* [PATCH] backlight: add new lp855x backlight driver
[not found] ` <B567DBAB974C0544994013492B949F8E381271028A@EXMAIL03.scwf.nsc.com>
@ 2011-12-11 16:12 ` Kim, Milo
2012-01-06 7:00 ` Kim, Milo
2012-01-17 4:04 ` Kim, Milo
2 siblings, 0 replies; 6+ messages in thread
From: Kim, Milo @ 2011-12-11 16:12 UTC (permalink / raw)
To: rpurdie, linux-kernel; +Cc: linaro-dev
Hello, All
I send the new backlight driver patch for TI LP855x.
* Test Environment
On the OMAP3530 beagleboard.
* Patch base version
Linux-3.2-stable
This patch supports TI LP8550/LP8551/LP8852/LP8553/LP8556 backlight driver.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
Documentation/backlight/lp855x-driver.txt | 89 ++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/lp855x_bl.c | 474 +++++++++++++++++++++++++++++
include/linux/lp855x.h | 133 ++++++++
5 files changed, 704 insertions(+), 0 deletions(-)
create mode 100644 Documentation/backlight/lp855x-driver.txt
create mode 100755 drivers/video/backlight/lp855x_bl.c
create mode 100644 include/linux/lp855x.h
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
new file mode 100644
index 0000000..0879c1e
--- /dev/null
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -0,0 +1,89 @@
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+ Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+Brightness can be controlled by the pwm input or the i2c command.
+The lp855x driver supports both cases.
+
+* Debugfs nodes
+
+For debug information, 3 files are exported in the debugfs.
+
+1) bl_ctl_mode
+Backlight control mode.
+Value : pwm based or register based
+
+2) chip_id
+The lp855x chip id.
+Value : lp8550/lp8551/lp8552/lp8553/lp8556
+
+3) registers
+We can control the lp855x registers via the debugfs.
+Read/Write/Dump mode are supported.
+
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name : Backlight driver name.
+* mode : Brightness control mode. PWM or register based.
+* device_control : Value of DEVICE CONTROL register.
+* initial_brightness : Initial value of backlight brightness.
+* max_brightness : Maximum value of backlight brightness.
+* pwm_data : Platform specific pwm generation functions.
+ Only valid when brightness is pwm input mode.
+ Functions should be implemented by PWM driver.
+ - pwm_set_intensity() : set duty of PWM
+ - pwm_get_intensity() : get current duty of PWM
+* load_new_rom_data :
+ 0 : use default configuration data
+ 1 : update values of eeprom or eprom registers on loading driver
+* size_program : Total size of lp855x_rom_data.
+* rom_data : List of new eeprom/eprom registers.
+
+example 1) lp8552 platform data : i2c register mode with new eeprom data
+
+#define EEPROM_A5_ADDR 0xA5
+#define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */
+
+static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+ {EEPROM_A5_ADDR, EEPROM_A5_VAL},
+};
+
+static struct lp855x_platform_data lp8552_pdata = {
+ .name = "lcd-backlight",
+ .mode = REGISTER_BASED,
+ .device_control = I2C_CONFIG(LP8552),
+ .initial_brightness = INITIAL_BRT,
+ .max_brightness = MAX_BRT,
+ .load_new_rom_data = 1,
+ .size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+ .rom_data = lp8552_eeprom_arr,
+};
+
+example 2) lp8556 platform data : pwm input mode with default rom data
+
+static struct lp855x_platform_data lp8556_pdata = {
+ .name = "lcd-backlight",
+ .mode = PWM_BASED,
+ .device_control = PWM_CONFIG(LP8556),
+ .initial_brightness = INITIAL_BRT,
+ .max_brightness = MAX_BRT,
+ .pwm_data = {
+ .pwm_set_intensity = platform_pwm_set_intensity,
+ .pwm_get_intensity = platform_pwm_get_intensity,
+ },
+};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 278aeaa..4d98c2a 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -342,6 +342,13 @@ config BACKLIGHT_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
backlight driver.
+config BACKLIGHT_LP855X
+ tristate "Backlight driver for Texas Instruments LP855X"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ help
+ This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
+ backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE
endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fdd1fc4..91ae232 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -39,4 +39,5 @@ obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
+obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
new file mode 100755
index 0000000..7a2d891
--- /dev/null
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -0,0 +1,474 @@
+/*
+ * TI LP855x Backlight Driver
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/lp855x.h>
+
+#define BRIGHTNESS_CTRL (0x00)
+#define DEVICE_CTRL (0x01)
+
+#ifdef CONFIG_DEBUG_FS
+struct debug_dentry {
+ struct dentry *dir;
+ struct dentry *reg;
+ struct dentry *chip;
+ struct dentry *blmode;
+};
+#endif
+
+struct lp855x {
+ const char *chipid;
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct device *dev;
+ struct mutex xfer_lock;
+ struct lp855x_platform_data *pdata;
+#ifdef CONFIG_DEBUG_FS
+ struct debug_dentry dd;
+#endif
+};
+
+static int lp855x_i2c_read(struct lp855x *lp, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&lp->xfer_lock);
+ ret = i2c_smbus_read_i2c_block_data(lp->client, reg, len, data);
+ mutex_unlock(&lp->xfer_lock);
+
+ return (ret != len) ? -EIO : 0;
+}
+
+static int lp855x_i2c_write(struct lp855x *lp, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&lp->xfer_lock);
+ ret = i2c_smbus_write_i2c_block_data(lp->client, reg, len, data);
+ mutex_unlock(&lp->xfer_lock);
+
+ return ret;
+}
+
+static inline int lp855x_read_byte(struct lp855x *lp, u8 reg, u8 *data)
+{
+ return lp855x_i2c_read(lp, reg, data, 1);
+}
+
+static inline int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
+{
+ u8 written = data;
+ return lp855x_i2c_write(lp, reg, &written, 1);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int lp855x_dbg_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t lp855x_help_register(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[320];
+ unsigned int len;
+ const char *help = "\n How to read/write LP855x registers\n\n \
+ (example) To read 0x00 register,\n \
+ echo 0x00 r > /sys/kernel/debug/lp855x/registers\n \
+ To write 0xff into 0x1 address,\n \
+ echo 0x00 0xff w > /sys/kernel/debug/lp855x/registers \n \
+ To dump values from 0x00 to 0x06 address,\n \
+ echo 0x00 0x06 d > /sys/kernel/debug/lp855x/registers\n";
