd->error = -EINVAL;
@@ -1429,8 +1428,8 @@ free:
free_dma(dma);
err:
- pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. "
- "Falling back on FIFO.\n", dma);
+ pr_warn(DRIVER_NAME ": Unable to allocate DMA %d. Falling back on FIFO.\n",
+ dma);
}
static void wbsd_release_dma(struct wbsd_host *host)
@@ -1664,9 +1663,8 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
ret = wbsd_scan(host);
if (ret) {
if (pnp && (ret == -ENODEV)) {
- pr_warning(DRIVER_NAME
- ": Unable to confirm device presence. You may "
- "experience lock-ups.\n");
+ pr_warn(DRIVER_NAME
+ ": Unable to confirm device presence. You may experience lock-ups.\n");
} else {
wbsd_free_mmc(dev);
return ret;
@@ -1688,10 +1686,8 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
*/
if (pnp) {
if ((host->config != 0) && !wbsd_chip_validate(host)) {
- pr_warning(DRIVER_NAME
- ": PnP active but chip not configured! "
- "You probably have a buggy BIOS. "
- "Configuring chip manually.\n");
+ pr_warn(DRIVER_NAME
+ ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
wbsd_chip_config(host);
}
} else
@@ -1909,10 +1905,8 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev)
*/
if (host->config != 0) {
if (!wbsd_chip_validate(host)) {
- pr_warning(DRIVER_NAME
- ": PnP active but chip not configured! "
- "You probably have a buggy BIOS. "
- "Configuring chip manually.\n");
+ pr_warn(DRIVER_NAME
+ ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
wbsd_chip_config(host);
}
}
--
1.7.6.405.gc1be0
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 2/4] wbsd: Use current logging
2011-11-15 23:32 [PATCH 0/4] mmc: logging neatening and mmc_host_<level> Joe Perches
2011-11-15 23:32 ` [PATCH 1/4] mmc: Update logging style Joe Perches
@ 2011-11-15 23:32 ` Joe Perches
2011-11-16 1:23 ` NamJae Jeon
2011-11-15 23:32 ` [PATCH 3/4] mmc: Logging neatening Joe Perches
2011-11-15 23:32 ` [PATCH 4/4] mmc: Add mmc_host_<level> logging Joe Perches
3 siblings, 1 reply; 19+ messages in thread
From: Joe Perches @ 2011-11-15 23:32 UTC (permalink / raw)
To: Pierre Ossman; +Cc: Chris Ball, linux-mmc, linux-kernel
Add pr_fmt.
Remove DRIVER_NAME from logging calls.
Remove DBG, use pr_debug.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mmc/host/wbsd.c | 36 ++++++++++++++++--------------------
1 files changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index a4944c8e..deaed8c 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -22,6 +22,8 @@
* - On APIC systems the FIFO empty interrupt is sometimes lost.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
@@ -43,10 +45,8 @@
#define DRIVER_NAME "wbsd"
-#define DBG(x...) \
- pr_debug(DRIVER_NAME ": " x)
-#define DBGF(f, x...) \
- pr_debug(DRIVER_NAME " [%s()]: " f, __func__ , ##x)
+#define DBGF(fmt, ...) \
+ pr_debug("[%s()]: " fmt, __func__, ##__VA_ARGS__)
/*
* Device resources
@@ -964,7 +964,7 @@ static void wbsd_reset_ignore(unsigned long data)
BUG_ON(host == NULL);
- DBG("Resetting card detection ignore\n");
+ pr_debug("Resetting card detection ignore\n");
spin_lock_bh(&host->lock);
@@ -1018,13 +1018,13 @@ static void wbsd_tasklet_card(unsigned long param)
if (csr & WBSD_CARDPRESENT) {
if (!(host->flags & WBSD_FCARD_PRESENT)) {
- DBG("Card inserted\n");
+ pr_debug("Card inserted\n");
host->flags |= WBSD_FCARD_PRESENT;
delay = 500;
}
} else if (host->flags & WBSD_FCARD_PRESENT) {
- DBG("Card removed\n");
+ pr_debug("Card removed\n");
host->flags &= ~WBSD_FCARD_PRESENT;
if (host->mrq) {
@@ -1325,8 +1325,8 @@ static int __devinit wbsd_scan(struct wbsd_host *host)
}
if (id != 0xFFFF) {
- DBG("Unknown hardware (id %x) found at %x\n",
- id, config_ports[i]);
+ pr_debug("Unknown hardware (id %x) found at %x\n",
+ id, config_ports[i]);
}
}
@@ -1428,7 +1428,7 @@ free:
free_dma(dma);
err:
- pr_warn(DRIVER_NAME ": Unable to allocate DMA %d. Falling back on FIFO.\n",
+ pr_warn("Unable to allocate DMA %d. Falling back on FIFO.\n",
dma);
}
@@ -1663,8 +1663,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
ret = wbsd_scan(host);
if (ret) {
if (pnp && (ret == -ENODEV)) {
- pr_warn(DRIVER_NAME
- ": Unable to confirm device presence. You may experience lock-ups.\n");
+ pr_warn("Unable to confirm device presence. You may experience lock-ups.\n");
} else {
wbsd_free_mmc(dev);
return ret;
@@ -1686,8 +1685,7 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
*/
if (pnp) {
if ((host->config != 0) && !wbsd_chip_validate(host)) {
- pr_warn(DRIVER_NAME
- ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
+ pr_warn("PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
wbsd_chip_config(host);
}
} else
@@ -1905,8 +1903,7 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev)
*/
if (host->config != 0) {
if (!wbsd_chip_validate(host)) {
- pr_warn(DRIVER_NAME
- ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
+ pr_warn("PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
wbsd_chip_config(host);
}
}
@@ -1967,9 +1964,8 @@ static int __init wbsd_drv_init(void)
{
int result;
- pr_info(DRIVER_NAME
- ": Winbond W83L51xD SD/MMC card interface driver\n");
- pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
+ pr_info("Winbond W83L51xD SD/MMC card interface driver\n");
+ pr_info("Copyright(c) Pierre Ossman\n");
#ifdef CONFIG_PNP
@@ -2017,7 +2013,7 @@ static void __exit wbsd_drv_exit(void)
platform_driver_unregister(&wbsd_driver);
}
- DBG("unloaded\n");
+ pr_debug("unloaded\n");
}
module_init(wbsd_drv_init);
--
1.7.6.405.gc1be0
^ permalink raw reply [flat|nested] 19+ messages in thread* [PATCH 3/4] mmc: Logging neatening
2011-11-15 23:32 [PATCH 0/4] mmc: logging neatening and mmc_host_<level> Joe Perches
2011-11-15 23:32 ` [PATCH 1/4] mmc: Update logging style Joe Perches
2011-11-15 23:32 ` [PATCH 2/4] wbsd: Use current logging Joe Perches
@ 2011-11-15 23:32 ` Joe Perches
2011-11-16 1:48 ` NamJae Jeon
2011-11-15 23:32 ` [PATCH 4/4] mmc: Add mmc_host_<level> logging Joe Perches
3 siblings, 1 reply; 19+ messages in thread
From: Joe Perches @ 2011-11-15 23:32 UTC (permalink / raw)
To: Nicolas Ferre, Manuel Lauss, Cliff Cai, Nicolas Pitre,
Chris Ball, Sascha Sommer, Alex Dubov, Bruce Chang, Harald Welte,
Tony Olech, Pierre Ossman
Cc: linux-mmc, linux-kernel, linux-arm-kernel, uclinux-dist-devel,
linux-omap, linux-usb
Coalesce formats.
Align arguments.
Add pr_fmt, remove prefixes from format strings.
Neaten DBG uses, rearrange argument order.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mmc/card/mmc_test.c | 49 +++++-------
drivers/mmc/core/core.c | 52 ++++++------
drivers/mmc/core/host.c | 3 +-
drivers/mmc/core/mmc.c | 22 ++---
drivers/mmc/core/mmc_ops.c | 5 +-
drivers/mmc/core/sd.c | 25 +++---
drivers/mmc/core/sdio_bus.c | 2 +
drivers/mmc/core/sdio_io.c | 14 ++--
drivers/mmc/core/sdio_irq.c | 10 ++-
drivers/mmc/host/at91_mci.c | 3 +-
drivers/mmc/host/au1xmmc.c | 35 ++++----
drivers/mmc/host/bfin_sdh.c | 3 +-
drivers/mmc/host/dw_mmc.c | 16 ++--
drivers/mmc/host/mmc_spi.c | 9 +-
drivers/mmc/host/mmci.c | 3 +-
drivers/mmc/host/mvsdio.c | 33 ++++----
drivers/mmc/host/omap_hsmmc.c | 11 +--
drivers/mmc/host/sdhci-pci.c | 17 ++---
drivers/mmc/host/sdhci-pxav3.c | 7 +-
drivers/mmc/host/sdhci.c | 175 ++++++++++++++++++---------------------
drivers/mmc/host/sdricoh_cs.c | 12 ++--
drivers/mmc/host/tifm_sd.c | 9 +-
drivers/mmc/host/via-sdmmc.c | 22 +++---
drivers/mmc/host/vub300.c | 54 ++++++-------
drivers/mmc/host/wbsd.c | 5 +-
25 files changed, 277 insertions(+), 319 deletions(-)
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index b038c4a..f079555 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -9,6 +9,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/mmc/core.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
@@ -251,8 +253,7 @@ static int mmc_test_wait_busy(struct mmc_test_card *test)
if (!busy && mmc_test_busy(&cmd)) {
busy = 1;
if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
- pr_info("%s: Warning: Host did not "
- "wait for busy state to end.\n",
+ pr_info("%s: Warning: Host did not wait for busy state to end\n",
mmc_hostname(test->card->host));
}
} while (mmc_test_busy(&cmd));
@@ -553,12 +554,11 @@ static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes,
rate = mmc_test_rate(bytes, &ts);
iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
- pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
- "seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
- mmc_hostname(test->card->host), sectors, sectors >> 1,
- (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
- (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
- iops / 100, iops % 100);
+ pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
+ mmc_hostname(test->card->host), sectors, sectors >> 1,
+ (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
+ (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
+ iops / 100, iops % 100);
mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops);
}
@@ -579,14 +579,12 @@ static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes,
rate = mmc_test_rate(tot, &ts);
iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
- pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
- "%lu.%09lu seconds (%u kB/s, %u KiB/s, "
- "%u.%02u IOPS, sg_len %d)\n",
- mmc_hostname(test->card->host), count, sectors, count,
- sectors >> 1, (sectors & 1 ? ".5" : ""),
- (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
- rate / 1000, rate / 1024, iops / 100, iops % 100,
- test->area.sg_len);
+ pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS, sg_len %d)\n",
+ mmc_hostname(test->card->host), count, sectors, count,
+ sectors >> 1, (sectors & 1 ? ".5" : ""),
+ (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
+ rate / 1000, rate / 1024, iops / 100, iops % 100,
+ test->area.sg_len);
mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops);
}
@@ -1410,7 +1408,7 @@ static int mmc_test_multi_read_high(struct mmc_test_card *test)
static int mmc_test_no_highmem(struct mmc_test_card *test)
{
pr_info("%s: Highmem not configured - test skipped\n",
- mmc_hostname(test->card->host));
+ mmc_hostname(test->card->host));
return 0;
}
@@ -1437,7 +1435,7 @@ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz,
}
if (err)
pr_info("%s: Failed to map sg list\n",
- mmc_hostname(test->card->host));
+ mmc_hostname(test->card->host));
return err;
}
@@ -2709,8 +2707,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
if (mmc_test_cases[i].prepare) {
ret = mmc_test_cases[i].prepare(test);
if (ret) {
- pr_info("%s: Result: Prepare "
- "stage failed! (%d)\n",
+ pr_info("%s: Result: Prepare stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
continue;
@@ -2747,13 +2744,11 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_HOST:
- pr_info("%s: Result: UNSUPPORTED "
- "(by host)\n",
+ pr_info("%s: Result: UNSUPPORTED (by host)\n",
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_CARD:
- pr_info("%s: Result: UNSUPPORTED "
- "(by card)\n",
+ pr_info("%s: Result: UNSUPPORTED (by card)\n",
mmc_hostname(test->card->host));
break;
default:
@@ -2768,8 +2763,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
if (mmc_test_cases[i].cleanup) {
ret = mmc_test_cases[i].cleanup(test);
if (ret) {
- pr_info("%s: Warning: Cleanup "
- "stage failed! (%d)\n",
+ pr_info("%s: Warning: Cleanup stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
}
@@ -2778,8 +2772,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
mmc_release_host(test->card->host);
- pr_info("%s: Tests completed.\n",
- mmc_hostname(test->card->host));
+ pr_info("%s: Tests completed\n", mmc_hostname(test->card->host));
}
static void mmc_test_free_result(struct mmc_card *card)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 54d6a13..39e1311 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -10,6 +10,9 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -153,22 +156,22 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
led_trigger_event(host->led, LED_OFF);
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), cmd->opcode, err,
- cmd->resp[0], cmd->resp[1],
- cmd->resp[2], cmd->resp[3]);
+ mmc_hostname(host), cmd->opcode, err,
+ cmd->resp[0], cmd->resp[1],
+ cmd->resp[2], cmd->resp[3]);
if (mrq->data) {
pr_debug("%s: %d bytes transferred: %d\n",
- mmc_hostname(host),
- mrq->data->bytes_xfered, mrq->data->error);
+ mmc_hostname(host),
+ mrq->data->bytes_xfered, mrq->data->error);
}
if (mrq->stop) {
pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), mrq->stop->opcode,
- mrq->stop->error,
- mrq->stop->resp[0], mrq->stop->resp[1],
- mrq->stop->resp[2], mrq->stop->resp[3]);
+ mmc_hostname(host), mrq->stop->opcode,
+ mrq->stop->error,
+ mrq->stop->resp[0], mrq->stop->resp[1],
+ mrq->stop->resp[2], mrq->stop->resp[3]);
}
if (mrq->done)
@@ -193,12 +196,11 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
mrq->cmd->arg, mrq->cmd->flags);
if (mrq->data) {
- pr_debug("%s: blksz %d blocks %d flags %08x "
- "tsac %d ms nsac %d\n",
- mmc_hostname(host), mrq->data->blksz,
- mrq->data->blocks, mrq->data->flags,
- mrq->data->timeout_ns / 1000000,
- mrq->data->timeout_clks);
+ pr_debug("%s: blksz %d blocks %d flags %08x tsac %d ms nsac %d\n",
+ mmc_hostname(host), mrq->data->blksz,
+ mrq->data->blocks, mrq->data->flags,
+ mrq->data->timeout_ns / 1000000,
+ mrq->data->timeout_clks);
}
if (mrq->stop) {
@@ -842,8 +844,7 @@ static inline void mmc_set_ios(struct mmc_host *host)
{
struct mmc_ios *ios = &host->ios;
- pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
- "width %u timing %u\n",
+ pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
mmc_hostname(host), ios->clock, ios->bus_mode,
ios->power_mode, ios->chip_select, ios->vdd,
ios->bus_width, ios->timing);
@@ -1310,8 +1311,7 @@ void mmc_power_off(struct mmc_host *host)
notify_type, timeout);
if (err && err != -EBADMSG)
- pr_err("Device failed to respond within %d poweroff "
- "time. Forcefully powering down the device\n",
+ pr_err("Device failed to respond within %d poweroff time. Forcefully powering down the device.\n",
timeout);
/* Set the card state to no notification after the poweroff */
@@ -1642,8 +1642,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- pr_err("mmc_erase: group start error %d, "
- "status %#x\n", err, cmd.resp[0]);
+ pr_err("mmc_erase: group start error %d, status %#x\n",
+ err, cmd.resp[0]);
err = -EIO;
goto out;
}
@@ -1688,7 +1688,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err || (cmd.resp[0] & 0xFDF92000)) {
pr_err("error %d requesting status %#x\n",
- err, cmd.resp[0]);
+ err, cmd.resp[0]);
err = -EIO;
goto out;
}
@@ -2245,7 +2245,7 @@ int mmc_flush_cache(struct mmc_card *card)
EXT_CSD_FLUSH_CACHE, 1, 0);
if (err)
pr_err("%s: cache flush error %d\n",
- mmc_hostname(card->host), err);
+ mmc_hostname(card->host), err);
}
return err;
@@ -2275,9 +2275,9 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
EXT_CSD_CACHE_CTRL, enable, 0);
if (err)
pr_err("%s: cache %s error %d\n",
- mmc_hostname(card->host),
- enable ? "on" : "off",
- err);
+ mmc_hostname(card->host),
+ enable ? "on" : "off",
+ err);
else
card->ext_csd.cache_ctrl = enable;
}
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 835e86a..7f963c0 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -94,8 +94,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
unsigned long flags;
if (!freq) {
- pr_debug("%s: frequency set to 0 in disable function, "
- "this means the clock is already disabled.\n",
+ pr_debug("%s: frequency set to 0 in disable function, this means the clock is already disabled\n",
mmc_hostname(host));
return;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index bbd7adb..f6db788 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -196,8 +196,8 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
*/
ext_csd = kmalloc(512, GFP_KERNEL);
if (!ext_csd) {
- pr_err("%s: could not allocate a buffer to "
- "receive the ext_csd.\n", mmc_hostname(card->host));
+ pr_err("%s: could not allocate a buffer to receive the ext_csd\n",
+ mmc_hostname(card->host));
return -ENOMEM;
}
@@ -218,10 +218,8 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
* stored in their CSD.
*/
if (card->csd.capacity == (4096 * 512)) {
- pr_err("%s: unable to read EXT_CSD "
- "on a possible high capacity card. "
- "Card will be ignored.\n",
- mmc_hostname(card->host));
+ pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
+ mmc_hostname(card->host));
} else {
pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
mmc_hostname(card->host));
@@ -251,9 +249,9 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
if (card->ext_csd.raw_ext_csd_structure > 2) {
- pr_err("%s: unrecognised EXT_CSD structure "
- "version %d\n", mmc_hostname(card->host),
- card->ext_csd.raw_ext_csd_structure);
+ pr_err("%s: unrecognised EXT_CSD structure version %d\n",
+ mmc_hostname(card->host),
+ card->ext_csd.raw_ext_csd_structure);
err = -EINVAL;
goto out;
}
@@ -984,8 +982,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
- pr_err("%s: power class selection to "
- "bus width %d failed\n",
+ pr_err("%s: power class selection to bus width %d failed\n",
mmc_hostname(card->host),
1 << bus_width);
@@ -1015,8 +1012,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
- pr_err("%s: power class selection to "
- "bus width %d ddr %d failed\n",
+ pr_err("%s: power class selection to bus width %d ddr %d failed\n",
mmc_hostname(card->host),
1 << bus_width, ddr);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 32deb3e..7c7388c 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -569,9 +569,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- pr_warn("%s: error %d interrupting operation. "
- "HPI command response %#x\n", mmc_hostname(card->host),
- err, cmd.resp[0]);
+ pr_warn("%s: error %d interrupting operation. HPI command response %#x\n",
+ mmc_hostname(card->host), err, cmd.resp[0]);
return err;
}
if (status)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 52a1563..1492b7b 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/stat.h>
@@ -283,9 +285,8 @@ static int mmc_read_switch(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for "
- "switch capabilities.\n",
- mmc_hostname(card->host));
+ pr_err("%s: could not allocate a buffer for switch capabilities\n",
+ mmc_hostname(card->host));
return -ENOMEM;
}
@@ -299,7 +300,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warn("%s: problem reading Bus Speed modes.\n",
+ pr_warn("%s: problem reading Bus Speed modes\n",
mmc_hostname(card->host));
err = 0;
@@ -381,8 +382,8 @@ int mmc_sd_switch_hs(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for "
- "switch capabilities.\n", mmc_hostname(card->host));
+ pr_err("%s: could not allocate a buffer for switch capabilities\n",
+ mmc_hostname(card->host));
return -ENOMEM;
}
@@ -391,7 +392,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
goto out;
if ((status[16] & 0xF) != 1) {
- pr_warn("%s: Problem switching card into high-speed mode!\n",
+ pr_warn("%s: problem switching card into high-speed mode!\n",
mmc_hostname(card->host));
err = 0;
} else {
@@ -456,7 +457,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
return err;
if ((status[15] & 0xF) != drive_strength) {
- pr_warn("%s: Problem setting drive strength!\n",
+ pr_warn("%s: problem setting drive strength!\n",
mmc_hostname(card->host));
return 0;
}
@@ -535,7 +536,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
return err;
if ((status[16] & 0xF) != card->sd_bus_speed)
- pr_warn("%s: Problem setting bus speed mode!\n",
+ pr_warn("%s: problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
mmc_set_timing(card->host, timing);
@@ -597,7 +598,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
return err;
if (((status[15] >> 4) & 0x0F) != current_limit)
- pr_warn("%s: Problem setting current limit!\n",
+ pr_warn("%s: problem setting current limit!\n",
mmc_hostname(card->host));
return 0;
@@ -619,8 +620,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for "
- "switch capabilities.\n", mmc_hostname(card->host));
+ pr_err("%s: could not allocate a buffer for switch capabilities\n",
+ mmc_hostname(card->host));
return -ENOMEM;
}
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 3d82f12..57ce052 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -11,6 +11,8 @@
* SDIO function driver model
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 8f6f5ac..7c87732 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -9,6 +9,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/export.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -65,7 +67,7 @@ int sdio_enable_func(struct sdio_func *func)
BUG_ON(!func);
BUG_ON(!func->card);
- pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func));
+ pr_debug("Enabling device %s...\n", sdio_func_id(func));
ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®);
if (ret)
@@ -90,12 +92,12 @@ int sdio_enable_func(struct sdio_func *func)
goto err;
}
- pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func));
+ pr_debug("Enabled device %s\n", sdio_func_id(func));
return 0;
err:
- pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func));
+ pr_debug("Failed to enable device %s\n", sdio_func_id(func));
return ret;
}
EXPORT_SYMBOL_GPL(sdio_enable_func);
@@ -115,7 +117,7 @@ int sdio_disable_func(struct sdio_func *func)
BUG_ON(!func);
BUG_ON(!func->card);
- pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func));
+ pr_debug("Disabling device %s...\n", sdio_func_id(func));
ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®);
if (ret)
@@ -127,12 +129,12 @@ int sdio_disable_func(struct sdio_func *func)
if (ret)
goto err;
- pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func));
+ pr_debug("Disabled device %s\n", sdio_func_id(func));
return 0;
err:
- pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func));
+ pr_debug("Failed to disable device %s\n", sdio_func_id(func));
return -EIO;
}
EXPORT_SYMBOL_GPL(sdio_disable_func);
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index bc9e67a..533d0e5 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -13,6 +13,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/kthread.h>
@@ -47,7 +49,7 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
if (ret) {
pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
- mmc_card_id(card), ret);
+ mmc_card_id(card), ret);
return ret;
}
@@ -233,10 +235,10 @@ int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
BUG_ON(!func);
BUG_ON(!func->card);
- pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
+ pr_debug("Enabling IRQ for %s...\n", sdio_func_id(func));
if (func->irq_handler) {
- pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
+ pr_debug("IRQ for %s already in use\n", sdio_func_id(func));
return -EBUSY;
}
@@ -276,7 +278,7 @@ int sdio_release_irq(struct sdio_func *func)
BUG_ON(!func);
BUG_ON(!func->card);
- pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
+ pr_debug("Disabling IRQ for %s...\n", sdio_func_id(func));
if (func->irq_handler) {
func->irq_handler = NULL;
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index f437c3e..d63f453 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -968,8 +968,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
if (at91mci_is_mci1rev2xx())
mmc->caps |= MMC_CAP_4_BIT_DATA;
else
- dev_warn(&pdev->dev, "4 wire bus mode not supported"
- " - using 1 wire\n");
+ dev_warn(&pdev->dev, "4 wire bus mode not supported - using 1 wire\n");
}
host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE,
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index dbd0c8a..cfd325d 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -32,6 +32,8 @@
* (the low to high transition will not occur).
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -54,10 +56,11 @@
/* #define DEBUG */
#ifdef DEBUG
-#define DBG(fmt, idx, args...) \
- pr_debug("au1xmmc(%d): DEBUG: " fmt, idx, ##args)
+#define DBG(idx, fmt, ...) \
+ pr_debug("(%d): DEBUG: " fmt, idx, ##__VA_ARGS__)
#else
-#define DBG(fmt, idx, args...) do {} while (0)
+#define DBG(idx, fmt, ...) \
+ no_printk(fmt, ##__VA_ARGS__)
#endif
/* Hardware definitions */
@@ -277,8 +280,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
mmccmd |= SD_CMD_RT_3;
break;
default:
- pr_info("au1xmmc: unhandled response type %02x\n",
- mmc_resp_type(cmd));
+ pr_info("unhandled response type %02x\n", mmc_resp_type(cmd));
return -EINVAL;
}
@@ -478,19 +480,19 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
break;
if (status & SD_STATUS_RC) {
- DBG("RX CRC Error [%d + %d].\n", host->pdev->id,
- host->pio.len, count);
+ DBG(host->pdev->id, "RX CRC Error [%d + %d]\n",
+ host->pio.len, count);
break;
}
if (status & SD_STATUS_RO) {
- DBG("RX Overrun [%d + %d]\n", host->pdev->id,
- host->pio.len, count);
+ DBG(host->pdev->id, "RX Overrun [%d + %d]\n",
+ host->pio.len, count);
break;
}
else if (status & SD_STATUS_RU) {
- DBG("RX Underrun [%d + %d]\n", host->pdev->id,
- host->pio.len, count);
+ DBG(host->pdev->id, "RX Underrun [%d + %d]\n",
+ host->pio.len, count);
break;
}
@@ -835,8 +837,7 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
au1xmmc_receive_pio(host);
} else if (status & 0x203F3C70) {
- DBG("Unhandled status %8.8x\n", host->pdev->id,
- status);
+ DBG(host->pdev->id, "Unhandled status %8.8x\n", status);
}
au_writel(status, HOST_STATUS(host));
@@ -1050,7 +1051,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
if (has_dbdma()) {
ret = au1xmmc_dbdma_init(host);
if (ret)
- pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
+ pr_info("DBDMA init failed; using PIO\n");
}
#ifdef CONFIG_LEDS_CLASS
@@ -1075,8 +1076,8 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
- pr_info(DRIVER_NAME ": MMC Controller %d set up at %8.8X"
- " (mode=%s)\n", pdev->id, host->iobase,
+ pr_info("MMC Controller %d set up at %8.8X (mode=%s)\n",
+ pdev->id, host->iobase,
host->flags & HOST_F_DMA ? "dma" : "pio");
return 0; /* all ok */
@@ -1206,7 +1207,7 @@ static int __init au1xmmc_init(void)
*/
memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
if (!memid)
- pr_err("au1xmmc: cannot add memory dbdma\n");
+ pr_err("cannot add memory dbdma\n");
}
return platform_driver_register(&au1xmmc_driver);
}
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index 0371bf5..780a1eb 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -162,8 +162,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
host->sg_cpu[i].cfg = dma_cfg;
host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
host->sg_cpu[i].x_modify = 4;
- dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
- "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
+ dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
i, host->sg_cpu[i].start_addr,
host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
host->sg_cpu[i].x_modify);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 3aaeb08..5d34c01 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -554,8 +554,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
div = (host->bus_hz / slot->clock) >> 1;
dev_info(&slot->mmc->class_dev,
- "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
- " div = %d)\n", slot->id, host->bus_hz, slot->clock,
+ "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
+ slot->id, host->bus_hz, slot->clock,
div ? ((host->bus_hz / div) >> 1) : host->bus_hz, div);
/* disable clock */
@@ -942,8 +942,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
data->error = -ETIMEDOUT;
} else {
dev_err(&host->pdev->dev,
- "data FIFO error "
- "(status=%08x)\n",
+ "data FIFO error (status=%08x)\n",
status);
data->error = -EIO;
}
@@ -1776,8 +1775,8 @@ static void dw_mci_init_dma(struct dw_mci *host)
if (host->dma_ops->init) {
if (host->dma_ops->init(host)) {
- dev_err(&host->pdev->dev, "%s: Unable to initialize "
- "DMA Controller.\n", __func__);
+ dev_err(&host->pdev->dev, "%s: Unable to initialize DMA Controller\n",
+ __func__);
goto no_dma;
}
} else {
@@ -1985,9 +1984,8 @@ static int dw_mci_probe(struct platform_device *pdev)
DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
- dev_info(&pdev->dev, "DW MMC controller at irq %d, "
- "%d bit host data width, "
- "%u deep fifo\n",
+ dev_info(&pdev->dev,
+ "DW MMC controller at irq %d, %d bit host data width, %u deep fifo\n",
irq, width, fifo_size);
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
dev_info(&pdev->dev, "Internal DMAC interrupt fix enabled.\n");
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 92946b8..f77899f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -860,9 +860,9 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
be16_to_cpus(&scratch->crc_val);
if (scratch->crc_val != crc) {
- dev_dbg(&spi->dev, "read - crc error: crc_val=0x%04x, "
- "computed=0x%04x len=%d\n",
- scratch->crc_val, crc, t->len);
+ dev_dbg(&spi->dev,
+ "read - crc error: crc_val=0x%04x, computed=0x%04x len=%d\n",
+ scratch->crc_val, crc, t->len);
return -EILSEQ;
}
}
@@ -1253,8 +1253,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
mres = spi_setup(host->spi);
if (mres < 0)
dev_dbg(&host->spi->dev,
- "switch back to SPI mode 3"
- " failed\n");
+ "switch back to SPI mode 3 failed\n");
}
}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0ea9935..33b3cd1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1229,8 +1229,7 @@ static int __devinit mmci_probe(struct amba_device *dev,
host->mmc->ocr_avail = (u32) mask;
if (plat->ocr_mask)
dev_warn(&dev->dev,
- "Provided ocr_mask/setpower will not be used "
- "(using regulator instead)\n");
+"Provided ocr_mask/setpower will not be used (using regulator instead)\n");
}
}
#endif
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 211a495..93012a0 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -84,9 +84,9 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
hw_state = mvsd_read(MVSD_HW_STATE);
count++;
} while (!(hw_state & (1 << 13)));
- dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit "
- "(hw=0x%04x, count=%d, jiffies=%ld)\n",
- hw_state, count, jiffies - (t - HZ));
+ dev_dbg(host->dev,
+"*** wait for FIFO_EMPTY bit (hw=0x%04x, count=%d, jiffies=%ld)\n",
+ hw_state, count, jiffies - (t - HZ));
}
/* If timeout=0 then maximum timeout index is used. */
@@ -117,10 +117,9 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
if (!nodma)
- pr_debug("%s: fallback to PIO for data "
- "at 0x%p size %d\n",
- mmc_hostname(host->mmc),
- host->pio_ptr, host->pio_size);
+ pr_debug("%s: fallback to PIO for data at 0x%p size %d\n",
+ mmc_hostname(host->mmc),
+ host->pio_ptr, host->pio_size);
return 1;
} else {
dma_addr_t phys_addr;
@@ -489,9 +488,9 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
if (irq_handled)
return IRQ_HANDLED;
- pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
- "pio=%d\n", mmc_hostname(host->mmc), intr_status,
- host->intr_en, host->pio_size);
+ pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
+ mmc_hostname(host->mmc), intr_status,
+ host->intr_en, host->pio_size);
return IRQ_NONE;
}
@@ -505,13 +504,13 @@ static void mvsd_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
mrq = host->mrq;
if (mrq) {
- pr_err("%s: Timeout waiting for hardware interrupt.\n",
- mmc_hostname(host->mmc));
- pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
- "intr_en=0x%04x\n", mmc_hostname(host->mmc),
- mvsd_read(MVSD_HW_STATE),
- mvsd_read(MVSD_NOR_INTR_STATUS),
- mvsd_read(MVSD_NOR_INTR_EN));
+ pr_err("%s: Timeout waiting for hardware interrupt\n",
+ mmc_hostname(host->mmc));
+ pr_err("%s: hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
+ mmc_hostname(host->mmc),
+ mvsd_read(MVSD_HW_STATE),
+ mvsd_read(MVSD_NOR_INTR_STATUS),
+ mvsd_read(MVSD_NOR_INTR_EN));
host->mrq = NULL;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 1455bd6..dd5159b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1264,9 +1264,8 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
host->reqs_blocked = 0;
if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
if (host->protect_card) {
- pr_info("%s: cover is closed, "
- "card is now accessible\n",
- mmc_hostname(host->mmc));
+ pr_info("%s: cover is closed, card is now accessible\n",
+ mmc_hostname(host->mmc));
host->protect_card = 0;
}
} else {
@@ -1967,8 +1966,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
if (host->got_dbclk)
if (clk_enable(host->dbclk) != 0)
- dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
- " clk failed\n");
+ dev_dbg(mmc_dev(host->mmc), "Enabling debounce clk failed\n");
}
/* Since we do only SG emulation, we can have as many segs
@@ -2169,8 +2167,7 @@ static int omap_hsmmc_suspend(struct device *dev)
host->slot_id);
if (ret) {
dev_dbg(mmc_dev(host->mmc),
- "Unable to handle MMC board"
- " level suspend\n");
+ "Unable to handle MMC board level suspend\n");
host->suspended = 0;
return ret;
}
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 6878a94..67c5751 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -460,8 +460,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
if (sd_dev) {
pci_dev_put(sd_dev);
- dev_info(&chip->pdev->dev, "Refusing to bind to "
- "secondary interface.\n");
+ dev_info(&chip->pdev->dev, "Refusing to bind to secondary interface\n");
return -ENODEV;
}
}
@@ -628,10 +627,10 @@ static int syskt_probe_slot(struct sdhci_pci_slot *slot)
u8 board_rev = readb(slot->host->ioaddr + SYSKT_BOARD_REV);
u8 chip_rev = readb(slot->host->ioaddr + SYSKT_CHIP_REV);
- dev_info(&slot->chip->pdev->dev, "SysKonnect CardBus2SDIO, "
- "board rev %d.%d, chip rev %d.%d\n",
- board_rev >> 4, board_rev & 0xf,
- chip_rev >> 4, chip_rev & 0xf);
+ dev_info(&slot->chip->pdev->dev,
+ "SysKonnect CardBus2SDIO, board rev %d.%d, chip rev %d.%d\n",
+ board_rev >> 4, board_rev & 0xf,
+ chip_rev >> 4, chip_rev & 0xf);
if (chip_rev >= 0x20)
slot->host->quirks |= SDHCI_QUIRK_FORCE_DMA;
@@ -925,8 +924,7 @@ static int sdhci_pci_enable_dma(struct sdhci_host *host)
if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) &&
((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
(host->flags & SDHCI_USE_SDMA)) {
- dev_warn(&pdev->dev, "Will use DMA mode even though HW "
- "doesn't fully claim to support it.\n");
+ dev_warn(&pdev->dev, "Will use DMA mode even though HW doesn't fully claim to support it\n");
}
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
@@ -1202,8 +1200,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
}
if (pci_resource_len(pdev, bar) != 0x100) {
- dev_err(&pdev->dev, "Invalid iomem size. You may "
- "experience problems.\n");
+ dev_err(&pdev->dev, "Invalid iomem size. You may experience problems.\n");
}
if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 15673a7..0d8f061 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -82,11 +82,8 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
&& power_mode == MMC_POWER_ON) {
dev_dbg(mmc_dev(host->mmc),
- "%s: slot->power_mode = %d,"
- "ios->power_mode = %d\n",
- __func__,
- pxa->power_mode,
- power_mode);
+ "%s: slot->power_mode = %d, ios->power_mode = %d\n",
+ __func__, pxa->power_mode, power_mode);
/* set we want notice of when 74 clocks are sent */
tmp = readw(host->ioaddr + SD_CE_ATA_2);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d146bff..d31c31d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -13,6 +13,8 @@
* - JMicron (hardware and technical support)
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/io.h>
@@ -32,8 +34,8 @@
#define DRIVER_NAME "sdhci"
-#define DBG(f, x...) \
- pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
+#define DBG(fmt, ...) \
+ pr_debug("[%s()]: " fmt, __func__, ##__VA_ARGS__)
#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
defined(CONFIG_MMC_SDHCI_MODULE))
@@ -68,51 +70,51 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
static void sdhci_dumpregs(struct sdhci_host *host)
{
- pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
- mmc_hostname(host->mmc));
-
- pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
- sdhci_readl(host, SDHCI_DMA_ADDRESS),
- sdhci_readw(host, SDHCI_HOST_VERSION));
- pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
- sdhci_readw(host, SDHCI_BLOCK_SIZE),
- sdhci_readw(host, SDHCI_BLOCK_COUNT));
- pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
- sdhci_readl(host, SDHCI_ARGUMENT),
- sdhci_readw(host, SDHCI_TRANSFER_MODE));
- pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
- sdhci_readl(host, SDHCI_PRESENT_STATE),
- sdhci_readb(host, SDHCI_HOST_CONTROL));
- pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
- sdhci_readb(host, SDHCI_POWER_CONTROL),
- sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
- pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
- sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
- sdhci_readw(host, SDHCI_CLOCK_CONTROL));
- pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
- sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
- sdhci_readl(host, SDHCI_INT_STATUS));
- pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
- sdhci_readl(host, SDHCI_INT_ENABLE),
- sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
- pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
- sdhci_readw(host, SDHCI_ACMD12_ERR),
- sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
- pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
- sdhci_readl(host, SDHCI_CAPABILITIES),
- sdhci_readl(host, SDHCI_CAPABILITIES_1));
- pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
- sdhci_readw(host, SDHCI_COMMAND),
- sdhci_readl(host, SDHCI_MAX_CURRENT));
- pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
- sdhci_readw(host, SDHCI_HOST_CONTROL2));
+ pr_debug("=========== REGISTER DUMP (%s)===========\n",
+ mmc_hostname(host->mmc));
+
+ pr_debug("Sys addr: 0x%08x | Version: 0x%08x\n",
+ sdhci_readl(host, SDHCI_DMA_ADDRESS),
+ sdhci_readw(host, SDHCI_HOST_VERSION));
+ pr_debug("Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ sdhci_readw(host, SDHCI_BLOCK_SIZE),
