* [PATCH v2] fusion: use pci_dev->revision
@ 2011-12-26 16:36 Sergei Shtylyov
0 siblings, 0 replies; only message in thread
From: Sergei Shtylyov @ 2011-12-26 16:36 UTC (permalink / raw)
To: Eric.Moore; +Cc: DL-MPTFusionLinux, linux-scsi, support, linux-kernel
This driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it wasn't
converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all
drivers to use pci_device->revision).
In one case, it even reads PCI revision ID without using it -- that code is now
removed...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
---
This patch is refreshed against the recent Linus' tree.
This patch hasn't been applied to 3.1 or 3.2, hopefully it can be applied to
3.3 at last...
drivers/message/fusion/mptbase.c | 12 ++++--------
drivers/message/fusion/mptctl.c | 4 +---
2 files changed, 5 insertions(+), 11 deletions(-)
Index: linux-2.6/drivers/message/fusion/mptbase.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptbase.c
+++ linux-2.6/drivers/message/fusion/mptbase.c
@@ -1652,7 +1652,6 @@ mpt_mapresources(MPT_ADAPTER *ioc)
unsigned long port;
u32 msize;
u32 psize;
- u8 revision;
int r = -ENODEV;
struct pci_dev *pdev;
@@ -1669,8 +1668,6 @@ mpt_mapresources(MPT_ADAPTER *ioc)
return r;
}
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
-
if (sizeof(dma_addr_t) > 4) {
const uint64_t required_mask = dma_get_required_mask
(&pdev->dev);
@@ -1778,7 +1775,6 @@ mpt_attach(struct pci_dev *pdev, const s
MPT_ADAPTER *ioc;
u8 cb_idx;
int r = -ENODEV;
- u8 revision;
u8 pcixcmd;
static int mpt_ids = 0;
#ifdef CONFIG_PROC_FS
@@ -1886,8 +1882,8 @@ mpt_attach(struct pci_dev *pdev, const s
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
ioc->name, &ioc->facts, &ioc->pfacts[0]));
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
- mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name);
+ mpt_get_product_name(pdev->vendor, pdev->device, pdev->revision,
+ ioc->prod_name);
switch (pdev->device)
{
@@ -1902,7 +1898,7 @@ mpt_attach(struct pci_dev *pdev, const s
break;
case MPI_MANUFACTPAGE_DEVICEID_FC929X:
- if (revision < XL_929) {
+ if (pdev->revision < XL_929) {
/* 929X Chip Fix. Set Split transactions level
* for PCIX. Set MOST bits to zero.
*/
@@ -1933,7 +1929,7 @@ mpt_attach(struct pci_dev *pdev, const s
/* 1030 Chip Fix. Disable Split transactions
* for PCIX. Set MOST bits to zero if Rev < C0( = 8).
*/
- if (revision < C0_1030) {
+ if (pdev->revision < C0_1030) {
pci_read_config_byte(pdev, 0x6a, &pcixcmd);
pcixcmd &= 0x8F;
pci_write_config_byte(pdev, 0x6a, pcixcmd);
Index: linux-2.6/drivers/message/fusion/mptctl.c
===================================================================
--- linux-2.6.orig/drivers/message/fusion/mptctl.c
+++ linux-2.6/drivers/message/fusion/mptctl.c
@@ -1250,7 +1250,6 @@ mptctl_getiocinfo (unsigned long arg, un
int iocnum;
unsigned int port;
int cim_rev;
- u8 revision;
struct scsi_device *sdev;
VirtDevice *vdevice;
@@ -1324,8 +1323,7 @@ mptctl_getiocinfo (unsigned long arg, un
pdev = (struct pci_dev *) ioc->pcidev;
karg->pciId = pdev->device;
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
- karg->hwRev = revision;
+ karg->hwRev = pdev->revision;
karg->subSystemDevice = pdev->subsystem_device;
karg->subSystemVendor = pdev->subsystem_vendor;
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-12-26 15:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-12-26 16:36 [PATCH v2] fusion: use pci_dev->revision Sergei Shtylyov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®