+
+ len = snprintf(buf, sizeof(buf), "%s\n", help);
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static char *lp855x_parse_register_cmd(const char *cmd, u8 *byte)
+{
+ char tmp[10];
+ char *blank;
+ unsigned long arg;
+
+ blank = strchr(cmd, ' ');
+ memset(tmp, 0x0, sizeof(tmp));
+ memcpy(tmp, cmd, blank - cmd);
+
+ if (strict_strtol(tmp, 16, &arg) < 0)
+ return NULL;
+
+ *byte = arg;
+ return blank;
+}
+
+static ssize_t lp855x_ctrl_register(struct file *file,
+ const char __user *userbuf, size_t count,
+ loff_t *ppos)
+{
+ char mode, buf[20];
+ char *pos, *pos2;
+ u8 i, arg1, arg2, val;
+ struct lp855x *lp = file->private_data;
+
+ if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
+ return -EFAULT;
+
+ mode = buf[count - 2];
+ switch (mode) {
+ case 'r':
+ if (!lp855x_parse_register_cmd(buf, &arg1))
+ return -EINVAL;
+
+ lp855x_read_byte(lp, arg1, &val);
+ dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", arg1, val);
+ break;
+ case 'w':
+ pos = lp855x_parse_register_cmd(buf, &arg1);
+ if (!pos)
+ return -EINVAL;
+ pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
+ if (!pos2)
+ return -EINVAL;
+
+ lp855x_write_byte(lp, arg1, arg2);
+ dev_info(lp->dev, "Written [0x%.2x] = 0x%.2x\n", arg1, arg2);
+ break;
+ case 'd':
+ pos = lp855x_parse_register_cmd(buf, &arg1);
+ if (!pos)
+ return -EINVAL;
+ pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
+ if (!pos2)
+ return -EINVAL;
+
+ for (i = arg1; i <= arg2; i++) {
+ lp855x_read_byte(lp, i, &val);
+ dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", i, val);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return count;
+}
+
+static ssize_t lp855x_get_chipid(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct lp855x *lp = file->private_data;
+ char buf[10];
+ unsigned int len;
+
+ len = snprintf(buf, sizeof(buf), "%s\n", lp->chipid);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static ssize_t lp855x_get_bl_mode(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[20];
+ unsigned int len;
+ char *strmode = NULL;
+ struct lp855x *lp = file->private_data;
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (mode == PWM_BASED)
+ strmode = "pwm based";
+ else if (mode == REGISTER_BASED)
+ strmode = "register based";
+
+ len = snprintf(buf, sizeof(buf), "%s\n", strmode);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+#define LP855X_DBG_ENTRY(name, pread, pwrite) \
+static const struct file_operations dbg_##name##_fops = { \
+ .open = lp855x_dbg_open, \
+ .read = pread, \
+ .write = pwrite, \
+ .owner = THIS_MODULE, \
+ .llseek = default_llseek, \
+}
+
+LP855X_DBG_ENTRY(registers, lp855x_help_register, lp855x_ctrl_register);
+LP855X_DBG_ENTRY(chip, lp855x_get_chipid, NULL);
+LP855X_DBG_ENTRY(blmode, lp855x_get_bl_mode, NULL);
+
+static void lp855x_create_debugfs(struct lp855x *lp)
+{
+ struct debug_dentry *dd = &lp->dd;
+
+ dd->dir = debugfs_create_dir("lp855x", NULL);
+
+ dd->reg = debugfs_create_file("registers", S_IWUSR | S_IRUGO,
+ dd->dir, lp, &dbg_registers_fops);
+
+ dd->chip = debugfs_create_file("chip_id", S_IRUGO,
+ dd->dir, lp, &dbg_chip_fops);
+
+ dd->blmode = debugfs_create_file("bl_ctl_mode", S_IRUGO,
+ dd->dir, lp, &dbg_blmode_fops);
+}
+
+static void lp855x_remove_debugfs(struct lp855x *lp)
+{
+ struct debug_dentry *dd = &lp->dd;
+
+ debugfs_remove(dd->blmode);
+ debugfs_remove(dd->chip);
+ debugfs_remove(dd->reg);
+ debugfs_remove(dd->dir);
+}
+#else
+static inline void lp855x_create_debugfs(struct lp855x *lp)
+{
+ return;
+}
+
+static inline void lp855x_remove_debugfs(struct lp855x *lp)
+{
+ return;
+}
+#endif
+
+static int lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
+{
+ const char *id = lp->chipid;
+ u8 start, end;
+
+ if (strstr(id, "lp8550") || strstr(id, "lp8551")
+ || strstr(id, "lp8552") || strstr(id, "lp8553")) {
+ start = EEPROM_START;
+ end = EEPROM_END;
+ } else if (strstr(id, "lp8556")) {
+ start = EPROM_START;
+ end = EPROM_END;
+ }
+
+ return (addr >= start && addr <= end) ? 1 : 0;
+}
+
+static void lp855x_init_device(struct lp855x *lp)
+{
+ u8 val, addr;
+ int i, ret;
+ struct lp855x_platform_data *pd = lp->pdata;
+
+ val = pd->initial_brightness;
+ ret = lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+
+ val = pd->device_control;
+ ret |= lp855x_write_byte(lp, DEVICE_CTRL, val);
+
+ if (pd->load_new_rom_data && pd->size_program) {
+ for (i = 0; i < pd->size_program; i++) {
+ addr = pd->rom_data[i].addr;
+ val = pd->rom_data[i].val;
+ if (!lp855x_is_valid_rom_area(lp, addr))
+ continue;
+
+ ret |= lp855x_write_byte(lp, addr, val);
+ }
+ }
+
+ if (ret)
+ dev_err(lp->dev, "i2c write err\n");
+}
+
+static int lp855x_bl_update_status(struct backlight_device *bl)
+{
+ struct lp855x *lp = bl_get_data(bl);
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (bl->props.state & BL_CORE_SUSPENDED)
+ bl->props.brightness = 0;
+
+ if (mode == PWM_BASED) {
+ struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+ int br = bl->props.brightness;
+ int max_br = bl->props.max_brightness;
+
+ if (pd->pwm_set_intensity)
+ pd->pwm_set_intensity(br, max_br);
+
+ } else if (mode == REGISTER_BASED) {
+ u8 val = bl->props.brightness;
+ lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+ }
+
+ return (bl->props.brightness);
+}
+
+static int lp855x_bl_get_brightness(struct backlight_device *bl)
+{
+ struct lp855x *lp = bl_get_data(bl);
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (mode == PWM_BASED) {
+ struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+ int max_br = bl->props.max_brightness;
+
+ if (pd->pwm_get_intensity)
+ bl->props.brightness = pd->pwm_get_intensity(max_br);
+
+ } else if (mode == REGISTER_BASED) {
+ u8 val;
+
+ lp855x_read_byte(lp, BRIGHTNESS_CTRL, &val);
+ bl->props.brightness = val;
+ }
+
+ return (bl->props.brightness);
+}
+
+static const struct backlight_ops lp855x_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = lp855x_bl_update_status,
+ .get_brightness = lp855x_bl_get_brightness,
+};
+
+static int lp855x_backlight_register(struct lp855x *lp)
+{
+ struct backlight_device *bl;
+ struct backlight_properties props;
+ const char *name = lp->pdata->name;
+
+ if (!name)
+ return -ENODEV;
+
+ props.brightness = lp->pdata->initial_brightness;
+ props.max_brightness =
+ (lp->pdata->max_brightness < lp->pdata->initial_brightness) ?