+ sdhci_readw(host, SDHCI_BLOCK_COUNT));
+ pr_debug("Argument: 0x%08x | Trn mode: 0x%08x\n",
+ sdhci_readl(host, SDHCI_ARGUMENT),
+ sdhci_readw(host, SDHCI_TRANSFER_MODE));
+ pr_debug("Present: 0x%08x | Host ctl: 0x%08x\n",
+ sdhci_readl(host, SDHCI_PRESENT_STATE),
+ sdhci_readb(host, SDHCI_HOST_CONTROL));
+ pr_debug("Power: 0x%08x | Blk gap: 0x%08x\n",
+ sdhci_readb(host, SDHCI_POWER_CONTROL),
+ sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
+ pr_debug("Wake-up: 0x%08x | Clock: 0x%08x\n",
+ sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
+ sdhci_readw(host, SDHCI_CLOCK_CONTROL));
+ pr_debug("Timeout: 0x%08x | Int stat: 0x%08x\n",
+ sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
+ sdhci_readl(host, SDHCI_INT_STATUS));
+ pr_debug("Int enab: 0x%08x | Sig enab: 0x%08x\n",
+ sdhci_readl(host, SDHCI_INT_ENABLE),
+ sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
+ pr_debug("AC12 err: 0x%08x | Slot int: 0x%08x\n",
+ sdhci_readw(host, SDHCI_ACMD12_ERR),
+ sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
+ pr_debug("Caps: 0x%08x | Caps_1: 0x%08x\n",
+ sdhci_readl(host, SDHCI_CAPABILITIES),
+ sdhci_readl(host, SDHCI_CAPABILITIES_1));
+ pr_debug("Cmd: 0x%08x | Max curr: 0x%08x\n",
+ sdhci_readw(host, SDHCI_COMMAND),
+ sdhci_readl(host, SDHCI_MAX_CURRENT));
+ pr_debug("Host ctl2: 0x%08x\n",
+ sdhci_readw(host, SDHCI_HOST_CONTROL2));
if (host->flags & SDHCI_USE_ADMA)
- pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
- readl(host->ioaddr + SDHCI_ADMA_ERROR),
- readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ pr_debug("ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
- pr_debug(DRIVER_NAME ": ===========================================\n");
+ pr_debug("===========================================\n");
}
/*****************************************************************************\
@@ -417,7 +419,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
break;
}
- DBG("PIO transfer complete.\n");
+ DBG("PIO transfer complete\n");
}
static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
@@ -745,9 +747,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
if (unlikely(broken)) {
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->length & 0x3) {
- DBG("Reverting to PIO because of "
- "transfer size (%d)\n",
- sg->length);
+ DBG("Reverting to PIO because of transfer size (%d)\n",
+ sg->length);
host->flags &= ~SDHCI_REQ_USE_DMA;
break;
}
@@ -780,8 +781,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
if (unlikely(broken)) {
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->offset & 0x3) {
- DBG("Reverting to PIO because of "
- "bad alignment\n");
+ DBG("Reverting to PIO because of bad alignment\n");
host->flags &= ~SDHCI_REQ_USE_DMA;
break;
}
@@ -972,8 +972,8 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
- pr_err("%s: Controller never released "
- "inhibit bit(s).\n", mmc_hostname(host->mmc));
+ pr_err("%s: Controller never released inhibit bit(s)\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = -EIO;
tasklet_schedule(&host->finish_tasklet);
@@ -1154,8 +1154,8 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- pr_err("%s: Internal clock never "
- "stabilised.\n", mmc_hostname(host->mmc));
+ pr_err("%s: Internal clock never stabilised\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
}
@@ -1592,8 +1592,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
if (!(ctrl & SDHCI_CTRL_VDD_180))
return 0;
else {
- pr_info(DRIVER_NAME ": Switching to 3.3V "
- "signalling voltage failed\n");
+ pr_info("Switching to 3.3V signalling voltage failed\n");
return -EIO;
}
} else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
@@ -1651,8 +1650,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
pwr |= SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
- pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
- "voltage failed, retrying with S18R set to 0\n");
+ pr_info("Switching to 1.8V signalling voltage failed, retrying with S18R set to 0\n");
return -EAGAIN;
} else
/* No signal voltage switch required */
@@ -1774,10 +1772,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
spin_lock(&host->lock);
if (!host->tuning_done) {
- pr_info(DRIVER_NAME ": Timeout waiting for "
- "Buffer Read Ready interrupt during tuning "
- "procedure, falling back to fixed sampling "
- "clock\n");
+ pr_info("Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n");
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
@@ -1804,9 +1799,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
} else {
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
- pr_info(DRIVER_NAME ": Tuning procedure"
- " failed, falling back to fixed sampling"
- " clock\n");
+ pr_info("Tuning procedure failed, falling back to fixed sampling clock\n");
err = -EIO;
}
}
@@ -2010,8 +2003,8 @@ static void sdhci_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
if (host->mrq) {
- pr_err("%s: Timeout waiting for hardware "
- "interrupt.\n", mmc_hostname(host->mmc));
+ pr_err("%s: Timeout waiting for hardware interrupt\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
if (host->data) {
@@ -2056,9 +2049,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
BUG_ON(intmask == 0);
if (!host->cmd) {
- pr_err("%s: Got command interrupt 0x%08x even "
- "though no command operation was in progress.\n",
- mmc_hostname(host->mmc), (unsigned)intmask);
+ pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
return;
}
@@ -2087,8 +2079,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
*/
if (host->cmd->flags & MMC_RSP_BUSY) {
if (host->cmd->data)
- DBG("Cannot wait for busy signal when also "
- "doing a data transfer");
+ DBG("Cannot wait for busy signal when also doing a data transfer\n");
else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
return;
@@ -2156,9 +2147,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
}
}
- pr_err("%s: Got data interrupt 0x%08x even "
- "though no data operation was in progress.\n",
- mmc_hostname(host->mmc), (unsigned)intmask);
+ pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
return;
@@ -2204,10 +2194,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
SDHCI_DEFAULT_BOUNDARY_SIZE;
host->data->bytes_xfered = dmanow - dmastart;
- DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
- " next 0x%08x\n",
- mmc_hostname(host->mmc), dmastart,
- host->data->bytes_xfered, dmanow);
+ DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
+ mmc_hostname(host->mmc), dmastart,
+ host->data->bytes_xfered, dmanow);
sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
}
@@ -2250,7 +2239,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
}
DBG("*** %s got interrupt: 0x%08x\n",
- mmc_hostname(host->mmc), intmask);
+ mmc_hostname(host->mmc), intmask);
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
@@ -2548,9 +2537,8 @@ int sdhci_add_host(struct sdhci_host *host)
host->version = (host->version & SDHCI_SPEC_VER_MASK)
>> SDHCI_SPEC_VER_SHIFT;
if (host->version > SDHCI_SPEC_300) {
- pr_err("%s: Unknown controller version (%d). "
- "You may experience problems.\n", mmc_hostname(mmc),
- host->version);
+ pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
+ mmc_hostname(mmc), host->version);
}
caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
@@ -2631,8 +2619,8 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->max_clk == 0 || host->quirks &
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
if (!host->ops->get_max_clock) {
- pr_err("%s: Hardware doesn't specify base clock "
- "frequency.\n", mmc_hostname(mmc));
+ pr_err("%s: Hardware doesn't specify base clock frequency\n",
+ mmc_hostname(mmc));
return -ENODEV;
}
host->max_clk = host->ops->get_max_clock(host);
@@ -2677,8 +2665,8 @@ int sdhci_add_host(struct sdhci_host *host)
host->timeout_clk = host->ops->get_timeout_clock(host);
} else if (!(host->quirks &
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
- pr_err("%s: Hardware doesn't specify timeout clock "
- "frequency.\n", mmc_hostname(mmc));
+ pr_err("%s: Hardware doesn't specify timeout clock frequency\n",
+ mmc_hostname(mmc));
return -ENODEV;
}
}
@@ -2845,8 +2833,8 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
if (mmc->ocr_avail == 0) {
- pr_err("%s: Hardware doesn't report any "
- "support voltages.\n", mmc_hostname(mmc));
+ pr_err("%s: Hardware doesn't report any support voltages\n",
+ mmc_hostname(mmc));
return -ENODEV;
}
@@ -2994,8 +2982,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
host->flags |= SDHCI_DEVICE_DEAD;
if (host->mrq) {
- pr_err("%s: Controller removed during "
- " transfer!\n", mmc_hostname(host->mmc));
+ pr_err("%s: Controller removed during transfer!\n",
+ mmc_hostname(host->mmc));
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
@@ -3053,9 +3041,8 @@ EXPORT_SYMBOL_GPL(sdhci_free_host);
static int __init sdhci_drv_init(void)
{
- pr_info(DRIVER_NAME
- ": Secure Digital Host Controller Interface driver\n");
- pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
+ pr_info("Secure Digital Host Controller Interface driver\n");
+ pr_info("Copyright(c) Pierre Ossman\n");
return 0;
}
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index 7009f17..1e30245 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -310,8 +310,8 @@ static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
/* transfer data */
if (data && cmd->error == 0) {
- dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i "
- "sg length %i\n", data->blksz, data->blocks,
+ dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i sg length %i\n",
+ data->blksz, data->blocks,
data->sg_len, data->sg->length);
/* enter data reading mode */
@@ -330,8 +330,8 @@ static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
kunmap(page);
flush_dcache_page(page);
if (result) {
- dev_err(dev, "sdricoh_request: cmd %i "
- "block transfer failed\n", cmd->opcode);
+ dev_err(dev, "sdricoh_request: cmd %i block transfer failed\n",
+ cmd->opcode);
cmd->error = result;
break;
} else
@@ -476,8 +476,8 @@ static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev)
{
struct pci_dev *pci_dev = NULL;
- dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
- " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
+ dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device %s %s ...\n",
+ pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
/* search pci cardbus bridge that contains the mmc controller */
/* the io region is already claimed by yenta_socket... */
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 55d6c60..d432597 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -787,9 +787,9 @@ static void tifm_sd_abort(unsigned long data)
{
struct tifm_sd *host = (struct tifm_sd*)data;
- pr_err("%s : card failed to respond for a long period of time "
- "(%x, %x)\n",
- dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags);
+ pr_err("%s : card failed to respond for a long period of time (%x, %x)\n",
+ dev_name(&host->dev->dev),
+ host->req->cmd->opcode, host->cmd_flags);
tifm_eject(host->dev);
}
@@ -803,8 +803,7 @@ static void tifm_sd_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_lock_irqsave(&sock->lock, flags);
- dev_dbg(&sock->dev, "ios: clock = %u, vdd = %x, bus_mode = %x, "
- "chip_select = %x, power_mode = %x, bus_width = %x\n",
+ dev_dbg(&sock->dev, "ios: clock = %u, vdd = %x, bus_mode = %x, chip_select = %x, power_mode = %x, bus_width = %x\n",
ios->clock, ios->vdd, ios->bus_mode, ios->chip_select,
ios->power_mode, ios->bus_width);
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 4b83c43..dc479b0 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -8,6 +8,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
@@ -838,8 +840,7 @@ static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
BUG_ON(intmask == 0);
if (!host->cmd) {
- pr_err("%s: Got command interrupt 0x%x even "
- "though no command operation was in progress.\n",
+ pr_err("%s: Got command interrupt 0x%x even though no command operation was in progress\n",
mmc_hostname(host->mmc), intmask);
return;
}
@@ -941,8 +942,8 @@ static void via_sdc_timeout(unsigned long ulongdata)
spin_lock_irqsave(&sdhost->lock, flags);
if (sdhost->mrq) {
- pr_err("%s: Timeout waiting for hardware interrupt."
- "cmd:0x%x\n", mmc_hostname(sdhost->mmc),
+ pr_err("%s: Timeout waiting for hardware interrupt.cmd:0x%x\n",
+ mmc_hostname(sdhost->mmc),
sdhost->mrq->cmd->opcode);
if (sdhost->data) {
@@ -1091,8 +1092,7 @@ static int __devinit via_sd_probe(struct pci_dev *pcidev,
u8 gatt;
int ret;
- pr_info(DRV_NAME
- ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
+ pr_info("VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
(int)pcidev->revision);
@@ -1192,8 +1192,8 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
mmiowb();
if (sdhost->mrq) {
- pr_err("%s: Controller removed during "
- "transfer\n", mmc_hostname(sdhost->mmc));
+ pr_err("%s: Controller removed during transfer\n",
+ mmc_hostname(sdhost->mmc));
/* make sure all DMA is stopped */
writel(VIA_CRDR_DMACTRL_SFTRST,
@@ -1225,8 +1225,7 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
pci_release_regions(pcidev);
pci_disable_device(pcidev);
- pr_info(DRV_NAME
- ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
+ pr_info("VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
}
@@ -1339,8 +1338,7 @@ static struct pci_driver via_sd_driver = {
static int __init via_sd_drv_init(void)
{
- pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver "
- "(C) 2008 VIA Technologies, Inc.\n");
+ pr_info("VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.\n");
return pci_register_driver(&via_sd_driver);
}
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index e8f6e65..1908a25 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -35,6 +35,9 @@
* bits and driver data fields reflect that limit by using
* u8, u16, u32
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
@@ -1257,9 +1260,8 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
}
} else {
dev_err(&vub300->udev->dev,
- "not enough memory for xfer buffer to send"
- " INTERRUPT_PSEUDOCODE for %s %s\n", fw->data,
- vub300->vub_name);
+ "not enough memory for xfer buffer to send INTERRUPT_PSEUDOCODE for %s %s\n",
+ fw->data, vub300->vub_name);
strncpy(vub300->vub_name,
"SDIO interrupt pseudocode download failed",
sizeof(vub300->vub_name));
@@ -1304,9 +1306,8 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
}
} else {
dev_err(&vub300->udev->dev,
- "not enough memory for xfer buffer to send"
- " TRANSFER_PSEUDOCODE for %s %s\n", fw->data,
- vub300->vub_name);
+ "not enough memory for xfer buffer to send TRANSFER_PSEUDOCODE for %s %s\n",
+ fw->data, vub300->vub_name);
strncpy(vub300->vub_name,
"SDIO transfer pseudocode download failed",
sizeof(vub300->vub_name));
@@ -2002,11 +2003,11 @@ static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x00, 0x00, buf, buf_array_size, HZ);
if (retval != 8) {
- dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
- " %dkHz failed with retval=%d\n", kHzClock, retval);
+ dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED %dkHz failed with retval=%d\n",
+ kHzClock, retval);
} else {
- dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED"
- " %dkHz\n", kHzClock);
+ dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED %dkHz\n",
+ kHzClock);
}
}
@@ -2251,8 +2252,7 @@ static int vub300_probe(struct usb_interface *interface,
endpoint->bEndpointAddress;
} else {
dev_warn(&vub300->udev->dev,
- "ignoring"
- " unexpected bulk_in endpoint");
+ "ignoring unexpected bulk_in endpoint\n");
}
} else if (usb_endpoint_is_bulk_out(endpoint)) {
if (!vub300->cmnd_out_ep) {
@@ -2263,20 +2263,18 @@ static int vub300_probe(struct usb_interface *interface,
endpoint->bEndpointAddress;
} else {
dev_warn(&vub300->udev->dev,
- "ignoring"
- " unexpected bulk_out endpoint");
+ "ignoring unexpected bulk_out endpoint\n");
}
} else {
dev_warn(&vub300->udev->dev,
- "vub300 ignoring EndPoint(%d) %02X", i,
- endpoint->bEndpointAddress);
+ "vub300 ignoring EndPoint(%d) %02X\n",
+ i, endpoint->bEndpointAddress);
}
}
if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
vub300->data_inp_ep && vub300->data_out_ep) {
dev_info(&vub300->udev->dev,
- "vub300 %s packets"
- " using EndPoints %02X %02X %02X %02X\n",
+ "vub300 %s packets using EndPoints %02X %02X %02X %02X\n",
vub300->large_usb_packets ? "LARGE" : "SMALL",
vub300->cmnd_out_ep, vub300->cmnd_res_ep,
vub300->data_out_ep, vub300->data_inp_ep);
@@ -2341,13 +2339,11 @@ static int vub300_probe(struct usb_interface *interface,
add_timer(&vub300->inactivity_timer);
if (vub300->card_present)
dev_info(&vub300->udev->dev,
- "USB vub300 remote SDIO host controller[%d]"
- "connected with SD/SDIO card inserted\n",
+ "USB vub300 remote SDIO host controller[%d]connected with SD/SDIO card inserted\n",
interface_to_InterfaceNumber(interface));
else
dev_info(&vub300->udev->dev,
- "USB vub300 remote SDIO host controller[%d]"
- "connected with no SD/SDIO card inserted\n",
+ "USB vub300 remote SDIO host controller[%d]connected with no SD/SDIO card inserted\n",
interface_to_InterfaceNumber(interface));
mmc_add_host(mmc);
return 0;
@@ -2381,8 +2377,8 @@ static void vub300_disconnect(struct usb_interface *interface)
vub300->interface = NULL;
kref_put(&vub300->kref, vub300_delete);
mmc_remove_host(mmc);
- pr_info("USB vub300 remote SDIO host controller[%d]"
- " now disconnected", ifnum);
+ pr_info("USB remote SDIO host controller[%d] now disconnected\n",
+ ifnum);
return;
}
}
@@ -2448,29 +2444,29 @@ static int __init vub300_init(void)
{ /* NOT irq */
int result;
- pr_info("VUB300 Driver rom wait states = %02X irqpoll timeout = %04X",
+ pr_info("Driver rom wait states = %02X irqpoll timeout = %04X\n",
firmware_rom_wait_states, 0x0FFFF & firmware_irqpoll_timeout);
cmndworkqueue = create_singlethread_workqueue("kvub300c");
if (!cmndworkqueue) {
- pr_err("not enough memory for the REQUEST workqueue");
+ pr_err("not enough memory for the REQUEST workqueue\n");
result = -ENOMEM;
goto out1;
}
pollworkqueue = create_singlethread_workqueue("kvub300p");
if (!pollworkqueue) {
- pr_err("not enough memory for the IRQPOLL workqueue");
+ pr_err("not enough memory for the IRQPOLL workqueue\n");
result = -ENOMEM;
goto out2;
}
deadworkqueue = create_singlethread_workqueue("kvub300d");
if (!deadworkqueue) {
- pr_err("not enough memory for the EXPIRED workqueue");
+ pr_err("not enough memory for the EXPIRED workqueue\n");
result = -ENOMEM;
goto out3;
}
result = usb_register(&vub300_driver);
if (result) {
- pr_err("usb_register failed. Error number %d", result);
+ pr_err("usb_register failed. Error number %d\n", result);
goto out4;
}
return 0;
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index deaed8c..7536b50 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -721,9 +721,8 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
* Any leftover data?
*/
if (count) {
- pr_err("%s: Incomplete DMA transfer. "
- "%d bytes left.\n",
- mmc_hostname(host->mmc), count);
+ pr_err("%s: Incomplete DMA transfer. %d bytes left.\n",
+ mmc_hostname(host->mmc), count);
if (!data->error)
data->error = -EIO;
--
1.7.6.405.gc1be0
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 3/4] mmc: Logging neatening
2011-11-15 23:32 ` [PATCH 3/4] mmc: Logging neatening Joe Perches
@ 2011-11-16 1:48 ` NamJae Jeon
2011-11-16 1:50 ` Joe Perches
2011-11-16 18:38 ` Mike Frysinger
0 siblings, 2 replies; 19+ messages in thread
From: NamJae Jeon @ 2011-11-16 1:48 UTC (permalink / raw)
To: Joe Perches
Cc: Nicolas Ferre, Manuel Lauss, Cliff Cai, Nicolas Pitre,
Chris Ball, Sascha Sommer, Alex Dubov, Bruce Chang, Harald Welte,
Tony Olech, Pierre Ossman, linux-mmc, linux-kernel,
linux-arm-kernel, uclinux-dist-devel, linux-omap, linux-usb
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 91418 bytes --]
2011/11/16 Joe Perches <joe@perches.com>:
> Coalesce formats.
> Align arguments.
> Add pr_fmt, remove prefixes from format strings.
> Neaten DBG uses, rearrange argument order.
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>  drivers/mmc/card/mmc_test.c   |  49 +++++-------
>  drivers/mmc/core/core.c     |  52 ++++++------
>  drivers/mmc/core/host.c     |   3 +-
>  drivers/mmc/core/mmc.c     |  22 ++---
>  drivers/mmc/core/mmc_ops.c   |   5 +-
>  drivers/mmc/core/sd.c      |  25 +++---
>  drivers/mmc/core/sdio_bus.c   |   2 +
>  drivers/mmc/core/sdio_io.c   |  14 ++--
>  drivers/mmc/core/sdio_irq.c   |  10 ++-
>  drivers/mmc/host/at91_mci.c   |   3 +-
>  drivers/mmc/host/au1xmmc.c   |  35 ++++----
>  drivers/mmc/host/bfin_sdh.c   |   3 +-
>  drivers/mmc/host/dw_mmc.c    |  16 ++--
>  drivers/mmc/host/mmc_spi.c   |   9 +-
>  drivers/mmc/host/mmci.c     |   3 +-
>  drivers/mmc/host/mvsdio.c    |  33 ++++----
>  drivers/mmc/host/omap_hsmmc.c  |  11 +--
>  drivers/mmc/host/sdhci-pci.c  |  17 ++---
> Â drivers/mmc/host/sdhci-pxav3.c | Â Â 7 +-
>  drivers/mmc/host/sdhci.c    |  175 ++++++++++++++++++---------------------
>  drivers/mmc/host/sdricoh_cs.c  |  12 ++--
>  drivers/mmc/host/tifm_sd.c   |   9 +-
>  drivers/mmc/host/via-sdmmc.c  |  22 +++---
>  drivers/mmc/host/vub300.c    |  54 ++++++-------
>  drivers/mmc/host/wbsd.c     |   5 +-
> Â 25 files changed, 277 insertions(+), 319 deletions(-)
>
> diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
> index b038c4a..f079555 100644
> --- a/drivers/mmc/card/mmc_test.c
> +++ b/drivers/mmc/card/mmc_test.c
> @@ -9,6 +9,8 @@
> Â * your option) any later version.
> Â */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/mmc/core.h>
> Â #include <linux/mmc/card.h>
> Â #include <linux/mmc/host.h>
> @@ -251,8 +253,7 @@ static int mmc_test_wait_busy(struct mmc_test_card *test)
> Â Â Â Â Â Â Â Â if (!busy && mmc_test_busy(&cmd)) {
> Â Â Â Â Â Â Â Â Â Â Â Â busy = 1;
> Â Â Â Â Â Â Â Â Â Â Â Â if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Warning: Host did not "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "wait for busy state to end.\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Warning: Host did not wait for busy state to end\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } while (mmc_test_busy(&cmd));
> @@ -553,12 +554,11 @@ static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes,
> Â Â Â Â rate = mmc_test_rate(bytes, &ts);
> Â Â Â Â iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
>
> - Â Â Â pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
> - Â Â Â Â Â Â Â Â Â Â Â Â "seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host), sectors, sectors >> 1,
> - Â Â Â Â Â Â Â Â Â Â Â Â (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
> - Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
> - Â Â Â Â Â Â Â Â Â Â Â Â iops / 100, iops % 100);
> + Â Â Â pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
> + Â Â Â Â Â Â Â mmc_hostname(test->card->host), sectors, sectors >> 1,
> + Â Â Â Â Â Â Â (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
> + Â Â Â Â Â Â Â (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
> + Â Â Â Â Â Â Â iops / 100, iops % 100);
>
> Â Â Â Â mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops);
> Â }
> @@ -579,14 +579,12 @@ static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes,
> Â Â Â Â rate = mmc_test_rate(tot, &ts);
> Â Â Â Â iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
>
> - Â Â Â pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
> - Â Â Â Â Â Â Â Â Â Â Â Â "%lu.%09lu seconds (%u kB/s, %u KiB/s, "
> - Â Â Â Â Â Â Â Â Â Â Â Â "%u.%02u IOPS, sg_len %d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host), count, sectors, count,
> - Â Â Â Â Â Â Â Â Â Â Â Â sectors >> 1, (sectors & 1 ? ".5" : ""),
> - Â Â Â Â Â Â Â Â Â Â Â Â (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
> - Â Â Â Â Â Â Â Â Â Â Â Â rate / 1000, rate / 1024, iops / 100, iops % 100,
> - Â Â Â Â Â Â Â Â Â Â Â Â test->area.sg_len);
> + Â Â Â pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS, sg_len %d)\n",
> + Â Â Â Â Â Â Â mmc_hostname(test->card->host), count, sectors, count,
> + Â Â Â Â Â Â Â sectors >> 1, (sectors & 1 ? ".5" : ""),
> + Â Â Â Â Â Â Â (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
> + Â Â Â Â Â Â Â rate / 1000, rate / 1024, iops / 100, iops % 100,
> + Â Â Â Â Â Â Â test->area.sg_len);
>
> Â Â Â Â mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops);
> Â }
> @@ -1410,7 +1408,7 @@ static int mmc_test_multi_read_high(struct mmc_test_card *test)
> Â static int mmc_test_no_highmem(struct mmc_test_card *test)
> Â {
> Â Â Â Â pr_info("%s: Highmem not configured - test skipped\n",
> - Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> Â Â Â Â return 0;
> Â }
>
> @@ -1437,7 +1435,7 @@ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz,
> Â Â Â Â }
> Â Â Â Â if (err)
> Â Â Â Â Â Â Â Â pr_info("%s: Failed to map sg list\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> Â Â Â Â return err;
> Â }
>
> @@ -2709,8 +2707,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
> Â Â Â Â Â Â Â Â if (mmc_test_cases[i].prepare) {
> Â Â Â Â Â Â Â Â Â Â Â Â ret = mmc_test_cases[i].prepare(test);
> Â Â Â Â Â Â Â Â Â Â Â Â if (ret) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: Prepare "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "stage failed! (%d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: Prepare stage failed! (%d)\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host),
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret);
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â continue;
> @@ -2747,13 +2744,11 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â case RESULT_UNSUP_HOST:
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: UNSUPPORTED "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "(by host)\n",
> + Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: UNSUPPORTED (by host)\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â case RESULT_UNSUP_CARD:
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: UNSUPPORTED "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "(by card)\n",
> + Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: UNSUPPORTED (by card)\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â default:
> @@ -2768,8 +2763,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
> Â Â Â Â Â Â Â Â if (mmc_test_cases[i].cleanup) {
> Â Â Â Â Â Â Â Â Â Â Â Â ret = mmc_test_cases[i].cleanup(test);
> Â Â Â Â Â Â Â Â Â Â Â Â if (ret) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Warning: Cleanup "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "stage failed! (%d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Warning: Cleanup stage failed! (%d)\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host),
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret);
> Â Â Â Â Â Â Â Â Â Â Â Â }
> @@ -2778,8 +2772,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
>
> Â Â Â Â mmc_release_host(test->card->host);
>
> - Â Â Â pr_info("%s: Tests completed.\n",
> - Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â pr_info("%s: Tests completed\n", mmc_hostname(test->card->host));
> Â }
>
> Â static void mmc_test_free_result(struct mmc_card *card)
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 54d6a13..39e1311 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -10,6 +10,9 @@
> Â * it under the terms of the GNU General Public License version 2 as
> Â * published by the Free Software Foundation.
> Â */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/module.h>
> Â #include <linux/init.h>
> Â #include <linux/interrupt.h>
> @@ -153,22 +156,22 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
> Â Â Â Â Â Â Â Â led_trigger_event(host->led, LED_OFF);
>
> Â Â Â Â Â Â Â Â pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), cmd->opcode, err,
> - Â Â Â Â Â Â Â Â Â Â Â cmd->resp[0], cmd->resp[1],
> - Â Â Â Â Â Â Â Â Â Â Â cmd->resp[2], cmd->resp[3]);
> + Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), cmd->opcode, err,
> + Â Â Â Â Â Â Â Â Â Â Â Â cmd->resp[0], cmd->resp[1],
> + Â Â Â Â Â Â Â Â Â Â Â Â cmd->resp[2], cmd->resp[3]);
>
> Â Â Â Â Â Â Â Â if (mrq->data) {
> Â Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: Â Â %d bytes transferred: %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->bytes_xfered, mrq->data->error);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host),
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->bytes_xfered, mrq->data->error);
> Â Â Â Â Â Â Â Â }
>
> Â Â Â Â Â Â Â Â if (mrq->stop) {
> Â Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: Â Â (CMD%u): %d: %08x %08x %08x %08x\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), mrq->stop->opcode,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->error,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->resp[0], mrq->stop->resp[1],
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->resp[2], mrq->stop->resp[3]);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), mrq->stop->opcode,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->error,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->resp[0], mrq->stop->resp[1],
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->resp[2], mrq->stop->resp[3]);
> Â Â Â Â Â Â Â Â }
>
> Â Â Â Â Â Â Â Â if (mrq->done)
> @@ -193,12 +196,11 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> Â Â Â Â Â Â Â Â mrq->cmd->arg, mrq->cmd->flags);
>
> Â Â Â Â if (mrq->data) {
> - Â Â Â Â Â Â Â pr_debug("%s: Â Â blksz %d blocks %d flags %08x "
> - Â Â Â Â Â Â Â Â Â Â Â "tsac %d ms nsac %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), mrq->data->blksz,
> - Â Â Â Â Â Â Â Â Â Â Â mrq->data->blocks, mrq->data->flags,
> - Â Â Â Â Â Â Â Â Â Â Â mrq->data->timeout_ns / 1000000,
> - Â Â Â Â Â Â Â Â Â Â Â mrq->data->timeout_clks);
> + Â Â Â Â Â Â Â pr_debug("%s: Â Â blksz %d blocks %d flags %08x tsac %d ms nsac %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), mrq->data->blksz,
> + Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->blocks, mrq->data->flags,
> + Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->timeout_ns / 1000000,
> + Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->timeout_clks);
> Â Â Â Â }
>
> Â Â Â Â if (mrq->stop) {
> @@ -842,8 +844,7 @@ static inline void mmc_set_ios(struct mmc_host *host)
> Â {
> Â Â Â Â struct mmc_ios *ios = &host->ios;
>
> - Â Â Â pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
> - Â Â Â Â Â Â Â "width %u timing %u\n",
> + Â Â Â pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
> Â Â Â Â Â Â Â Â mmc_hostname(host), ios->clock, ios->bus_mode,
> Â Â Â Â Â Â Â Â ios->power_mode, ios->chip_select, ios->vdd,
> Â Â Â Â Â Â Â Â ios->bus_width, ios->timing);
> @@ -1310,8 +1311,7 @@ void mmc_power_off(struct mmc_host *host)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â notify_type, timeout);
>
> Â Â Â Â Â Â Â Â if (err && err != -EBADMSG)
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("Device failed to respond within %d poweroff "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "time. Forcefully powering down the device\n",
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("Device failed to respond within %d poweroff time. Forcefully powering down the device.\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â timeout);
>
> Â Â Â Â Â Â Â Â /* Set the card state to no notification after the poweroff */
> @@ -1642,8 +1642,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
> Â Â Â Â cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
> Â Â Â Â err = mmc_wait_for_cmd(card->host, &cmd, 0);
> Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â pr_err("mmc_erase: group start error %d, "
> - Â Â Â Â Â Â Â Â Â Â Â "status %#x\n", err, cmd.resp[0]);
> + Â Â Â Â Â Â Â pr_err("mmc_erase: group start error %d, status %#x\n",
> + Â Â Â Â Â Â Â Â Â Â Â err, cmd.resp[0]);
> Â Â Â Â Â Â Â Â err = -EIO;
> Â Â Â Â Â Â Â Â goto out;
> Â Â Â Â }
> @@ -1688,7 +1688,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
> Â Â Â Â Â Â Â Â err = mmc_wait_for_cmd(card->host, &cmd, 0);
> Â Â Â Â Â Â Â Â if (err || (cmd.resp[0] & 0xFDF92000)) {
> Â Â Â Â Â Â Â Â Â Â Â Â pr_err("error %d requesting status %#x\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err, cmd.resp[0]);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err, cmd.resp[0]);
> Â Â Â Â Â Â Â Â Â Â Â Â err = -EIO;
> Â Â Â Â Â Â Â Â Â Â Â Â goto out;
> Â Â Â Â Â Â Â Â }
> @@ -2245,7 +2245,7 @@ int mmc_flush_cache(struct mmc_card *card)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â EXT_CSD_FLUSH_CACHE, 1, 0);
> Â Â Â Â Â Â Â Â if (err)
> Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: cache flush error %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), err);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), err);
> Â Â Â Â }
>
> Â Â Â Â return err;
> @@ -2275,9 +2275,9 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â EXT_CSD_CACHE_CTRL, enable, 0);
> Â Â Â Â Â Â Â Â if (err)
> Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: cache %s error %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â enable ? "on" : "off",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â enable ? "on" : "off",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err);
> Â Â Â Â Â Â Â Â else
> Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.cache_ctrl = enable;
> Â Â Â Â }
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 835e86a..7f963c0 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -94,8 +94,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
> Â Â Â Â unsigned long flags;
>
> Â Â Â Â if (!freq) {
> - Â Â Â Â Â Â Â pr_debug("%s: frequency set to 0 in disable function, "
> - Â Â Â Â Â Â Â Â Â Â Â Â "this means the clock is already disabled.\n",
> + Â Â Â Â Â Â Â pr_debug("%s: frequency set to 0 in disable function, this means the clock is already disabled\n",
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> Â Â Â Â Â Â Â Â return;
> Â Â Â Â }
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index bbd7adb..f6db788 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -196,8 +196,8 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
> Â Â Â Â */
> Â Â Â Â ext_csd = kmalloc(512, GFP_KERNEL);
> Â Â Â Â if (!ext_csd) {
> - Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer to "
> - Â Â Â Â Â Â Â Â Â Â Â "receive the ext_csd.\n", mmc_hostname(card->host));
> + Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer to receive the ext_csd\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â Â Â Â Â return -ENOMEM;
> Â Â Â Â }
>
> @@ -218,10 +218,8 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
> Â Â Â Â Â Â Â Â * stored in their CSD.
> Â Â Â Â Â Â Â Â */
> Â Â Â Â Â Â Â Â if (card->csd.capacity == (4096 * 512)) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: unable to read EXT_CSD "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "on a possible high capacity card. "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "Card will be ignored.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â Â Â Â Â } else {
> Â Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> @@ -251,9 +249,9 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
> Â Â Â Â card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
> Â Â Â Â if (card->csd.structure == 3) {
> Â Â Â Â Â Â Â Â if (card->ext_csd.raw_ext_csd_structure > 2) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: unrecognised EXT_CSD structure "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "version %d\n", mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.raw_ext_csd_structure);
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: unrecognised EXT_CSD structure version %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.raw_ext_csd_structure);
> Â Â Â Â Â Â Â Â Â Â Â Â err = -EINVAL;
> Â Â Â Â Â Â Â Â Â Â Â Â goto out;
> Â Â Â Â Â Â Â Â }
> @@ -984,8 +982,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ext_csd);
> Â Â Â Â Â Â Â Â Â Â Â Â if (err)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: power class selection to "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "bus width %d failed\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: power class selection to bus width %d failed\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 << bus_width);
>
> @@ -1015,8 +1012,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ext_csd);
> Â Â Â Â Â Â Â Â Â Â Â Â if (err)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: power class selection to "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "bus width %d ddr %d failed\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: power class selection to bus width %d ddr %d failed\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 << bus_width, ddr);
>
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index 32deb3e..7c7388c 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -569,9 +569,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
>
> Â Â Â Â err = mmc_wait_for_cmd(card->host, &cmd, 0);
> Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â pr_warn("%s: error %d interrupting operation. "
> - Â Â Â Â Â Â Â Â Â Â Â "HPI command response %#x\n", mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â err, cmd.resp[0]);
> + Â Â Â Â Â Â Â pr_warn("%s: error %d interrupting operation. HPI command response %#x\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), err, cmd.resp[0]);
> Â Â Â Â Â Â Â Â return err;
> Â Â Â Â }
> Â Â Â Â if (status)
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 52a1563..1492b7b 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -10,6 +10,8 @@
> Â * published by the Free Software Foundation.