+ 255 : lp->pdata->max_brightness;
+
+ bl = backlight_device_register(name, lp->dev, lp,
+ &lp855x_bl_ops, &props);
+ if (IS_ERR(bl))
+ return -EIO;
+
+ lp->bl = bl;
+
+ return 0;
+}
+
+static void lp855x_backlight_unregister(struct lp855x *lp)
+{
+ if (lp->bl)
+ backlight_device_unregister(lp->bl);
+}
+
+static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+ struct lp855x *lp;
+ struct lp855x_platform_data *pdata = cl->dev.platform_data;
+ int ret;
+
+ if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ goto err_io;
+
+ lp = kzalloc(sizeof(struct lp855x), GFP_KERNEL);
+ if (!lp)
+ goto err_mem;
+
+ lp->client = cl;
+ lp->dev = &cl->dev;
+ lp->pdata = pdata;
+ lp->chipid = id->name;
+ i2c_set_clientdata(cl, lp);
+
+ mutex_init(&lp->xfer_lock);
+
+ lp855x_init_device(lp);
+ ret = lp855x_backlight_register(lp);
+ if (ret)
+ goto err_dev;
+
+ backlight_update_status(lp->bl);
+ lp855x_create_debugfs(lp);
+
+ return ret;
+
+err_io:
+ return -EIO;
+err_mem:
+ return -ENOMEM;
+err_dev:
+ dev_err(lp->dev, "can not register backlight device. errcode = %d\n",
+ ret);
+ kfree(lp);
+ return ret;
+}
+
+static int __devexit lp855x_remove(struct i2c_client *cl)
+{
+ struct lp855x *lp = i2c_get_clientdata(cl);
+
+ lp->bl->props.brightness = 0;
+ backlight_update_status(lp->bl);
+ lp855x_remove_debugfs(lp);
+ lp855x_backlight_unregister(lp);
+ kfree(lp);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp855x_ids[] = {
+ {"lp8550", LP8550},
+ {"lp8551", LP8551},
+ {"lp8552", LP8552},
+ {"lp8553", LP8553},
+ {"lp8556", LP8556},
+};
+
+static struct i2c_driver lp855x_driver = {
+ .driver = {
+ .name = "lp855x",
+ },
+ .probe = lp855x_probe,
+ .remove = __devexit_p(lp855x_remove),
+ .id_table = lp855x_ids,
+};
+
+static int __init lp855x_init(void)
+{
+ return i2c_add_driver(&lp855x_driver);
+}
+
+static void __exit lp855x_exit(void)
+{
+ i2c_del_driver(&lp855x_driver);
+}
+
+module_init(lp855x_init);
+module_exit(lp855x_exit);
+
+MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>, Dainel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h
new file mode 100644
index 0000000..16e2474
--- /dev/null
+++ b/include/linux/lp855x.h
@@ -0,0 +1,133 @@
+/*
+ * lp855x.h - TI LP8556 Backlight Driver
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP855X_H
+#define _LP855X_H
+
+#define BL_CTL_SHFT (0)
+#define BRT_MODE_SHFT (1)
+#define BRT_MODE_MASK (0x06)
+
+/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
+#define ENABLE_BL (1)
+#define DISABLE_BL (0)
+
+#define I2C_CONFIG(id) id ## _I2C_CONFIG
+#define PWM_CONFIG(id) id ## _PWM_CONFIG
+
+/* DEVICE CONTROL register - LP8550 */
+#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \
+ (LP8550_I2C_ONLY << BRT_MODE_SHFT))
+
+/* DEVICE CONTROL register - LP8551 */
+#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8552 */
+#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8553 */
+#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8556 */
+#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT)
+#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \
+ (LP8556_I2C_ONLY << BRT_MODE_SHFT))
+#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT)
+
+/* ROM area boundary */
+#define EEPROM_START (0xA0)
+#define EEPROM_END (0xA7)
+#define EPROM_START (0xA0)
+#define EPROM_END (0xAF)
+
+enum lp855x_chip_id {
+ LP8550,
+ LP8551,
+ LP8552,
+ LP8553,
+ LP8556,
+};
+
+enum lp855x_brightness_ctrl_mode {
+ PWM_BASED = 1,
+ REGISTER_BASED,
+};
+
+enum lp8550_brighntess_source {
+ LP8550_PWM_ONLY,
+ LP8550_I2C_ONLY = 2,
+};
+
+enum lp8551_brighntess_source {
+ LP8551_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8551_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8552_brighntess_source {
+ LP8552_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8552_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8553_brighntess_source {
+ LP8553_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8553_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8556_brightness_source {
+ LP8556_PWM_ONLY,
+ LP8556_COMBINED1, /* pwm + i2c before the shaper block */
+ LP8556_I2C_ONLY,
+ LP8556_COMBINED2, /* pwm + i2c after the shaper block */
+};
+
+struct lp855x_pwm_data {
+ void (*pwm_set_intensity) (int brightness, int max_brightness);
+ int (*pwm_get_intensity) (int max_brightness);
+};
+
+struct lp855x_rom_data {
+ u8 addr;
+ u8 val;
+};
+
+/**
+ * struct lp855x_platform_data
+ * @name : backlight driver name
+ * @mode : brightness control by pwm or lp855x register
+ * @device_control : value of DEVICE CONTROL register
+ * @initial_brightness : initial value of backlight brightness
+ * @max_brightness : maximum value of backlight brightness
+ * @pwm_data : platform specific pwm generation functions.
+ Only valid when mode is PWM_BASED.
+ * @load_new_rom_data :
+ 0 : use default configuration data
+ 1 : update values of eeprom or eprom registers on loading driver
+ * @size_program : total size of lp855x_rom_data
+ * @rom_data : list of new eeprom/eprom registers
+ */
+struct lp855x_platform_data {
+ const char *name;
+ enum lp855x_brightness_ctrl_mode mode;
+ u8 device_control;
+ int initial_brightness;
+ int max_brightness;
+ struct lp855x_pwm_data pwm_data;
+ u8 load_new_rom_data;
+ int size_program;
+ struct lp855x_rom_data *rom_data;
+};
+
+#endif
--
1.7.4.1
Best Regards
Milo (Woogyom) Kim
Texas Instruments Incorporated
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH] backlight: add new lp855x backlight driver
[not found] ` <B567DBAB974C0544994013492B949F8E381271028A@EXMAIL03.scwf.nsc.com>
2011-12-11 16:12 ` [PATCH] backlight: add new lp855x backlight driver Kim, Milo
@ 2012-01-06 7:00 ` Kim, Milo
2012-01-21 0:23 ` Andrew Morton
2012-01-17 4:04 ` Kim, Milo
2 siblings, 1 reply; 6+ messages in thread
From: Kim, Milo @ 2012-01-06 7:00 UTC (permalink / raw)
To: linux-kernel, rchard.purdie; +Cc: Kim, Milo
This patch supports TI LP8550/LP8551/LP8852/LP8553/LP8556 backlight driver.
The brightness can be controlled by the I2C or PWM input.
The lp855x driver provides both modes.
For the PWM control, pwm-specific functions can be defined in the platform data.
And some information can be read via the debugfs.
For the details, please refer to 'Documentation/backlight/lp855x-driver.txt'.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
Documentation/backlight/lp855x-driver.txt | 89 ++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/lp855x_bl.c | 474 +++++++++++++++++++++++++++++
include/linux/lp855x.h | 133 ++++++++
5 files changed, 704 insertions(+), 0 deletions(-)
create mode 100644 Documentation/backlight/lp855x-driver.txt
create mode 100755 drivers/video/backlight/lp855x_bl.c
create mode 100644 include/linux/lp855x.h
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
new file mode 100644
index 0000000..0879c1e
--- /dev/null
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -0,0 +1,89 @@
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+ Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+Brightness can be controlled by the pwm input or the i2c command.
+The lp855x driver supports both cases.
+
+* Debugfs nodes
+
+For debug information, 3 files are exported in the debugfs.
+
+1) bl_ctl_mode
+Backlight control mode.
+Value : pwm based or register based
+
+2) chip_id
+The lp855x chip id.
+Value : lp8550/lp8551/lp8552/lp8553/lp8556
+
+3) registers
+We can control the lp855x registers via the debugfs.
+Read/Write/Dump mode are supported.
+
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name : Backlight driver name.
+* mode : Brightness control mode. PWM or register based.
+* device_control : Value of DEVICE CONTROL register.
+* initial_brightness : Initial value of backlight brightness.
+* max_brightness : Maximum value of backlight brightness.
+* pwm_data : Platform specific pwm generation functions.
+ Only valid when brightness is pwm input mode.
+ Functions should be implemented by PWM driver.
+ - pwm_set_intensity() : set duty of PWM
+ - pwm_get_intensity() : get current duty of PWM
+* load_new_rom_data :
+ 0 : use default configuration data
+ 1 : update values of eeprom or eprom registers on loading driver
+* size_program : Total size of lp855x_rom_data.
+* rom_data : List of new eeprom/eprom registers.
+
+example 1) lp8552 platform data : i2c register mode with new eeprom data
+
+#define EEPROM_A5_ADDR 0xA5
+#define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */
+
+static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+ {EEPROM_A5_ADDR, EEPROM_A5_VAL},
+};
+
+static struct lp855x_platform_data lp8552_pdata = {
+ .name = "lcd-backlight",
+ .mode = REGISTER_BASED,
+ .device_control = I2C_CONFIG(LP8552),
+ .initial_brightness = INITIAL_BRT,
+ .max_brightness = MAX_BRT,
+ .load_new_rom_data = 1,
+ .size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+ .rom_data = lp8552_eeprom_arr,
+};
+
+example 2) lp8556 platform data : pwm input mode with default rom data
+
+static struct lp855x_platform_data lp8556_pdata = {
+ .name = "lcd-backlight",
+ .mode = PWM_BASED,
+ .device_control = PWM_CONFIG(LP8556),
+ .initial_brightness = INITIAL_BRT,
+ .max_brightness = MAX_BRT,
+ .pwm_data = {
+ .pwm_set_intensity = platform_pwm_set_intensity,
+ .pwm_get_intensity = platform_pwm_get_intensity,
+ },
+};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 278aeaa..4d98c2a 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -342,6 +342,13 @@ config BACKLIGHT_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
backlight driver.
+config BACKLIGHT_LP855X
+ tristate "Backlight driver for Texas Instruments LP855X"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ help
+ This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
+ backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE
endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fdd1fc4..91ae232 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -39,4 +39,5 @@ obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
+obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
new file mode 100755
index 0000000..7a2d891
--- /dev/null
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -0,0 +1,474 @@
+/*
+ * TI LP855x Backlight Driver
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/lp855x.h>
+
+#define BRIGHTNESS_CTRL (0x00)
+#define DEVICE_CTRL (0x01)
+
+#ifdef CONFIG_DEBUG_FS
+struct debug_dentry {
+ struct dentry *dir;
+ struct dentry *reg;
+ struct dentry *chip;
+ struct dentry *blmode;
+};
+#endif
+
+struct lp855x {
+ const char *chipid;
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct device *dev;
+ struct mutex xfer_lock;
+ struct lp855x_platform_data *pdata;
+#ifdef CONFIG_DEBUG_FS
+ struct debug_dentry dd;
+#endif
+};
+
+static int lp855x_i2c_read(struct lp855x *lp, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&lp->xfer_lock);
+ ret = i2c_smbus_read_i2c_block_data(lp->client, reg, len, data);
+ mutex_unlock(&lp->xfer_lock);
+
+ return (ret != len) ? -EIO : 0;
+}
+
+static int lp855x_i2c_write(struct lp855x *lp, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&lp->xfer_lock);
+ ret = i2c_smbus_write_i2c_block_data(lp->client, reg, len, data);
+ mutex_unlock(&lp->xfer_lock);
+
+ return ret;
+}
+
+static inline int lp855x_read_byte(struct lp855x *lp, u8 reg, u8 *data)
+{
+ return lp855x_i2c_read(lp, reg, data, 1);
+}
+
+static inline int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
+{
+ u8 written = data;
+ return lp855x_i2c_write(lp, reg, &written, 1);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int lp855x_dbg_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t lp855x_help_register(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[320];
+ unsigned int len;
+ const char *help = "\n How to read/write LP855x registers\n\n \
+ (example) To read 0x00 register,\n \
+ echo 0x00 r > /sys/kernel/debug/lp855x/registers\n \
+ To write 0xff into 0x1 address,\n \
+ echo 0x00 0xff w > /sys/kernel/debug/lp855x/registers \n \
+ To dump values from 0x00 to 0x06 address,\n \
+ echo 0x00 0x06 d > /sys/kernel/debug/lp855x/registers\n";
+
+ len = snprintf(buf, sizeof(buf), "%s\n", help);
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static char *lp855x_parse_register_cmd(const char *cmd, u8 *byte)
+{
+ char tmp[10];
+ char *blank;
+ unsigned long arg;
+
+ blank = strchr(cmd, ' ');
+ memset(tmp, 0x0, sizeof(tmp));
+ memcpy(tmp, cmd, blank - cmd);
+
+ if (strict_strtol(tmp, 16, &arg) < 0)
+ return NULL;
+
+ *byte = arg;
+ return blank;
+}
+
+static ssize_t lp855x_ctrl_register(struct file *file,
+ const char __user *userbuf, size_t count,
+ loff_t *ppos)
+{
+ char mode, buf[20];
+ char *pos, *pos2;
+ u8 i, arg1, arg2, val;
+ struct lp855x *lp = file->private_data;
+