> Â */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/err.h>
> Â #include <linux/slab.h>
> Â #include <linux/stat.h>
> @@ -283,9 +285,8 @@ static int mmc_read_switch(struct mmc_card *card)
>
> Â Â Â Â status = kmalloc(64, GFP_KERNEL);
> Â Â Â Â if (!status) {
> - Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for "
> - Â Â Â Â Â Â Â Â Â Â Â "switch capabilities.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for switch capabilities\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â Â Â Â Â return -ENOMEM;
> Â Â Â Â }
>
> @@ -299,7 +300,7 @@ static int mmc_read_switch(struct mmc_card *card)
> Â Â Â Â Â Â Â Â if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
> Â Â Â Â Â Â Â Â Â Â Â Â goto out;
>
> - Â Â Â Â Â Â Â pr_warn("%s: problem reading Bus Speed modes.\n",
> + Â Â Â Â Â Â Â pr_warn("%s: problem reading Bus Speed modes\n",
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â Â Â Â Â err = 0;
>
> @@ -381,8 +382,8 @@ int mmc_sd_switch_hs(struct mmc_card *card)
>
> Â Â Â Â status = kmalloc(64, GFP_KERNEL);
> Â Â Â Â if (!status) {
> - Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for "
> - Â Â Â Â Â Â Â Â Â Â Â "switch capabilities.\n", mmc_hostname(card->host));
> + Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for switch capabilities\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â Â Â Â Â return -ENOMEM;
> Â Â Â Â }
>
> @@ -391,7 +392,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
> Â Â Â Â Â Â Â Â goto out;
>
> Â Â Â Â if ((status[16] & 0xF) != 1) {
> - Â Â Â Â Â Â Â pr_warn("%s: Problem switching card into high-speed mode!\n",
> + Â Â Â Â Â Â Â pr_warn("%s: problem switching card into high-speed mode!\n",
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â Â Â Â Â err = 0;
> Â Â Â Â } else {
> @@ -456,7 +457,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
> Â Â Â Â Â Â Â Â return err;
>
> Â Â Â Â if ((status[15] & 0xF) != drive_strength) {
> - Â Â Â Â Â Â Â pr_warn("%s: Problem setting drive strength!\n",
> + Â Â Â Â Â Â Â pr_warn("%s: problem setting drive strength!\n",
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â Â Â Â Â return 0;
> Â Â Â Â }
> @@ -535,7 +536,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
> Â Â Â Â Â Â Â Â return err;
>
> Â Â Â Â if ((status[16] & 0xF) != card->sd_bus_speed)
> - Â Â Â Â Â Â Â pr_warn("%s: Problem setting bus speed mode!\n",
> + Â Â Â Â Â Â Â pr_warn("%s: problem setting bus speed mode!\n",
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â else {
> Â Â Â Â Â Â Â Â mmc_set_timing(card->host, timing);
> @@ -597,7 +598,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
> Â Â Â Â Â Â Â Â return err;
>
> Â Â Â Â if (((status[15] >> 4) & 0x0F) != current_limit)
> - Â Â Â Â Â Â Â pr_warn("%s: Problem setting current limit!\n",
> + Â Â Â Â Â Â Â pr_warn("%s: problem setting current limit!\n",
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
>
> Â Â Â Â return 0;
> @@ -619,8 +620,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
>
> Â Â Â Â status = kmalloc(64, GFP_KERNEL);
> Â Â Â Â if (!status) {
> - Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for "
> - Â Â Â Â Â Â Â Â Â Â Â "switch capabilities.\n", mmc_hostname(card->host));
> + Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for switch capabilities\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> Â Â Â Â Â Â Â Â return -ENOMEM;
> Â Â Â Â }
>
> diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
> index 3d82f12..57ce052 100644
> --- a/drivers/mmc/core/sdio_bus.c
> +++ b/drivers/mmc/core/sdio_bus.c
> @@ -11,6 +11,8 @@
> Â * SDIO function driver model
> Â */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/device.h>
> Â #include <linux/err.h>
> Â #include <linux/export.h>
> diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
> index 8f6f5ac..7c87732 100644
> --- a/drivers/mmc/core/sdio_io.c
> +++ b/drivers/mmc/core/sdio_io.c
> @@ -9,6 +9,8 @@
> Â * your option) any later version.
> Â */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/export.h>
> Â #include <linux/mmc/host.h>
> Â #include <linux/mmc/card.h>
> @@ -65,7 +67,7 @@ int sdio_enable_func(struct sdio_func *func)
> Â Â Â Â BUG_ON(!func);
> Â Â Â Â BUG_ON(!func->card);
>
> - Â Â Â pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func));
> + Â Â Â pr_debug("Enabling device %s...\n", sdio_func_id(func));
>
> Â Â Â Â ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®);
> Â Â Â Â if (ret)
> @@ -90,12 +92,12 @@ int sdio_enable_func(struct sdio_func *func)
> Â Â Â Â Â Â Â Â Â Â Â Â goto err;
> Â Â Â Â }
>
> - Â Â Â pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func));
> + Â Â Â pr_debug("Enabled device %s\n", sdio_func_id(func));
>
> Â Â Â Â return 0;
>
> Â err:
> - Â Â Â pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func));
> + Â Â Â pr_debug("Failed to enable device %s\n", sdio_func_id(func));
> Â Â Â Â return ret;
> Â }
> Â EXPORT_SYMBOL_GPL(sdio_enable_func);
> @@ -115,7 +117,7 @@ int sdio_disable_func(struct sdio_func *func)
> Â Â Â Â BUG_ON(!func);
> Â Â Â Â BUG_ON(!func->card);
>
> - Â Â Â pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func));
> + Â Â Â pr_debug("Disabling device %s...\n", sdio_func_id(func));
>
> Â Â Â Â ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®);
> Â Â Â Â if (ret)
> @@ -127,12 +129,12 @@ int sdio_disable_func(struct sdio_func *func)
> Â Â Â Â if (ret)
> Â Â Â Â Â Â Â Â goto err;
>
> - Â Â Â pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func));
> + Â Â Â pr_debug("Disabled device %s\n", sdio_func_id(func));
>
> Â Â Â Â return 0;
>
> Â err:
> - Â Â Â pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func));
> + Â Â Â pr_debug("Failed to disable device %s\n", sdio_func_id(func));
> Â Â Â Â return -EIO;
> Â }
> Â EXPORT_SYMBOL_GPL(sdio_disable_func);
> diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
> index bc9e67a..533d0e5 100644
> --- a/drivers/mmc/core/sdio_irq.c
> +++ b/drivers/mmc/core/sdio_irq.c
> @@ -13,6 +13,8 @@
> Â * your option) any later version.
> Â */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/kernel.h>
> Â #include <linux/sched.h>
> Â #include <linux/kthread.h>
> @@ -47,7 +49,7 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
> Â Â Â Â ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
> Â Â Â Â if (ret) {
> Â Â Â Â Â Â Â Â pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_card_id(card), ret);
> + Â Â Â Â Â Â Â Â Â Â Â Â mmc_card_id(card), ret);
> Â Â Â Â Â Â Â Â return ret;
> Â Â Â Â }
>
> @@ -233,10 +235,10 @@ int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
> Â Â Â Â BUG_ON(!func);
> Â Â Â Â BUG_ON(!func->card);
>
> - Â Â Â pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
> + Â Â Â pr_debug("Enabling IRQ for %s...\n", sdio_func_id(func));
>
> Â Â Â Â if (func->irq_handler) {
> - Â Â Â Â Â Â Â pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
> + Â Â Â Â Â Â Â pr_debug("IRQ for %s already in use\n", sdio_func_id(func));
> Â Â Â Â Â Â Â Â return -EBUSY;
> Â Â Â Â }
>
> @@ -276,7 +278,7 @@ int sdio_release_irq(struct sdio_func *func)
> Â Â Â Â BUG_ON(!func);
> Â Â Â Â BUG_ON(!func->card);
>
> - Â Â Â pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
> + Â Â Â pr_debug("Disabling IRQ for %s...\n", sdio_func_id(func));
>
> Â Â Â Â if (func->irq_handler) {
> Â Â Â Â Â Â Â Â func->irq_handler = NULL;
> diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
> index f437c3e..d63f453 100644
> --- a/drivers/mmc/host/at91_mci.c
> +++ b/drivers/mmc/host/at91_mci.c
> @@ -968,8 +968,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
> Â Â Â Â Â Â Â Â if (at91mci_is_mci1rev2xx())
> Â Â Â Â Â Â Â Â Â Â Â Â mmc->caps |= MMC_CAP_4_BIT_DATA;
> Â Â Â Â Â Â Â Â else
> - Â Â Â Â Â Â Â Â Â Â Â dev_warn(&pdev->dev, "4 wire bus mode not supported"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " - using 1 wire\n");
> + Â Â Â Â Â Â Â Â Â Â Â dev_warn(&pdev->dev, "4 wire bus mode not supported - using 1 wire\n");
> Â Â Â Â }
>
> Â Â Â Â host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE,
> diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
> index dbd0c8a..cfd325d 100644
> --- a/drivers/mmc/host/au1xmmc.c
> +++ b/drivers/mmc/host/au1xmmc.c
> @@ -32,6 +32,8 @@
> Â * (the low to high transition will not occur).
> Â */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/module.h>
> Â #include <linux/init.h>
> Â #include <linux/platform_device.h>
> @@ -54,10 +56,11 @@
> Â /* #define DEBUG */
>
> Â #ifdef DEBUG
> -#define DBG(fmt, idx, args...) \
> - Â Â Â pr_debug("au1xmmc(%d): DEBUG: " fmt, idx, ##args)
> +#define DBG(idx, fmt, ...) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â \
> + Â Â Â pr_debug("(%d): DEBUG: " fmt, idx, ##__VA_ARGS__)
> Â #else
> -#define DBG(fmt, idx, args...) do {} while (0)
> +#define DBG(idx, fmt, ...) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â \
> + Â Â Â no_printk(fmt, ##__VA_ARGS__)
> Â #endif
>
> Â /* Hardware definitions */
> @@ -277,8 +280,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
> Â Â Â Â Â Â Â Â mmccmd |= SD_CMD_RT_3;
> Â Â Â Â Â Â Â Â break;
> Â Â Â Â default:
> - Â Â Â Â Â Â Â pr_info("au1xmmc: unhandled response type %02x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_resp_type(cmd));
> + Â Â Â Â Â Â Â pr_info("unhandled response type %02x\n", mmc_resp_type(cmd));
> Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â }
>
> @@ -478,19 +480,19 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
> Â Â Â Â Â Â Â Â Â Â Â Â break;
>
> Â Â Â Â Â Â Â Â if (status & SD_STATUS_RC) {
> - Â Â Â Â Â Â Â Â Â Â Â DBG("RX CRC Error [%d + %d].\n", host->pdev->id,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio.len, count);
> + Â Â Â Â Â Â Â Â Â Â Â DBG(host->pdev->id, "RX CRC Error [%d + %d]\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio.len, count);
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â }
>
> Â Â Â Â Â Â Â Â if (status & SD_STATUS_RO) {
> - Â Â Â Â Â Â Â Â Â Â Â DBG("RX Overrun [%d + %d]\n", host->pdev->id,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio.len, count);
> + Â Â Â Â Â Â Â Â Â Â Â DBG(host->pdev->id, "RX Overrun [%d + %d]\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio.len, count);
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â else if (status & SD_STATUS_RU) {
> - Â Â Â Â Â Â Â Â Â Â Â DBG("RX Underrun [%d + %d]\n", host->pdev->id,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio.len, Â count);
> + Â Â Â Â Â Â Â Â Â Â Â DBG(host->pdev->id, "RX Underrun [%d + %d]\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio.len, count);
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â }
>
> @@ -835,8 +837,7 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
> Â Â Â Â Â Â Â Â Â Â Â Â au1xmmc_receive_pio(host);
>
> Â Â Â Â } else if (status & 0x203F3C70) {
> - Â Â Â Â Â Â Â Â Â Â Â DBG("Unhandled status %8.8x\n", host->pdev->id,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â status);
> + Â Â Â Â Â Â Â Â Â Â Â DBG(host->pdev->id, "Unhandled status %8.8x\n", status);
> Â Â Â Â }
>
> Â Â Â Â au_writel(status, HOST_STATUS(host));
> @@ -1050,7 +1051,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
> Â Â Â Â if (has_dbdma()) {
> Â Â Â Â Â Â Â Â ret = au1xmmc_dbdma_init(host);
> Â Â Â Â Â Â Â Â if (ret)
> - Â Â Â Â Â Â Â Â Â Â Â pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
> + Â Â Â Â Â Â Â Â Â Â Â pr_info("DBDMA init failed; using PIO\n");
> Â Â Â Â }
>
> Â #ifdef CONFIG_LEDS_CLASS
> @@ -1075,8 +1076,8 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
>
> Â Â Â Â platform_set_drvdata(pdev, host);
>
> - Â Â Â pr_info(DRIVER_NAME ": MMC Controller %d set up at %8.8X"
> - Â Â Â Â Â Â Â " (mode=%s)\n", pdev->id, host->iobase,
> + Â Â Â pr_info("MMC Controller %d set up at %8.8X (mode=%s)\n",
> + Â Â Â Â Â Â Â pdev->id, host->iobase,
> Â Â Â Â Â Â Â Â host->flags & HOST_F_DMA ? "dma" : "pio");
>
> Â Â Â Â return 0; Â Â Â /* all ok */
> @@ -1206,7 +1207,7 @@ static int __init au1xmmc_init(void)
> Â Â Â Â Â Â Â Â */
> Â Â Â Â Â Â Â Â memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
> Â Â Â Â Â Â Â Â if (!memid)
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("au1xmmc: cannot add memory dbdma\n");
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("cannot add memory dbdma\n");
> Â Â Â Â }
> Â Â Â Â return platform_driver_register(&au1xmmc_driver);
> Â }
> diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
> index 0371bf5..780a1eb 100644
> --- a/drivers/mmc/host/bfin_sdh.c
> +++ b/drivers/mmc/host/bfin_sdh.c
> @@ -162,8 +162,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
> Â Â Â Â Â Â Â Â Â Â Â Â host->sg_cpu[i].cfg = dma_cfg;
> Â Â Â Â Â Â Â Â Â Â Â Â host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
> Â Â Â Â Â Â Â Â Â Â Â Â host->sg_cpu[i].x_modify = 4;
> - Â Â Â Â Â Â Â Â Â Â Â dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
> + Â Â Â Â Â Â Â Â Â Â Â dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â i, host->sg_cpu[i].start_addr,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->sg_cpu[i].x_modify);
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 3aaeb08..5d34c01 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -554,8 +554,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
>             div = (host->bus_hz  / slot->clock) >> 1;
>
> Â Â Â Â Â Â Â Â dev_info(&slot->mmc->class_dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
> - Â Â Â Â Â Â Â Â Â Â Â Â " div = %d)\n", slot->id, host->bus_hz, slot->clock,
> + Â Â Â Â Â Â Â Â Â Â Â Â "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â slot->id, host->bus_hz, slot->clock,
> Â Â Â Â Â Â Â Â Â Â Â Â div ? ((host->bus_hz / div) >> 1) : host->bus_hz, div);
>
> Â Â Â Â Â Â Â Â /* disable clock */
> @@ -942,8 +942,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â data->error = -ETIMEDOUT;
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â } else {
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_err(&host->pdev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "data FIFO error "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "(status=%08x)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "data FIFO error (status=%08x)\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â status);
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â data->error = -EIO;
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â }
> @@ -1776,8 +1775,8 @@ static void dw_mci_init_dma(struct dw_mci *host)
>
> Â Â Â Â if (host->dma_ops->init) {
> Â Â Â Â Â Â Â Â if (host->dma_ops->init(host)) {
> - Â Â Â Â Â Â Â Â Â Â Â dev_err(&host->pdev->dev, "%s: Unable to initialize "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "DMA Controller.\n", __func__);
> + Â Â Â Â Â Â Â Â Â Â Â dev_err(&host->pdev->dev, "%s: Unable to initialize DMA Controller\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â __func__);
> Â Â Â Â Â Â Â Â Â Â Â Â goto no_dma;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } else {
> @@ -1985,9 +1984,8 @@ static int dw_mci_probe(struct platform_device *pdev)
> Â Â Â Â Â Â Â Â Â DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
> Â Â Â Â mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
>
> - Â Â Â dev_info(&pdev->dev, "DW MMC controller at irq %d, "
> - Â Â Â Â Â Â Â Â "%d bit host data width, "
> - Â Â Â Â Â Â Â Â "%u deep fifo\n",
> + Â Â Â dev_info(&pdev->dev,
> + Â Â Â "DW MMC controller at irq %d, %d bit host data width, %u deep fifo\n",
> Â Â Â Â Â Â Â Â irq, width, fifo_size);
I think that tab is needed this "DW MMC controller at irq ...." ?
> Â Â Â Â if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
> Â Â Â Â Â Â Â Â dev_info(&pdev->dev, "Internal DMAC interrupt fix enabled.\n");
> diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
> index 92946b8..f77899f 100644
> --- a/drivers/mmc/host/mmc_spi.c
> +++ b/drivers/mmc/host/mmc_spi.c
> @@ -860,9 +860,9 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
>
> Â Â Â Â Â Â Â Â be16_to_cpus(&scratch->crc_val);
> Â Â Â Â Â Â Â Â if (scratch->crc_val != crc) {
> - Â Â Â Â Â Â Â Â Â Â Â dev_dbg(&spi->dev, "read - crc error: crc_val=0x%04x, "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "computed=0x%04x len=%d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â scratch->crc_val, crc, t->len);
> + Â Â Â Â Â Â Â Â Â Â Â dev_dbg(&spi->dev,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "read - crc error: crc_val=0x%04x, computed=0x%04x len=%d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â scratch->crc_val, crc, t->len);
> Â Â Â Â Â Â Â Â Â Â Â Â return -EILSEQ;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -1253,8 +1253,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mres = spi_setup(host->spi);
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â if (mres < 0)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_dbg(&host->spi->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "switch back to SPI mode 3"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " failed\n");
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "switch back to SPI mode 3 failed\n");
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â }
>
> diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
> index 0ea9935..33b3cd1 100644
> --- a/drivers/mmc/host/mmci.c
> +++ b/drivers/mmc/host/mmci.c
> @@ -1229,8 +1229,7 @@ static int __devinit mmci_probe(struct amba_device *dev,
> Â Â Â Â Â Â Â Â Â Â Â Â host->mmc->ocr_avail = (u32) mask;
> Â Â Â Â Â Â Â Â Â Â Â Â if (plat->ocr_mask)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_warn(&dev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "Provided ocr_mask/setpower will not be used "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "(using regulator instead)\n");
> +"Provided ocr_mask/setpower will not be used (using regulator instead)\n");
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> Â #endif
> diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
> index 211a495..93012a0 100644
> --- a/drivers/mmc/host/mvsdio.c
> +++ b/drivers/mmc/host/mvsdio.c
> @@ -84,9 +84,9 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
> Â Â Â Â Â Â Â Â Â Â Â Â hw_state = mvsd_read(MVSD_HW_STATE);
> Â Â Â Â Â Â Â Â Â Â Â Â count++;
> Â Â Â Â Â Â Â Â } while (!(hw_state & (1 << 13)));
> - Â Â Â Â Â Â Â dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "(hw=0x%04x, count=%d, jiffies=%ld)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â hw_state, count, jiffies - (t - HZ));
> + Â Â Â Â Â Â Â dev_dbg(host->dev,
> +"*** wait for FIFO_EMPTY bit (hw=0x%04x, count=%d, jiffies=%ld)\n",
> + Â Â Â Â Â Â Â Â Â Â Â hw_state, count, jiffies - (t - HZ));
> Â Â Â Â }
>
> Â Â Â Â /* If timeout=0 then maximum timeout index is used. */
> @@ -117,10 +117,9 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
> Â Â Â Â Â Â Â Â host->pio_size = data->blocks * data->blksz;
> Â Â Â Â Â Â Â Â host->pio_ptr = sg_virt(data->sg);
> Â Â Â Â Â Â Â Â if (!nodma)
> - Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: fallback to PIO for data "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "at 0x%p size %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio_ptr, host->pio_size);
> + Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: fallback to PIO for data at 0x%p size %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc),
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio_ptr, host->pio_size);
> Â Â Â Â Â Â Â Â return 1;
> Â Â Â Â } else {
> Â Â Â Â Â Â Â Â dma_addr_t phys_addr;
> @@ -489,9 +488,9 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
> Â Â Â Â if (irq_handled)
> Â Â Â Â Â Â Â Â return IRQ_HANDLED;
>
> - Â Â Â pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
> - Â Â Â Â Â Â Â Â Â Â Â "pio=%d\n", mmc_hostname(host->mmc), intr_status,
> - Â Â Â Â Â Â Â Â Â Â Â host->intr_en, host->pio_size);
> + Â Â Â pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
> + Â Â Â Â Â Â Â mmc_hostname(host->mmc), intr_status,
> + Â Â Â Â Â Â Â host->intr_en, host->pio_size);
> Â Â Â Â return IRQ_NONE;
> Â }
>
> @@ -505,13 +504,13 @@ static void mvsd_timeout_timer(unsigned long data)
> Â Â Â Â spin_lock_irqsave(&host->lock, flags);
> Â Â Â Â mrq = host->mrq;
> Â Â Â Â if (mrq) {
> - Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware interrupt.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> - Â Â Â Â Â Â Â pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "intr_en=0x%04x\n", mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_HW_STATE),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_NOR_INTR_STATUS),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_NOR_INTR_EN));
> + Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware interrupt\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â pr_err("%s: hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc),
> + Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_HW_STATE),
> + Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_NOR_INTR_STATUS),
> + Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_NOR_INTR_EN));
>
> Â Â Â Â Â Â Â Â host->mrq = NULL;
>
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index 1455bd6..dd5159b 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -1264,9 +1264,8 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
> Â Â Â Â host->reqs_blocked = 0;
> Â Â Â Â if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
> Â Â Â Â Â Â Â Â if (host->protect_card) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: cover is closed, "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "card is now accessible\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: cover is closed, card is now accessible\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> Â Â Â Â Â Â Â Â Â Â Â Â host->protect_card = 0;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } else {
> @@ -1967,8 +1966,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
>
> Â Â Â Â Â Â Â Â if (host->got_dbclk)
> Â Â Â Â Â Â Â Â Â Â Â Â if (clk_enable(host->dbclk) != 0)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " clk failed\n");
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_dbg(mmc_dev(host->mmc), "Enabling debounce clk failed\n");
> Â Â Â Â }
>
> Â Â Â Â /* Since we do only SG emulation, we can have as many segs
> @@ -2169,8 +2167,7 @@ static int omap_hsmmc_suspend(struct device *dev)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->slot_id);
> Â Â Â Â Â Â Â Â Â Â Â Â if (ret) {
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_dbg(mmc_dev(host->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "Unable to handle MMC board"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " level suspend\n");
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "Unable to handle MMC board level suspend\n");
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->suspended = 0;
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â return ret;
> Â Â Â Â Â Â Â Â Â Â Â Â }
> diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
> index 6878a94..67c5751 100644
> --- a/drivers/mmc/host/sdhci-pci.c
> +++ b/drivers/mmc/host/sdhci-pci.c
> @@ -460,8 +460,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
>
> Â Â Â Â Â Â Â Â if (sd_dev) {
> Â Â Â Â Â Â Â Â Â Â Â Â pci_dev_put(sd_dev);
> - Â Â Â Â Â Â Â Â Â Â Â dev_info(&chip->pdev->dev, "Refusing to bind to "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "secondary interface.\n");
> + Â Â Â Â Â Â Â Â Â Â Â dev_info(&chip->pdev->dev, "Refusing to bind to secondary interface\n");
> Â Â Â Â Â Â Â Â Â Â Â Â return -ENODEV;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -628,10 +627,10 @@ static int syskt_probe_slot(struct sdhci_pci_slot *slot)
>
> Â Â Â Â u8 board_rev = readb(slot->host->ioaddr + SYSKT_BOARD_REV);
> Â Â Â Â u8 Â chip_rev = readb(slot->host->ioaddr + SYSKT_CHIP_REV);
> - Â Â Â dev_info(&slot->chip->pdev->dev, "SysKonnect CardBus2SDIO, "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "board rev %d.%d, chip rev %d.%d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â board_rev >> 4, board_rev & 0xf,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â chip_rev >> 4, Â chip_rev & 0xf);
> + Â Â Â dev_info(&slot->chip->pdev->dev,
> + Â Â Â Â Â Â Â Â "SysKonnect CardBus2SDIO, board rev %d.%d, chip rev %d.%d\n",
> + Â Â Â Â Â Â Â Â board_rev >> 4, board_rev & 0xf,
> + Â Â Â Â Â Â Â Â chip_rev >> 4, Â chip_rev & 0xf);
> Â Â Â Â if (chip_rev >= 0x20)
> Â Â Â Â Â Â Â Â slot->host->quirks |= SDHCI_QUIRK_FORCE_DMA;
>
> @@ -925,8 +924,7 @@ static int sdhci_pci_enable_dma(struct sdhci_host *host)
> Â Â Â Â if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) &&
> Â Â Â Â Â Â Â Â ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
> Â Â Â Â Â Â Â Â (host->flags & SDHCI_USE_SDMA)) {
> - Â Â Â Â Â Â Â dev_warn(&pdev->dev, "Will use DMA mode even though HW "
> - Â Â Â Â Â Â Â Â Â Â Â "doesn't fully claim to support it.\n");
> + Â Â Â Â Â Â Â dev_warn(&pdev->dev, "Will use DMA mode even though HW doesn't fully claim to support it\n");
> Â Â Â Â }
>
> Â Â Â Â ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
> @@ -1202,8 +1200,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
> Â Â Â Â }
>
> Â Â Â Â if (pci_resource_len(pdev, bar) != 0x100) {
> - Â Â Â Â Â Â Â dev_err(&pdev->dev, "Invalid iomem size. You may "
> - Â Â Â Â Â Â Â Â Â Â Â "experience problems.\n");
> + Â Â Â Â Â Â Â dev_err(&pdev->dev, "Invalid iomem size. You may experience problems.\n");
> Â Â Â Â }
>
> Â Â Â Â if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index 15673a7..0d8f061 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -82,11 +82,8 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
> Â Â Â Â Â Â Â Â Â Â Â Â && power_mode == MMC_POWER_ON) {
>
> Â Â Â Â Â Â Â Â dev_dbg(mmc_dev(host->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "%s: slot->power_mode = %d,"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "ios->power_mode = %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â __func__,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pxa->power_mode,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â power_mode);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "%s: slot->power_mode = %d, ios->power_mode = %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â __func__, pxa->power_mode, power_mode);
>
> Â Â Â Â Â Â Â Â /* set we want notice of when 74 clocks are sent */
> Â Â Â Â Â Â Â Â tmp = readw(host->ioaddr + SD_CE_ATA_2);
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index d146bff..d31c31d 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -13,6 +13,8 @@
> Â * Â Â - JMicron (hardware and technical support)
> Â */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/delay.h>
> Â #include <linux/highmem.h>
> Â #include <linux/io.h>
> @@ -32,8 +34,8 @@
>
> Â #define DRIVER_NAME "sdhci"
>
> -#define DBG(f, x...) \
> - Â Â Â pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
> +#define DBG(fmt, ...) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â \
> + Â Â Â pr_debug("[%s()]: " fmt, __func__, ##__VA_ARGS__)
>
> Â #if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
> Â Â Â Â defined(CONFIG_MMC_SDHCI_MODULE))
> @@ -68,51 +70,51 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
>
> Â static void sdhci_dumpregs(struct sdhci_host *host)
> Â {
> - Â Â Â pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
> - Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> -
> - Â Â Â pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: Â 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_DMA_ADDRESS),
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_HOST_VERSION));
> - Â Â Â pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: Â 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_BLOCK_SIZE),
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_BLOCK_COUNT));
> - Â Â Â pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_ARGUMENT),
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_TRANSFER_MODE));
> - Â Â Â pr_debug(DRIVER_NAME ": Present: Â 0x%08x | Host ctl: 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_PRESENT_STATE),
> - Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_HOST_CONTROL));
> - Â Â Â pr_debug(DRIVER_NAME ": Power: Â Â 0x%08x | Blk gap: Â 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_POWER_CONTROL),
> - Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
> - Â Â Â pr_debug(DRIVER_NAME ": Wake-up: Â 0x%08x | Clock: Â Â 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_CLOCK_CONTROL));
> - Â Â Â pr_debug(DRIVER_NAME ": Timeout: Â 0x%08x | Int stat: 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_INT_STATUS));
> - Â Â Â pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_INT_ENABLE),
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
> - Â Â Â pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_ACMD12_ERR),
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
> - Â Â Â pr_debug(DRIVER_NAME ": Caps: Â Â 0x%08x | Caps_1: Â 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_CAPABILITIES),
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_CAPABILITIES_1));
> - Â Â Â pr_debug(DRIVER_NAME ": Cmd: Â Â Â 0x%08x | Max curr: 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_COMMAND),
> - Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_MAX_CURRENT));
> - Â Â Â pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
> - Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_HOST_CONTROL2));
> + Â Â Â pr_debug("=========== REGISTER DUMP (%s)===========\n",
> + Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> +
> + Â Â Â pr_debug("Sys addr: 0x%08x | Version: Â 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_DMA_ADDRESS),
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_HOST_VERSION));
> + Â Â Â pr_debug("Blk size: 0x%08x | Blk cnt: Â 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_BLOCK_SIZE),
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_BLOCK_COUNT));
> + Â Â Â pr_debug("Argument: 0x%08x | Trn mode: 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_ARGUMENT),
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_TRANSFER_MODE));
> + Â Â Â pr_debug("Present: Â 0x%08x | Host ctl: 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_PRESENT_STATE),
> + Â Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_HOST_CONTROL));
> + Â Â Â pr_debug("Power: Â Â 0x%08x | Blk gap: Â 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_POWER_CONTROL),
> + Â Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
> + Â Â Â pr_debug("Wake-up: Â 0x%08x | Clock: Â Â 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_CLOCK_CONTROL));
> + Â Â Â pr_debug("Timeout: Â 0x%08x | Int stat: 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_INT_STATUS));
> + Â Â Â pr_debug("Int enab: 0x%08x | Sig enab: 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_INT_ENABLE),
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
> + Â Â Â pr_debug("AC12 err: 0x%08x | Slot int: 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_ACMD12_ERR),
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
> + Â Â Â pr_debug("Caps: Â Â 0x%08x | Caps_1: Â 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_CAPABILITIES),
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_CAPABILITIES_1));
> + Â Â Â pr_debug("Cmd: Â Â Â 0x%08x | Max curr: 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_COMMAND),
> + Â Â Â Â Â Â Â Â sdhci_readl(host, SDHCI_MAX_CURRENT));
> + Â Â Â pr_debug("Host ctl2: 0x%08x\n",
> + Â Â Â Â Â Â Â Â sdhci_readw(host, SDHCI_HOST_CONTROL2));
>
> Â Â Â Â if (host->flags & SDHCI_USE_ADMA)
> - Â Â Â Â Â Â Â pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
> - Â Â Â Â Â Â Â Â Â Â Â readl(host->ioaddr + SDHCI_ADMA_ERROR),
> - Â Â Â Â Â Â Â Â Â Â Â readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
> + Â Â Â Â Â Â Â pr_debug("ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â readl(host->ioaddr + SDHCI_ADMA_ERROR),
> + Â Â Â Â Â Â Â Â Â Â Â Â readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
>
> - Â Â Â pr_debug(DRIVER_NAME ": ===========================================\n");
> + Â Â Â pr_debug("===========================================\n");
> Â }
>
> Â /*****************************************************************************\
> @@ -417,7 +419,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â }
>
> - Â Â Â DBG("PIO transfer complete.\n");
> + Â Â Â DBG("PIO transfer complete\n");
> Â }
>
> Â static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
> @@ -745,9 +747,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> Â Â Â Â Â Â Â Â if (unlikely(broken)) {
> Â Â Â Â Â Â Â Â Â Â Â Â for_each_sg(data->sg, sg, data->sg_len, i) {
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â if (sg->length & 0x3) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â DBG("Reverting to PIO because of "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "transfer size (%d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â sg->length);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â DBG("Reverting to PIO because of transfer size (%d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â sg->length);
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->flags &= ~SDHCI_REQ_USE_DMA;
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â }
> @@ -780,8 +781,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> Â Â Â Â Â Â Â Â if (unlikely(broken)) {
> Â Â Â Â Â Â Â Â Â Â Â Â for_each_sg(data->sg, sg, data->sg_len, i) {
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â if (sg->offset & 0x3) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â DBG("Reverting to PIO because of "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "bad alignment\n");
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â DBG("Reverting to PIO because of bad alignment\n");
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->flags &= ~SDHCI_REQ_USE_DMA;
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â }
> @@ -972,8 +972,8 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
>
> Â Â Â Â while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
> Â Â Â Â Â Â Â Â if (timeout == 0) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Controller never released "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "inhibit bit(s).\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Controller never released inhibit bit(s)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> Â Â Â Â Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
> Â Â Â Â Â Â Â Â Â Â Â Â cmd->error = -EIO;
> Â Â Â Â Â Â Â Â Â Â Â Â tasklet_schedule(&host->finish_tasklet);
> @@ -1154,8 +1154,8 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> Â Â Â Â while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> Â Â Â Â Â Â Â Â & SDHCI_CLOCK_INT_STABLE)) {
> Â Â Â Â Â Â Â Â if (timeout == 0) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Internal clock never "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "stabilised.\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Internal clock never stabilised\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> Â Â Â Â Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
> Â Â Â Â Â Â Â Â Â Â Â Â return;
> Â Â Â Â Â Â Â Â }
> @@ -1592,8 +1592,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
> Â Â Â Â Â Â Â Â if (!(ctrl & SDHCI_CTRL_VDD_180))
> Â Â Â Â Â Â Â Â Â Â Â Â return 0;
> Â Â Â Â Â Â Â Â else {
> - Â Â Â Â Â Â Â Â Â Â Â pr_info(DRIVER_NAME ": Switching to 3.3V "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "signalling voltage failed\n");
> + Â Â Â Â Â Â Â Â Â Â Â pr_info("Switching to 3.3V signalling voltage failed\n");
> Â Â Â Â Â Â Â Â Â Â Â Â return -EIO;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
> @@ -1651,8 +1650,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
> Â Â Â Â Â Â Â Â pwr |= SDHCI_POWER_ON;
> Â Â Â Â Â Â Â Â sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
>
> - Â Â Â Â Â Â Â pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
> - Â Â Â Â Â Â Â Â Â Â Â "voltage failed, retrying with S18R set to 0\n");
> + Â Â Â Â Â Â Â pr_info("Switching to 1.8V signalling voltage failed, retrying with S18R set to 0\n");
> Â Â Â Â Â Â Â Â return -EAGAIN;
> Â Â Â Â } else
> Â Â Â Â Â Â Â Â /* No signal voltage switch required */
> @@ -1774,10 +1772,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
> Â Â Â Â Â Â Â Â spin_lock(&host->lock);
>
> Â Â Â Â Â Â Â Â if (!host->tuning_done) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_info(DRIVER_NAME ": Timeout waiting for "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "Buffer Read Ready interrupt during tuning "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "procedure, falling back to fixed sampling "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "clock\n");
> + Â Â Â Â Â Â Â Â Â Â Â pr_info("Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n");
> Â Â Â Â Â Â Â Â Â Â Â Â ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> Â Â Â Â Â Â Â Â Â Â Â Â ctrl &= ~SDHCI_CTRL_TUNED_CLK;
> Â Â Â Â Â Â Â Â Â Â Â Â ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
> @@ -1804,9 +1799,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
> Â Â Â Â Â Â Â Â sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
> Â Â Â Â } else {
> Â Â Â Â Â Â Â Â if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_info(DRIVER_NAME ": Tuning procedure"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " failed, falling back to fixed sampling"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " clock\n");
> + Â Â Â Â Â Â Â Â Â Â Â pr_info("Tuning procedure failed, falling back to fixed sampling clock\n");
> Â Â Â Â Â Â Â Â Â Â Â Â err = -EIO;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -2010,8 +2003,8 @@ static void sdhci_timeout_timer(unsigned long data)
> Â Â Â Â spin_lock_irqsave(&host->lock, flags);
>
> Â Â Â Â if (host->mrq) {
> - Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware "
> - Â Â Â Â Â Â Â Â Â Â Â "interrupt.\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware interrupt\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
>
> Â Â Â Â Â Â Â Â if (host->data) {
> @@ -2056,9 +2049,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
> Â Â Â Â BUG_ON(intmask == 0);
>
> Â Â Â Â if (!host->cmd) {
> - Â Â Â Â Â Â Â pr_err("%s: Got command interrupt 0x%08x even "
> - Â Â Â Â Â Â Â Â Â Â Â "though no command operation was in progress.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), (unsigned)intmask);
> + Â Â Â Â Â Â Â pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), (unsigned)intmask);
> Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
> Â Â Â Â Â Â Â Â return;
> Â Â Â Â }
> @@ -2087,8 +2079,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
> Â Â Â Â */
> Â Â Â Â if (host->cmd->flags & MMC_RSP_BUSY) {
> Â Â Â Â Â Â Â Â if (host->cmd->data)
> - Â Â Â Â Â Â Â Â Â Â Â DBG("Cannot wait for busy signal when also "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "doing a data transfer");
> + Â Â Â Â Â Â Â Â Â Â Â DBG("Cannot wait for busy signal when also doing a data transfer\n");
> Â Â Â Â Â Â Â Â else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
> Â Â Â Â Â Â Â Â Â Â Â Â return;
>
> @@ -2156,9 +2147,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â }
>
> - Â Â Â Â Â Â Â pr_err("%s: Got data interrupt 0x%08x even "
> - Â Â Â Â Â Â Â Â Â Â Â "though no data operation was in progress.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), (unsigned)intmask);
> + Â Â Â Â Â Â Â pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), (unsigned)intmask);
> Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
>
> Â Â Â Â Â Â Â Â return;
> @@ -2204,10 +2194,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SDHCI_DEFAULT_BOUNDARY_SIZE;
> Â Â Â Â Â Â Â Â Â Â Â Â host->data->bytes_xfered = dmanow - dmastart;
> - Â Â Â Â Â Â Â Â Â Â Â DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " next 0x%08x\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), dmastart,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->data->bytes_xfered, dmanow);
> + Â Â Â Â Â Â Â Â Â Â Â DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), dmastart,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â host->data->bytes_xfered, dmanow);
> Â Â Â Â Â Â Â Â Â Â Â Â sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
> Â Â Â Â Â Â Â Â }
>
> @@ -2250,7 +2239,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
> Â Â Â Â }
>
> Â Â Â Â DBG("*** %s got interrupt: 0x%08x\n",
> - Â Â Â Â Â Â Â mmc_hostname(host->mmc), intmask);
> + Â Â Â Â Â mmc_hostname(host->mmc), intmask);
>
> Â Â Â Â if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
> Â Â Â Â Â Â Â Â u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
> @@ -2548,9 +2537,8 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â host->version = (host->version & SDHCI_SPEC_VER_MASK)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â >> SDHCI_SPEC_VER_SHIFT;
> Â Â Â Â if (host->version > SDHCI_SPEC_300) {
> - Â Â Â Â Â Â Â pr_err("%s: Unknown controller version (%d). "
> - Â Â Â Â Â Â Â Â Â Â Â "You may experience problems.\n", mmc_hostname(mmc),
> - Â Â Â Â Â Â Â Â Â Â Â host->version);
> + Â Â Â Â Â Â Â pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc), host->version);
> Â Â Â Â }
>
> Â Â Â Â caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
> @@ -2631,8 +2619,8 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â if (host->max_clk == 0 || host->quirks &
> Â Â Â Â Â Â Â Â Â Â Â Â SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
> Â Â Â Â Â Â Â Â if (!host->ops->get_max_clock) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't specify base clock "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "frequency.\n", mmc_hostname(mmc));
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't specify base clock frequency\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> Â Â Â Â Â Â Â Â Â Â Â Â return -ENODEV;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â host->max_clk = host->ops->get_max_clock(host);
> @@ -2677,8 +2665,8 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â Â Â Â Â Â Â Â Â host->timeout_clk = host->ops->get_timeout_clock(host);
> Â Â Â Â Â Â Â Â } else if (!(host->quirks &
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't specify timeout clock "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "frequency.\n", mmc_hostname(mmc));
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't specify timeout clock frequency\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> Â Â Â Â Â Â Â Â Â Â Â Â return -ENODEV;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -2845,8 +2833,8 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â Â Â Â Â mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
>
> Â Â Â Â if (mmc->ocr_avail == 0) {
> - Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't report any "
> - Â Â Â Â Â Â Â Â Â Â Â "support voltages.\n", mmc_hostname(mmc));
> + Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't report any support voltages\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> Â Â Â Â Â Â Â Â return -ENODEV;
> Â Â Â Â }
>
> @@ -2994,8 +2982,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
> Â Â Â Â Â Â Â Â host->flags |= SDHCI_DEVICE_DEAD;
>
> Â Â Â Â Â Â Â Â if (host->mrq) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Controller removed during "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " transfer!\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Controller removed during transfer!\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
>
> Â Â Â Â Â Â Â Â Â Â Â Â host->mrq->cmd->error = -ENOMEDIUM;
> Â Â Â Â Â Â Â Â Â Â Â Â tasklet_schedule(&host->finish_tasklet);
> @@ -3053,9 +3041,8 @@ EXPORT_SYMBOL_GPL(sdhci_free_host);
>
> Â static int __init sdhci_drv_init(void)
> Â {
> - Â Â Â pr_info(DRIVER_NAME
> - Â Â Â Â Â Â Â ": Secure Digital Host Controller Interface driver\n");
> - Â Â Â pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
> + Â Â Â pr_info("Secure Digital Host Controller Interface driver\n");
> + Â Â Â pr_info("Copyright(c) Pierre Ossman\n");
>
> Â Â Â Â return 0;
> Â }
> diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
> index 7009f17..1e30245 100644
> --- a/drivers/mmc/host/sdricoh_cs.c
> +++ b/drivers/mmc/host/sdricoh_cs.c
> @@ -310,8 +310,8 @@ static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
>
> Â Â Â Â /* transfer data */
> Â Â Â Â if (data && cmd->error == 0) {
> - Â Â Â Â Â Â Â dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i "
> - Â Â Â Â Â Â Â Â Â Â Â "sg length %i\n", data->blksz, data->blocks,
> + Â Â Â Â Â Â Â dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i sg length %i\n",
> + Â Â Â Â Â Â Â Â Â Â Â data->blksz, data->blocks,
> Â Â Â Â Â Â Â Â Â Â Â Â data->sg_len, data->sg->length);
>
> Â Â Â Â Â Â Â Â /* enter data reading mode */
> @@ -330,8 +330,8 @@ static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
> Â Â Â Â Â Â Â Â Â Â Â Â kunmap(page);
> Â Â Â Â Â Â Â Â Â Â Â Â flush_dcache_page(page);
> Â Â Â Â Â Â Â Â Â Â Â Â if (result) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_err(dev, "sdricoh_request: cmd %i "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "block transfer failed\n", cmd->opcode);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_err(dev, "sdricoh_request: cmd %i block transfer failed\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â cmd->opcode);
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â cmd->error = result;
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â Â Â Â Â } else
> @@ -476,8 +476,8 @@ static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev)
> Â {
> Â Â Â Â struct pci_dev *pci_dev = NULL;
>
> - Â Â Â dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
> - Â Â Â Â Â Â Â " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
> + Â Â Â dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device %s %s ...\n",
> + Â Â Â Â Â Â Â Â pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
>
> Â Â Â Â /* search pci cardbus bridge that contains the mmc controller */
> Â Â Â Â /* the io region is already claimed by yenta_socket... */
> diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
> index 55d6c60..d432597 100644
> --- a/drivers/mmc/host/tifm_sd.c
> +++ b/drivers/mmc/host/tifm_sd.c
> @@ -787,9 +787,9 @@ static void tifm_sd_abort(unsigned long data)
> Â {
> Â Â Â Â struct tifm_sd *host = (struct tifm_sd*)data;
>
> - Â Â Â pr_err("%s : card failed to respond for a long period of time "
> - Â Â Â Â Â Â Â "(%x, %x)\n",
> - Â Â Â Â Â Â Â dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags);
> + Â Â Â pr_err("%s : card failed to respond for a long period of time (%x, %x)\n",
> + Â Â Â Â Â Â Â dev_name(&host->dev->dev),
> + Â Â Â Â Â Â Â host->req->cmd->opcode, host->cmd_flags);
>
> Â Â Â Â tifm_eject(host->dev);
> Â }
> @@ -803,8 +803,7 @@ static void tifm_sd_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>
> Â Â Â Â spin_lock_irqsave(&sock->lock, flags);
>
> - Â Â Â dev_dbg(&sock->dev, "ios: clock = %u, vdd = %x, bus_mode = %x, "
> - Â Â Â Â Â Â Â "chip_select = %x, power_mode = %x, bus_width = %x\n",
> + Â Â Â dev_dbg(&sock->dev, "ios: clock = %u, vdd = %x, bus_mode = %x, chip_select = %x, power_mode = %x, bus_width = %x\n",
> Â Â Â Â Â Â Â Â ios->clock, ios->vdd, ios->bus_mode, ios->chip_select,
> Â Â Â Â Â Â Â Â ios->power_mode, ios->bus_width);
>
> diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
> index 4b83c43..dc479b0 100644
> --- a/drivers/mmc/host/via-sdmmc.c
> +++ b/drivers/mmc/host/via-sdmmc.c
> @@ -8,6 +8,8 @@
> Â * your option) any later version.