+ if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
+ return -EFAULT;
+
+ mode = buf[count - 2];
+ switch (mode) {
+ case 'r':
+ if (!lp855x_parse_register_cmd(buf, &arg1))
+ return -EINVAL;
+
+ lp855x_read_byte(lp, arg1, &val);
+ dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", arg1, val);
+ break;
+ case 'w':
+ pos = lp855x_parse_register_cmd(buf, &arg1);
+ if (!pos)
+ return -EINVAL;
+ pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
+ if (!pos2)
+ return -EINVAL;
+
+ lp855x_write_byte(lp, arg1, arg2);
+ dev_info(lp->dev, "Written [0x%.2x] = 0x%.2x\n", arg1, arg2);
+ break;
+ case 'd':
+ pos = lp855x_parse_register_cmd(buf, &arg1);
+ if (!pos)
+ return -EINVAL;
+ pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
+ if (!pos2)
+ return -EINVAL;
+
+ for (i = arg1; i <= arg2; i++) {
+ lp855x_read_byte(lp, i, &val);
+ dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", i, val);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return count;
+}
+
+static ssize_t lp855x_get_chipid(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct lp855x *lp = file->private_data;
+ char buf[10];
+ unsigned int len;
+
+ len = snprintf(buf, sizeof(buf), "%s\n", lp->chipid);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static ssize_t lp855x_get_bl_mode(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[20];
+ unsigned int len;
+ char *strmode = NULL;
+ struct lp855x *lp = file->private_data;
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (mode == PWM_BASED)
+ strmode = "pwm based";
+ else if (mode == REGISTER_BASED)
+ strmode = "register based";
+
+ len = snprintf(buf, sizeof(buf), "%s\n", strmode);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+#define LP855X_DBG_ENTRY(name, pread, pwrite) \
+static const struct file_operations dbg_##name##_fops = { \
+ .open = lp855x_dbg_open, \
+ .read = pread, \
+ .write = pwrite, \
+ .owner = THIS_MODULE, \
+ .llseek = default_llseek, \
+}
+
+LP855X_DBG_ENTRY(registers, lp855x_help_register, lp855x_ctrl_register);
+LP855X_DBG_ENTRY(chip, lp855x_get_chipid, NULL);
+LP855X_DBG_ENTRY(blmode, lp855x_get_bl_mode, NULL);
+
+static void lp855x_create_debugfs(struct lp855x *lp)
+{
+ struct debug_dentry *dd = &lp->dd;
+
+ dd->dir = debugfs_create_dir("lp855x", NULL);
+
+ dd->reg = debugfs_create_file("registers", S_IWUSR | S_IRUGO,
+ dd->dir, lp, &dbg_registers_fops);
+
+ dd->chip = debugfs_create_file("chip_id", S_IRUGO,
+ dd->dir, lp, &dbg_chip_fops);
+
+ dd->blmode = debugfs_create_file("bl_ctl_mode", S_IRUGO,
+ dd->dir, lp, &dbg_blmode_fops);
+}
+
+static void lp855x_remove_debugfs(struct lp855x *lp)
+{
+ struct debug_dentry *dd = &lp->dd;
+
+ debugfs_remove(dd->blmode);
+ debugfs_remove(dd->chip);
+ debugfs_remove(dd->reg);
+ debugfs_remove(dd->dir);
+}
+#else
+static inline void lp855x_create_debugfs(struct lp855x *lp)
+{
+ return;
+}
+
+static inline void lp855x_remove_debugfs(struct lp855x *lp)
+{
+ return;
+}
+#endif
+
+static int lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
+{
+ const char *id = lp->chipid;
+ u8 start, end;
+
+ if (strstr(id, "lp8550") || strstr(id, "lp8551")
+ || strstr(id, "lp8552") || strstr(id, "lp8553")) {
+ start = EEPROM_START;
+ end = EEPROM_END;
+ } else if (strstr(id, "lp8556")) {
+ start = EPROM_START;
+ end = EPROM_END;
+ }
+
+ return (addr >= start && addr <= end) ? 1 : 0;
+}
+
+static void lp855x_init_device(struct lp855x *lp)
+{
+ u8 val, addr;
+ int i, ret;
+ struct lp855x_platform_data *pd = lp->pdata;
+
+ val = pd->initial_brightness;
+ ret = lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+
+ val = pd->device_control;
+ ret |= lp855x_write_byte(lp, DEVICE_CTRL, val);
+
+ if (pd->load_new_rom_data && pd->size_program) {
+ for (i = 0; i < pd->size_program; i++) {
+ addr = pd->rom_data[i].addr;
+ val = pd->rom_data[i].val;
+ if (!lp855x_is_valid_rom_area(lp, addr))
+ continue;
+
+ ret |= lp855x_write_byte(lp, addr, val);
+ }
+ }
+
+ if (ret)
+ dev_err(lp->dev, "i2c write err\n");
+}
+
+static int lp855x_bl_update_status(struct backlight_device *bl)
+{
+ struct lp855x *lp = bl_get_data(bl);
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (bl->props.state & BL_CORE_SUSPENDED)
+ bl->props.brightness = 0;
+
+ if (mode == PWM_BASED) {
+ struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+ int br = bl->props.brightness;
+ int max_br = bl->props.max_brightness;
+
+ if (pd->pwm_set_intensity)
+ pd->pwm_set_intensity(br, max_br);
+
+ } else if (mode == REGISTER_BASED) {
+ u8 val = bl->props.brightness;
+ lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+ }
+
+ return (bl->props.brightness);
+}
+
+static int lp855x_bl_get_brightness(struct backlight_device *bl)
+{
+ struct lp855x *lp = bl_get_data(bl);
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (mode == PWM_BASED) {
+ struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+ int max_br = bl->props.max_brightness;
+
+ if (pd->pwm_get_intensity)
+ bl->props.brightness = pd->pwm_get_intensity(max_br);
+
+ } else if (mode == REGISTER_BASED) {
+ u8 val;
+
+ lp855x_read_byte(lp, BRIGHTNESS_CTRL, &val);
+ bl->props.brightness = val;
+ }
+
+ return (bl->props.brightness);
+}
+
+static const struct backlight_ops lp855x_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = lp855x_bl_update_status,
+ .get_brightness = lp855x_bl_get_brightness,
+};
+
+static int lp855x_backlight_register(struct lp855x *lp)
+{
+ struct backlight_device *bl;
+ struct backlight_properties props;
+ const char *name = lp->pdata->name;
+
+ if (!name)
+ return -ENODEV;
+
+ props.brightness = lp->pdata->initial_brightness;
+ props.max_brightness =
+ (lp->pdata->max_brightness < lp->pdata->initial_brightness) ?
+ 255 : lp->pdata->max_brightness;
+
+ bl = backlight_device_register(name, lp->dev, lp,
+ &lp855x_bl_ops, &props);
+ if (IS_ERR(bl))
+ return -EIO;
+
+ lp->bl = bl;
+
+ return 0;
+}
+
+static void lp855x_backlight_unregister(struct lp855x *lp)
+{
+ if (lp->bl)
+ backlight_device_unregister(lp->bl);
+}
+
+static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+ struct lp855x *lp;
+ struct lp855x_platform_data *pdata = cl->dev.platform_data;
+ int ret;
+
+ if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ goto err_io;
+
+ lp = kzalloc(sizeof(struct lp855x), GFP_KERNEL);
+ if (!lp)
+ goto err_mem;
+
+ lp->client = cl;
+ lp->dev = &cl->dev;
+ lp->pdata = pdata;
+ lp->chipid = id->name;
+ i2c_set_clientdata(cl, lp);
+
+ mutex_init(&lp->xfer_lock);
+
+ lp855x_init_device(lp);
+ ret = lp855x_backlight_register(lp);
+ if (ret)
+ goto err_dev;
+
+ backlight_update_status(lp->bl);
+ lp855x_create_debugfs(lp);
+
+ return ret;
+
+err_io:
+ return -EIO;
+err_mem:
+ return -ENOMEM;
+err_dev:
+ dev_err(lp->dev, "can not register backlight device. errcode = %d\n",
+ ret);
+ kfree(lp);
+ return ret;
+}
+
+static int __devexit lp855x_remove(struct i2c_client *cl)
+{
+ struct lp855x *lp = i2c_get_clientdata(cl);
+
+ lp->bl->props.brightness = 0;
+ backlight_update_status(lp->bl);
+ lp855x_remove_debugfs(lp);
+ lp855x_backlight_unregister(lp);
+ kfree(lp);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp855x_ids[] = {
+ {"lp8550", LP8550},
+ {"lp8551", LP8551},
+ {"lp8552", LP8552},
+ {"lp8553", LP8553},
+ {"lp8556", LP8556},
+};
+
+static struct i2c_driver lp855x_driver = {
+ .driver = {
+ .name = "lp855x",
+ },
+ .probe = lp855x_probe,
+ .remove = __devexit_p(lp855x_remove),
+ .id_table = lp855x_ids,
+};
+
+static int __init lp855x_init(void)
+{
+ return i2c_add_driver(&lp855x_driver);
+}
+
+static void __exit lp855x_exit(void)
+{
+ i2c_del_driver(&lp855x_driver);
+}
+
+module_init(lp855x_init);
+module_exit(lp855x_exit);
+
+MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>, Dainel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h
new file mode 100644
index 0000000..16e2474
--- /dev/null
+++ b/include/linux/lp855x.h
@@ -0,0 +1,133 @@
+/*
+ * lp855x.h - TI LP8556 Backlight Driver
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP855X_H
+#define _LP855X_H
+
+#define BL_CTL_SHFT (0)
+#define BRT_MODE_SHFT (1)
+#define BRT_MODE_MASK (0x06)
+
+/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
+#define ENABLE_BL (1)
+#define DISABLE_BL (0)
+
+#define I2C_CONFIG(id) id ## _I2C_CONFIG
+#define PWM_CONFIG(id) id ## _PWM_CONFIG
+
+/* DEVICE CONTROL register - LP8550 */
+#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \
+ (LP8550_I2C_ONLY << BRT_MODE_SHFT))
+
+/* DEVICE CONTROL register - LP8551 */
+#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8552 */
+#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8553 */
+#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8556 */
+#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT)
+#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \
+ (LP8556_I2C_ONLY << BRT_MODE_SHFT))
+#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT)
+
+/* ROM area boundary */
+#define EEPROM_START (0xA0)
+#define EEPROM_END (0xA7)
+#define EPROM_START (0xA0)
+#define EPROM_END (0xAF)
+
+enum lp855x_chip_id {
+ LP8550,
+ LP8551,
+ LP8552,
+ LP8553,
+ LP8556,
+};
+
+enum lp855x_brightness_ctrl_mode {
+ PWM_BASED = 1,
+ REGISTER_BASED,
+};
+
+enum lp8550_brighntess_source {
+ LP8550_PWM_ONLY,
+ LP8550_I2C_ONLY = 2,
+};
+
+enum lp8551_brighntess_source {
+ LP8551_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8551_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8552_brighntess_source {
+ LP8552_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8552_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8553_brighntess_source {
+ LP8553_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8553_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8556_brightness_source {
+ LP8556_PWM_ONLY,
+ LP8556_COMBINED1, /* pwm + i2c before the shaper block */
+ LP8556_I2C_ONLY,
+ LP8556_COMBINED2, /* pwm + i2c after the shaper block */
+};
+
+struct lp855x_pwm_data {
+ void (*pwm_set_intensity) (int brightness, int max_brightness);
+ int (*pwm_get_intensity) (int max_brightness);
+};
+
+struct lp855x_rom_data {
+ u8 addr;
+ u8 val;
+};
+
+/**
+ * struct lp855x_platform_data
+ * @name : backlight driver name
+ * @mode : brightness control by pwm or lp855x register
+ * @device_control : value of DEVICE CONTROL register
+ * @initial_brightness : initial value of backlight brightness
+ * @max_brightness : maximum value of backlight brightness
+ * @pwm_data : platform specific pwm generation functions.
+ Only valid when mode is PWM_BASED.
+ * @load_new_rom_data :
+ 0 : use default configuration data
+ 1 : update values of eeprom or eprom registers on loading driver
+ * @size_program : total size of lp855x_rom_data
+ * @rom_data : list of new eeprom/eprom registers
+ */
+struct lp855x_platform_data {
+ const char *name;
+ enum lp855x_brightness_ctrl_mode mode;
+ u8 device_control;
+ int initial_brightness;
+ int max_brightness;
+ struct lp855x_pwm_data pwm_data;
+ u8 load_new_rom_data;
+ int size_program;
+ struct lp855x_rom_data *rom_data;
+};
+
+#endif
--
1.7.4.1
Best Regards
Milo (Woogyom) Kim
Texas Instruments Incorporated
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] backlight: add new lp855x backlight driver
2012-01-06 7:00 ` Kim, Milo
@ 2012-01-21 0:23 ` Andrew Morton
2012-01-25 6:21 ` Kim, Milo
0 siblings, 1 reply; 6+ messages in thread
From: Andrew Morton @ 2012-01-21 0:23 UTC (permalink / raw)
To: Kim, Milo; +Cc: linux-kernel, Kim, Milo, Richard Purdie
On Thu, 5 Jan 2012 23:00:24 -0800
"Kim, Milo" <Milo.Kim@ti.com> wrote:
> This patch supports TI LP8550/LP8551/LP8852/LP8553/LP8556 backlight driver.
>
> The brightness can be controlled by the I2C or PWM input.
> The lp855x driver provides both modes.
> For the PWM control, pwm-specific functions can be defined in the platform data.
> And some information can be read via the debugfs.
>
> For the details, please refer to 'Documentation/backlight/lp855x-driver.txt'.
>
>
> ...
>
> +static ssize_t lp855x_help_register(struct file *file, char __user *userbuf,
> + size_t count, loff_t *ppos)
> +{
> + char buf[320];
> + unsigned int len;
> + const char *help = "\n How to read/write LP855x registers\n\n \
> + (example) To read 0x00 register,\n \
> + echo 0x00 r > /sys/kernel/debug/lp855x/registers\n \
> + To write 0xff into 0x1 address,\n \
> + echo 0x00 0xff w > /sys/kernel/debug/lp855x/registers \n \
> + To dump values from 0x00 to 0x06 address,\n \
> + echo 0x00 0x06 d > /sys/kernel/debug/lp855x/registers\n";
lol. Oh well, it's only debugfs.
> + len = snprintf(buf, sizeof(buf), "%s\n", help);
`len' should have type size_t.
> + if (len > sizeof(buf))
> + len = sizeof(buf);
Here you could use max(). But a better approach is to form the output
using scnprintf().
> + return simple_read_from_buffer(userbuf, count, ppos, buf, len);
> +}
> +
> +static char *lp855x_parse_register_cmd(const char *cmd, u8 *byte)
> +{
> + char tmp[10];
> + char *blank;
> + unsigned long arg;
> +
> + blank = strchr(cmd, ' ');
> + memset(tmp, 0x0, sizeof(tmp));
> + memcpy(tmp, cmd, blank - cmd);
> +
> + if (strict_strtol(tmp, 16, &arg) < 0)
> + return NULL;
Gee, what's all this code doing? Please add a nice comment explaining
what the input format is, and what this function is trying to do with
it.
I worry about what it does when strchr() returns NULL!