> Â */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/pci.h>
> Â #include <linux/module.h>
> Â #include <linux/dma-mapping.h>
> @@ -838,8 +840,7 @@ static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
> Â Â Â Â BUG_ON(intmask == 0);
>
> Â Â Â Â if (!host->cmd) {
> - Â Â Â Â Â Â Â pr_err("%s: Got command interrupt 0x%x even "
> - Â Â Â Â Â Â Â Â Â Â Â "though no command operation was in progress.\n",
> + Â Â Â Â Â Â Â pr_err("%s: Got command interrupt 0x%x even though no command operation was in progress\n",
> Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), intmask);
> Â Â Â Â Â Â Â Â return;
> Â Â Â Â }
> @@ -941,8 +942,8 @@ static void via_sdc_timeout(unsigned long ulongdata)
> Â Â Â Â spin_lock_irqsave(&sdhost->lock, flags);
>
> Â Â Â Â if (sdhost->mrq) {
> - Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware interrupt."
> - Â Â Â Â Â Â Â Â Â Â Â "cmd:0x%x\n", mmc_hostname(sdhost->mmc),
> + Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware interrupt.cmd:0x%x\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(sdhost->mmc),
> Â Â Â Â Â Â Â Â Â Â Â sdhost->mrq->cmd->opcode);
>
> Â Â Â Â Â Â Â Â if (sdhost->data) {
> @@ -1091,8 +1092,7 @@ static int __devinit via_sd_probe(struct pci_dev *pcidev,
> Â Â Â Â u8 Â gatt;
> Â Â Â Â int ret;
>
> - Â Â Â pr_info(DRV_NAME
> - Â Â Â Â Â Â Â ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
> + Â Â Â pr_info("VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
> Â Â Â Â Â Â Â Â pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
> Â Â Â Â Â Â Â Â (int)pcidev->revision);
>
> @@ -1192,8 +1192,8 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
> Â Â Â Â mmiowb();
>
> Â Â Â Â if (sdhost->mrq) {
> - Â Â Â Â Â Â Â pr_err("%s: Controller removed during "
> - Â Â Â Â Â Â Â Â Â Â Â "transfer\n", mmc_hostname(sdhost->mmc));
> + Â Â Â Â Â Â Â pr_err("%s: Controller removed during transfer\n",
> + Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(sdhost->mmc));
>
> Â Â Â Â Â Â Â Â /* make sure all DMA is stopped */
> Â Â Â Â Â Â Â Â writel(VIA_CRDR_DMACTRL_SFTRST,
> @@ -1225,8 +1225,7 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
> Â Â Â Â pci_release_regions(pcidev);
> Â Â Â Â pci_disable_device(pcidev);
>
> - Â Â Â pr_info(DRV_NAME
> - Â Â Â Â Â Â Â ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
> + Â Â Â pr_info("VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
> Â Â Â Â Â Â Â Â pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
> Â }
>
> @@ -1339,8 +1338,7 @@ static struct pci_driver via_sd_driver = {
>
> Â static int __init via_sd_drv_init(void)
> Â {
> - Â Â Â pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver "
> - Â Â Â Â Â Â Â "(C) 2008 VIA Technologies, Inc.\n");
> + Â Â Â pr_info("VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.\n");
>
> Â Â Â Â return pci_register_driver(&via_sd_driver);
> Â }
> diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
> index e8f6e65..1908a25 100644
> --- a/drivers/mmc/host/vub300.c
> +++ b/drivers/mmc/host/vub300.c
> @@ -35,6 +35,9 @@
> Â * Â Â Â Â Â Â bits and driver data fields reflect that limit by using
> Â * Â Â Â Â Â Â u8, u16, u32
> Â */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> Â #include <linux/kernel.h>
> Â #include <linux/errno.h>
> Â #include <linux/init.h>
> @@ -1257,9 +1260,8 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â } else {
> Â Â Â Â Â Â Â Â Â Â Â Â dev_err(&vub300->udev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "not enough memory for xfer buffer to send"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " INTERRUPT_PSEUDOCODE for %s %s\n", fw->data,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â vub300->vub_name);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "not enough memory for xfer buffer to send INTERRUPT_PSEUDOCODE for %s %s\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â fw->data, vub300->vub_name);
> Â Â Â Â Â Â Â Â Â Â Â Â strncpy(vub300->vub_name,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "SDIO interrupt pseudocode download failed",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â sizeof(vub300->vub_name));
> @@ -1304,9 +1306,8 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â } else {
> Â Â Â Â Â Â Â Â Â Â Â Â dev_err(&vub300->udev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "not enough memory for xfer buffer to send"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " TRANSFER_PSEUDOCODE for %s %s\n", fw->data,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â vub300->vub_name);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "not enough memory for xfer buffer to send TRANSFER_PSEUDOCODE for %s %s\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â fw->data, vub300->vub_name);
> Â Â Â Â Â Â Â Â Â Â Â Â strncpy(vub300->vub_name,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "SDIO transfer pseudocode download failed",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â sizeof(vub300->vub_name));
> @@ -2002,11 +2003,11 @@ static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0x00, 0x00, buf, buf_array_size, HZ);
> Â Â Â Â if (retval != 8) {
> - Â Â Â Â Â Â Â dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
> - Â Â Â Â Â Â Â Â Â Â Â " %dkHz failed with retval=%d\n", kHzClock, retval);
> + Â Â Â Â Â Â Â dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED %dkHz failed with retval=%d\n",
> + Â Â Â Â Â Â Â Â Â Â Â kHzClock, retval);
> Â Â Â Â } else {
> - Â Â Â Â Â Â Â dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED"
> - Â Â Â Â Â Â Â Â Â Â Â " %dkHz\n", kHzClock);
> + Â Â Â Â Â Â Â dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED %dkHz\n",
> + Â Â Â Â Â Â Â Â Â Â Â kHzClock);
> Â Â Â Â }
> Â }
>
> @@ -2251,8 +2252,7 @@ static int vub300_probe(struct usb_interface *interface,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â endpoint->bEndpointAddress;
> Â Â Â Â Â Â Â Â Â Â Â Â } else {
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_warn(&vub300->udev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "ignoring"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " unexpected bulk_in endpoint");
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "ignoring unexpected bulk_in endpoint\n");
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â } else if (usb_endpoint_is_bulk_out(endpoint)) {
> Â Â Â Â Â Â Â Â Â Â Â Â if (!vub300->cmnd_out_ep) {
> @@ -2263,20 +2263,18 @@ static int vub300_probe(struct usb_interface *interface,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â endpoint->bEndpointAddress;
> Â Â Â Â Â Â Â Â Â Â Â Â } else {
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â dev_warn(&vub300->udev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "ignoring"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " unexpected bulk_out endpoint");
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "ignoring unexpected bulk_out endpoint\n");
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â } else {
> Â Â Â Â Â Â Â Â Â Â Â Â dev_warn(&vub300->udev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "vub300 ignoring EndPoint(%d) %02X", i,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â endpoint->bEndpointAddress);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "vub300 ignoring EndPoint(%d) %02X\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â i, endpoint->bEndpointAddress);
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> Â Â Â Â if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
> Â Â Â Â Â Â vub300->data_inp_ep && vub300->data_out_ep) {
> Â Â Â Â Â Â Â Â dev_info(&vub300->udev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â "vub300 %s packets"
> - Â Â Â Â Â Â Â Â Â Â Â Â " using EndPoints %02X %02X %02X %02X\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â "vub300 %s packets using EndPoints %02X %02X %02X %02X\n",
> Â Â Â Â Â Â Â Â Â Â Â Â vub300->large_usb_packets ? "LARGE" : "SMALL",
> Â Â Â Â Â Â Â Â Â Â Â Â vub300->cmnd_out_ep, vub300->cmnd_res_ep,
> Â Â Â Â Â Â Â Â Â Â Â Â vub300->data_out_ep, vub300->data_inp_ep);
> @@ -2341,13 +2339,11 @@ static int vub300_probe(struct usb_interface *interface,
> Â Â Â Â add_timer(&vub300->inactivity_timer);
> Â Â Â Â if (vub300->card_present)
> Â Â Â Â Â Â Â Â dev_info(&vub300->udev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â "USB vub300 remote SDIO host controller[%d]"
> - Â Â Â Â Â Â Â Â Â Â Â Â "connected with SD/SDIO card inserted\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â "USB vub300 remote SDIO host controller[%d]connected with SD/SDIO card inserted\n",
> Â Â Â Â Â Â Â Â Â Â Â Â interface_to_InterfaceNumber(interface));
> Â Â Â Â else
> Â Â Â Â Â Â Â Â dev_info(&vub300->udev->dev,
> - Â Â Â Â Â Â Â Â Â Â Â Â "USB vub300 remote SDIO host controller[%d]"
> - Â Â Â Â Â Â Â Â Â Â Â Â "connected with no SD/SDIO card inserted\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â "USB vub300 remote SDIO host controller[%d]connected with no SD/SDIO card inserted\n",
> Â Â Â Â Â Â Â Â Â Â Â Â interface_to_InterfaceNumber(interface));
> Â Â Â Â mmc_add_host(mmc);
> Â Â Â Â return 0;
> @@ -2381,8 +2377,8 @@ static void vub300_disconnect(struct usb_interface *interface)
> Â Â Â Â Â Â Â Â Â Â Â Â vub300->interface = NULL;
> Â Â Â Â Â Â Â Â Â Â Â Â kref_put(&vub300->kref, vub300_delete);
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_remove_host(mmc);
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("USB vub300 remote SDIO host controller[%d]"
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â " now disconnected", ifnum);
> + Â Â Â Â Â Â Â Â Â Â Â pr_info("USB remote SDIO host controller[%d] now disconnected\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ifnum);
> Â Â Â Â Â Â Â Â Â Â Â Â return;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -2448,29 +2444,29 @@ static int __init vub300_init(void)
> Â { Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* NOT irq */
> Â Â Â Â int result;
>
> - Â Â Â pr_info("VUB300 Driver rom wait states = %02X irqpoll timeout = %04X",
> + Â Â Â pr_info("Driver rom wait states = %02X irqpoll timeout = %04X\n",
> Â Â Â Â Â Â Â Â firmware_rom_wait_states, 0x0FFFF & firmware_irqpoll_timeout);
> Â Â Â Â cmndworkqueue = create_singlethread_workqueue("kvub300c");
> Â Â Â Â if (!cmndworkqueue) {
> - Â Â Â Â Â Â Â pr_err("not enough memory for the REQUEST workqueue");
> + Â Â Â Â Â Â Â pr_err("not enough memory for the REQUEST workqueue\n");
> Â Â Â Â Â Â Â Â result = -ENOMEM;
> Â Â Â Â Â Â Â Â goto out1;
> Â Â Â Â }
> Â Â Â Â pollworkqueue = create_singlethread_workqueue("kvub300p");
> Â Â Â Â if (!pollworkqueue) {
> - Â Â Â Â Â Â Â pr_err("not enough memory for the IRQPOLL workqueue");
> + Â Â Â Â Â Â Â pr_err("not enough memory for the IRQPOLL workqueue\n");
> Â Â Â Â Â Â Â Â result = -ENOMEM;
> Â Â Â Â Â Â Â Â goto out2;
> Â Â Â Â }
> Â Â Â Â deadworkqueue = create_singlethread_workqueue("kvub300d");
> Â Â Â Â if (!deadworkqueue) {
> - Â Â Â Â Â Â Â pr_err("not enough memory for the EXPIRED workqueue");
> + Â Â Â Â Â Â Â pr_err("not enough memory for the EXPIRED workqueue\n");
> Â Â Â Â Â Â Â Â result = -ENOMEM;
> Â Â Â Â Â Â Â Â goto out3;
> Â Â Â Â }
> Â Â Â Â result = usb_register(&vub300_driver);
> Â Â Â Â if (result) {
> - Â Â Â Â Â Â Â pr_err("usb_register failed. Error number %d", result);
> + Â Â Â Â Â Â Â pr_err("usb_register failed. Error number %d\n", result);
> Â Â Â Â Â Â Â Â goto out4;
> Â Â Â Â }
> Â Â Â Â return 0;
> diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
> index deaed8c..7536b50 100644
> --- a/drivers/mmc/host/wbsd.c
> +++ b/drivers/mmc/host/wbsd.c
> @@ -721,9 +721,8 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
> Â Â Â Â Â Â Â Â * Any leftover data?
> Â Â Â Â Â Â Â Â */
> Â Â Â Â Â Â Â Â if (count) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Incomplete DMA transfer. "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "%d bytes left.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), count);
> + Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Incomplete DMA transfer. %d bytes left.\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), count);
>
> Â Â Â Â Â Â Â Â Â Â Â Â if (!data->error)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â data->error = -EIO;
> --
> 1.7.6.405.gc1be0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 3/4] mmc: Logging neatening
2011-11-16 1:48 ` NamJae Jeon
@ 2011-11-16 1:50 ` Joe Perches
2011-11-16 1:55 ` NamJae Jeon
2011-11-16 18:38 ` Mike Frysinger
1 sibling, 1 reply; 19+ messages in thread
From: Joe Perches @ 2011-11-16 1:50 UTC (permalink / raw)
To: NamJae Jeon
Cc: Nicolas Ferre, Manuel Lauss, Cliff Cai, Nicolas Pitre,
Chris Ball, Sascha Sommer, Alex Dubov, Bruce Chang, Harald Welte,
Tony Olech, Pierre Ossman, linux-mmc, linux-kernel,
linux-arm-kernel, uclinux-dist-devel, linux-omap, linux-usb
On Wed, 2011-11-16 at 10:48 +0900, NamJae Jeon wrote:
[123K of untrimmed reply]
If you wrote something, I didn't find it.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 3/4] mmc: Logging neatening
2011-11-16 1:50 ` Joe Perches
@ 2011-11-16 1:55 ` NamJae Jeon
2011-11-16 2:00 ` Joe Perches
0 siblings, 1 reply; 19+ messages in thread
From: NamJae Jeon @ 2011-11-16 1:55 UTC (permalink / raw)
To: Joe Perches
Cc: Nicolas Ferre, Manuel Lauss, Cliff Cai, Nicolas Pitre,
Chris Ball, Sascha Sommer, Alex Dubov, Bruce Chang, Harald Welte,
Tony Olech, Pierre Ossman, linux-mmc, linux-kernel,
linux-arm-kernel, uclinux-dist-devel, linux-omap, linux-usb
2011/11/16 Joe Perches <joe@perches.com>:
> On Wed, 2011-11-16 at 10:48 +0900, NamJae Jeon wrote:
>
> [123K of untrimmed reply]
>
> If you wrote something, I didn't find it.
>
> - dev_info(&pdev->dev, "DW MMC controller at irq %d, "
> - "%d bit host data width, "
> - "%u deep fifo\n",
> + dev_info(&pdev->dev,
> + "DW MMC controller at irq %d, %d bit host data width, %u deep fifo\n",
> irq, width, fifo_size);
I think that tab is needed this "DW MMC controller at irq ...." ?
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 3/4] mmc: Logging neatening
2011-11-16 1:55 ` NamJae Jeon
@ 2011-11-16 2:00 ` Joe Perches
2011-11-16 2:08 ` NamJae Jeon
0 siblings, 1 reply; 19+ messages in thread
From: Joe Perches @ 2011-11-16 2:00 UTC (permalink / raw)
To: NamJae Jeon
Cc: Nicolas Ferre, Manuel Lauss, Cliff Cai, Nicolas Pitre,
Chris Ball, Sascha Sommer, Alex Dubov, Bruce Chang, Harald Welte,
Tony Olech, Pierre Ossman, linux-mmc, linux-kernel,
linux-arm-kernel, uclinux-dist-devel, linux-omap, linux-usb
On Wed, 2011-11-16 at 10:55 +0900, NamJae Jeon wrote:
> 2011/11/16 Joe Perches <joe@perches.com>:
> > On Wed, 2011-11-16 at 10:48 +0900, NamJae Jeon wrote:
> >
> > [123K of untrimmed reply]
> >
> > If you wrote something, I didn't find it.
> >
>
> > - dev_info(&pdev->dev, "DW MMC controller at irq %d, "
> > - "%d bit host data width, "
> > - "%u deep fifo\n",
> > + dev_info(&pdev->dev,
> > + "DW MMC controller at irq %d, %d bit host data width, %u deep fifo\n",
> > irq, width, fifo_size);
>
> I think that tab is needed this "DW MMC controller at irq ...." ?
Argument alignment isn't always the right thing.
Very long formats should not necessarily be aligned
at the open parenthesis. It helps to determine
when the format string or the dmesg output line length
is too long.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 3/4] mmc: Logging neatening
2011-11-16 2:00 ` Joe Perches
@ 2011-11-16 2:08 ` NamJae Jeon
0 siblings, 0 replies; 19+ messages in thread
From: NamJae Jeon @ 2011-11-16 2:08 UTC (permalink / raw)
To: Joe Perches
Cc: Nicolas Ferre, Manuel Lauss, Cliff Cai, Nicolas Pitre,
Chris Ball, Sascha Sommer, Alex Dubov, Bruce Chang, Harald Welte,
Tony Olech, Pierre Ossman, linux-mmc, linux-kernel,
linux-arm-kernel, uclinux-dist-devel, linux-omap, linux-usb
2011/11/16 Joe Perches <joe@perches.com>:
> On Wed, 2011-11-16 at 10:55 +0900, NamJae Jeon wrote:
>> 2011/11/16 Joe Perches <joe@perches.com>:
>> > On Wed, 2011-11-16 at 10:48 +0900, NamJae Jeon wrote:
>> >
>> > [123K of untrimmed reply]
>> >
>> > If you wrote something, I didn't find it.
>> >
>>
>> > - dev_info(&pdev->dev, "DW MMC controller at irq %d, "
>> > - "%d bit host data width, "
>> > - "%u deep fifo\n",
>> > + dev_info(&pdev->dev,
>> > + "DW MMC controller at irq %d, %d bit host data width, %u deep fifo\n",
>> > irq, width, fifo_size);
>>
>> I think that tab is needed this "DW MMC controller at irq ...." ?
>
> Argument alignment isn't always the right thing.
>
> Very long formats should not necessarily be aligned
> at the open parenthesis. It helps to determine
> when the format string or the dmesg output line length
> is too long.
Okay~ I understand clearly.
Thanks.
> Coalesce formats.
> Align arguments.
> Add pr_fmt, remove prefixes from format strings.
> Neaten DBG uses, rearrange argument order.
>
> Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
>
>
>
>
>
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 3/4] mmc: Logging neatening
2011-11-16 1:48 ` NamJae Jeon
2011-11-16 1:50 ` Joe Perches
@ 2011-11-16 18:38 ` Mike Frysinger
1 sibling, 0 replies; 19+ messages in thread
From: Mike Frysinger @ 2011-11-16 18:38 UTC (permalink / raw)
To: uclinux-dist-devel
Cc: NamJae Jeon, Joe Perches, Cliff Cai, linux-omap, Alex Dubov,
Nicolas Pitre, linux-mmc, linux-usb, Nicolas Ferre, Harald Welte,
Bruce Chang, Sascha Sommer, linux-arm-kernel, Tony Olech,
Manuel Lauss, Pierre Ossman, Chris Ball, linux-kernel
[-- Attachment #1: Type: Text/Plain, Size: 792 bytes --]
On Tuesday 15 November 2011 20:48:05 NamJae Jeon wrote:
> 2011/11/16 Joe Perches <joe@perches.com>:
> > mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci
> > interrupt */
> >
> > - dev_info(&pdev->dev, "DW MMC controller at irq %d, "
> > - "%d bit host data width, "
> > - "%u deep fifo\n",
> > + dev_info(&pdev->dev,
> > + "DW MMC controller at irq %d, %d bit host data width, %u deep
> > fifo\n", irq, width, fifo_size);
>
> I think that tab is needed this "DW MMC controller at irq ...." ?
looks to me like this was the only part you replied to. could you please snip
the unrelated context in the future ? no reason to include ~1700 lines of
context when you only replying to like ~10 lines.
-mike
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH 4/4] mmc: Add mmc_host_<level> logging
2011-11-15 23:32 [PATCH 0/4] mmc: logging neatening and mmc_host_<level> Joe Perches
` (2 preceding siblings ...)
2011-11-15 23:32 ` [PATCH 3/4] mmc: Logging neatening Joe Perches
@ 2011-11-15 23:32 ` Joe Perches
2011-11-16 0:52 ` NamJae Jeon
` (2 more replies)
3 siblings, 3 replies; 19+ messages in thread
From: Joe Perches @ 2011-11-15 23:32 UTC (permalink / raw)
To: Nicolas Ferre, David Brown, Daniel Walker, Bryan Huntsman,
Nicolas Pitre, Chris Ball, Guennadi Liakhovetski, Ian Molton,
Bruce Chang, Harald Welte, Pierre Ossman
Cc: linux-mmc, linux-kernel, linux-arm-kernel, linux-arm-msm, linux-omap
Centralize the pr_<level> uses of mmc_hostname into specific
mmc_host_<level> calls to allow a flexible presentation style
and shorten the code a bit.
Add mmc_host_<level> macros.
Convert the logging calls from:
pr_<level>("%s: ...", mmc_hostname(foo)
to:
mmc_host_<level>(foo, ...)
Add a couple of missing newlines.
Convert bare printks to pr_cont where appropriate.
Spelling/typo fix of initialiazed to initialized.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/mmc/card/mmc_test.c | 66 +++++++++++---------------
drivers/mmc/core/bus.c | 27 +++++------
drivers/mmc/core/core.c | 101 ++++++++++++++++++---------------------
drivers/mmc/core/host.c | 13 ++---
drivers/mmc/core/mmc.c | 67 ++++++++++---------------
drivers/mmc/core/mmc_ops.c | 11 ++--
drivers/mmc/core/sd.c | 62 ++++++++---------------
drivers/mmc/core/sdio.c | 10 ++--
drivers/mmc/core/sdio_cis.c | 9 ++--
drivers/mmc/core/sdio_irq.c | 7 +--
drivers/mmc/host/at91_mci.c | 9 ++--
drivers/mmc/host/dw_mmc.c | 2 +-
drivers/mmc/host/msm_sdcc.c | 101 ++++++++++++++++++---------------------
drivers/mmc/host/mvsdio.c | 35 ++++++--------
drivers/mmc/host/omap_hsmmc.c | 7 +--
drivers/mmc/host/pxamci.c | 4 +-
drivers/mmc/host/sdhci.c | 81 +++++++++++++------------------
drivers/mmc/host/tmio_mmc.c | 4 +-
drivers/mmc/host/tmio_mmc_pio.c | 4 +-
drivers/mmc/host/via-sdmmc.c | 21 ++++-----
drivers/mmc/host/wbsd.c | 27 +++++-----
include/linux/mmc/host.h | 11 ++++
22 files changed, 298 insertions(+), 381 deletions(-)
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index f079555..5a263c6 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -253,8 +253,7 @@ static int mmc_test_wait_busy(struct mmc_test_card *test)
if (!busy && mmc_test_busy(&cmd)) {
busy = 1;
if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
- pr_info("%s: Warning: Host did not wait for busy state to end\n",
- mmc_hostname(test->card->host));
+ mmc_host_info(test->card->host, "Warning: Host did not wait for busy state to end\n");
}
} while (mmc_test_busy(&cmd));
@@ -554,11 +553,11 @@ static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes,
rate = mmc_test_rate(bytes, &ts);
iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
- pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
- mmc_hostname(test->card->host), sectors, sectors >> 1,
- (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
- (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
- iops / 100, iops % 100);
+ mmc_host_info(test->card->host, "Transfer of %u sectors (%u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
+ sectors, sectors >> 1,
+ (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
+ (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
+ iops / 100, iops % 100);
mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops);
}
@@ -579,12 +578,12 @@ static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes,
rate = mmc_test_rate(tot, &ts);
iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
- pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS, sg_len %d)\n",
- mmc_hostname(test->card->host), count, sectors, count,
- sectors >> 1, (sectors & 1 ? ".5" : ""),
- (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
- rate / 1000, rate / 1024, iops / 100, iops % 100,
- test->area.sg_len);
+ mmc_host_info(test->card->host, "Transfer of %u x %u sectors (%u x %u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS, sg_len %d)\n",
+ count, sectors, count,
+ sectors >> 1, (sectors & 1 ? ".5" : ""),
+ (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
+ rate / 1000, rate / 1024, iops / 100, iops % 100,
+ test->area.sg_len);
mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops);
}
@@ -1407,8 +1406,7 @@ static int mmc_test_multi_read_high(struct mmc_test_card *test)
static int mmc_test_no_highmem(struct mmc_test_card *test)
{
- pr_info("%s: Highmem not configured - test skipped\n",
- mmc_hostname(test->card->host));
+ mmc_host_info(test->card->host, "Highmem not configured - test skipped\n");
return 0;
}
@@ -1434,8 +1432,7 @@ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz,
t->max_seg_sz, &t->sg_len, min_sg_len);
}
if (err)
- pr_info("%s: Failed to map sg list\n",
- mmc_hostname(test->card->host));
+ mmc_host_info(test->card->host, "Failed to map sg list\n");
return err;
}
@@ -2689,8 +2686,8 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
{
int i, ret;
- pr_info("%s: Starting tests of card %s...\n",
- mmc_hostname(test->card->host), mmc_card_id(test->card));
+ mmc_host_info(test->card->host, "Starting tests of card %s...\n",
+ mmc_card_id(test->card));
mmc_claim_host(test->card->host);
@@ -2700,16 +2697,14 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
if (testcase && ((i + 1) != testcase))
continue;
- pr_info("%s: Test case %d. %s...\n",
- mmc_hostname(test->card->host), i + 1,
- mmc_test_cases[i].name);
+ mmc_host_info(test->card->host, "Test case %d. %s...\n",
+ i + 1, mmc_test_cases[i].name);
if (mmc_test_cases[i].prepare) {
ret = mmc_test_cases[i].prepare(test);
if (ret) {
- pr_info("%s: Result: Prepare stage failed! (%d)\n",
- mmc_hostname(test->card->host),
- ret);
+ mmc_host_info(test->card->host, "Result: Prepare stage failed! (%d)\n",
+ ret);
continue;
}
}
@@ -2736,24 +2731,20 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
ret = mmc_test_cases[i].run(test);
switch (ret) {
case RESULT_OK:
- pr_info("%s: Result: OK\n",
- mmc_hostname(test->card->host));
+ mmc_host_info(test->card->host, "Result: OK\n");
break;
case RESULT_FAIL:
- pr_info("%s: Result: FAILED\n",
- mmc_hostname(test->card->host));
+ mmc_host_info(test->card->host, "Result: FAILED\n");
break;
case RESULT_UNSUP_HOST:
- pr_info("%s: Result: UNSUPPORTED (by host)\n",
- mmc_hostname(test->card->host));
+ mmc_host_info(test->card->host, "Result: UNSUPPORTED (by host)\n");
break;
case RESULT_UNSUP_CARD:
- pr_info("%s: Result: UNSUPPORTED (by card)\n",
- mmc_hostname(test->card->host));
+ mmc_host_info(test->card->host, "Result: UNSUPPORTED (by card)\n");
break;
default:
- pr_info("%s: Result: ERROR (%d)\n",
- mmc_hostname(test->card->host), ret);
+ mmc_host_info(test->card->host, "Result: ERROR (%d)\n",
+ ret);
}
/* Save the result */
@@ -2763,8 +2754,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
if (mmc_test_cases[i].cleanup) {
ret = mmc_test_cases[i].cleanup(test);
if (ret) {
- pr_info("%s: Warning: Cleanup stage failed! (%d)\n",
- mmc_hostname(test->card->host),
+ mmc_host_info(test->card->host, "Warning: Cleanup stage failed! (%d)\n",
ret);
}
}
@@ -2772,7 +2762,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
mmc_release_host(test->card->host);
- pr_info("%s: Tests completed\n", mmc_hostname(test->card->host));
+ mmc_host_info(test->card->host, "Tests completed\n");
}
static void mmc_test_free_result(struct mmc_card *card)
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 2e1f028..e976d85 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -297,18 +297,16 @@ int mmc_add_card(struct mmc_card *card)
}
if (mmc_host_is_spi(card->host)) {
- pr_info("%s: new %s%s%s card on SPI\n",
- mmc_hostname(card->host),
- mmc_card_highspeed(card) ? "high speed " : "",
- mmc_card_ddr_mode(card) ? "DDR " : "",
- type);
+ mmc_host_info(card->host, "new %s%s%s card on SPI\n",
+ mmc_card_highspeed(card) ? "high speed " : "",
+ mmc_card_ddr_mode(card) ? "DDR " : "",
+ type);
} else {
- pr_info("%s: new %s%s%s card at address %04x\n",
- mmc_hostname(card->host),
- mmc_sd_card_uhs(card) ? "ultra high speed " :
- mmc_card_highspeed(card) ? "high speed " : "",
- mmc_card_ddr_mode(card) ? "DDR " : "",
- type, card->rca);
+ mmc_host_info(card->host, "new %s%s%s card at address %04x\n",
+ mmc_sd_card_uhs(card) ? "ultra high speed " :
+ mmc_card_highspeed(card) ? "high speed " : "",
+ mmc_card_ddr_mode(card) ? "DDR " : "",
+ type, card->rca);
}
#ifdef CONFIG_DEBUG_FS
@@ -336,11 +334,10 @@ void mmc_remove_card(struct mmc_card *card)
if (mmc_card_present(card)) {
if (mmc_host_is_spi(card->host)) {
- pr_info("%s: SPI card removed\n",
- mmc_hostname(card->host));
+ mmc_host_info(card->host, "SPI card removed\n");
} else {
- pr_info("%s: card %04x removed\n",
- mmc_hostname(card->host), card->rca);
+ mmc_host_info(card->host, "card %04x removed\n",
+ card->rca);
}
device_del(&card->dev);
}
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 39e1311..39779d7 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -155,23 +155,23 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
led_trigger_event(host->led, LED_OFF);
- pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), cmd->opcode, err,
- cmd->resp[0], cmd->resp[1],
- cmd->resp[2], cmd->resp[3]);
+ mmc_host_debug(host, "req done (CMD%u): %d: %08x %08x %08x %08x\n",
+ cmd->opcode, err,
+ cmd->resp[0], cmd->resp[1],
+ cmd->resp[2], cmd->resp[3]);
if (mrq->data) {
- pr_debug("%s: %d bytes transferred: %d\n",
- mmc_hostname(host),
- mrq->data->bytes_xfered, mrq->data->error);
+ mmc_host_debug(host, " %d bytes transferred: %d\n",
+ mrq->data->bytes_xfered,
+ mrq->data->error);
}
if (mrq->stop) {
- pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), mrq->stop->opcode,
- mrq->stop->error,
- mrq->stop->resp[0], mrq->stop->resp[1],
- mrq->stop->resp[2], mrq->stop->resp[3]);
+ mmc_host_debug(host, " (CMD%u): %d: %08x %08x %08x %08x\n",
+ mrq->stop->opcode,
+ mrq->stop->error,
+ mrq->stop->resp[0], mrq->stop->resp[1],
+ mrq->stop->resp[2], mrq->stop->resp[3]);
}
if (mrq->done)
@@ -191,22 +191,21 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
struct scatterlist *sg;
#endif
- pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
- mmc_hostname(host), mrq->cmd->opcode,
- mrq->cmd->arg, mrq->cmd->flags);
+ mmc_host_debug(host, "starting CMD%u arg %08x flags %08x\n",
+ mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags);
if (mrq->data) {
- pr_debug("%s: blksz %d blocks %d flags %08x tsac %d ms nsac %d\n",
- mmc_hostname(host), mrq->data->blksz,
- mrq->data->blocks, mrq->data->flags,
- mrq->data->timeout_ns / 1000000,
- mrq->data->timeout_clks);
+ mmc_host_debug(host, " blksz %d blocks %d flags %08x tsac %d ms nsac %d\n",
+ mrq->data->blksz,
+ mrq->data->blocks, mrq->data->flags,
+ mrq->data->timeout_ns / 1000000,
+ mrq->data->timeout_clks);
}
if (mrq->stop) {
- pr_debug("%s: CMD%u arg %08x flags %08x\n",
- mmc_hostname(host), mrq->stop->opcode,
- mrq->stop->arg, mrq->stop->flags);
+ mmc_host_debug(host, " CMD%u arg %08x flags %08x\n",
+ mrq->stop->opcode,
+ mrq->stop->arg, mrq->stop->flags);
}
WARN_ON(!host->claimed);
@@ -264,8 +263,8 @@ static void mmc_wait_for_req_done(struct mmc_host *host,
if (!cmd->error || !cmd->retries)
break;
- pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
- mmc_hostname(host), cmd->opcode, cmd->error);
+ mmc_host_debug(host, "req failed (CMD%u): %d, retrying...\n",
+ cmd->opcode, cmd->error);
cmd->retries--;
cmd->error = 0;
host->ops->request(host, mrq);
@@ -396,14 +395,14 @@ int mmc_interrupt_hpi(struct mmc_card *card)
BUG_ON(!card);
if (!card->ext_csd.hpi_en) {
- pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
+ mmc_host_info(card->host, "HPI enable bit unset\n");
return 1;
}
mmc_claim_host(card->host);
err = mmc_send_status(card, &status);
if (err) {
- pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
+ mmc_host_err(card->host, "Get card status fail\n");
goto out;
}
@@ -422,15 +421,15 @@ int mmc_interrupt_hpi(struct mmc_card *card)
*/
err = mmc_send_hpi_cmd(card, &status);
if (err)
- pr_debug("%s: abort HPI (%d error)\n",
- mmc_hostname(card->host), err);
+ mmc_host_debug(card->host, "abort HPI (%d error)\n",
+ err);
err = mmc_send_status(card, &status);
if (err)
break;
} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
} else
- pr_debug("%s: Left prg-state\n", mmc_hostname(card->host));
+ mmc_host_debug(card->host, "Left prg-state\n");
out:
mmc_release_host(card->host);
@@ -620,8 +619,7 @@ int mmc_host_enable(struct mmc_host *host)
host->en_dis_recurs = 0;
if (err) {
- pr_debug("%s: enable error %d\n",
- mmc_hostname(host), err);
+ mmc_host_debug(host, "enable error %d\n", err);
return err;
}
}
@@ -640,8 +638,7 @@ static int mmc_host_do_disable(struct mmc_host *host, int lazy)
host->en_dis_recurs = 0;
if (err < 0) {
- pr_debug("%s: disable error %d\n",
- mmc_hostname(host), err);
+ mmc_host_debug(host, "disable error %d\n", err);
return err;
}
if (err > 0) {
@@ -844,10 +841,10 @@ static inline void mmc_set_ios(struct mmc_host *host)
{
struct mmc_ios *ios = &host->ios;
- pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
- mmc_hostname(host), ios->clock, ios->bus_mode,
- ios->power_mode, ios->chip_select, ios->vdd,
- ios->bus_width, ios->timing);
+ mmc_host_debug(host, "clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
+ ios->clock, ios->bus_mode,
+ ios->power_mode, ios->chip_select, ios->vdd,
+ ios->bus_width, ios->timing);
if (ios->clock > 0)
mmc_set_ungated(host);
@@ -1164,8 +1161,7 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
mmc_set_ios(host);
mmc_host_clk_release(host);
} else {
- pr_warn("%s: host doesn't support card's voltages\n",
- mmc_hostname(host));
+ mmc_host_warn(host, "host doesn't support card's voltages\n");
ocr = 0;
}
@@ -1893,8 +1889,8 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card)
} else if (max_discard < card->erase_size) {
max_discard = 0;
}
- pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n",
- mmc_hostname(host), max_discard, host->max_discard_to);
+ mmc_host_debug(host, "calculated max. discard sectors %u for timeout %u ms\n",
+ max_discard, host->max_discard_to);
return max_discard;
}
EXPORT_SYMBOL(mmc_calc_max_discard);
@@ -2006,8 +2002,8 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
host->f_init = freq;
#ifdef CONFIG_MMC_DEBUG
- pr_info("%s: %s: trying to init card at %u Hz\n",
- mmc_hostname(host), __func__, host->f_init);
+ mmc_host_info(host, "%s: trying to init card at %u Hz\n",
+ __func__, host->f_init);
#endif
mmc_power_up(host);
@@ -2142,7 +2138,7 @@ int mmc_power_save_host(struct mmc_host *host)
int ret = 0;
#ifdef CONFIG_MMC_DEBUG
- pr_info("%s: %s: powering down\n", mmc_hostname(host), __func__);
+ mmc_host_info(host, "%s: powering down\n", __func__);
#endif
mmc_bus_get(host);
@@ -2168,7 +2164,7 @@ int mmc_power_restore_host(struct mmc_host *host)
int ret;
#ifdef CONFIG_MMC_DEBUG
- pr_info("%s: %s: powering up\n", mmc_hostname(host), __func__);
+ mmc_host_info(host, "%s: powering up\n", __func__);
#endif
mmc_bus_get(host);
@@ -2244,8 +2240,7 @@ int mmc_flush_cache(struct mmc_card *card)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_FLUSH_CACHE, 1, 0);
if (err)
- pr_err("%s: cache flush error %d\n",
- mmc_hostname(card->host), err);
+ mmc_host_err(card->host, "cache flush error %d\n", err);
}
return err;
@@ -2274,10 +2269,8 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_CACHE_CTRL, enable, 0);
if (err)
- pr_err("%s: cache %s error %d\n",
- mmc_hostname(card->host),
- enable ? "on" : "off",
- err);
+ mmc_host_err(card->host, "cache %s error %d\n",
+ enable ? "on" : "off", err);
else
card->ext_csd.cache_ctrl = enable;
}
@@ -2375,8 +2368,8 @@ int mmc_resume_host(struct mmc_host *host)
BUG_ON(!host->bus_ops->resume);
err = host->bus_ops->resume(host);
if (err) {
- pr_warn("%s: error %d during resume (card was removed?)\n",
- mmc_hostname(host), err);
+ mmc_host_warn(host, "error %d during resume (card was removed?)\n",
+ err);
err = 0;
}
}
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 7f963c0..40d177f 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -75,8 +75,7 @@ static ssize_t clkgate_delay_store(struct device *dev,
host->clkgate_delay = value;
spin_unlock_irqrestore(&host->clk_lock, flags);
- pr_info("%s: clock gate delay set to %lu ms\n",
- mmc_hostname(host), value);
+ mmc_host_info(host, "clock gate delay set to %lu ms\n", value);
return count;
}
@@ -94,8 +93,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
unsigned long flags;
if (!freq) {
- pr_debug("%s: frequency set to 0 in disable function, this means the clock is already disabled\n",
- mmc_hostname(host));
+ mmc_host_debug(host, "frequency set to 0 in disable function, this means the clock is already disabled\n");
return;
}
/*
@@ -126,7 +124,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
/* This will set host->ios.clock to 0 */
mmc_gate_clock(host);
spin_lock_irqsave(&host->clk_lock, flags);
- pr_debug("%s: gated MCI clock\n", mmc_hostname(host));
+ mmc_host_debug(host, "gated MCI clock\n");
}
spin_unlock_irqrestore(&host->clk_lock, flags);
mutex_unlock(&host->clk_gate_mutex);
@@ -163,7 +161,7 @@ void mmc_host_clk_hold(struct mmc_host *host)
spin_unlock_irqrestore(&host->clk_lock, flags);
mmc_ungate_clock(host);
spin_lock_irqsave(&host->clk_lock, flags);
- pr_debug("%s: ungated MCI clock\n", mmc_hostname(host));
+ mmc_host_debug(host, "ungated MCI clock\n");
}
host->clk_requests++;
spin_unlock_irqrestore(&host->clk_lock, flags);
@@ -277,8 +275,7 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host)
host->clkgate_delay_attr.attr.name = "clkgate_delay";
host->clkgate_delay_attr.attr.mode = S_IRUGO | S_IWUSR;
if (device_create_file(&host->class_dev, &host->clkgate_delay_attr))
- pr_err("%s: Failed to create clkgate_delay sysfs entry\n",
- mmc_hostname(host));
+ mmc_host_err(host, "Failed to create clkgate_delay sysfs entry\n");
}
#else
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index f6db788..c7efe5a 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -102,8 +102,8 @@ static int mmc_decode_cid(struct mmc_card *card)
break;
default:
- pr_err("%s: card has unknown MMCA version %d\n",
- mmc_hostname(card->host), card->csd.mmca_vsn);
+ mmc_host_err(card->host, "card has unknown MMCA version %d\n",
+ card->csd.mmca_vsn);
return -EINVAL;
}
@@ -136,8 +136,8 @@ static int mmc_decode_csd(struct mmc_card *card)
*/
csd->structure = UNSTUFF_BITS(resp, 126, 2);
if (csd->structure == 0) {
- pr_err("%s: unrecognised CSD structure version %d\n",
- mmc_hostname(card->host), csd->structure);
+ mmc_host_err(card->host, "unrecognised CSD structure version %d\n",
+ csd->structure);
return -EINVAL;
}
@@ -196,8 +196,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
*/
ext_csd = kmalloc(512, GFP_KERNEL);
if (!ext_csd) {
- pr_err("%s: could not allocate a buffer to receive the ext_csd\n",
- mmc_hostname(card->host));
+ mmc_host_err(card->host, "could not allocate a buffer to receive the ext_csd\n");
return -ENOMEM;
}
@@ -218,11 +217,9 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
* stored in their CSD.
*/
if (card->csd.capacity == (4096 * 512)) {
- pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
- mmc_hostname(card->host));
+ mmc_host_err(card->host, "unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n");
} else {
- pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "unable to read EXT_CSD, performance might suffer\n");
err = 0;
}
} else
@@ -249,9 +246,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
if (card->ext_csd.raw_ext_csd_structure > 2) {
- pr_err("%s: unrecognised EXT_CSD structure version %d\n",
- mmc_hostname(card->host),
- card->ext_csd.raw_ext_csd_structure);
+ mmc_host_err(card->host, "unrecognised EXT_CSD structure version %d\n",
+ card->ext_csd.raw_ext_csd_structure);
err = -EINVAL;
goto out;
}
@@ -259,8 +255,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
if (card->ext_csd.rev > 6) {
- pr_err("%s: unrecognised EXT_CSD revision %d\n",
- mmc_hostname(card->host), card->ext_csd.rev);
+ mmc_host_err(card->host, "unrecognised EXT_CSD revision %d\n",
+ card->ext_csd.rev);
err = -EINVAL;
goto out;
}
@@ -305,8 +301,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
break;
default:
/* MMC v4 spec says this cannot happen */
- pr_warn("%s: card is mmc v4 but doesn't support any high-speed modes\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "card is mmc v4 but doesn't support any high-speed modes\n");
}
card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT];
@@ -659,8 +654,7 @@ static int mmc_select_powerclass(struct mmc_card *card,
index = EXT_CSD_PWR_CL_200_360;
break;
default:
- pr_warn("%s: Voltage range not supported for power class\n",
- mmc_hostname(host));
+ mmc_host_warn(host, "Voltage range not supported for power class\n");
return -EINVAL;
}
@@ -899,8 +893,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
goto free_card;
if (err) {
- pr_warn("%s: switch to highspeed failed\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "switch to highspeed failed\n");
err = 0;
} else {
mmc_card_set_highspeed(card);
@@ -917,8 +910,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if (err && err != -EBADMSG)
goto free_card;
if (err) {
- pr_warn("%s: Enabling HPI failed\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "Enabling HPI failed\n");
err = 0;
} else
card->ext_csd.hpi_en = 1;
@@ -982,9 +974,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
- pr_err("%s: power class selection to bus width %d failed\n",
- mmc_hostname(card->host),
- 1 << bus_width);
+ mmc_host_err(card->host, "power class selection to bus width %d failed\n",
+ 1 << bus_width);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
@@ -1012,9 +1003,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
- pr_err("%s: power class selection to bus width %d ddr %d failed\n",
- mmc_hostname(card->host),
- 1 << bus_width, ddr);
+ mmc_host_err(card->host, "power class selection to bus width %d ddr %d failed\n",
+ 1 << bus_width, ddr);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
@@ -1022,9 +1012,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
card->ext_csd.generic_cmd6_time);
}
if (err) {
- pr_warn("%s: switch to bus width %d ddr %d failed\n",
- mmc_hostname(card->host),
- 1 << bus_width, ddr);
+ mmc_host_warn(card->host, "switch to bus width %d ddr %d failed\n",
+ 1 << bus_width, ddr);
goto free_card;
} else if (ddr) {
/*
@@ -1187,8 +1176,8 @@ static int mmc_sleep(struct mmc_host *host)
if (card && card->ext_csd.rev >= 3) {
err = mmc_card_sleepawake(host, 1);
if (err < 0)
- pr_debug("%s: Error %d while putting card into sleep",
- mmc_hostname(host), err);
+ mmc_host_debug(host, "Error %d while putting card into sleep\n",
+ err);
}
return err;
@@ -1202,8 +1191,8 @@ static int mmc_awake(struct mmc_host *host)
if (card && card->ext_csd.rev >= 3) {
err = mmc_card_sleepawake(host, 0);
if (err < 0)
- pr_debug("%s: Error %d while awaking sleeping card",
- mmc_hostname(host), err);
+ mmc_host_debug(host, "Error %d while awaking sleeping card\n",
+ err);
}
return err;
@@ -1277,8 +1266,7 @@ int mmc_attach_mmc(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ mmc_host_warn(host, "card claims to support voltages below the defined range. These will be ignored.\n");
ocr &= ~0x7F;
}
@@ -1315,8 +1303,7 @@ remove_card:
err:
mmc_detach_bus(host);
- pr_err("%s: error %d whilst initialising MMC card\n",
- mmc_hostname(host), err);
+ mmc_host_err(host, "error %d whilst initialising MMC card\n", err);
return err;
}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 7c7388c..c1e0b9c 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -415,8 +415,8 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
return -EBADMSG;
} else {
if (status & 0xFDFFA000)
- pr_warn("%s: unexpected status %#x after switch\n",
- mmc_hostname(card->host), status);
+ mmc_host_warn(card->host, "unexpected status %#x after switch\n",
+ status);
if (status & R1_SWITCH_ERROR)
return -EBADMSG;
}
@@ -477,8 +477,7 @@ mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
else if (len == 4)
test_buf = testdata_4bit;
else {
- pr_err("%s: Invalid bus_width %d\n",
- mmc_hostname(host), len);
+ mmc_host_err(host, "Invalid bus_width %d\n", len);
kfree(data_buf);
return -EINVAL;
}
@@ -569,8 +568,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- pr_warn("%s: error %d interrupting operation. HPI command response %#x\n",
- mmc_hostname(card->host), err, cmd.resp[0]);
+ mmc_host_warn(card->host, "error %d interrupting operation. HPI command response %#x\n",
+ err, cmd.resp[0]);
return err;
}
if (status)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 1492b7b..2b0fba9 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -166,8 +166,8 @@ static int mmc_decode_csd(struct mmc_card *card)
csd->erase_size = 1;
break;
default:
- pr_err("%s: unrecognised CSD structure version %d\n",
- mmc_hostname(card->host), csd_struct);
+ mmc_host_err(card->host, "unrecognised CSD structure version %d\n",
+ csd_struct);
return -EINVAL;
}
@@ -190,8 +190,8 @@ static int mmc_decode_scr(struct mmc_card *card)
scr_struct = UNSTUFF_BITS(resp, 60, 4);
if (scr_struct != 0) {
- pr_err("%s: unrecognised SCR structure version %d\n",
- mmc_hostname(card->host), scr_struct);
+ mmc_host_err(card->host, "unrecognised SCR structure version %d\n",
+ scr_struct);
return -EINVAL;
}
@@ -221,8 +221,7 @@ static int mmc_read_ssr(struct mmc_card *card)
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
- pr_warn("%s: card lacks mandatory SD Status function\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "card lacks mandatory SD Status function\n");
return 0;
}
@@ -232,8 +231,7 @@ static int mmc_read_ssr(struct mmc_card *card)
err = mmc_app_sd_status(card, ssr);
if (err) {
- pr_warn("%s: problem reading SD Status register\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "problem reading SD Status register\n");
err = 0;
goto out;
}
@@ -256,8 +254,7 @@ static int mmc_read_ssr(struct mmc_card *card)
card->ssr.erase_offset = eo * 1000;
}
} else {
- pr_warn("%s: SD Status: Invalid Allocation Unit size\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "SD Status: Invalid Allocation Unit size\n");
}
out:
kfree(ssr);
@@ -276,8 +273,7 @@ static int mmc_read_switch(struct mmc_card *card)
return 0;
if (!(card->csd.cmdclass & CCC_SWITCH)) {
- pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "card lacks mandatory switch function, performance might suffer\n");
return 0;
}
@@ -285,8 +281,7 @@ static int mmc_read_switch(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for switch capabilities\n",
- mmc_hostname(card->host));
+ mmc_host_err(card->host, "could not allocate a buffer for switch capabilities\n");
return -ENOMEM;
}
@@ -300,8 +295,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warn("%s: problem reading Bus Speed modes\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "problem reading Bus Speed modes\n");
err = 0;
goto out;
@@ -323,8 +317,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warn("%s: problem reading Driver Strength\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "problem reading Driver Strength\n");
err = 0;
goto out;
@@ -342,8 +335,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warn("%s: problem reading Current Limit\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "problem reading Current Limit\n");
err = 0;
goto out;
@@ -382,8 +374,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for switch capabilities\n",
- mmc_hostname(card->host));
+ mmc_host_err(card->host, "could not allocate a buffer for switch capabilities\n");
return -ENOMEM;
}
@@ -392,8 +383,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
goto out;
if ((status[16] & 0xF) != 1) {
- pr_warn("%s: problem switching card into high-speed mode!\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "problem switching card into high-speed mode!\n");
err = 0;
} else {
err = 1;
@@ -457,8 +447,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
return err;
if ((status[15] & 0xF) != drive_strength) {
- pr_warn("%s: problem setting drive strength!\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "problem setting drive strength!\n");
return 0;
}
@@ -536,8 +525,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
return err;
if ((status[16] & 0xF) != card->sd_bus_speed)
- pr_warn("%s: problem setting bus speed mode!\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "problem setting bus speed mode!\n");
else {
mmc_set_timing(card->host, timing);
mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr);
@@ -598,8 +586,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
return err;
if (((status[15] >> 4) & 0x0F) != current_limit)
- pr_warn("%s: problem setting current limit!\n",
- mmc_hostname(card->host));
+ mmc_host_warn(card->host, "problem setting current limit!\n");
return 0;
}
@@ -620,8 +607,7 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for switch capabilities\n",
- mmc_hostname(card->host));
+ mmc_host_err(card->host, "could not allocate a buffer for switch capabilities\n");
return -ENOMEM;
}
@@ -850,8 +836,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
ro = host->ops->get_ro(host);
if (ro < 0) {
- pr_warn("%s: host does not support reading read-only switch. assuming write-enable.\n",
- mmc_hostname(host));
+ mmc_host_warn(host, "host does not support reading read-only switch. assuming write-enable.\n");
} else if (ro > 0) {
mmc_card_set_readonly(card);
}
@@ -1162,15 +1147,13 @@ int mmc_attach_sd(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ mmc_host_warn(host, "card claims to support voltages below the defined range. These will be ignored.\n");
ocr &= ~0x7F;
}
if ((ocr & MMC_VDD_165_195) &&
!(host->ocr_avail_sd & MMC_VDD_165_195)) {
- pr_warn("%s: SD card claims to support the incompletely defined 'low voltage range'. This will be ignored.\n",
- mmc_hostname(host));
+ mmc_host_warn(host, "SD card claims to support the incompletely defined 'low voltage range'. This will be ignored.\n");
ocr &= ~MMC_VDD_165_195;
}
@@ -1207,8 +1190,7 @@ remove_card:
err:
mmc_detach_bus(host);
- pr_err("%s: error %d whilst initialising SD card\n",
- mmc_hostname(host), err);
+ mmc_host_err(host, "error %d whilst initialising SD card\n", err);
return err;
}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index e994a89..7bae59b 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -112,8 +112,8 @@ static int sdio_read_cccr(struct mmc_card *card)
cccr_vsn = data & 0x0f;
if (cccr_vsn > SDIO_CCCR_REV_3_00) {
- pr_err("%s: unrecognised CCCR structure version %d\n",
- mmc_hostname(card->host), cccr_vsn);
+ mmc_host_err(card->host, "unrecognised CCCR structure version %d\n",
+ cccr_vsn);
return -EINVAL;
}
@@ -777,8 +777,7 @@ int mmc_attach_sdio(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ mmc_host_warn(host, "card claims to support voltages below the defined range. These will be ignored.\n");
ocr &= ~0x7F;
}
@@ -873,8 +872,7 @@ remove:
err:
mmc_detach_bus(host);
- pr_err("%s: error %d whilst initialising SDIO card\n",
- mmc_hostname(host), err);
+ mmc_host_err(host, "error %d whilst initialising SDIO card\n", err);
return err;
}
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index 6536fce..e50fecb 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -132,8 +132,8 @@ static int cis_tpl_parse(struct mmc_card *card, struct sdio_func *func,
ret = -EINVAL;
}
if (ret && ret != -EILSEQ && ret != -ENOENT) {
- pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n",
- mmc_hostname(card->host), tpl_descr, code, size);
+ mmc_host_err(card->host, "bad %s tuple 0x%02x (%u bytes)\n",
+ tpl_descr, code, size);
}
} else {
/* unknown tuple */
@@ -313,9 +313,8 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
if (ret == -ENOENT) {
/* warn about unknown tuples */
- pr_warn("%s: queuing unknown CIS tuple 0x%02x (%u bytes)\n",
- mmc_hostname(card->host),
- tpl_code, tpl_link);
+ mmc_host_warn(card->host, "queuing unknown CIS tuple 0x%02x (%u bytes)\n",
+ tpl_code, tpl_link);
}
/* keep on analyzing tuples */
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 533d0e5..3aa13bf 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -97,8 +97,8 @@ static int sdio_irq_thread(void *_host)
period = (host->caps & MMC_CAP_SDIO_IRQ) ?
MAX_SCHEDULE_TIMEOUT : idle_period;
- pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n",
- mmc_hostname(host), period);
+ mmc_host_debug(host, "IRQ thread started (poll period = %lu jiffies)\n",
+ period);
do {
/*
@@ -157,8 +157,7 @@ static int sdio_irq_thread(void *_host)
if (host->caps & MMC_CAP_SDIO_IRQ)
host->ops->enable_sdio_irq(host, 0);
- pr_debug("%s: IRQ thread exiting with code %d\n",
- mmc_hostname(host), ret);
+ mmc_host_debug(host, "IRQ thread exiting with code %d\n", ret);
return ret;
}
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index d63f453..4add419 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -881,8 +881,8 @@ static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
*/
if (present != host->present) {
host->present = present;
- pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
- present ? "insert" : "remove");
+ mmc_host_debug(host->mmc, "card %s\n",
+ present ? "insert" : "remove");
if (!present) {
pr_debug("****** Resetting SD-card bus width ******\n");
at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
@@ -910,8 +910,9 @@ static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
struct at91mci_host *host = mmc_priv(mmc);
- pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc),
- host->board->slot_b ? 'B':'A', enable ? "enable" : "disable");
+ mmc_host_debug(host->mmc, "sdio_irq %c : %s\n",
+ host->board->slot_b ? 'B' : 'A',
+ enable ? "enable" : "disable");
at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR,
host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 5d34c01..b4efd3c 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1712,7 +1712,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
if (IS_ERR(host->vmmc)) {
- pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
+ mmc_host_info(mmc, "no vmmc regulator found\n");
host->vmmc = NULL;
} else
regulator_enable(host->vmmc);
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 80d8eb1..e0b49ec 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -141,16 +141,15 @@ static void msmsdcc_reset_and_restore(struct msmsdcc_host *host)
/* Reset the controller */
ret = clk_reset(host->clk, CLK_RESET_ASSERT);
if (ret)
- pr_err("%s: Clock assert failed at %u Hz with err %d\n",
- mmc_hostname(host->mmc), host->clk_rate, ret);
+ mmc_host_err(host->mmc, "Clock assert failed at %u Hz with err %d\n",
+ host->clk_rate, ret);
ret = clk_reset(host->clk, CLK_RESET_DEASSERT);
if (ret)
- pr_err("%s: Clock deassert failed at %u Hz with err %d\n",
- mmc_hostname(host->mmc), host->clk_rate, ret);
+ mmc_host_err(host->mmc, "Clock deassert failed at %u Hz with err %d\n",
+ host->clk_rate, ret);
- pr_info("%s: Controller has been re-initialiazed\n",
- mmc_hostname(host->mmc));
+ mmc_host_info(host->mmc, "Controller has been re-initialized\n");
/* Restore the contoller state */
writel(host->pwr, host->base + MMCIPOWER);
@@ -158,8 +157,8 @@ static void msmsdcc_reset_and_restore(struct msmsdcc_host *host)
writel(mci_mask0, host->base + MMCIMASK0);
ret = clk_set_rate(host->clk, host->clk_rate);
if (ret)
- pr_err("%s: Failed to set clk rate %u Hz (%d)\n",
- mmc_hostname(host->mmc), host->clk_rate, ret);
+ mmc_host_err(host->mmc, "Failed to set clk rate %u Hz (%d)\n",
+ host->clk_rate, ret);
}
static void
@@ -251,11 +250,11 @@ msmsdcc_dma_complete_tlet(unsigned long data)
} else {
/* Error or flush */
if (host->dma.result & DMOV_RSLT_ERROR)
- pr_err("%s: DMA error (0x%.8x)\n",
- mmc_hostname(host->mmc), host->dma.result);
+ mmc_host_err(host->mmc, "DMA error (0x%.8x)\n",
+ host->dma.result);
if (host->dma.result & DMOV_RSLT_FLUSH)
- pr_err("%s: DMA channel flushed (0x%.8x)\n",
- mmc_hostname(host->mmc), host->dma.result);
+ mmc_host_err(host->mmc, "DMA channel flushed (0x%.8x)\n",
+ host->dma.result);
pr_err("Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n",
err.flush[0], err.flush[1], err.flush[2],
@@ -389,8 +388,7 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data)
n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg,
host->dma.num_ents, host->dma.dir);
if (n == 0) {
- pr_err("%s: Unable to map in all sg elements\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Unable to map in all sg elements\n");
host->dma.sg = NULL;
host->dma.num_ents = 0;
return -ENOMEM;
@@ -475,8 +473,7 @@ msmsdcc_start_command_deferred(struct msmsdcc_host *host,
*c |= MCI_CSPM_MCIABORT;
if (host->curr.cmd != NULL) {
- pr_err("%s: Overlapping command requests\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Overlapping command requests\n");
}
host->curr.cmd = cmd;
}
@@ -573,24 +570,23 @@ msmsdcc_data_err(struct msmsdcc_host *host, struct mmc_data *data,
unsigned int status)
{
if (status & MCI_DATACRCFAIL) {
- pr_err("%s: Data CRC error\n", mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Data CRC error\n");
pr_err("%s: opcode 0x%.8x\n", __func__,
data->mrq->cmd->opcode);
pr_err("%s: blksz %d, blocks %d\n", __func__,
data->blksz, data->blocks);
data->error = -EILSEQ;
} else if (status & MCI_DATATIMEOUT) {
- pr_err("%s: Data timeout\n", mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Data timeout\n");
data->error = -ETIMEDOUT;
} else if (status & MCI_RXOVERRUN) {
- pr_err("%s: RX overrun\n", mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "RX overrun\n");
data->error = -EIO;
} else if (status & MCI_TXUNDERRUN) {
- pr_err("%s: TX underrun\n", mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "TX underrun\n");
data->error = -EIO;
} else {
- pr_err("%s: Unknown error (0x%.8x)\n",
- mmc_hostname(host->mmc), status);
+ mmc_host_err(host->mmc, "Unknown error (0x%.8x)\n", status);
data->error = -EIO;
}
}
@@ -751,7 +747,7 @@ static void msmsdcc_do_cmdirq(struct msmsdcc_host *host, uint32_t status)
cmd->error = -ETIMEDOUT;
} else if (status & MCI_CMDCRCFAIL &&
cmd->flags & MMC_RSP_CRC) {
- pr_err("%s: Command CRC error\n", mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Command CRC error\n");
cmd->error = -EILSEQ;
}
@@ -960,10 +956,9 @@ static void msmsdcc_setup_gpio(struct msmsdcc_host *host, bool enable)
rc = gpio_request(curr->gpio[i].no,
curr->gpio[i].name);
if (rc) {
- pr_err("%s: gpio_request(%d, %s) failed %d\n",
- mmc_hostname(host->mmc),
- curr->gpio[i].no,
- curr->gpio[i].name, rc);
+ mmc_host_err(host->mmc, "gpio_request(%d, %s) failed %d\n",
+ curr->gpio[i].no,
+ curr->gpio[i].name, rc);
goto free_gpios;
}
} else {
@@ -996,8 +991,8 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (ios->clock != host->clk_rate) {
rc = clk_set_rate(host->clk, ios->clock);
if (rc < 0)
- pr_err("%s: Error setting clock rate (%d)\n",
- mmc_hostname(host->mmc), rc);
+ mmc_host_err(host->mmc, "Error setting clock rate (%d)\n",
+ rc);
else
host->clk_rate = ios->clock;
}
@@ -1093,8 +1088,8 @@ msmsdcc_check_status(unsigned long data)
status = host->plat->status(mmc_dev(host->mmc));
host->eject = !status;
if (status ^ host->oldstat) {
- pr_info("%s: Slot status change detected (%d -> %d)\n",
- mmc_hostname(host->mmc), host->oldstat, status);
+ mmc_host_info(host->mmc, "Slot status change detected (%d -> %d)\n",
+ host->oldstat, status);
if (status)
mmc_detect_change(host->mmc, (5 * HZ) / 2);
else
@@ -1123,8 +1118,7 @@ msmsdcc_status_notify_cb(int card_present, void *dev_id)
{
struct msmsdcc_host *host = dev_id;
- pr_debug("%s: card_present %d\n", mmc_hostname(host->mmc),
- card_present);
+ mmc_host_debug(host->mmc, "card_present %d\n", card_present);
msmsdcc_check_status((unsigned long) host);
}
@@ -1321,15 +1315,14 @@ msmsdcc_probe(struct platform_device *pdev)
DRIVER_NAME " (slot)",
host);
if (ret) {
- pr_err("%s: Unable to get slot IRQ %d (%d)\n",
- mmc_hostname(mmc), host->stat_irq, ret);
+ mmc_host_err(mmc, "Unable to get slot IRQ %d (%d)\n",
+ host->stat_irq, ret);
goto clk_disable;
}
} else if (plat->register_status_notify) {
plat->register_status_notify(msmsdcc_status_notify_cb, host);
} else if (!plat->status)
- pr_err("%s: No card detect facilities available\n",
- mmc_hostname(mmc));
+ mmc_host_err(mmc, "No card detect facilities available\n");
else {
init_timer(&host->timer);
host->timer.data = (unsigned long)host;
@@ -1356,28 +1349,26 @@ msmsdcc_probe(struct platform_device *pdev)
mmc_set_drvdata(pdev, mmc);
mmc_add_host(mmc);
- pr_info("%s: Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
- mmc_hostname(mmc), (unsigned long long)memres->start,
- (unsigned int) cmd_irqres->start,
- (unsigned int) host->stat_irq, host->dma.channel);
- pr_info("%s: 4 bit data mode %s\n", mmc_hostname(mmc),
- (mmc->caps & MMC_CAP_4_BIT_DATA ? "enabled" : "disabled"));
- pr_info("%s: MMC clock %u -> %u Hz, PCLK %u Hz\n",
- mmc_hostname(mmc), msmsdcc_fmin, msmsdcc_fmax, host->pclk_rate);
- pr_info("%s: Slot eject status = %d\n", mmc_hostname(mmc), host->eject);
- pr_info("%s: Power save feature enable = %d\n",
- mmc_hostname(mmc), msmsdcc_pwrsave);
+ mmc_host_info(mmc, "Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
+ (unsigned long long)memres->start,
+ (unsigned int) cmd_irqres->start,
+ (unsigned int) host->stat_irq, host->dma.channel);
+ mmc_host_info(mmc, "4 bit data mode %s\n",
+ mmc->caps & MMC_CAP_4_BIT_DATA ? "enabled" : "disabled");
+ mmc_host_info(mmc, "MMC clock %u -> %u Hz, PCLK %u Hz\n",
+ msmsdcc_fmin, msmsdcc_fmax, host->pclk_rate);
+ mmc_host_info(mmc, "Slot eject status = %d\n", host->eject);
+ mmc_host_info(mmc, "Power save feature enable = %d\n", msmsdcc_pwrsave);
if (host->dma.channel != -1) {
- pr_info("%s: DM non-cached buffer at %p, dma_addr 0x%.8x\n",
- mmc_hostname(mmc), host->dma.nc, host->dma.nc_busaddr);
- pr_info("%s: DM cmd busaddr 0x%.8x, cmdptr busaddr 0x%.8x\n",
- mmc_hostname(mmc), host->dma.cmd_busaddr,
- host->dma.cmdptr_busaddr);
+ mmc_host_info(mmc, "DM non-cached buffer at %p, dma_addr 0x%.8x\n",
+ host->dma.nc, host->dma.nc_busaddr);
+ mmc_host_info(mmc, "DM cmd busaddr 0x%.8x, cmdptr busaddr 0x%.8x\n",
+ host->dma.cmd_busaddr, host->dma.cmdptr_busaddr);
} else
- pr_info("%s: PIO transfer enabled\n", mmc_hostname(mmc));
+ mmc_host_info(mmc, "PIO transfer enabled\n");
if (host->timer.function)
- pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc));
+ mmc_host_info(mmc, "Polling status mode enabled\n");
return 0;
cmd_irq_free:
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 93012a0..7928e2e 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -117,9 +117,8 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
if (!nodma)
- pr_debug("%s: fallback to PIO for data at 0x%p size %d\n",
- mmc_hostname(host->mmc),
- host->pio_ptr, host->pio_size);
+ mmc_host_debug(host->mmc, "fallback to PIO for data at 0x%p size %d\n",
+ host->pio_ptr, host->pio_size);
return 1;
} else {
dma_addr_t phys_addr;
@@ -470,8 +469,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
if (mrq->data)
err_status = mvsd_finish_data(host, mrq->data, err_status);
if (err_status) {
- pr_err("%s: unhandled error status %#04x\n",
- mmc_hostname(host->mmc), err_status);
+ mmc_host_err(host->mmc, "unhandled error status %#04x\n",
+ err_status);
cmd->error = -ENOMSG;
}
@@ -488,9 +487,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
if (irq_handled)
return IRQ_HANDLED;
- pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
- mmc_hostname(host->mmc), intr_status,
- host->intr_en, host->pio_size);
+ mmc_host_err(host->mmc, "unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
+ intr_status, host->intr_en, host->pio_size);
return IRQ_NONE;
}
@@ -504,13 +502,11 @@ static void mvsd_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
mrq = host->mrq;
if (mrq) {
- pr_err("%s: Timeout waiting for hardware interrupt\n",
- mmc_hostname(host->mmc));
- pr_err("%s: hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
- mmc_hostname(host->mmc),
- mvsd_read(MVSD_HW_STATE),
- mvsd_read(MVSD_NOR_INTR_STATUS),
- mvsd_read(MVSD_NOR_INTR_EN));
+ mmc_host_err(host->mmc, "Timeout waiting for hardware interrupt\n");
+ mmc_host_err(host->mmc, "hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
+ mvsd_read(MVSD_HW_STATE),
+ mvsd_read(MVSD_NOR_INTR_STATUS),
+ mvsd_read(MVSD_NOR_INTR_EN));
host->mrq = NULL;