> + *byte = arg;
> + return blank;
> +}
> +
> +static ssize_t lp855x_ctrl_register(struct file *file,
> + const char __user *userbuf, size_t count,
> + loff_t *ppos)
> +{
> + char mode, buf[20];
> + char *pos, *pos2;
> + u8 i, arg1, arg2, val;
> + struct lp855x *lp = file->private_data;
> +
> + if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
> + return -EFAULT;
Looks risky. If count>sizeof(buf), this will quietly truncate the
user's input. It would be much better to reject the input in this
case.
> + mode = buf[count - 2];
> + switch (mode) {
> + case 'r':
> + if (!lp855x_parse_register_cmd(buf, &arg1))
> + return -EINVAL;
> +
> + lp855x_read_byte(lp, arg1, &val);
> + dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", arg1, val);
> + break;
> + case 'w':
> + pos = lp855x_parse_register_cmd(buf, &arg1);
> + if (!pos)
> + return -EINVAL;
> + pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
> + if (!pos2)
> + return -EINVAL;
> +
> + lp855x_write_byte(lp, arg1, arg2);
> + dev_info(lp->dev, "Written [0x%.2x] = 0x%.2x\n", arg1, arg2);
> + break;
> + case 'd':
> + pos = lp855x_parse_register_cmd(buf, &arg1);
> + if (!pos)
> + return -EINVAL;
> + pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
> + if (!pos2)
> + return -EINVAL;
> +
> + for (i = arg1; i <= arg2; i++) {
> + lp855x_read_byte(lp, i, &val);
> + dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", i, val);
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return count;
> +}
> +
> +static ssize_t lp855x_get_chipid(struct file *file, char __user *userbuf,
> + size_t count, loff_t *ppos)
> +{
> + struct lp855x *lp = file->private_data;
> + char buf[10];
> + unsigned int len;
> +
> + len = snprintf(buf, sizeof(buf), "%s\n", lp->chipid);
> +
> + if (len > sizeof(buf))
> + len = sizeof(buf);
See above.
> + return simple_read_from_buffer(userbuf, count, ppos, buf, len);
> +}
> +
> +static ssize_t lp855x_get_bl_mode(struct file *file, char __user *userbuf,
> + size_t count, loff_t *ppos)
> +{
> + char buf[20];
> + unsigned int len;
> + char *strmode = NULL;
> + struct lp855x *lp = file->private_data;
> + enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
> +
> + if (mode == PWM_BASED)
> + strmode = "pwm based";
> + else if (mode == REGISTER_BASED)
> + strmode = "register based";
> +
> + len = snprintf(buf, sizeof(buf), "%s\n", strmode);
> +
> + if (len > sizeof(buf))
> + len = sizeof(buf);
More...
> + return simple_read_from_buffer(userbuf, count, ppos, buf, len);
> +}
> +
> +#define LP855X_DBG_ENTRY(name, pread, pwrite) \
> +static const struct file_operations dbg_##name##_fops = { \
> + .open = lp855x_dbg_open, \
> + .read = pread, \
> + .write = pwrite, \
> + .owner = THIS_MODULE, \
> + .llseek = default_llseek, \
> +}
> +
> +LP855X_DBG_ENTRY(registers, lp855x_help_register, lp855x_ctrl_register);
> +LP855X_DBG_ENTRY(chip, lp855x_get_chipid, NULL);
> +LP855X_DBG_ENTRY(blmode, lp855x_get_bl_mode, NULL);
> +
> +static void lp855x_create_debugfs(struct lp855x *lp)
> +{
> + struct debug_dentry *dd = &lp->dd;
> +
> + dd->dir = debugfs_create_dir("lp855x", NULL);
> +
> + dd->reg = debugfs_create_file("registers", S_IWUSR | S_IRUGO,
> + dd->dir, lp, &dbg_registers_fops);
> +
> + dd->chip = debugfs_create_file("chip_id", S_IRUGO,
> + dd->dir, lp, &dbg_chip_fops);
> +
> + dd->blmode = debugfs_create_file("bl_ctl_mode", S_IRUGO,
> + dd->dir, lp, &dbg_blmode_fops);
Error checking?
> +}
> +
>
> ...
>
> +static void lp855x_init_device(struct lp855x *lp)
> +{
> + u8 val, addr;
> + int i, ret;
> + struct lp855x_platform_data *pd = lp->pdata;
> +
> + val = pd->initial_brightness;
> + ret = lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
> +
> + val = pd->device_control;
> + ret |= lp855x_write_byte(lp, DEVICE_CTRL, val);
> +
> + if (pd->load_new_rom_data && pd->size_program) {
> + for (i = 0; i < pd->size_program; i++) {
> + addr = pd->rom_data[i].addr;
> + val = pd->rom_data[i].val;
> + if (!lp855x_is_valid_rom_area(lp, addr))
> + continue;
> +
> + ret |= lp855x_write_byte(lp, addr, val);
> + }
> + }
> +
> + if (ret)
> + dev_err(lp->dev, "i2c write err\n");
> +}
This isn't very good. lp855x_write_byte() can return various -Efoo
values: -EINVAL, -ENOMEM, etc. But this function can end up
bitwise-ORing those errnos together, thus producing a completely new
(and wrong) errno.
That's not a big problem in this case, because that errno is simply
dropped on the floor. However it would be more useful if the errno
were reported to the operator in that dev_err() call.
>
> ...
>
> +static int lp855x_backlight_register(struct lp855x *lp)
> +{
> + struct backlight_device *bl;
> + struct backlight_properties props;
> + const char *name = lp->pdata->name;
> +
> + if (!name)
> + return -ENODEV;
> +
> + props.brightness = lp->pdata->initial_brightness;
> + props.max_brightness =
> + (lp->pdata->max_brightness < lp->pdata->initial_brightness) ?
> + 255 : lp->pdata->max_brightness;
> +
> + bl = backlight_device_register(name, lp->dev, lp,
> + &lp855x_bl_ops, &props);
> + if (IS_ERR(bl))
> + return -EIO;
If `lb' contains an errno, we should return that errno to the caller
rather than unconditionally overwriting it with -EIO?
> + lp->bl = bl;
> +
> + return 0;
> +}
> +
>
> ...
>
^ permalink raw reply [flat|nested] 6+ messages in thread* RE: [PATCH] backlight: add new lp855x backlight driver
2012-01-21 0:23 ` Andrew Morton
@ 2012-01-25 6:21 ` Kim, Milo
0 siblings, 0 replies; 6+ messages in thread
From: Kim, Milo @ 2012-01-25 6:21 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Richard Purdie
-----Original Message-----
From: Andrew Morton [mailto:akpm@linux-foundation.org]
Sent: Saturday, January 21, 2012 9:24 AM
To: Kim, Milo
Cc: linux-kernel@vger.kernel.org; Kim, Milo; Richard Purdie
Subject: Re: [PATCH] backlight: add new lp855x backlight driver
On Thu, 5 Jan 2012 23:00:24 -0800
"Kim, Milo" <Milo.Kim@ti.com> wrote:
>> + len = snprintf(buf, sizeof(buf), "%s\n", help);
> `len' should have type size_t.
>> + if (len > sizeof(buf))
>> + len = sizeof(buf);
> Here you could use max(). But a better approach is to form the output
> using scnprintf().
This code can be replaced with scnprintf().
But in the updated driver, debugfs nodes will be removed.