@@ -801,13 +797,12 @@ static int __init mvsd_probe(struct platform_device *pdev)
if (ret)
goto out;
- pr_notice("%s: %s driver initialized, ",
- mmc_hostname(mmc), DRIVER_NAME);
+ mmc_host_notice(mmc, "%s driver initialized, ", DRIVER_NAME);
if (host->gpio_card_detect)
- printk("using GPIO %d for card detection\n",
- host->gpio_card_detect);
+ pr_cont("using GPIO %d for card detection\n",
+ host->gpio_card_detect);
else
- printk("lacking card detect (fall back to polling)\n");
+ pr_cont("lacking card detect (fall back to polling)\n");
return 0;
out:
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index dd5159b..35bddef 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1264,15 +1264,12 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
host->reqs_blocked = 0;
if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
if (host->protect_card) {
- pr_info("%s: cover is closed, card is now accessible\n",
- mmc_hostname(host->mmc));
+ mmc_host_info(host->mmc, "cover is closed, card is now accessible\n");
host->protect_card = 0;
}
} else {
if (!host->protect_card) {
- pr_info("%s: cover is open, "
- "card is now inaccessible\n",
- mmc_hostname(host->mmc));
+ mmc_host_info(host->mmc, "cover is open, card is now inaccessible\n");
host->protect_card = 1;
}
}
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index fc4356e..f8c6df2 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -558,8 +558,8 @@ static void pxamci_dma_irq(int dma, void *devid)
if (dcsr & DCSR_ENDINTR) {
writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
} else {
- pr_err("%s: DMA error on channel %d (DCSR=%#x)\n",
- mmc_hostname(host->mmc), dma, dcsr);
+ mmc_host_err(host->mmc, "DMA error on channel %d (DCSR=%#x)\n",
+ dma, dcsr);
host->data->error = -EIO;
pxamci_data_done(host, 0);
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d31c31d..3fcf79d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -202,8 +202,8 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
/* hw clears the bit when it's done */
while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
if (timeout == 0) {
- pr_err("%s: Reset 0x%x never completed.\n",
- mmc_hostname(host->mmc), (int)mask);
+ mmc_host_err(host->mmc, "Reset 0x%x never completed\n",
+ (int)mask);
sdhci_dumpregs(host);
return;
}
@@ -679,8 +679,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
}
if (count >= 0xF) {
- pr_warn("%s: Too large timeout requested for CMD%d!\n",
- mmc_hostname(host->mmc), cmd->opcode);
+ mmc_host_warn(host->mmc, "Too large timeout requested for CMD%d!\n",
+ cmd->opcode);
count = 0xE;
}
@@ -972,8 +972,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
- pr_err("%s: Controller never released inhibit bit(s)\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Controller never released inhibit bit(s)\n");
sdhci_dumpregs(host);
cmd->error = -EIO;
tasklet_schedule(&host->finish_tasklet);
@@ -994,8 +993,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
sdhci_set_transfer_mode(host, cmd);
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
- pr_err("%s: Unsupported response type!\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Unsupported response type!\n");
cmd->error = -EINVAL;
tasklet_schedule(&host->finish_tasklet);
return;
@@ -1154,8 +1152,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- pr_err("%s: Internal clock never stabilised\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Internal clock never stabilised\n");
sdhci_dumpregs(host);
return;
}
@@ -1912,10 +1909,8 @@ static void sdhci_tasklet_card(unsigned long param)
/* Check host->mrq first in case we are runtime suspended */
if (host->mrq &&
!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
- pr_err("%s: Card removed during transfer!\n",
- mmc_hostname(host->mmc));
- pr_err("%s: Resetting controller.\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Card removed during transfer!\n");
+ mmc_host_err(host->mmc, "Resetting controller.\n");
sdhci_reset(host, SDHCI_RESET_CMD);
sdhci_reset(host, SDHCI_RESET_DATA);
@@ -2003,8 +1998,7 @@ static void sdhci_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
if (host->mrq) {
- pr_err("%s: Timeout waiting for hardware interrupt\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Timeout waiting for hardware interrupt\n");
sdhci_dumpregs(host);
if (host->data) {
@@ -2049,8 +2043,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
BUG_ON(intmask == 0);
if (!host->cmd) {
- pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress\n",
- mmc_hostname(host->mmc), (unsigned)intmask);
+ mmc_host_err(host->mmc, "Got command interrupt 0x%08x even though no command operation was in progress\n",
+ (unsigned)intmask);
sdhci_dumpregs(host);
return;
}
@@ -2147,8 +2141,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
}
}
- pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress\n",
- mmc_hostname(host->mmc), (unsigned)intmask);
+ mmc_host_err(host->mmc, "Got data interrupt 0x%08x even though no data operation was in progress\n",
+ (unsigned)intmask);
sdhci_dumpregs(host);
return;
@@ -2163,7 +2157,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
!= MMC_BUS_TEST_R)
host->data->error = -EILSEQ;
else if (intmask & SDHCI_INT_ADMA_ERROR) {
- pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "ADMA error\n");
sdhci_show_adma_error(host);
host->data->error = -EIO;
}
@@ -2226,8 +2220,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
if (host->runtime_suspended) {
spin_unlock(&host->lock);
- pr_warn("%s: got irq while runtime suspended\n",
- mmc_hostname(host->mmc));
+ mmc_host_warn(host->mmc, "got irq while runtime suspended\n");
return IRQ_HANDLED;
}
@@ -2283,8 +2276,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
intmask &= ~SDHCI_INT_ERROR;
if (intmask & SDHCI_INT_BUS_POWER) {
- pr_err("%s: Card is consuming too much power!\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Card is consuming too much power!\n");
sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
}
@@ -2296,8 +2288,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
intmask &= ~SDHCI_INT_CARD_INT;
if (intmask) {
- pr_err("%s: Unexpected interrupt 0x%08x.\n",
- mmc_hostname(host->mmc), intmask);
+ mmc_host_err(host->mmc, "Unexpected interrupt 0x%08x\n",
+ intmask);
sdhci_dumpregs(host);
sdhci_writel(host, intmask, SDHCI_INT_STATUS);
@@ -2537,8 +2529,8 @@ int sdhci_add_host(struct sdhci_host *host)
host->version = (host->version & SDHCI_SPEC_VER_MASK)
>> SDHCI_SPEC_VER_SHIFT;
if (host->version > SDHCI_SPEC_300) {
- pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
- mmc_hostname(mmc), host->version);
+ mmc_host_err(mmc, "Unknown controller version (%d). You may experience problems.\n",
+ host->version);
}
caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
@@ -2573,8 +2565,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
- pr_warn("%s: No suitable DMA available. Falling back to PIO.\n",
- mmc_hostname(mmc));
+ mmc_host_warn(mmc, "No suitable DMA available. Falling back to PIO.\n");
host->flags &=
~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
}
@@ -2592,8 +2583,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (!host->adma_desc || !host->align_buffer) {
kfree(host->adma_desc);
kfree(host->align_buffer);
- pr_warn("%s: Unable to allocate ADMA buffers. Falling back to standard DMA.\n",
- mmc_hostname(mmc));
+ mmc_host_warn(mmc, "Unable to allocate ADMA buffers. Falling back to standard DMA.\n");
host->flags &= ~SDHCI_USE_ADMA;
}
}
@@ -2619,8 +2609,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->max_clk == 0 || host->quirks &
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
if (!host->ops->get_max_clock) {
- pr_err("%s: Hardware doesn't specify base clock frequency\n",
- mmc_hostname(mmc));
+ mmc_host_err(mmc, "Hardware doesn't specify base clock frequency\n");
return -ENODEV;
}
host->max_clk = host->ops->get_max_clock(host);
@@ -2665,8 +2654,7 @@ int sdhci_add_host(struct sdhci_host *host)
host->timeout_clk = host->ops->get_timeout_clock(host);
} else if (!(host->quirks &
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
- pr_err("%s: Hardware doesn't specify timeout clock frequency\n",
- mmc_hostname(mmc));
+ mmc_host_err(mmc, "Hardware doesn't specify timeout clock frequency\n");
return -ENODEV;
}
}
@@ -2833,8 +2821,7 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
if (mmc->ocr_avail == 0) {
- pr_err("%s: Hardware doesn't report any support voltages\n",
- mmc_hostname(mmc));
+ mmc_host_err(mmc, "Hardware doesn't report any support voltages\n");
return -ENODEV;
}
@@ -2881,8 +2868,7 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
SDHCI_MAX_BLOCK_SHIFT;
if (mmc->max_blk_size >= 3) {
- pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
- mmc_hostname(mmc));
+ mmc_host_warn(mmc, "Invalid maximum block size, assuming 512 bytes\n");
mmc->max_blk_size = 0;
}
}
@@ -2920,7 +2906,7 @@ int sdhci_add_host(struct sdhci_host *host)
host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
if (IS_ERR(host->vmmc)) {
- pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
+ mmc_host_info(mmc, "no vmmc regulator found\n");
host->vmmc = NULL;
} else {
regulator_enable(host->vmmc);
@@ -2949,10 +2935,10 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_add_host(mmc);
- pr_info("%s: SDHCI controller on %s [%s] using %s\n",
- mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
- (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
- (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
+ mmc_host_info(mmc, "SDHCI controller on %s [%s] using %s\n",
+ host->hw_name, dev_name(mmc_dev(mmc)),
+ (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
sdhci_enable_card_detection(host);
@@ -2982,8 +2968,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
host->flags |= SDHCI_DEVICE_DEAD;
if (host->mrq) {
- pr_err("%s: Controller removed during transfer!\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Controller removed during transfer!\n");
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index a4ea102..cfd45cb 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -93,8 +93,8 @@ static int __devinit tmio_mmc_probe(struct platform_device *pdev)
if (ret)
goto host_remove;
- pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
- (unsigned long)host->ctl, irq);
+ mmc_host_info(host->mmc, "at 0x%08lx irq %d\n",
+ (unsigned long)host->ctl, irq);
return 0;
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index d85a60c..ad680d7 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -681,8 +681,8 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
- pr_err("%s: %d byte block unsupported in 4 bit mode\n",
- mmc_hostname(host->mmc), data->blksz);
+ mmc_host_err(host->mmc, "%d byte block unsupported in 4 bit mode\n",
+ data->blksz);
return -EINVAL;
}
}
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index dc479b0..a673161 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -585,7 +585,7 @@ static void via_sdc_send_command(struct via_crdr_mmc_host *host,
cmdctrl |= VIA_CRDR_SDCTRL_RSP_R3;
break;
default:
- pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "cmd->flag is not valid\n");
break;
}
@@ -840,8 +840,8 @@ static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
BUG_ON(intmask == 0);
if (!host->cmd) {
- pr_err("%s: Got command interrupt 0x%x even though no command operation was in progress\n",
- mmc_hostname(host->mmc), intmask);
+ mmc_host_err(host->mmc, "Got command interrupt 0x%x even though no command operation was in progress\n",
+ intmask);
return;
}
@@ -918,8 +918,8 @@ static irqreturn_t via_sdc_isr(int irq, void *dev_id)
sd_status &= ~(VIA_CRDR_SDSTS_CMD_MASK | VIA_CRDR_SDSTS_DATA_MASK);
if (sd_status) {
- pr_err("%s: Unexpected interrupt 0x%x\n",
- mmc_hostname(sdhost->mmc), sd_status);
+ mmc_host_err(sdhost->mmc, "Unexpected interrupt 0x%x\n",
+ sd_status);
writew(sd_status, addrbase + VIA_CRDR_SDSTATUS);
}
@@ -942,9 +942,8 @@ static void via_sdc_timeout(unsigned long ulongdata)
spin_lock_irqsave(&sdhost->lock, flags);
if (sdhost->mrq) {
- pr_err("%s: Timeout waiting for hardware interrupt.cmd:0x%x\n",
- mmc_hostname(sdhost->mmc),
- sdhost->mrq->cmd->opcode);
+ mmc_host_err(sdhost->mmc, "Timeout waiting for hardware interrupt.cmd:0x%x\n",
+ sdhost->mrq->cmd->opcode);
if (sdhost->data) {
writel(VIA_CRDR_DMACTRL_SFTRST,
@@ -1006,8 +1005,7 @@ static void via_sdc_card_detect(struct work_struct *work)
status = readw(addrbase + VIA_CRDR_SDSTATUS);
if (!(status & VIA_CRDR_SDSTS_SLOTG)) {
if (host->mrq) {
- pr_err("%s: Card removed during transfer!\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Card removed during transfer!\n");
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
}
@@ -1192,8 +1190,7 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
mmiowb();
if (sdhost->mrq) {
- pr_err("%s: Controller removed during transfer\n",
- mmc_hostname(sdhost->mmc));
+ mmc_host_err(sdhost->mmc, "Controller removed during transfer\n");
/* make sure all DMA is stopped */
writel(VIA_CRDR_DMACTRL_SFTRST,
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 7536b50..ae474a4 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -194,7 +194,7 @@ static void wbsd_reset(struct wbsd_host *host)
{
u8 setup;
- pr_err("%s: Resetting chip\n", mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Resetting chip\n");
/*
* Soft reset of chip (SD/MMC part).
@@ -721,8 +721,8 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
* Any leftover data?
*/
if (count) {
- pr_err("%s: Incomplete DMA transfer. %d bytes left.\n",
- mmc_hostname(host->mmc), count);
+ mmc_host_err(host->mmc, "Incomplete DMA transfer. %d bytes left.\n",
+ count);
if (!data->error)
data->error = -EIO;
@@ -802,8 +802,8 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
default:
#ifdef CONFIG_MMC_DEBUG
- pr_warn("%s: Data command %d is not supported by this controller\n",
- mmc_hostname(host->mmc), cmd->opcode);
+ mmc_host_warn(host->mmc, "Data command %d is not supported by this controller\n",
+ cmd->opcode);
#endif
cmd->error = -EINVAL;
@@ -1027,8 +1027,7 @@ static void wbsd_tasklet_card(unsigned long param)
host->flags &= ~WBSD_FCARD_PRESENT;
if (host->mrq) {
- pr_err("%s: Card removed during transfer!\n",
- mmc_hostname(host->mmc));
+ mmc_host_err(host->mmc, "Card removed during transfer!\n");
wbsd_reset(host);
host->mrq->cmd->error = -ENOMEDIUM;
@@ -1713,17 +1712,17 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
mmc_add_host(mmc);
- pr_info("%s: W83L51xD", mmc_hostname(mmc));
+ mmc_host_info(mmc, "W83L51xD");
if (host->chip_id != 0)
- printk(" id %x", (int)host->chip_id);
- printk(" at 0x%x irq %d", (int)host->base, (int)host->irq);
+ pr_cont(" id %x", (int)host->chip_id);
+ pr_cont(" at 0x%x irq %d", (int)host->base, (int)host->irq);
if (host->dma >= 0)
- printk(" dma %d", (int)host->dma);
+ pr_cont(" dma %d", (int)host->dma);
else
- printk(" FIFO");
+ pr_cont(" FIFO");
if (pnp)
- printk(" PnP");
- printk("\n");
+ pr_cont(" PnP");
+ pr_cont("\n");
return 0;
}
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 706f722..7483c7e 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -335,6 +335,17 @@ extern int mmc_add_host(struct mmc_host *);
extern void mmc_remove_host(struct mmc_host *);
extern void mmc_free_host(struct mmc_host *);
+#define mmc_host_err(mmc, fmt, ...) \
+ pr_err("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
+#define mmc_host_warn(mmc, fmt, ...) \
+ pr_warn("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
+#define mmc_host_notice(mmc, fmt, ...) \
+ pr_notice("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
+#define mmc_host_info(mmc, fmt, ...) \
+ pr_info("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
+#define mmc_host_debug(mmc, fmt, ...) \
+ pr_debug("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
+
static inline void *mmc_priv(struct mmc_host *host)
{
return (void *)host->private;
--
1.7.6.405.gc1be0
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 4/4] mmc: Add mmc_host_<level> logging
2011-11-15 23:32 ` [PATCH 4/4] mmc: Add mmc_host_<level> logging Joe Perches
@ 2011-11-16 0:52 ` NamJae Jeon
2011-11-16 0:57 ` Joe Perches
2011-11-16 5:00 ` David Brown
2011-11-16 5:31 ` NamJae Jeon
2 siblings, 1 reply; 19+ messages in thread
From: NamJae Jeon @ 2011-11-16 0:52 UTC (permalink / raw)
To: Joe Perches
Cc: Nicolas Ferre, David Brown, Daniel Walker, Bryan Huntsman,
Nicolas Pitre, Chris Ball, Guennadi Liakhovetski, Ian Molton,
Bruce Chang, Harald Welte, Pierre Ossman, linux-mmc,
linux-kernel, linux-arm-kernel, linux-arm-msm, linux-omap
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 103636 bytes --]
2011/11/16 Joe Perches <joe@perches.com>:
> Centralize the pr_<level> uses of mmc_hostname into specific
> mmc_host_<level> calls to allow a flexible presentation style
> and shorten the code a bit.
>
> Add mmc_host_<level> macros.
> Convert the logging calls from:
> Â Â Â Â pr_<level>("%s: ...", mmc_hostname(foo)
> to:
> Â Â Â Â mmc_host_<level>(foo, ...)
>
> Add a couple of missing newlines.
> Convert bare printks to pr_cont where appropriate.
> Spelling/typo fix of initialiazed to initialized.
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>  drivers/mmc/card/mmc_test.c   |  66 +++++++++++---------------
>  drivers/mmc/core/bus.c      |  27 +++++------
>  drivers/mmc/core/core.c     |  101 ++++++++++++++++++---------------------
>  drivers/mmc/core/host.c     |  13 ++---
>  drivers/mmc/core/mmc.c      |  67 ++++++++++---------------
>  drivers/mmc/core/mmc_ops.c    |  11 ++--
>  drivers/mmc/core/sd.c      |  62 ++++++++---------------
>  drivers/mmc/core/sdio.c     |  10 ++--
>  drivers/mmc/core/sdio_cis.c   |   9 ++--
>  drivers/mmc/core/sdio_irq.c   |   7 +--
>  drivers/mmc/host/at91_mci.c   |   9 ++--
>  drivers/mmc/host/dw_mmc.c    |   2 +-
>  drivers/mmc/host/msm_sdcc.c   |  101 ++++++++++++++++++---------------------
>  drivers/mmc/host/mvsdio.c    |  35 ++++++--------
>  drivers/mmc/host/omap_hsmmc.c  |   7 +--
>  drivers/mmc/host/pxamci.c    |   4 +-
>  drivers/mmc/host/sdhci.c     |  81 +++++++++++++------------------
>  drivers/mmc/host/tmio_mmc.c   |   4 +-
> Â drivers/mmc/host/tmio_mmc_pio.c | Â Â 4 +-
>  drivers/mmc/host/via-sdmmc.c   |  21 ++++-----
>  drivers/mmc/host/wbsd.c     |  27 +++++-----
>  include/linux/mmc/host.h     |  11 ++++
> Â 22 files changed, 298 insertions(+), 381 deletions(-)
>
> diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
> index f079555..5a263c6 100644
> --- a/drivers/mmc/card/mmc_test.c
> +++ b/drivers/mmc/card/mmc_test.c
> @@ -253,8 +253,7 @@ static int mmc_test_wait_busy(struct mmc_test_card *test)
> Â Â Â Â Â Â Â Â if (!busy && mmc_test_busy(&cmd)) {
> Â Â Â Â Â Â Â Â Â Â Â Â busy = 1;
> Â Â Â Â Â Â Â Â Â Â Â Â if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Warning: Host did not wait for busy state to end\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Warning: Host did not wait for busy state to end\n");
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } while (mmc_test_busy(&cmd));
>
> @@ -554,11 +553,11 @@ static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes,
> Â Â Â Â rate = mmc_test_rate(bytes, &ts);
> Â Â Â Â iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
>
> - Â Â Â pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
> - Â Â Â Â Â Â Â mmc_hostname(test->card->host), sectors, sectors >> 1,
> - Â Â Â Â Â Â Â (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
> - Â Â Â Â Â Â Â (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
> - Â Â Â Â Â Â Â iops / 100, iops % 100);
> + Â Â Â mmc_host_info(test->card->host, "Transfer of %u sectors (%u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
> + Â Â Â Â Â Â Â Â Â Â sectors, sectors >> 1,
> + Â Â Â Â Â Â Â Â Â Â (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
> + Â Â Â Â Â Â Â Â Â Â (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
> + Â Â Â Â Â Â Â Â Â Â iops / 100, iops % 100);
>
> Â Â Â Â mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops);
> Â }
> @@ -579,12 +578,12 @@ static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes,
> Â Â Â Â rate = mmc_test_rate(tot, &ts);
> Â Â Â Â iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
>
> - Â Â Â pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS, sg_len %d)\n",
> - Â Â Â Â Â Â Â mmc_hostname(test->card->host), count, sectors, count,
> - Â Â Â Â Â Â Â sectors >> 1, (sectors & 1 ? ".5" : ""),
> - Â Â Â Â Â Â Â (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
> - Â Â Â Â Â Â Â rate / 1000, rate / 1024, iops / 100, iops % 100,
> - Â Â Â Â Â Â Â test->area.sg_len);
> + Â Â Â mmc_host_info(test->card->host, "Transfer of %u x %u sectors (%u x %u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS, sg_len %d)\n",
> + Â Â Â Â Â Â Â Â Â Â count, sectors, count,
> + Â Â Â Â Â Â Â Â Â Â sectors >> 1, (sectors & 1 ? ".5" : ""),
> + Â Â Â Â Â Â Â Â Â Â (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
> + Â Â Â Â Â Â Â Â Â Â rate / 1000, rate / 1024, iops / 100, iops % 100,
> + Â Â Â Â Â Â Â Â Â Â test->area.sg_len);
I don't know why pr_info should be surely replaced by mmc_host_info.
if it is needed for only host name, I think that existing
pr_info/err/debug is sufficient.
>
> Â Â Â Â mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops);
> Â }
> @@ -1407,8 +1406,7 @@ static int mmc_test_multi_read_high(struct mmc_test_card *test)
>
> Â static int mmc_test_no_highmem(struct mmc_test_card *test)
> Â {
> - Â Â Â pr_info("%s: Highmem not configured - test skipped\n",
> - Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â mmc_host_info(test->card->host, "Highmem not configured - test skipped\n");
> Â Â Â Â return 0;
> Â }
>
> @@ -1434,8 +1432,7 @@ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â t->max_seg_sz, &t->sg_len, min_sg_len);
> Â Â Â Â }
> Â Â Â Â if (err)
> - Â Â Â Â Â Â Â pr_info("%s: Failed to map sg list\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Failed to map sg list\n");
> Â Â Â Â return err;
> Â }
>
> @@ -2689,8 +2686,8 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
> Â {
> Â Â Â Â int i, ret;
>
> - Â Â Â pr_info("%s: Starting tests of card %s...\n",
> - Â Â Â Â Â Â Â mmc_hostname(test->card->host), mmc_card_id(test->card));
> + Â Â Â mmc_host_info(test->card->host, "Starting tests of card %s...\n",
> + Â Â Â Â Â Â Â Â Â Â mmc_card_id(test->card));
>
> Â Â Â Â mmc_claim_host(test->card->host);
>
> @@ -2700,16 +2697,14 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
> Â Â Â Â Â Â Â Â if (testcase && ((i + 1) != testcase))
> Â Â Â Â Â Â Â Â Â Â Â Â continue;
>
> - Â Â Â Â Â Â Â pr_info("%s: Test case %d. %s...\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host), i + 1,
> - Â Â Â Â Â Â Â Â Â Â Â mmc_test_cases[i].name);
> + Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Test case %d. %s...\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â i + 1, mmc_test_cases[i].name);
>
> Â Â Â Â Â Â Â Â if (mmc_test_cases[i].prepare) {
> Â Â Â Â Â Â Â Â Â Â Â Â ret = mmc_test_cases[i].prepare(test);
> Â Â Â Â Â Â Â Â Â Â Â Â if (ret) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: Prepare stage failed! (%d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Result: Prepare stage failed! (%d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret);
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â continue;
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â }
> @@ -2736,24 +2731,20 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
> Â Â Â Â Â Â Â Â ret = mmc_test_cases[i].run(test);
> Â Â Â Â Â Â Â Â switch (ret) {
> Â Â Â Â Â Â Â Â case RESULT_OK:
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: OK\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Result: OK\n");
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â case RESULT_FAIL:
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: FAILED\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Result: FAILED\n");
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â case RESULT_UNSUP_HOST:
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: UNSUPPORTED (by host)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Result: UNSUPPORTED (by host)\n");
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â case RESULT_UNSUP_CARD:
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: UNSUPPORTED (by card)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Result: UNSUPPORTED (by card)\n");
> Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â default:
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Result: ERROR (%d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host), ret);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Result: ERROR (%d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret);
> Â Â Â Â Â Â Â Â }
>
> Â Â Â Â Â Â Â Â /* Save the result */
> @@ -2763,8 +2754,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
> Â Â Â Â Â Â Â Â if (mmc_test_cases[i].cleanup) {
> Â Â Â Â Â Â Â Â Â Â Â Â ret = mmc_test_cases[i].cleanup(test);
> Â Â Â Â Â Â Â Â Â Â Â Â if (ret) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: Warning: Cleanup stage failed! (%d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(test->card->host),
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(test->card->host, "Warning: Cleanup stage failed! (%d)\n",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ret);
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â }
> @@ -2772,7 +2762,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
>
> Â Â Â Â mmc_release_host(test->card->host);
>
> - Â Â Â pr_info("%s: Tests completed\n", mmc_hostname(test->card->host));
> + Â Â Â mmc_host_info(test->card->host, "Tests completed\n");
> Â }
>
> Â static void mmc_test_free_result(struct mmc_card *card)
> diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
> index 2e1f028..e976d85 100644
> --- a/drivers/mmc/core/bus.c
> +++ b/drivers/mmc/core/bus.c
> @@ -297,18 +297,16 @@ int mmc_add_card(struct mmc_card *card)
> Â Â Â Â }
>
> Â Â Â Â if (mmc_host_is_spi(card->host)) {
> - Â Â Â Â Â Â Â pr_info("%s: new %s%s%s card on SPI\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â mmc_card_highspeed(card) ? "high speed " : "",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_card_ddr_mode(card) ? "DDR " : "",
> - Â Â Â Â Â Â Â Â Â Â Â type);
> + Â Â Â Â Â Â Â mmc_host_info(card->host, "new %s%s%s card on SPI\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_card_highspeed(card) ? "high speed " : "",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_card_ddr_mode(card) ? "DDR " : "",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â type);
> Â Â Â Â } else {
> - Â Â Â Â Â Â Â pr_info("%s: new %s%s%s card at address %04x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â mmc_sd_card_uhs(card) ? "ultra high speed " :
> - Â Â Â Â Â Â Â Â Â Â Â mmc_card_highspeed(card) ? "high speed " : "",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_card_ddr_mode(card) ? "DDR " : "",
> - Â Â Â Â Â Â Â Â Â Â Â type, card->rca);
> + Â Â Â Â Â Â Â mmc_host_info(card->host, "new %s%s%s card at address %04x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_sd_card_uhs(card) ? "ultra high speed " :
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_card_highspeed(card) ? "high speed " : "",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_card_ddr_mode(card) ? "DDR " : "",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â type, card->rca);
> Â Â Â Â }
>
> Â #ifdef CONFIG_DEBUG_FS
> @@ -336,11 +334,10 @@ void mmc_remove_card(struct mmc_card *card)
>
> Â Â Â Â if (mmc_card_present(card)) {
> Â Â Â Â Â Â Â Â if (mmc_host_is_spi(card->host)) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: SPI card removed\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(card->host, "SPI card removed\n");
> Â Â Â Â Â Â Â Â } else {
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: card %04x removed\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), card->rca);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(card->host, "card %04x removed\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â card->rca);
> Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â device_del(&card->dev);
> Â Â Â Â }
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 39e1311..39779d7 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -155,23 +155,23 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
>
> Â Â Â Â Â Â Â Â led_trigger_event(host->led, LED_OFF);
>
> - Â Â Â Â Â Â Â pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), cmd->opcode, err,
> - Â Â Â Â Â Â Â Â Â Â Â Â cmd->resp[0], cmd->resp[1],
> - Â Â Â Â Â Â Â Â Â Â Â Â cmd->resp[2], cmd->resp[3]);
> + Â Â Â Â Â Â Â mmc_host_debug(host, "req done (CMD%u): %d: %08x %08x %08x %08x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â cmd->opcode, err,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â cmd->resp[0], cmd->resp[1],
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â cmd->resp[2], cmd->resp[3]);
>
> Â Â Â Â Â Â Â Â if (mrq->data) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: Â Â %d bytes transferred: %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->bytes_xfered, mrq->data->error);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_debug(host, " Â Â %d bytes transferred: %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->bytes_xfered,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->error);
> Â Â Â Â Â Â Â Â }
>
> Â Â Â Â Â Â Â Â if (mrq->stop) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: Â Â (CMD%u): %d: %08x %08x %08x %08x\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), mrq->stop->opcode,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->error,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->resp[0], mrq->stop->resp[1],
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->resp[2], mrq->stop->resp[3]);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_debug(host, " Â Â (CMD%u): %d: %08x %08x %08x %08x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->opcode,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->error,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->resp[0], mrq->stop->resp[1],
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->resp[2], mrq->stop->resp[3]);
> Â Â Â Â Â Â Â Â }
>
> Â Â Â Â Â Â Â Â if (mrq->done)
> @@ -191,22 +191,21 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
> Â Â Â Â struct scatterlist *sg;
> Â #endif
>
> - Â Â Â pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
> - Â Â Â Â Â Â Â Â mmc_hostname(host), mrq->cmd->opcode,
> - Â Â Â Â Â Â Â Â mrq->cmd->arg, mrq->cmd->flags);
> + Â Â Â mmc_host_debug(host, "starting CMD%u arg %08x flags %08x\n",
> + Â Â Â Â Â Â Â Â Â Â Â mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags);
>
> Â Â Â Â if (mrq->data) {
> - Â Â Â Â Â Â Â pr_debug("%s: Â Â blksz %d blocks %d flags %08x tsac %d ms nsac %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), mrq->data->blksz,
> - Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->blocks, mrq->data->flags,
> - Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->timeout_ns / 1000000,
> - Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->timeout_clks);
> + Â Â Â Â Â Â Â mmc_host_debug(host, " Â Â blksz %d blocks %d flags %08x tsac %d ms nsac %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->blksz,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->blocks, mrq->data->flags,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->timeout_ns / 1000000,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->data->timeout_clks);
> Â Â Â Â }
>
> Â Â Â Â if (mrq->stop) {
> - Â Â Â Â Â Â Â pr_debug("%s: Â Â CMD%u arg %08x flags %08x\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), mrq->stop->opcode,
> - Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->arg, mrq->stop->flags);
> + Â Â Â Â Â Â Â mmc_host_debug(host, " Â Â CMD%u arg %08x flags %08x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->opcode,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mrq->stop->arg, mrq->stop->flags);
> Â Â Â Â }
>
> Â Â Â Â WARN_ON(!host->claimed);
> @@ -264,8 +263,8 @@ static void mmc_wait_for_req_done(struct mmc_host *host,
> Â Â Â Â Â Â Â Â if (!cmd->error || !cmd->retries)
> Â Â Â Â Â Â Â Â Â Â Â Â break;
>
> - Â Â Â Â Â Â Â pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), cmd->opcode, cmd->error);
> + Â Â Â Â Â Â Â mmc_host_debug(host, "req failed (CMD%u): %d, retrying...\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â cmd->opcode, cmd->error);
> Â Â Â Â Â Â Â Â cmd->retries--;
> Â Â Â Â Â Â Â Â cmd->error = 0;
> Â Â Â Â Â Â Â Â host->ops->request(host, mrq);
> @@ -396,14 +395,14 @@ int mmc_interrupt_hpi(struct mmc_card *card)
> Â Â Â Â BUG_ON(!card);
>
> Â Â Â Â if (!card->ext_csd.hpi_en) {
> - Â Â Â Â Â Â Â pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_info(card->host, "HPI enable bit unset\n");
> Â Â Â Â Â Â Â Â return 1;
> Â Â Â Â }
>
> Â Â Â Â mmc_claim_host(card->host);
> Â Â Â Â err = mmc_send_status(card, &status);
> Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "Get card status fail\n");
> Â Â Â Â Â Â Â Â goto out;
> Â Â Â Â }
>
> @@ -422,15 +421,15 @@ int mmc_interrupt_hpi(struct mmc_card *card)
> Â Â Â Â Â Â Â Â Â Â Â Â */
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_send_hpi_cmd(card, &status);
> Â Â Â Â Â Â Â Â Â Â Â Â if (err)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: abort HPI (%d error)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), err);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_debug(card->host, "abort HPI (%d error)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err);
>
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_send_status(card, &status);
> Â Â Â Â Â Â Â Â Â Â Â Â if (err)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â break;
> Â Â Â Â Â Â Â Â } while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
> Â Â Â Â } else
> - Â Â Â Â Â Â Â pr_debug("%s: Left prg-state\n", mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_debug(card->host, "Left prg-state\n");
>
> Â out:
> Â Â Â Â mmc_release_host(card->host);
> @@ -620,8 +619,7 @@ int mmc_host_enable(struct mmc_host *host)
> Â Â Â Â Â Â Â Â host->en_dis_recurs = 0;
>
> Â Â Â Â Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: enable error %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), err);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_debug(host, "enable error %d\n", err);
> Â Â Â Â Â Â Â Â Â Â Â Â return err;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -640,8 +638,7 @@ static int mmc_host_do_disable(struct mmc_host *host, int lazy)
> Â Â Â Â Â Â Â Â host->en_dis_recurs = 0;
>
> Â Â Â Â Â Â Â Â if (err < 0) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: disable error %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), err);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_debug(host, "disable error %d\n", err);
> Â Â Â Â Â Â Â Â Â Â Â Â return err;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â if (err > 0) {
> @@ -844,10 +841,10 @@ static inline void mmc_set_ios(struct mmc_host *host)
> Â {
> Â Â Â Â struct mmc_ios *ios = &host->ios;
>
> - Â Â Â pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
> - Â Â Â Â Â Â Â Â mmc_hostname(host), ios->clock, ios->bus_mode,
> - Â Â Â Â Â Â Â Â ios->power_mode, ios->chip_select, ios->vdd,
> - Â Â Â Â Â Â Â Â ios->bus_width, ios->timing);
> + Â Â Â mmc_host_debug(host, "clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
> + Â Â Â Â Â Â Â Â Â Â Â ios->clock, ios->bus_mode,
> + Â Â Â Â Â Â Â Â Â Â Â ios->power_mode, ios->chip_select, ios->vdd,
> + Â Â Â Â Â Â Â Â Â Â Â ios->bus_width, ios->timing);
>
> Â Â Â Â if (ios->clock > 0)
> Â Â Â Â Â Â Â Â mmc_set_ungated(host);
> @@ -1164,8 +1161,7 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
> Â Â Â Â Â Â Â Â mmc_set_ios(host);
> Â Â Â Â Â Â Â Â mmc_host_clk_release(host);
> Â Â Â Â } else {
> - Â Â Â Â Â Â Â pr_warn("%s: host doesn't support card's voltages\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_warn(host, "host doesn't support card's voltages\n");
> Â Â Â Â Â Â Â Â ocr = 0;
> Â Â Â Â }
>
> @@ -1893,8 +1889,8 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card)
> Â Â Â Â } else if (max_discard < card->erase_size) {
> Â Â Â Â Â Â Â Â max_discard = 0;
> Â Â Â Â }
> - Â Â Â pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n",
> - Â Â Â Â Â Â Â Â mmc_hostname(host), max_discard, host->max_discard_to);
> + Â Â Â mmc_host_debug(host, "calculated max. discard sectors %u for timeout %u ms\n",
> + Â Â Â Â Â Â Â Â Â Â Â max_discard, host->max_discard_to);
> Â Â Â Â return max_discard;
> Â }
> Â EXPORT_SYMBOL(mmc_calc_max_discard);
> @@ -2006,8 +2002,8 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
> Â Â Â Â host->f_init = freq;
>
> Â #ifdef CONFIG_MMC_DEBUG
> - Â Â Â pr_info("%s: %s: trying to init card at %u Hz\n",
> - Â Â Â Â Â Â Â mmc_hostname(host), __func__, host->f_init);
> + Â Â Â mmc_host_info(host, "%s: trying to init card at %u Hz\n",
> + Â Â Â Â Â Â Â Â Â Â __func__, host->f_init);
> Â #endif
> Â Â Â Â mmc_power_up(host);
>
> @@ -2142,7 +2138,7 @@ int mmc_power_save_host(struct mmc_host *host)
> Â Â Â Â int ret = 0;
>
> Â #ifdef CONFIG_MMC_DEBUG
> - Â Â Â pr_info("%s: %s: powering down\n", mmc_hostname(host), __func__);
> + Â Â Â mmc_host_info(host, "%s: powering down\n", __func__);
> Â #endif
>
> Â Â Â Â mmc_bus_get(host);
> @@ -2168,7 +2164,7 @@ int mmc_power_restore_host(struct mmc_host *host)
> Â Â Â Â int ret;
>
> Â #ifdef CONFIG_MMC_DEBUG
> - Â Â Â pr_info("%s: %s: powering up\n", mmc_hostname(host), __func__);
> + Â Â Â mmc_host_info(host, "%s: powering up\n", __func__);
> Â #endif
>
> Â Â Â Â mmc_bus_get(host);
> @@ -2244,8 +2240,7 @@ int mmc_flush_cache(struct mmc_card *card)
> Â Â Â Â Â Â Â Â err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â EXT_CSD_FLUSH_CACHE, 1, 0);
> Â Â Â Â Â Â Â Â if (err)
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: cache flush error %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), err);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(card->host, "cache flush error %d\n", err);
> Â Â Â Â }
>
> Â Â Â Â return err;
> @@ -2274,10 +2269,8 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â EXT_CSD_CACHE_CTRL, enable, 0);
> Â Â Â Â Â Â Â Â if (err)
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: cache %s error %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â enable ? "on" : "off",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(card->host, "cache %s error %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â enable ? "on" : "off", err);
> Â Â Â Â Â Â Â Â else
> Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.cache_ctrl = enable;
> Â Â Â Â }
> @@ -2375,8 +2368,8 @@ int mmc_resume_host(struct mmc_host *host)
> Â Â Â Â Â Â Â Â BUG_ON(!host->bus_ops->resume);
> Â Â Â Â Â Â Â Â err = host->bus_ops->resume(host);
> Â Â Â Â Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: error %d during resume (card was removed?)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), err);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(host, "error %d during resume (card was removed?)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err);
> Â Â Â Â Â Â Â Â Â Â Â Â err = 0;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 7f963c0..40d177f 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -75,8 +75,7 @@ static ssize_t clkgate_delay_store(struct device *dev,
> Â Â Â Â host->clkgate_delay = value;
> Â Â Â Â spin_unlock_irqrestore(&host->clk_lock, flags);
>
> - Â Â Â pr_info("%s: clock gate delay set to %lu ms\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), value);
> + Â Â Â mmc_host_info(host, "clock gate delay set to %lu ms\n", value);
> Â Â Â Â return count;
> Â }
>
> @@ -94,8 +93,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
> Â Â Â Â unsigned long flags;
>
> Â Â Â Â if (!freq) {
> - Â Â Â Â Â Â Â pr_debug("%s: frequency set to 0 in disable function, this means the clock is already disabled\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_debug(host, "frequency set to 0 in disable function, this means the clock is already disabled\n");
> Â Â Â Â Â Â Â Â return;
> Â Â Â Â }
> Â Â Â Â /*
> @@ -126,7 +124,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
> Â Â Â Â Â Â Â Â /* This will set host->ios.clock to 0 */
> Â Â Â Â Â Â Â Â mmc_gate_clock(host);
> Â Â Â Â Â Â Â Â spin_lock_irqsave(&host->clk_lock, flags);
> - Â Â Â Â Â Â Â pr_debug("%s: gated MCI clock\n", mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_debug(host, "gated MCI clock\n");
> Â Â Â Â }
> Â Â Â Â spin_unlock_irqrestore(&host->clk_lock, flags);
> Â Â Â Â mutex_unlock(&host->clk_gate_mutex);
> @@ -163,7 +161,7 @@ void mmc_host_clk_hold(struct mmc_host *host)
> Â Â Â Â Â Â Â Â spin_unlock_irqrestore(&host->clk_lock, flags);
> Â Â Â Â Â Â Â Â mmc_ungate_clock(host);
> Â Â Â Â Â Â Â Â spin_lock_irqsave(&host->clk_lock, flags);
> - Â Â Â Â Â Â Â pr_debug("%s: ungated MCI clock\n", mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_debug(host, "ungated MCI clock\n");
> Â Â Â Â }
> Â Â Â Â host->clk_requests++;
> Â Â Â Â spin_unlock_irqrestore(&host->clk_lock, flags);
> @@ -277,8 +275,7 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host)
> Â Â Â Â host->clkgate_delay_attr.attr.name = "clkgate_delay";
> Â Â Â Â host->clkgate_delay_attr.attr.mode = S_IRUGO | S_IWUSR;
> Â Â Â Â if (device_create_file(&host->class_dev, &host->clkgate_delay_attr))
> - Â Â Â Â Â Â Â pr_err("%s: Failed to create clkgate_delay sysfs entry\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_err(host, "Failed to create clkgate_delay sysfs entry\n");
> Â }
> Â #else
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index f6db788..c7efe5a 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -102,8 +102,8 @@ static int mmc_decode_cid(struct mmc_card *card)
> Â Â Â Â Â Â Â Â break;
>
> Â Â Â Â default:
> - Â Â Â Â Â Â Â pr_err("%s: card has unknown MMCA version %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), card->csd.mmca_vsn);
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "card has unknown MMCA version %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â card->csd.mmca_vsn);
> Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â }
>
> @@ -136,8 +136,8 @@ static int mmc_decode_csd(struct mmc_card *card)
> Â Â Â Â */
> Â Â Â Â csd->structure = UNSTUFF_BITS(resp, 126, 2);
> Â Â Â Â if (csd->structure == 0) {
> - Â Â Â Â Â Â Â pr_err("%s: unrecognised CSD structure version %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), csd->structure);
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "unrecognised CSD structure version %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â csd->structure);
> Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â }
>
> @@ -196,8 +196,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
> Â Â Â Â */
> Â Â Â Â ext_csd = kmalloc(512, GFP_KERNEL);
> Â Â Â Â if (!ext_csd) {
> - Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer to receive the ext_csd\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "could not allocate a buffer to receive the ext_csd\n");
> Â Â Â Â Â Â Â Â return -ENOMEM;
> Â Â Â Â }
>
> @@ -218,11 +217,9 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
> Â Â Â Â Â Â Â Â * stored in their CSD.
> Â Â Â Â Â Â Â Â */
> Â Â Â Â Â Â Â Â if (card->csd.capacity == (4096 * 512)) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(card->host, "unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n");
> Â Â Â Â Â Â Â Â } else {
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(card->host, "unable to read EXT_CSD, performance might suffer\n");
> Â Â Â Â Â Â Â Â Â Â Â Â err = 0;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } else
> @@ -249,9 +246,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
> Â Â Â Â card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
> Â Â Â Â if (card->csd.structure == 3) {
> Â Â Â Â Â Â Â Â if (card->ext_csd.raw_ext_csd_structure > 2) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: unrecognised EXT_CSD structure version %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.raw_ext_csd_structure);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(card->host, "unrecognised EXT_CSD structure version %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.raw_ext_csd_structure);
> Â Â Â Â Â Â Â Â Â Â Â Â err = -EINVAL;
> Â Â Â Â Â Â Â Â Â Â Â Â goto out;
> Â Â Â Â Â Â Â Â }
> @@ -259,8 +255,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
>
> Â Â Â Â card->ext_csd.rev = ext_csd[EXT_CSD_REV];
> Â Â Â Â if (card->ext_csd.rev > 6) {
> - Â Â Â Â Â Â Â pr_err("%s: unrecognised EXT_CSD revision %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), card->ext_csd.rev);
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "unrecognised EXT_CSD revision %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.rev);
> Â Â Â Â Â Â Â Â err = -EINVAL;
> Â Â Â Â Â Â Â Â goto out;
> Â Â Â Â }
> @@ -305,8 +301,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
> Â Â Â Â Â Â Â Â break;
> Â Â Â Â default:
> Â Â Â Â Â Â Â Â /* MMC v4 spec says this cannot happen */
> - Â Â Â Â Â Â Â pr_warn("%s: card is mmc v4 but doesn't support any high-speed modes\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "card is mmc v4 but doesn't support any high-speed modes\n");
> Â Â Â Â }
>
> Â Â Â Â card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT];
> @@ -659,8 +654,7 @@ static int mmc_select_powerclass(struct mmc_card *card,
> Â Â Â Â Â Â Â Â Â Â Â Â index = EXT_CSD_PWR_CL_200_360;
> Â Â Â Â Â Â Â Â break;
> Â Â Â Â default:
> - Â Â Â Â Â Â Â pr_warn("%s: Voltage range not supported for power class\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_warn(host, "Voltage range not supported for power class\n");
> Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â }
>
> @@ -899,8 +893,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> Â Â Â Â Â Â Â Â Â Â Â Â goto free_card;
>
> Â Â Â Â Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: switch to highspeed failed\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(card->host, "switch to highspeed failed\n");
> Â Â Â Â Â Â Â Â Â Â Â Â err = 0;
> Â Â Â Â Â Â Â Â } else {
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_card_set_highspeed(card);
> @@ -917,8 +910,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> Â Â Â Â Â Â Â Â if (err && err != -EBADMSG)
> Â Â Â Â Â Â Â Â Â Â Â Â goto free_card;
> Â Â Â Â Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: Enabling HPI failed\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(card->host, "Enabling HPI failed\n");
> Â Â Â Â Â Â Â Â Â Â Â Â err = 0;
> Â Â Â Â Â Â Â Â } else
> Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.hpi_en = 1;
> @@ -982,9 +974,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ext_csd);
> Â Â Â Â Â Â Â Â Â Â Â Â if (err)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: power class selection to bus width %d failed\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 << bus_width);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(card->host, "power class selection to bus width %d failed\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 << bus_width);
>
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â EXT_CSD_BUS_WIDTH,
> @@ -1012,9 +1003,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ext_csd);
> Â Â Â Â Â Â Â Â Â Â Â Â if (err)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: power class selection to bus width %d ddr %d failed\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 << bus_width, ddr);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(card->host, "power class selection to bus width %d ddr %d failed\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 << bus_width, ddr);
>
> Â Â Â Â Â Â Â Â Â Â Â Â err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â EXT_CSD_BUS_WIDTH,
> @@ -1022,9 +1012,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â card->ext_csd.generic_cmd6_time);
> Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: switch to bus width %d ddr %d failed\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 << bus_width, ddr);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(card->host, "switch to bus width %d ddr %d failed\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 << bus_width, ddr);
> Â Â Â Â Â Â Â Â Â Â Â Â goto free_card;
> Â Â Â Â Â Â Â Â } else if (ddr) {
> Â Â Â Â Â Â Â Â Â Â Â Â /*
> @@ -1187,8 +1176,8 @@ static int mmc_sleep(struct mmc_host *host)
> Â Â Â Â if (card && card->ext_csd.rev >= 3) {
> Â Â Â Â Â Â Â Â err = mmc_card_sleepawake(host, 1);
> Â Â Â Â Â Â Â Â if (err < 0)
> - Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: Error %d while putting card into sleep",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), err);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_debug(host, "Error %d while putting card into sleep\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err);
> Â Â Â Â }
>
> Â Â Â Â return err;
> @@ -1202,8 +1191,8 @@ static int mmc_awake(struct mmc_host *host)
> Â Â Â Â if (card && card->ext_csd.rev >= 3) {
> Â Â Â Â Â Â Â Â err = mmc_card_sleepawake(host, 0);
> Â Â Â Â Â Â Â Â if (err < 0)
> - Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: Error %d while awaking sleeping card",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), err);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_debug(host, "Error %d while awaking sleeping card\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err);
> Â Â Â Â }
>
> Â Â Â Â return err;
> @@ -1277,8 +1266,7 @@ int mmc_attach_mmc(struct mmc_host *host)
> Â Â Â Â * support.
> Â Â Â Â */
> Â Â Â Â if (ocr & 0x7F) {
> - Â Â Â Â Â Â Â pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_warn(host, "card claims to support voltages below the defined range. These will be ignored.\n");
> Â Â Â Â Â Â Â Â ocr &= ~0x7F;
> Â Â Â Â }
>
> @@ -1315,8 +1303,7 @@ remove_card:
> Â err:
> Â Â Â Â mmc_detach_bus(host);
>
> - Â Â Â pr_err("%s: error %d whilst initialising MMC card\n",
> - Â Â Â Â Â Â Â mmc_hostname(host), err);
> + Â Â Â mmc_host_err(host, "error %d whilst initialising MMC card\n", err);
>
> Â Â Â Â return err;
> Â }
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index 7c7388c..c1e0b9c 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -415,8 +415,8 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
> Â Â Â Â Â Â Â Â Â Â Â Â return -EBADMSG;
> Â Â Â Â } else {
> Â Â Â Â Â Â Â Â if (status & 0xFDFFA000)
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: unexpected status %#x after switch\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), status);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(card->host, "unexpected status %#x after switch\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â status);
> Â Â Â Â Â Â Â Â if (status & R1_SWITCH_ERROR)
> Â Â Â Â Â Â Â Â Â Â Â Â return -EBADMSG;
> Â Â Â Â }
> @@ -477,8 +477,7 @@ mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
> Â Â Â Â else if (len == 4)
> Â Â Â Â Â Â Â Â test_buf = testdata_4bit;
> Â Â Â Â else {
> - Â Â Â Â Â Â Â pr_err("%s: Invalid bus_width %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host), len);
> + Â Â Â Â Â Â Â mmc_host_err(host, "Invalid bus_width %d\n", len);
> Â Â Â Â Â Â Â Â kfree(data_buf);
> Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â }
> @@ -569,8 +568,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
>
> Â Â Â Â err = mmc_wait_for_cmd(card->host, &cmd, 0);
> Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â pr_warn("%s: error %d interrupting operation. HPI command response %#x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), err, cmd.resp[0]);
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "error %d interrupting operation. HPI command response %#x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â err, cmd.resp[0]);
> Â Â Â Â Â Â Â Â return err;
> Â Â Â Â }
> Â Â Â Â if (status)
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index 1492b7b..2b0fba9 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -166,8 +166,8 @@ static int mmc_decode_csd(struct mmc_card *card)
> Â Â Â Â Â Â Â Â csd->erase_size = 1;
> Â Â Â Â Â Â Â Â break;
> Â Â Â Â default:
> - Â Â Â Â Â Â Â pr_err("%s: unrecognised CSD structure version %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), csd_struct);
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "unrecognised CSD structure version %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â csd_struct);
> Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â }
>
> @@ -190,8 +190,8 @@ static int mmc_decode_scr(struct mmc_card *card)
>
> Â Â Â Â scr_struct = UNSTUFF_BITS(resp, 60, 4);
> Â Â Â Â if (scr_struct != 0) {
> - Â Â Â Â Â Â Â pr_err("%s: unrecognised SCR structure version %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), scr_struct);
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "unrecognised SCR structure version %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â scr_struct);
> Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â }
>
> @@ -221,8 +221,7 @@ static int mmc_read_ssr(struct mmc_card *card)
> Â Â Â Â u32 *ssr;
>
> Â Â Â Â if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
> - Â Â Â Â Â Â Â pr_warn("%s: card lacks mandatory SD Status function\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "card lacks mandatory SD Status function\n");
> Â Â Â Â Â Â Â Â return 0;
> Â Â Â Â }
>
> @@ -232,8 +231,7 @@ static int mmc_read_ssr(struct mmc_card *card)
>
> Â Â Â Â err = mmc_app_sd_status(card, ssr);
> Â Â Â Â if (err) {
> - Â Â Â Â Â Â Â pr_warn("%s: problem reading SD Status register\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "problem reading SD Status register\n");
> Â Â Â Â Â Â Â Â err = 0;
> Â Â Â Â Â Â Â Â goto out;
> Â Â Â Â }
> @@ -256,8 +254,7 @@ static int mmc_read_ssr(struct mmc_card *card)
> Â Â Â Â Â Â Â Â Â Â Â Â card->ssr.erase_offset = eo * 1000;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } else {
> - Â Â Â Â Â Â Â pr_warn("%s: SD Status: Invalid Allocation Unit size\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "SD Status: Invalid Allocation Unit size\n");
> Â Â Â Â }
> Â out:
> Â Â Â Â kfree(ssr);
> @@ -276,8 +273,7 @@ static int mmc_read_switch(struct mmc_card *card)
> Â Â Â Â Â Â Â Â return 0;
>
> Â Â Â Â if (!(card->csd.cmdclass & CCC_SWITCH)) {
> - Â Â Â Â Â Â Â pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "card lacks mandatory switch function, performance might suffer\n");
> Â Â Â Â Â Â Â Â return 0;
> Â Â Â Â }
>
> @@ -285,8 +281,7 @@ static int mmc_read_switch(struct mmc_card *card)
>
> Â Â Â Â status = kmalloc(64, GFP_KERNEL);
> Â Â Â Â if (!status) {
> - Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for switch capabilities\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "could not allocate a buffer for switch capabilities\n");
> Â Â Â Â Â Â Â Â return -ENOMEM;
> Â Â Â Â }
>
> @@ -300,8 +295,7 @@ static int mmc_read_switch(struct mmc_card *card)
> Â Â Â Â Â Â Â Â if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
> Â Â Â Â Â Â Â Â Â Â Â Â goto out;
>
> - Â Â Â Â Â Â Â pr_warn("%s: problem reading Bus Speed modes\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "problem reading Bus Speed modes\n");
> Â Â Â Â Â Â Â Â err = 0;
>
> Â Â Â Â Â Â Â Â goto out;
> @@ -323,8 +317,7 @@ static int mmc_read_switch(struct mmc_card *card)
> Â Â Â Â Â Â Â Â Â Â Â Â if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â goto out;
>
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: problem reading Driver Strength\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(card->host, "problem reading Driver Strength\n");
> Â Â Â Â Â Â Â Â Â Â Â Â err = 0;
>
> Â Â Â Â Â Â Â Â Â Â Â Â goto out;
> @@ -342,8 +335,7 @@ static int mmc_read_switch(struct mmc_card *card)
> Â Â Â Â Â Â Â Â Â Â Â Â if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â goto out;
>
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: problem reading Current Limit\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(card->host, "problem reading Current Limit\n");
> Â Â Â Â Â Â Â Â Â Â Â Â err = 0;
>
> Â Â Â Â Â Â Â Â Â Â Â Â goto out;
> @@ -382,8 +374,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
>
> Â Â Â Â status = kmalloc(64, GFP_KERNEL);
> Â Â Â Â if (!status) {
> - Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for switch capabilities\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "could not allocate a buffer for switch capabilities\n");
> Â Â Â Â Â Â Â Â return -ENOMEM;
> Â Â Â Â }
>
> @@ -392,8 +383,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
> Â Â Â Â Â Â Â Â goto out;
>
> Â Â Â Â if ((status[16] & 0xF) != 1) {
> - Â Â Â Â Â Â Â pr_warn("%s: problem switching card into high-speed mode!\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "problem switching card into high-speed mode!\n");
> Â Â Â Â Â Â Â Â err = 0;
> Â Â Â Â } else {
> Â Â Â Â Â Â Â Â err = 1;
> @@ -457,8 +447,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
> Â Â Â Â Â Â Â Â return err;
>
> Â Â Â Â if ((status[15] & 0xF) != drive_strength) {
> - Â Â Â Â Â Â Â pr_warn("%s: problem setting drive strength!\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "problem setting drive strength!\n");
> Â Â Â Â Â Â Â Â return 0;
> Â Â Â Â }
>
> @@ -536,8 +525,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
> Â Â Â Â Â Â Â Â return err;
>
> Â Â Â Â if ((status[16] & 0xF) != card->sd_bus_speed)
> - Â Â Â Â Â Â Â pr_warn("%s: problem setting bus speed mode!\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "problem setting bus speed mode!\n");
> Â Â Â Â else {
> Â Â Â Â Â Â Â Â mmc_set_timing(card->host, timing);
> Â Â Â Â Â Â Â Â mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr);
> @@ -598,8 +586,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
> Â Â Â Â Â Â Â Â return err;
>
> Â Â Â Â if (((status[15] >> 4) & 0x0F) != current_limit)
> - Â Â Â Â Â Â Â pr_warn("%s: problem setting current limit!\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_warn(card->host, "problem setting current limit!\n");
>
> Â Â Â Â return 0;
> Â }
> @@ -620,8 +607,7 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
>
> Â Â Â Â status = kmalloc(64, GFP_KERNEL);
> Â Â Â Â if (!status) {
> - Â Â Â Â Â Â Â pr_err("%s: could not allocate a buffer for switch capabilities\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host));
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "could not allocate a buffer for switch capabilities\n");
> Â Â Â Â Â Â Â Â return -ENOMEM;
> Â Â Â Â }
>
> @@ -850,8 +836,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
> Â Â Â Â Â Â Â Â Â Â Â Â ro = host->ops->get_ro(host);
>
> Â Â Â Â Â Â Â Â if (ro < 0) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: host does not support reading read-only switch. assuming write-enable.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(host, "host does not support reading read-only switch. assuming write-enable.\n");
> Â Â Â Â Â Â Â Â } else if (ro > 0) {
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_card_set_readonly(card);
> Â Â Â Â Â Â Â Â }
> @@ -1162,15 +1147,13 @@ int mmc_attach_sd(struct mmc_host *host)
> Â Â Â Â * support.
> Â Â Â Â */
> Â Â Â Â if (ocr & 0x7F) {
> - Â Â Â Â Â Â Â pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_warn(host, "card claims to support voltages below the defined range. These will be ignored.\n");
> Â Â Â Â Â Â Â Â ocr &= ~0x7F;
> Â Â Â Â }
>
> Â Â Â Â if ((ocr & MMC_VDD_165_195) &&
> Â Â Â Â Â Â !(host->ocr_avail_sd & MMC_VDD_165_195)) {
> - Â Â Â Â Â Â Â pr_warn("%s: SD card claims to support the incompletely defined 'low voltage range'. This will be ignored.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_warn(host, "SD card claims to support the incompletely defined 'low voltage range'. This will be ignored.\n");
> Â Â Â Â Â Â Â Â ocr &= ~MMC_VDD_165_195;
> Â Â Â Â }
>
> @@ -1207,8 +1190,7 @@ remove_card:
> Â err:
> Â Â Â Â mmc_detach_bus(host);
>
> - Â Â Â pr_err("%s: error %d whilst initialising SD card\n",
> - Â Â Â Â Â Â Â mmc_hostname(host), err);
> + Â Â Â mmc_host_err(host, "error %d whilst initialising SD card\n", err);
>
> Â Â Â Â return err;
> Â }
> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
> index e994a89..7bae59b 100644
> --- a/drivers/mmc/core/sdio.c
> +++ b/drivers/mmc/core/sdio.c
> @@ -112,8 +112,8 @@ static int sdio_read_cccr(struct mmc_card *card)
> Â Â Â Â cccr_vsn = data & 0x0f;
>
> Â Â Â Â if (cccr_vsn > SDIO_CCCR_REV_3_00) {
> - Â Â Â Â Â Â Â pr_err("%s: unrecognised CCCR structure version %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), cccr_vsn);
> + Â Â Â Â Â Â Â mmc_host_err(card->host, "unrecognised CCCR structure version %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â cccr_vsn);
> Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â }
>
> @@ -777,8 +777,7 @@ int mmc_attach_sdio(struct mmc_host *host)
> Â Â Â Â * support.
> Â Â Â Â */
> Â Â Â Â if (ocr & 0x7F) {
> - Â Â Â Â Â Â Â pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host));
> + Â Â Â Â Â Â Â mmc_host_warn(host, "card claims to support voltages below the defined range. These will be ignored.\n");
> Â Â Â Â Â Â Â Â ocr &= ~0x7F;
> Â Â Â Â }
>
> @@ -873,8 +872,7 @@ remove:
> Â err:
> Â Â Â Â mmc_detach_bus(host);
>
> - Â Â Â pr_err("%s: error %d whilst initialising SDIO card\n",
> - Â Â Â Â Â Â Â mmc_hostname(host), err);
> + Â Â Â mmc_host_err(host, "error %d whilst initialising SDIO card\n", err);
>
> Â Â Â Â return err;
> Â }
> diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
> index 6536fce..e50fecb 100644
> --- a/drivers/mmc/core/sdio_cis.c
> +++ b/drivers/mmc/core/sdio_cis.c
> @@ -132,8 +132,8 @@ static int cis_tpl_parse(struct mmc_card *card, struct sdio_func *func,
> Â Â Â Â Â Â Â Â Â Â Â Â ret = -EINVAL;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â if (ret && ret != -EILSEQ && ret != -ENOENT) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host), tpl_descr, code, size);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(card->host, "bad %s tuple 0x%02x (%u bytes)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â tpl_descr, code, size);
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } else {
> Â Â Â Â Â Â Â Â /* unknown tuple */
> @@ -313,9 +313,8 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
>
> Â Â Â Â Â Â Â Â Â Â Â Â if (ret == -ENOENT) {
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â /* warn about unknown tuples */
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: queuing unknown CIS tuple 0x%02x (%u bytes)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(card->host),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â tpl_code, tpl_link);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(card->host, "queuing unknown CIS tuple 0x%02x (%u bytes)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â tpl_code, tpl_link);
> Â Â Â Â Â Â Â Â Â Â Â Â }
>
> Â Â Â Â Â Â Â Â Â Â Â Â /* keep on analyzing tuples */
> diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
> index 533d0e5..3aa13bf 100644
> --- a/drivers/mmc/core/sdio_irq.c
> +++ b/drivers/mmc/core/sdio_irq.c
> @@ -97,8 +97,8 @@ static int sdio_irq_thread(void *_host)
> Â Â Â Â period = (host->caps & MMC_CAP_SDIO_IRQ) ?
> Â Â Â Â Â Â Â Â MAX_SCHEDULE_TIMEOUT : idle_period;
>
> - Â Â Â pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n",
> - Â Â Â Â Â Â Â Â mmc_hostname(host), period);
> + Â Â Â mmc_host_debug(host, "IRQ thread started (poll period = %lu jiffies)\n",
> + Â Â Â Â Â Â Â Â Â Â Â period);
>
> Â Â Â Â do {
> Â Â Â Â Â Â Â Â /*
> @@ -157,8 +157,7 @@ static int sdio_irq_thread(void *_host)
> Â Â Â Â if (host->caps & MMC_CAP_SDIO_IRQ)
> Â Â Â Â Â Â Â Â host->ops->enable_sdio_irq(host, 0);
>
> - Â Â Â pr_debug("%s: IRQ thread exiting with code %d\n",
> - Â Â Â Â Â Â Â Â mmc_hostname(host), ret);
> + Â Â Â mmc_host_debug(host, "IRQ thread exiting with code %d\n", ret);
>
> Â Â Â Â return ret;
> Â }
> diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
> index d63f453..4add419 100644
> --- a/drivers/mmc/host/at91_mci.c
> +++ b/drivers/mmc/host/at91_mci.c
> @@ -881,8 +881,8 @@ static irqreturn_t at91_mmc_det_irq(int irq, void *_host)
> Â Â Â Â */
> Â Â Â Â if (present != host->present) {
> Â Â Â Â Â Â Â Â host->present = present;
> - Â Â Â Â Â Â Â pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â present ? "insert" : "remove");
> + Â Â Â Â Â Â Â mmc_host_debug(host->mmc, "card %s\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â present ? "insert" : "remove");
> Â Â Â Â Â Â Â Â if (!present) {
> Â Â Â Â Â Â Â Â Â Â Â Â pr_debug("****** Resetting SD-card bus width ******\n");
> Â Â Â Â Â Â Â Â Â Â Â Â at91_mci_write(host, AT91_MCI_SDCR, at91_mci_read(host, AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
> @@ -910,8 +910,9 @@ static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable)
> Â {
> Â Â Â Â struct at91mci_host *host = mmc_priv(mmc);
>
> - Â Â Â pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â host->board->slot_b ? 'B':'A', enable ? "enable" : "disable");
> + Â Â Â mmc_host_debug(host->mmc, "sdio_irq %c : %s\n",
> + Â Â Â Â Â Â Â Â Â Â Â host->board->slot_b ? 'B' : 'A',
> + Â Â Â Â Â Â Â Â Â Â Â enable ? "enable" : "disable");
> Â Â Â Â at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR,
> Â Â Â Â Â Â Â Â host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA);
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 5d34c01..b4efd3c 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1712,7 +1712,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>
> Â Â Â Â host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
> Â Â Â Â if (IS_ERR(host->vmmc)) {
> - Â Â Â Â Â Â Â pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
> + Â Â Â Â Â Â Â mmc_host_info(mmc, "no vmmc regulator found\n");
> Â Â Â Â Â Â Â Â host->vmmc = NULL;
> Â Â Â Â } else
> Â Â Â Â Â Â Â Â regulator_enable(host->vmmc);
> diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
> index 80d8eb1..e0b49ec 100644
> --- a/drivers/mmc/host/msm_sdcc.c
> +++ b/drivers/mmc/host/msm_sdcc.c
> @@ -141,16 +141,15 @@ static void msmsdcc_reset_and_restore(struct msmsdcc_host *host)
> Â Â Â Â /* Reset the controller */
> Â Â Â Â ret = clk_reset(host->clk, CLK_RESET_ASSERT);
> Â Â Â Â if (ret)
> - Â Â Â Â Â Â Â pr_err("%s: Clock assert failed at %u Hz with err %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), host->clk_rate, ret);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Clock assert failed at %u Hz with err %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->clk_rate, ret);
>
> Â Â Â Â ret = clk_reset(host->clk, CLK_RESET_DEASSERT);
> Â Â Â Â if (ret)
> - Â Â Â Â Â Â Â pr_err("%s: Clock deassert failed at %u Hz with err %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), host->clk_rate, ret);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Clock deassert failed at %u Hz with err %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->clk_rate, ret);
>
> - Â Â Â pr_info("%s: Controller has been re-initialiazed\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â mmc_host_info(host->mmc, "Controller has been re-initialized\n");
>
> Â Â Â Â /* Restore the contoller state */
> Â Â Â Â writel(host->pwr, host->base + MMCIPOWER);
> @@ -158,8 +157,8 @@ static void msmsdcc_reset_and_restore(struct msmsdcc_host *host)
> Â Â Â Â writel(mci_mask0, host->base + MMCIMASK0);
> Â Â Â Â ret = clk_set_rate(host->clk, host->clk_rate);
> Â Â Â Â if (ret)
> - Â Â Â Â Â Â Â pr_err("%s: Failed to set clk rate %u Hz (%d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), host->clk_rate, ret);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Failed to set clk rate %u Hz (%d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->clk_rate, ret);
> Â }
>
> Â static void
> @@ -251,11 +250,11 @@ msmsdcc_dma_complete_tlet(unsigned long data)
> Â Â Â Â } else {
>         /* Error or flush  */
> Â Â Â Â Â Â Â Â if (host->dma.result & DMOV_RSLT_ERROR)
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: DMA error (0x%.8x)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), host->dma.result);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "DMA error (0x%.8x)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->dma.result);
> Â Â Â Â Â Â Â Â if (host->dma.result & DMOV_RSLT_FLUSH)
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: DMA channel flushed (0x%.8x)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), host->dma.result);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "DMA channel flushed (0x%.8x)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->dma.result);
>
> Â Â Â Â Â Â Â Â pr_err("Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n",
> Â Â Â Â Â Â Â Â Â Â Â err.flush[0], err.flush[1], err.flush[2],
> @@ -389,8 +388,7 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data)
> Â Â Â Â n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg,
> Â Â Â Â Â Â Â Â Â Â Â Â host->dma.num_ents, host->dma.dir);
> Â Â Â Â if (n == 0) {
> - Â Â Â Â Â Â Â pr_err("%s: Unable to map in all sg elements\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Unable to map in all sg elements\n");
> Â Â Â Â Â Â Â Â host->dma.sg = NULL;
> Â Â Â Â Â Â Â Â host->dma.num_ents = 0;
> Â Â Â Â Â Â Â Â return -ENOMEM;
> @@ -475,8 +473,7 @@ msmsdcc_start_command_deferred(struct msmsdcc_host *host,
> Â Â Â Â Â Â Â Â *c |= MCI_CSPM_MCIABORT;
>
> Â Â Â Â if (host->curr.cmd != NULL) {
> - Â Â Â Â Â Â Â pr_err("%s: Overlapping command requests\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Overlapping command requests\n");
> Â Â Â Â }
> Â Â Â Â host->curr.cmd = cmd;
> Â }
> @@ -573,24 +570,23 @@ msmsdcc_data_err(struct msmsdcc_host *host, struct mmc_data *data,
> Â Â Â Â Â Â Â Â unsigned int status)
> Â {
> Â Â Â Â if (status & MCI_DATACRCFAIL) {
> - Â Â Â Â Â Â Â pr_err("%s: Data CRC error\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Data CRC error\n");
> Â Â Â Â Â Â Â Â pr_err("%s: opcode 0x%.8x\n", __func__,
> Â Â Â Â Â Â Â Â Â Â Â data->mrq->cmd->opcode);
> Â Â Â Â Â Â Â Â pr_err("%s: blksz %d, blocks %d\n", __func__,
> Â Â Â Â Â Â Â Â Â Â Â data->blksz, data->blocks);
> Â Â Â Â Â Â Â Â data->error = -EILSEQ;
> Â Â Â Â } else if (status & MCI_DATATIMEOUT) {
> - Â Â Â Â Â Â Â pr_err("%s: Data timeout\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Data timeout\n");
> Â Â Â Â Â Â Â Â data->error = -ETIMEDOUT;
> Â Â Â Â } else if (status & MCI_RXOVERRUN) {
> - Â Â Â Â Â Â Â pr_err("%s: RX overrun\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "RX overrun\n");
> Â Â Â Â Â Â Â Â data->error = -EIO;
> Â Â Â Â } else if (status & MCI_TXUNDERRUN) {
> - Â Â Â Â Â Â Â pr_err("%s: TX underrun\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "TX underrun\n");
> Â Â Â Â Â Â Â Â data->error = -EIO;
> Â Â Â Â } else {
> - Â Â Â Â Â Â Â pr_err("%s: Unknown error (0x%.8x)\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), status);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Unknown error (0x%.8x)\n", status);
> Â Â Â Â Â Â Â Â data->error = -EIO;
> Â Â Â Â }
> Â }
> @@ -751,7 +747,7 @@ static void msmsdcc_do_cmdirq(struct msmsdcc_host *host, uint32_t status)
> Â Â Â Â Â Â Â Â cmd->error = -ETIMEDOUT;
> Â Â Â Â } else if (status & MCI_CMDCRCFAIL &&
> Â Â Â Â Â Â Â Â Â cmd->flags & MMC_RSP_CRC) {
> - Â Â Â Â Â Â Â pr_err("%s: Command CRC error\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Command CRC error\n");
> Â Â Â Â Â Â Â Â cmd->error = -EILSEQ;
> Â Â Â Â }
>
> @@ -960,10 +956,9 @@ static void msmsdcc_setup_gpio(struct msmsdcc_host *host, bool enable)
> Â Â Â Â Â Â Â Â Â Â Â Â rc = gpio_request(curr->gpio[i].no,
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â curr->gpio[i].name);
> Â Â Â Â Â Â Â Â Â Â Â Â if (rc) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: gpio_request(%d, %s) failed %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â curr->gpio[i].no,
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â curr->gpio[i].name, rc);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "gpio_request(%d, %s) failed %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â curr->gpio[i].no,
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â curr->gpio[i].name, rc);
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â goto free_gpios;
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â } else {
> @@ -996,8 +991,8 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> Â Â Â Â Â Â Â Â if (ios->clock != host->clk_rate) {
> Â Â Â Â Â Â Â Â Â Â Â Â rc = clk_set_rate(host->clk, ios->clock);
> Â Â Â Â Â Â Â Â Â Â Â Â if (rc < 0)
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Error setting clock rate (%d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), rc);
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Error setting clock rate (%d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â rc);
> Â Â Â Â Â Â Â Â Â Â Â Â else
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->clk_rate = ios->clock;
> Â Â Â Â Â Â Â Â }
> @@ -1093,8 +1088,8 @@ msmsdcc_check_status(unsigned long data)
> Â Â Â Â status = host->plat->status(mmc_dev(host->mmc));
> Â Â Â Â host->eject = !status;
> Â Â Â Â if (status ^ host->oldstat) {
> - Â Â Â Â Â Â Â pr_info("%s: Slot status change detected (%d -> %d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), host->oldstat, status);
> + Â Â Â Â Â Â Â mmc_host_info(host->mmc, "Slot status change detected (%d -> %d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->oldstat, status);
> Â Â Â Â Â Â Â Â if (status)
> Â Â Â Â Â Â Â Â Â Â Â Â mmc_detect_change(host->mmc, (5 * HZ) / 2);
> Â Â Â Â Â Â Â Â else
> @@ -1123,8 +1118,7 @@ msmsdcc_status_notify_cb(int card_present, void *dev_id)
> Â {
> Â Â Â Â struct msmsdcc_host *host = dev_id;
>
> - Â Â Â pr_debug("%s: card_present %d\n", mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â card_present);
> + Â Â Â mmc_host_debug(host->mmc, "card_present %d\n", card_present);
> Â Â Â Â msmsdcc_check_status((unsigned long) host);
> Â }
>
> @@ -1321,15 +1315,14 @@ msmsdcc_probe(struct platform_device *pdev)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â DRIVER_NAME " (slot)",
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host);
> Â Â Â Â Â Â Â Â if (ret) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Unable to get slot IRQ %d (%d)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc), host->stat_irq, ret);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(mmc, "Unable to get slot IRQ %d (%d)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->stat_irq, ret);
> Â Â Â Â Â Â Â Â Â Â Â Â goto clk_disable;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } else if (plat->register_status_notify) {
> Â Â Â Â Â Â Â Â plat->register_status_notify(msmsdcc_status_notify_cb, host);
> Â Â Â Â } else if (!plat->status)
> - Â Â Â Â Â Â Â pr_err("%s: No card detect facilities available\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> + Â Â Â Â Â Â Â mmc_host_err(mmc, "No card detect facilities available\n");
> Â Â Â Â else {
> Â Â Â Â Â Â Â Â init_timer(&host->timer);
> Â Â Â Â Â Â Â Â host->timer.data = (unsigned long)host;
> @@ -1356,28 +1349,26 @@ msmsdcc_probe(struct platform_device *pdev)
> Â Â Â Â mmc_set_drvdata(pdev, mmc);
> Â Â Â Â mmc_add_host(mmc);
>
> - Â Â Â pr_info("%s: Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
> - Â Â Â Â Â Â Â mmc_hostname(mmc), (unsigned long long)memres->start,
> - Â Â Â Â Â Â Â (unsigned int) cmd_irqres->start,
> - Â Â Â Â Â Â Â (unsigned int) host->stat_irq, host->dma.channel);
> - Â Â Â pr_info("%s: 4 bit data mode %s\n", mmc_hostname(mmc),
> - Â Â Â Â Â Â Â (mmc->caps & MMC_CAP_4_BIT_DATA ? "enabled" : "disabled"));
> - Â Â Â pr_info("%s: MMC clock %u -> %u Hz, PCLK %u Hz\n",
> - Â Â Â Â Â Â Â mmc_hostname(mmc), msmsdcc_fmin, msmsdcc_fmax, host->pclk_rate);
> - Â Â Â pr_info("%s: Slot eject status = %d\n", mmc_hostname(mmc), host->eject);
> - Â Â Â pr_info("%s: Power save feature enable = %d\n",
> - Â Â Â Â Â Â Â mmc_hostname(mmc), msmsdcc_pwrsave);
> + Â Â Â mmc_host_info(mmc, "Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
> + Â Â Â Â Â Â Â Â Â Â (unsigned long long)memres->start,
> + Â Â Â Â Â Â Â Â Â Â (unsigned int) cmd_irqres->start,
> + Â Â Â Â Â Â Â Â Â Â (unsigned int) host->stat_irq, host->dma.channel);
> + Â Â Â mmc_host_info(mmc, "4 bit data mode %s\n",
> + Â Â Â Â Â Â Â Â Â Â mmc->caps & MMC_CAP_4_BIT_DATA ? "enabled" : "disabled");
> + Â Â Â mmc_host_info(mmc, "MMC clock %u -> %u Hz, PCLK %u Hz\n",
> + Â Â Â Â Â Â Â Â Â Â msmsdcc_fmin, msmsdcc_fmax, host->pclk_rate);
> + Â Â Â mmc_host_info(mmc, "Slot eject status = %d\n", host->eject);
> + Â Â Â mmc_host_info(mmc, "Power save feature enable = %d\n", msmsdcc_pwrsave);
>
> Â Â Â Â if (host->dma.channel != -1) {
> - Â Â Â Â Â Â Â pr_info("%s: DM non-cached buffer at %p, dma_addr 0x%.8x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc), host->dma.nc, host->dma.nc_busaddr);
> - Â Â Â Â Â Â Â pr_info("%s: DM cmd busaddr 0x%.8x, cmdptr busaddr 0x%.8x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc), host->dma.cmd_busaddr,
> - Â Â Â Â Â Â Â Â Â Â Â host->dma.cmdptr_busaddr);
> + Â Â Â Â Â Â Â mmc_host_info(mmc, "DM non-cached buffer at %p, dma_addr 0x%.8x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->dma.nc, host->dma.nc_busaddr);
> + Â Â Â Â Â Â Â mmc_host_info(mmc, "DM cmd busaddr 0x%.8x, cmdptr busaddr 0x%.8x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->dma.cmd_busaddr, host->dma.cmdptr_busaddr);
> Â Â Â Â } else
> - Â Â Â Â Â Â Â pr_info("%s: PIO transfer enabled\n", mmc_hostname(mmc));
> + Â Â Â Â Â Â Â mmc_host_info(mmc, "PIO transfer enabled\n");
> Â Â Â Â if (host->timer.function)
> - Â Â Â Â Â Â Â pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc));
> + Â Â Â Â Â Â Â mmc_host_info(mmc, "Polling status mode enabled\n");
>
> Â Â Â Â return 0;
> Â cmd_irq_free:
> diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
> index 93012a0..7928e2e 100644
> --- a/drivers/mmc/host/mvsdio.c
> +++ b/drivers/mmc/host/mvsdio.c
> @@ -117,9 +117,8 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
> Â Â Â Â Â Â Â Â host->pio_size = data->blocks * data->blksz;
> Â Â Â Â Â Â Â Â host->pio_ptr = sg_virt(data->sg);
> Â Â Â Â Â Â Â Â if (!nodma)
> - Â Â Â Â Â Â Â Â Â Â Â pr_debug("%s: fallback to PIO for data at 0x%p size %d\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio_ptr, host->pio_size);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_debug(host->mmc, "fallback to PIO for data at 0x%p size %d\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->pio_ptr, host->pio_size);
> Â Â Â Â Â Â Â Â return 1;
> Â Â Â Â } else {
> Â Â Â Â Â Â Â Â dma_addr_t phys_addr;
> @@ -470,8 +469,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
> Â Â Â Â Â Â Â Â if (mrq->data)
> Â Â Â Â Â Â Â Â Â Â Â Â err_status = mvsd_finish_data(host, mrq->data, err_status);
> Â Â Â Â Â Â Â Â if (err_status) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: unhandled error status %#04x\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), err_status);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "unhandled error status %#04x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â err_status);
> Â Â Â Â Â Â Â Â Â Â Â Â cmd->error = -ENOMSG;
> Â Â Â Â Â Â Â Â }
>
> @@ -488,9 +487,8 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
> Â Â Â Â if (irq_handled)
> Â Â Â Â Â Â Â Â return IRQ_HANDLED;
>
> - Â Â Â pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
> - Â Â Â Â Â Â Â mmc_hostname(host->mmc), intr_status,
> - Â Â Â Â Â Â Â host->intr_en, host->pio_size);
> + Â Â Â mmc_host_err(host->mmc, "unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
> + Â Â Â Â Â Â Â Â Â Â intr_status, host->intr_en, host->pio_size);
> Â Â Â Â return IRQ_NONE;
> Â }
>
> @@ -504,13 +502,11 @@ static void mvsd_timeout_timer(unsigned long data)
> Â Â Â Â spin_lock_irqsave(&host->lock, flags);
> Â Â Â Â mrq = host->mrq;
> Â Â Â Â if (mrq) {
> - Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware interrupt\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> - Â Â Â Â Â Â Â pr_err("%s: hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_HW_STATE),
> - Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_NOR_INTR_STATUS),
> - Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_NOR_INTR_EN));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Timeout waiting for hardware interrupt\n");
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_HW_STATE),
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_NOR_INTR_STATUS),
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â mvsd_read(MVSD_NOR_INTR_EN));
>
> Â Â Â Â Â Â Â Â host->mrq = NULL;
>
> @@ -801,13 +797,12 @@ static int __init mvsd_probe(struct platform_device *pdev)
> Â Â Â Â if (ret)
> Â Â Â Â Â Â Â Â goto out;
>
> - Â Â Â pr_notice("%s: %s driver initialized, ",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc), DRIVER_NAME);
> + Â Â Â mmc_host_notice(mmc, "%s driver initialized, ", DRIVER_NAME);
> Â Â Â Â if (host->gpio_card_detect)
> - Â Â Â Â Â Â Â printk("using GPIO %d for card detection\n",
> - Â Â Â Â Â Â Â Â Â Â Â host->gpio_card_detect);
> + Â Â Â Â Â Â Â pr_cont("using GPIO %d for card detection\n",
> + Â Â Â Â Â Â Â Â Â Â Â host->gpio_card_detect);
> Â Â Â Â else
> - Â Â Â Â Â Â Â printk("lacking card detect (fall back to polling)\n");
> + Â Â Â Â Â Â Â pr_cont("lacking card detect (fall back to polling)\n");
> Â Â Â Â return 0;
>
> Â out:
> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> index dd5159b..35bddef 100644
> --- a/drivers/mmc/host/omap_hsmmc.c
> +++ b/drivers/mmc/host/omap_hsmmc.c
> @@ -1264,15 +1264,12 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
> Â Â Â Â host->reqs_blocked = 0;
> Â Â Â Â if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
> Â Â Â Â Â Â Â Â if (host->protect_card) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: cover is closed, card is now accessible\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(host->mmc, "cover is closed, card is now accessible\n");
> Â Â Â Â Â Â Â Â Â Â Â Â host->protect_card = 0;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â } else {
> Â Â Â Â Â Â Â Â if (!host->protect_card) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_info("%s: cover is open, "
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â "card is now inaccessible\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_info(host->mmc, "cover is open, card is now inaccessible\n");
> Â Â Â Â Â Â Â Â Â Â Â Â host->protect_card = 1;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
> index fc4356e..f8c6df2 100644
> --- a/drivers/mmc/host/pxamci.c
> +++ b/drivers/mmc/host/pxamci.c
> @@ -558,8 +558,8 @@ static void pxamci_dma_irq(int dma, void *devid)
> Â Â Â Â if (dcsr & DCSR_ENDINTR) {
> Â Â Â Â Â Â Â Â writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
> Â Â Â Â } else {
> - Â Â Â Â Â Â Â pr_err("%s: DMA error on channel %d (DCSR=%#x)\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), dma, dcsr);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "DMA error on channel %d (DCSR=%#x)\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â dma, dcsr);
> Â Â Â Â Â Â Â Â host->data->error = -EIO;
> Â Â Â Â Â Â Â Â pxamci_data_done(host, 0);
> Â Â Â Â }
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index d31c31d..3fcf79d 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -202,8 +202,8 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
> Â Â Â Â /* hw clears the bit when it's done */
> Â Â Â Â while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
> Â Â Â Â Â Â Â Â if (timeout == 0) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Reset 0x%x never completed.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), (int)mask);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Reset 0x%x never completed\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â (int)mask);
> Â Â Â Â Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
> Â Â Â Â Â Â Â Â Â Â Â Â return;
> Â Â Â Â Â Â Â Â }
> @@ -679,8 +679,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> Â Â Â Â }
>
> Â Â Â Â if (count >= 0xF) {
> - Â Â Â Â Â Â Â pr_warn("%s: Too large timeout requested for CMD%d!\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), cmd->opcode);
> + Â Â Â Â Â Â Â mmc_host_warn(host->mmc, "Too large timeout requested for CMD%d!\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â cmd->opcode);
> Â Â Â Â Â Â Â Â count = 0xE;
> Â Â Â Â }
>
> @@ -972,8 +972,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
>
> Â Â Â Â while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
> Â Â Â Â Â Â Â Â if (timeout == 0) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Controller never released inhibit bit(s)\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Controller never released inhibit bit(s)\n");
> Â Â Â Â Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
> Â Â Â Â Â Â Â Â Â Â Â Â cmd->error = -EIO;
> Â Â Â Â Â Â Â Â Â Â Â Â tasklet_schedule(&host->finish_tasklet);
> @@ -994,8 +993,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> Â Â Â Â sdhci_set_transfer_mode(host, cmd);
>
> Â Â Â Â if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
> - Â Â Â Â Â Â Â pr_err("%s: Unsupported response type!\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Unsupported response type!\n");
> Â Â Â Â Â Â Â Â cmd->error = -EINVAL;
> Â Â Â Â Â Â Â Â tasklet_schedule(&host->finish_tasklet);
> Â Â Â Â Â Â Â Â return;
> @@ -1154,8 +1152,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> Â Â Â Â while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> Â Â Â Â Â Â Â Â & SDHCI_CLOCK_INT_STABLE)) {
> Â Â Â Â Â Â Â Â if (timeout == 0) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Internal clock never stabilised\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Internal clock never stabilised\n");
> Â Â Â Â Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
> Â Â Â Â Â Â Â Â Â Â Â Â return;
> Â Â Â Â Â Â Â Â }
> @@ -1912,10 +1909,8 @@ static void sdhci_tasklet_card(unsigned long param)
> Â Â Â Â /* Check host->mrq first in case we are runtime suspended */
> Â Â Â Â if (host->mrq &&
> Â Â Â Â Â Â !(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
> - Â Â Â Â Â Â Â pr_err("%s: Card removed during transfer!\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> - Â Â Â Â Â Â Â pr_err("%s: Resetting controller.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Card removed during transfer!\n");
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Resetting controller.\n");
>
> Â Â Â Â Â Â Â Â sdhci_reset(host, SDHCI_RESET_CMD);
> Â Â Â Â Â Â Â Â sdhci_reset(host, SDHCI_RESET_DATA);
> @@ -2003,8 +1998,7 @@ static void sdhci_timeout_timer(unsigned long data)
> Â Â Â Â spin_lock_irqsave(&host->lock, flags);
>
> Â Â Â Â if (host->mrq) {
> - Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware interrupt\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Timeout waiting for hardware interrupt\n");
> Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
>
> Â Â Â Â Â Â Â Â if (host->data) {
> @@ -2049,8 +2043,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
> Â Â Â Â BUG_ON(intmask == 0);
>
> Â Â Â Â if (!host->cmd) {
> - Â Â Â Â Â Â Â pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), (unsigned)intmask);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Got command interrupt 0x%08x even though no command operation was in progress\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned)intmask);
> Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
> Â Â Â Â Â Â Â Â return;
> Â Â Â Â }
> @@ -2147,8 +2141,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> Â Â Â Â Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â }
>
> - Â Â Â Â Â Â Â pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), (unsigned)intmask);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Got data interrupt 0x%08x even though no data operation was in progress\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â (unsigned)intmask);
> Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
>
> Â Â Â Â Â Â Â Â return;
> @@ -2163,7 +2157,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
> Â Â Â Â Â Â Â Â Â Â Â Â != MMC_BUS_TEST_R)
> Â Â Â Â Â Â Â Â host->data->error = -EILSEQ;
> Â Â Â Â else if (intmask & SDHCI_INT_ADMA_ERROR) {
> - Â Â Â Â Â Â Â pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "ADMA error\n");
> Â Â Â Â Â Â Â Â sdhci_show_adma_error(host);
> Â Â Â Â Â Â Â Â host->data->error = -EIO;
> Â Â Â Â }
> @@ -2226,8 +2220,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
>
> Â Â Â Â if (host->runtime_suspended) {
> Â Â Â Â Â Â Â Â spin_unlock(&host->lock);
> - Â Â Â Â Â Â Â pr_warn("%s: got irq while runtime suspended\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_warn(host->mmc, "got irq while runtime suspended\n");
> Â Â Â Â Â Â Â Â return IRQ_HANDLED;
> Â Â Â Â }
>
> @@ -2283,8 +2276,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
> Â Â Â Â intmask &= ~SDHCI_INT_ERROR;
>
> Â Â Â Â if (intmask & SDHCI_INT_BUS_POWER) {
> - Â Â Â Â Â Â Â pr_err("%s: Card is consuming too much power!\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Card is consuming too much power!\n");
> Â Â Â Â Â Â Â Â sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
> Â Â Â Â }
>
> @@ -2296,8 +2288,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
> Â Â Â Â intmask &= ~SDHCI_INT_CARD_INT;
>
> Â Â Â Â if (intmask) {
> - Â Â Â Â Â Â Â pr_err("%s: Unexpected interrupt 0x%08x.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), intmask);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Unexpected interrupt 0x%08x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â intmask);
> Â Â Â Â Â Â Â Â sdhci_dumpregs(host);
>
> Â Â Â Â Â Â Â Â sdhci_writel(host, intmask, SDHCI_INT_STATUS);
> @@ -2537,8 +2529,8 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â host->version = (host->version & SDHCI_SPEC_VER_MASK)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â >> SDHCI_SPEC_VER_SHIFT;
> Â Â Â Â if (host->version > SDHCI_SPEC_300) {
> - Â Â Â Â Â Â Â pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc), host->version);
> + Â Â Â Â Â Â Â mmc_host_err(mmc, "Unknown controller version (%d). You may experience problems.\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->version);
> Â Â Â Â }
>
> Â Â Â Â caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
> @@ -2573,8 +2565,7 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
> Â Â Â Â Â Â Â Â if (host->ops->enable_dma) {
> Â Â Â Â Â Â Â Â Â Â Â Â if (host->ops->enable_dma(host)) {
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: No suitable DMA available. Falling back to PIO.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(mmc, "No suitable DMA available. Falling back to PIO.\n");
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â host->flags &=
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
> Â Â Â Â Â Â Â Â Â Â Â Â }
> @@ -2592,8 +2583,7 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â Â Â Â Â if (!host->adma_desc || !host->align_buffer) {
> Â Â Â Â Â Â Â Â Â Â Â Â kfree(host->adma_desc);
> Â Â Â Â Â Â Â Â Â Â Â Â kfree(host->align_buffer);
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: Unable to allocate ADMA buffers. Falling back to standard DMA.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(mmc, "Unable to allocate ADMA buffers. Falling back to standard DMA.\n");
> Â Â Â Â Â Â Â Â Â Â Â Â host->flags &= ~SDHCI_USE_ADMA;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -2619,8 +2609,7 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â if (host->max_clk == 0 || host->quirks &
> Â Â Â Â Â Â Â Â Â Â Â Â SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
> Â Â Â Â Â Â Â Â if (!host->ops->get_max_clock) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't specify base clock frequency\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(mmc, "Hardware doesn't specify base clock frequency\n");
> Â Â Â Â Â Â Â Â Â Â Â Â return -ENODEV;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â Â Â Â Â host->max_clk = host->ops->get_max_clock(host);
> @@ -2665,8 +2654,7 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â Â Â Â Â Â Â Â Â host->timeout_clk = host->ops->get_timeout_clock(host);
> Â Â Â Â Â Â Â Â } else if (!(host->quirks &
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't specify timeout clock frequency\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(mmc, "Hardware doesn't specify timeout clock frequency\n");
> Â Â Â Â Â Â Â Â Â Â Â Â return -ENODEV;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -2833,8 +2821,7 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â Â Â Â Â mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
>
> Â Â Â Â if (mmc->ocr_avail == 0) {
> - Â Â Â Â Â Â Â pr_err("%s: Hardware doesn't report any support voltages\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> + Â Â Â Â Â Â Â mmc_host_err(mmc, "Hardware doesn't report any support voltages\n");
> Â Â Â Â Â Â Â Â return -ENODEV;
> Â Â Â Â }
>
> @@ -2881,8 +2868,7 @@ int sdhci_add_host(struct sdhci_host *host)
> Â Â Â Â Â Â Â Â mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â SDHCI_MAX_BLOCK_SHIFT;
> Â Â Â Â Â Â Â Â if (mmc->max_blk_size >= 3) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(mmc, "Invalid maximum block size, assuming 512 bytes\n");
> Â Â Â Â Â Â Â Â Â Â Â Â mmc->max_blk_size = 0;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> @@ -2920,7 +2906,7 @@ int sdhci_add_host(struct sdhci_host *host)
>
> Â Â Â Â host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
> Â Â Â Â if (IS_ERR(host->vmmc)) {
> - Â Â Â Â Â Â Â pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
> + Â Â Â Â Â Â Â mmc_host_info(mmc, "no vmmc regulator found\n");
> Â Â Â Â Â Â Â Â host->vmmc = NULL;
> Â Â Â Â } else {
> Â Â Â Â Â Â Â Â regulator_enable(host->vmmc);
> @@ -2949,10 +2935,10 @@ int sdhci_add_host(struct sdhci_host *host)
>
> Â Â Â Â mmc_add_host(mmc);
>
> - Â Â Â pr_info("%s: SDHCI controller on %s [%s] using %s\n",
> - Â Â Â Â Â Â Â mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
> - Â Â Â Â Â Â Â (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
> - Â Â Â Â Â Â Â (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
> + Â Â Â mmc_host_info(mmc, "SDHCI controller on %s [%s] using %s\n",
> + Â Â Â Â Â Â Â Â Â Â host->hw_name, dev_name(mmc_dev(mmc)),
> + Â Â Â Â Â Â Â Â Â Â (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
> + Â Â Â Â Â Â Â Â Â Â (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
>
> Â Â Â Â sdhci_enable_card_detection(host);
>
> @@ -2982,8 +2968,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
> Â Â Â Â Â Â Â Â host->flags |= SDHCI_DEVICE_DEAD;
>
> Â Â Â Â Â Â Â Â if (host->mrq) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Controller removed during transfer!\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Controller removed during transfer!\n");
>
> Â Â Â Â Â Â Â Â Â Â Â Â host->mrq->cmd->error = -ENOMEDIUM;
> Â Â Â Â Â Â Â Â Â Â Â Â tasklet_schedule(&host->finish_tasklet);
> diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
> index a4ea102..cfd45cb 100644
> --- a/drivers/mmc/host/tmio_mmc.c
> +++ b/drivers/mmc/host/tmio_mmc.c
> @@ -93,8 +93,8 @@ static int __devinit tmio_mmc_probe(struct platform_device *pdev)
> Â Â Â Â if (ret)
> Â Â Â Â Â Â Â Â goto host_remove;
>
> - Â Â Â pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
> - Â Â Â Â Â Â Â (unsigned long)host->ctl, irq);
> + Â Â Â mmc_host_info(host->mmc, "at 0x%08lx irq %d\n",
> + Â Â Â Â Â Â Â Â Â Â (unsigned long)host->ctl, irq);
>
> Â Â Â Â return 0;
>
> diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
> index d85a60c..ad680d7 100644
> --- a/drivers/mmc/host/tmio_mmc_pio.c
> +++ b/drivers/mmc/host/tmio_mmc_pio.c
> @@ -681,8 +681,8 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
> Â Â Â Â Â Â Â Â int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES;
>
> Â Â Â Â Â Â Â Â if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: %d byte block unsupported in 4 bit mode\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), data->blksz);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "%d byte block unsupported in 4 bit mode\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â data->blksz);
> Â Â Â Â Â Â Â Â Â Â Â Â return -EINVAL;
> Â Â Â Â Â Â Â Â }
> Â Â Â Â }
> diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
> index dc479b0..a673161 100644
> --- a/drivers/mmc/host/via-sdmmc.c
> +++ b/drivers/mmc/host/via-sdmmc.c
> @@ -585,7 +585,7 @@ static void via_sdc_send_command(struct via_crdr_mmc_host *host,
> Â Â Â Â Â Â Â Â cmdctrl |= VIA_CRDR_SDCTRL_RSP_R3;
> Â Â Â Â Â Â Â Â break;
> Â Â Â Â default:
> - Â Â Â Â Â Â Â pr_err("%s: cmd->flag is not valid\n", mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "cmd->flag is not valid\n");
> Â Â Â Â Â Â Â Â break;
> Â Â Â Â }
>
> @@ -840,8 +840,8 @@ static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
> Â Â Â Â BUG_ON(intmask == 0);
>
> Â Â Â Â if (!host->cmd) {
> - Â Â Â Â Â Â Â pr_err("%s: Got command interrupt 0x%x even though no command operation was in progress\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), intmask);
> + Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Got command interrupt 0x%x even though no command operation was in progress\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â intmask);
> Â Â Â Â Â Â Â Â return;
> Â Â Â Â }
>
> @@ -918,8 +918,8 @@ static irqreturn_t via_sdc_isr(int irq, void *dev_id)
>
> Â Â Â Â sd_status &= ~(VIA_CRDR_SDSTS_CMD_MASK | VIA_CRDR_SDSTS_DATA_MASK);
> Â Â Â Â if (sd_status) {
> - Â Â Â Â Â Â Â pr_err("%s: Unexpected interrupt 0x%x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(sdhost->mmc), sd_status);
> + Â Â Â Â Â Â Â mmc_host_err(sdhost->mmc, "Unexpected interrupt 0x%x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â sd_status);
> Â Â Â Â Â Â Â Â writew(sd_status, addrbase + VIA_CRDR_SDSTATUS);
> Â Â Â Â }
>
> @@ -942,9 +942,8 @@ static void via_sdc_timeout(unsigned long ulongdata)
> Â Â Â Â spin_lock_irqsave(&sdhost->lock, flags);
>
> Â Â Â Â if (sdhost->mrq) {
> - Â Â Â Â Â Â Â pr_err("%s: Timeout waiting for hardware interrupt.cmd:0x%x\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(sdhost->mmc),
> - Â Â Â Â Â Â Â Â Â Â Â sdhost->mrq->cmd->opcode);
> + Â Â Â Â Â Â Â mmc_host_err(sdhost->mmc, "Timeout waiting for hardware interrupt.cmd:0x%x\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â sdhost->mrq->cmd->opcode);
>
> Â Â Â Â Â Â Â Â if (sdhost->data) {
> Â Â Â Â Â Â Â Â Â Â Â Â writel(VIA_CRDR_DMACTRL_SFTRST,
> @@ -1006,8 +1005,7 @@ static void via_sdc_card_detect(struct work_struct *work)
> Â Â Â Â status = readw(addrbase + VIA_CRDR_SDSTATUS);
> Â Â Â Â if (!(status & VIA_CRDR_SDSTS_SLOTG)) {
> Â Â Â Â Â Â Â Â if (host->mrq) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Card removed during transfer!\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Card removed during transfer!\n");
> Â Â Â Â Â Â Â Â Â Â Â Â host->mrq->cmd->error = -ENOMEDIUM;
> Â Â Â Â Â Â Â Â Â Â Â Â tasklet_schedule(&host->finish_tasklet);
> Â Â Â Â Â Â Â Â }
> @@ -1192,8 +1190,7 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
> Â Â Â Â mmiowb();
>
> Â Â Â Â if (sdhost->mrq) {
> - Â Â Â Â Â Â Â pr_err("%s: Controller removed during transfer\n",
> - Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(sdhost->mmc));
> + Â Â Â Â Â Â Â mmc_host_err(sdhost->mmc, "Controller removed during transfer\n");
>
> Â Â Â Â Â Â Â Â /* make sure all DMA is stopped */
> Â Â Â Â Â Â Â Â writel(VIA_CRDR_DMACTRL_SFTRST,
> diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
> index 7536b50..ae474a4 100644
> --- a/drivers/mmc/host/wbsd.c
> +++ b/drivers/mmc/host/wbsd.c
> @@ -194,7 +194,7 @@ static void wbsd_reset(struct wbsd_host *host)
> Â {
> Â Â Â Â u8 setup;
>
> - Â Â Â pr_err("%s: Resetting chip\n", mmc_hostname(host->mmc));
> + Â Â Â mmc_host_err(host->mmc, "Resetting chip\n");
>
> Â Â Â Â /*
> Â Â Â Â * Soft reset of chip (SD/MMC part).
> @@ -721,8 +721,8 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
> Â Â Â Â Â Â Â Â * Any leftover data?
> Â Â Â Â Â Â Â Â */
> Â Â Â Â Â Â Â Â if (count) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Incomplete DMA transfer. %d bytes left.\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), count);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Incomplete DMA transfer. %d bytes left.\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â count);
>
> Â Â Â Â Â Â Â Â Â Â Â Â if (!data->error)
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â data->error = -EIO;
> @@ -802,8 +802,8 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
>
> Â Â Â Â Â Â Â Â default:
> Â #ifdef CONFIG_MMC_DEBUG
> - Â Â Â Â Â Â Â Â Â Â Â pr_warn("%s: Data command %d is not supported by this controller\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc), cmd->opcode);
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_warn(host->mmc, "Data command %d is not supported by this controller\n",
> + Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â cmd->opcode);
> Â #endif
> Â Â Â Â Â Â Â Â Â Â Â Â cmd->error = -EINVAL;
>
> @@ -1027,8 +1027,7 @@ static void wbsd_tasklet_card(unsigned long param)
> Â Â Â Â Â Â Â Â host->flags &= ~WBSD_FCARD_PRESENT;
>
> Â Â Â Â Â Â Â Â if (host->mrq) {
> - Â Â Â Â Â Â Â Â Â Â Â pr_err("%s: Card removed during transfer!\n",
> - Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â mmc_hostname(host->mmc));
> + Â Â Â Â Â Â Â Â Â Â Â mmc_host_err(host->mmc, "Card removed during transfer!\n");
> Â Â Â Â Â Â Â Â Â Â Â Â wbsd_reset(host);
>
> Â Â Â Â Â Â Â Â Â Â Â Â host->mrq->cmd->error = -ENOMEDIUM;
> @@ -1713,17 +1712,17 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
>
> Â Â Â Â mmc_add_host(mmc);
>
> - Â Â Â pr_info("%s: W83L51xD", mmc_hostname(mmc));
> + Â Â Â mmc_host_info(mmc, "W83L51xD");
> Â Â Â Â if (host->chip_id != 0)
> - Â Â Â Â Â Â Â printk(" id %x", (int)host->chip_id);
> - Â Â Â printk(" at 0x%x irq %d", (int)host->base, (int)host->irq);
> + Â Â Â Â Â Â Â pr_cont(" id %x", (int)host->chip_id);
> + Â Â Â pr_cont(" at 0x%x irq %d", (int)host->base, (int)host->irq);
> Â Â Â Â if (host->dma >= 0)
> - Â Â Â Â Â Â Â printk(" dma %d", (int)host->dma);
> + Â Â Â Â Â Â Â pr_cont(" dma %d", (int)host->dma);
> Â Â Â Â else
> - Â Â Â Â Â Â Â printk(" FIFO");
> + Â Â Â Â Â Â Â pr_cont(" FIFO");
> Â Â Â Â if (pnp)
> - Â Â Â Â Â Â Â printk(" PnP");
> - Â Â Â printk("\n");
> + Â Â Â Â Â Â Â pr_cont(" PnP");
> + Â Â Â pr_cont("\n");
>
> Â Â Â Â return 0;
> Â }
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 706f722..7483c7e 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -335,6 +335,17 @@ extern int mmc_add_host(struct mmc_host *);
> Â extern void mmc_remove_host(struct mmc_host *);
> Â extern void mmc_free_host(struct mmc_host *);
>
> +#define mmc_host_err(mmc, fmt, ...) Â Â Â Â Â Â Â Â Â Â Â Â Â Â \
> + Â Â Â pr_err("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
> +#define mmc_host_warn(mmc, fmt, ...) Â Â Â Â Â Â Â Â Â Â Â Â Â \
> + Â Â Â pr_warn("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
> +#define mmc_host_notice(mmc, fmt, ...) Â Â Â Â Â Â Â Â Â Â Â Â \
> + Â Â Â pr_notice("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
> +#define mmc_host_info(mmc, fmt, ...) Â Â Â Â Â Â Â Â Â Â Â Â Â \
> + Â Â Â pr_info("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
> +#define mmc_host_debug(mmc, fmt, ...) Â Â Â Â Â Â Â Â Â Â Â Â Â \
> + Â Â Â pr_debug("%s: " fmt, mmc_hostname(mmc), ##__VA_ARGS__)
> +
> Â static inline void *mmc_priv(struct mmc_host *host)
> Â {
> Â Â Â Â return (void *)host->private;
> --
> 1.7.6.405.gc1be0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: [PATCH 4/4] mmc: Add mmc_host_<level> logging
2011-11-16 0:52 ` NamJae Jeon
@ 2011-11-16 0:57 ` Joe Perches
2011-11-16 1:14 ` NamJae Jeon
0 siblings, 1 reply; 19+ messages in thread
From: Joe Perches @ 2011-11-16 0:57 UTC (permalink / raw)
To: NamJae Jeon
Cc: Nicolas Ferre, David Brown, Daniel Walker, Bryan Huntsman,
Nicolas Pitre, Chris Ball, Guennadi Liakhovetski, Ian Molton,
Bruce Chang, Harald Welte, Pierre Ossman, linux-mmc,
linux-kernel, linux-arm-kernel, linux-arm-msm, linux-omap
On Wed, 2011-11-16 at 09:52 +0900, NamJae Jeon wrote:
> 2011/11/16 Joe Perches <joe@perches.com>:
> > Centralize the pr_<level> uses of mmc_hostname into specific
> > mmc_host_<level> calls to allow a flexible presentation style
> > and shorten the code a bit.
> I don't know why pr_info should be surely replaced by mmc_host_info.
> if it is needed for only host name, I think that existing
> pr_info/err/debug is sufficient.
Please trim your replies and read the patch description.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 4/4] mmc: Add mmc_host_<level> logging
2011-11-16 0:57 ` Joe Perches
@ 2011-11-16 1:14 ` NamJae Jeon
2011-11-16 1:18 ` Joe Perches
0 siblings, 1 reply; 19+ messages in thread
From: NamJae Jeon @ 2011-11-16 1:14 UTC (permalink / raw)
To: Joe Perches
Cc: Nicolas Ferre, David Brown, Daniel Walker, Bryan Huntsman,
Nicolas Pitre, Chris Ball, Guennadi Liakhovetski, Ian Molton,
Bruce Chang, Harald Welte, Pierre Ossman, linux-mmc,
linux-kernel, linux-arm-kernel, linux-arm-msm, linux-omap
2011/11/16 Joe Perches <joe@perches.com>:
> On Wed, 2011-11-16 at 09:52 +0900, NamJae Jeon wrote:
>> 2011/11/16 Joe Perches <joe@perches.com>:
>> > Centralize the pr_<level> uses of mmc_hostname into specific
>> > mmc_host_<level> calls to allow a flexible presentation style
>> > and shorten the code a bit.
>
>> I don't know why pr_info should be surely replaced by mmc_host_info.
>> if it is needed for only host name, I think that existing
>> pr_info/err/debug is sufficient.
>
> Please trim your replies and read the patch description.
my concern is that they feel confuse when coder add print code because
they should use mmc_host<level> for hostname, and pr_<level> is used
in the other case.
>
>
>
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 4/4] mmc: Add mmc_host_<level> logging
2011-11-16 1:14 ` NamJae Jeon
@ 2011-11-16 1:18 ` Joe Perches
0 siblings, 0 replies; 19+ messages in thread
From: Joe Perches @ 2011-11-16 1:18 UTC (permalink / raw)
To: NamJae Jeon
Cc: Nicolas Ferre, David Brown, Daniel Walker, Bryan Huntsman,
Nicolas Pitre, Chris Ball, Guennadi Liakhovetski, Ian Molton,
Bruce Chang, Harald Welte, Pierre Ossman, linux-mmc,
linux-kernel, linux-arm-kernel, linux-arm-msm, linux-omap
On Wed, 2011-11-16 at 10:14 +0900, NamJae Jeon wrote:
> 2011/11/16 Joe Perches <joe@perches.com>:
> > On Wed, 2011-11-16 at 09:52 +0900, NamJae Jeon wrote:
> >> 2011/11/16 Joe Perches <joe@perches.com>:
> >> > Centralize the pr_<level> uses of mmc_hostname into specific
> >> > mmc_host_<level> calls to allow a flexible presentation style
> >> > and shorten the code a bit.
> >> I don't know why pr_info should be surely replaced by mmc_host_info.
> >> if it is needed for only host name, I think that existing
> >> pr_info/err/debug is sufficient.
> > Please trim your replies and read the patch description.
> my concern is that they feel confuse when coder add print code because
> they should use mmc_host<level> for hostname, and pr_<level> is used
> in the other case.
That's one point of view.
It is the same issue though as using dev_<level>
when you have a struct device * and also using
pr_<level> otherwise.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 4/4] mmc: Add mmc_host_<level> logging
2011-11-15 23:32 ` [PATCH 4/4] mmc: Add mmc_host_<level> logging Joe Perches
2011-11-16 0:52 ` NamJae Jeon
@ 2011-11-16 5:00 ` David Brown
2011-11-16 5:31 ` NamJae Jeon
2 siblings, 0 replies; 19+ messages in thread
From: David Brown @ 2011-11-16 5:00 UTC (permalink / raw)
To: Joe Perches
Cc: Nicolas Ferre, David Brown, Daniel Walker, Bryan Huntsman,
Nicolas Pitre, Chris Ball, Guennadi Liakhovetski, Ian Molton,
Bruce Chang, Harald Welte, Pierre Ossman, linux-mmc,
linux-kernel, linux-arm-kernel, linux-arm-msm, linux-omap
On Tue, Nov 15, 2011 at 03:32:08PM -0800, Joe Perches wrote:
> Centralize the pr_<level> uses of mmc_hostname into specific
> mmc_host_<level> calls to allow a flexible presentation style
> and shorten the code a bit.
> drivers/mmc/host/msm_sdcc.c | 101 ++++++++++++++++++---------------------
The MSM ones at least are quite straightforward, so I'm fine with this
part of the change.
Acked-by: David Brown <davidb@codeaurora.org>
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH 4/4] mmc: Add mmc_host_<level> logging
2011-11-15 23:32 ` [PATCH 4/4] mmc: Add mmc_host_<level> logging Joe Perches
2011-11-16 0:52 ` NamJae Jeon
2011-11-16 5:00 ` David Brown
@ 2011-11-16 5:31 ` NamJae Jeon
2 siblings, 0 replies; 19+ messages in thread
From: NamJae Jeon @ 2011-11-16 5:31 UTC (permalink / raw)
To: Joe Perches
Cc: Nicolas Ferre, David Brown, Daniel Walker, Bryan Huntsman,
Nicolas Pitre, Chris Ball, Guennadi Liakhovetski, Ian Molton,
Bruce Chang, Harald Welte, Pierre Ossman, linux-mmc,
linux-kernel, linux-arm-kernel, linux-arm-msm, linux-omap
2011/11/16 Joe Perches <joe@perches.com>:
> Centralize the pr_<level> uses of mmc_hostname into specific
> mmc_host_<level> calls to allow a flexible presentation style
> and shorten the code a bit.
>
> Add mmc_host_<level> macros.
> Convert the logging calls from:
> pr_<level>("%s: ...", mmc_hostname(foo)
> to:
> mmc_host_<level>(foo, ...)
>
> Add a couple of missing newlines.
> Convert bare printks to pr_cont where appropriate.
> Spelling/typo fix of initialiazed to initialized.
>
> Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
> ---
^ permalink raw reply [flat|nested] 19+ messages in thread