The 'chip_id' and 'bl_ctl_mode' will be moved to the lp855x device attributes.
And register access is not necessary in lp855x driver.
>> +static char *lp855x_parse_register_cmd(const char *cmd, u8 *byte)
>> +{
>> + char tmp[10];
>> + char *blank;
>> + unsigned long arg;
>> +
>> + blank = strchr(cmd, ' ');
>> + memset(tmp, 0x0, sizeof(tmp));
>> + memcpy(tmp, cmd, blank - cmd);
>> +
>> + if (strict_strtol(tmp, 16, &arg) < 0)
>> + return NULL;
> Gee, what's all this code doing? Please add a nice comment explaining
> what the input format is, and what this function is trying to do with
> it.
> I worry about what it does when strchr() returns NULL!
Will be removed in the updated driver.
>> +static ssize_t lp855x_ctrl_register(struct file *file,
>> + const char __user *userbuf, size_t count,
>> + loff_t *ppos)
>> +{
>> + char mode, buf[20];
>> + char *pos, *pos2;
>> + u8 i, arg1, arg2, val;
>> + struct lp855x *lp = file->private_data;
>> +
>> + if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
>> + return -EFAULT;
> Looks risky. If count>sizeof(buf), this will quietly truncate the
> user's input. It would be much better to reject the input in this
> case.
Will be removed in the updated driver.
>> +static ssize_t lp855x_get_chipid(struct file *file, char __user *userbuf,
>> + size_t count, loff_t *ppos)
>> +{
>> + struct lp855x *lp = file->private_data;
>> + char buf[10];
>> + unsigned int len;
>> +
>> + len = snprintf(buf, sizeof(buf), "%s\n", lp->chipid);
>> +
>> + if (len > sizeof(buf))
>> + len = sizeof(buf);
> See above.
This function will be moved to the lp855x device attribute.
And snprintf() and sizeof(buf) will be replaced with scnprintf().
>> + return simple_read_from_buffer(userbuf, count, ppos, buf, len);
>> +}
>> +
>> +static ssize_t lp855x_get_bl_mode(struct file *file, char __user *userbuf,
>> + size_t count, loff_t *ppos)
>> +{
>> + char buf[20];
>> + unsigned int len;
>> + char *strmode = NULL;
>> + struct lp855x *lp = file->private_data;
>> + enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
>> +
>> + if (mode == PWM_BASED)
>> + strmode = "pwm based";
>> + else if (mode == REGISTER_BASED)
>> + strmode = "register based";
>> +
>> + len = snprintf(buf, sizeof(buf), "%s\n", strmode);
>> +
>> + if (len > sizeof(buf))
>> + len = sizeof(buf);
> More...
This function also will be moved to the device attribute.
And snprintf() and sizeof(buf) will be replaced with scnprintf().
>> +static void lp855x_create_debugfs(struct lp855x *lp)
>> +{
>> + struct debug_dentry *dd = &lp->dd;
>> +
>> + dd->dir = debugfs_create_dir("lp855x", NULL);
>> +
>> + dd->reg = debugfs_create_file("registers", S_IWUSR | S_IRUGO,
>> + dd->dir, lp, &dbg_registers_fops);
>> +
>> + dd->chip = debugfs_create_file("chip_id", S_IRUGO,
>> + dd->dir, lp, &dbg_chip_fops);
>> +
>> + dd->blmode = debugfs_create_file("bl_ctl_mode", S_IRUGO,
>> + dd->dir, lp, &dbg_blmode_fops);
> Error checking?
Return code should be checked.
But the 'register' node will be removed in new lp855x driver patch.
The 'chip_id' and 'bl_ctl_mode' will be moved to lp855x device attribute.
>> +static void lp855x_init_device(struct lp855x *lp)
>> +{
>> + u8 val, addr;
>> + int i, ret;
>> + struct lp855x_platform_data *pd = lp->pdata;
>> +
>> + val = pd->initial_brightness;
>> + ret = lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
>> +
>> + val = pd->device_control;
>> + ret |= lp855x_write_byte(lp, DEVICE_CTRL, val);
>> +
>> + if (pd->load_new_rom_data && pd->size_program) {
>> + for (i = 0; i < pd->size_program; i++) {
>> + addr = pd->rom_data[i].addr;
>> + val = pd->rom_data[i].val;
>> + if (!lp855x_is_valid_rom_area(lp, addr))
>> + continue;
>> +
>> + ret |= lp855x_write_byte(lp, addr, val);
>> + }
>> + }
>> +
>> + if (ret)
>> + dev_err(lp->dev, "i2c write err\n");
>> +}
> This isn't very good. lp855x_write_byte() can return various -Efoo
> values: -EINVAL, -ENOMEM, etc. But this function can end up
> bitwise-ORing those errnos together, thus producing a completely new
> (and wrong) errno.
> That's not a big problem in this case, because that errno is simply
> dropped on the floor. However it would be more useful if the errno
> were reported to the operator in that dev_err() call.
I totally agree with your opinion.
These return code should not be manipulated and returned on xxx_probe().
It will be fixed in new driver patch.
>> +static int lp855x_backlight_register(struct lp855x *lp)
>> +{
>> + struct backlight_device *bl;
>> + struct backlight_properties props;
>> + const char *name = lp->pdata->name;
>> +
>> + if (!name)
>> + return -ENODEV;
>> +
>> + props.brightness = lp->pdata->initial_brightness;
>> + props.max_brightness =
>> + (lp->pdata->max_brightness < lp->pdata->initial_brightness) ?
>> + 255 : lp->pdata->max_brightness;
>> +
>> + bl = backlight_device_register(name, lp->dev, lp,
>> + &lp855x_bl_ops, &props);
>> + if (IS_ERR(bl))
>> + return -EIO;
> If `lb' contains an errno, we should return that errno to the caller
> rather than unconditionally overwriting it with -EIO?
That code will be changed below.
If (IS_ERR(bl))
return PTR_ERR(bl);
I appreciate your help and detailed advice.
Updated lp855x driver will be patched as [PATCH v2].
Thanks & BR
Milo -
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH] backlight: add new lp855x backlight driver
[not found] ` <B567DBAB974C0544994013492B949F8E381271028A@EXMAIL03.scwf.nsc.com>
2011-12-11 16:12 ` [PATCH] backlight: add new lp855x backlight driver Kim, Milo
2012-01-06 7:00 ` Kim, Milo
@ 2012-01-17 4:04 ` Kim, Milo
2012-01-17 4:06 ` Kim, Milo
2 siblings, 1 reply; 6+ messages in thread
From: Kim, Milo @ 2012-01-17 4:04 UTC (permalink / raw)
To: Kim, Milo, linux-kernel, rchard.purdie; +Cc: Kim, Milo
(a) add MODULE_DEVICE_TABLE() for module lp855x
(b) For better readability, code of lp855x_platform_data can be shortened.
: lp->pdata => pdata
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
drivers/video/backlight/lp855x_bl.c | 11 +++++++----
1 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 7a2d891..21fc267 100755
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -358,15 +358,16 @@ static int lp855x_backlight_register(struct lp855x *lp)
{
struct backlight_device *bl;
struct backlight_properties props;
- const char *name = lp->pdata->name;
+ struct lp855x_platform_data *pdata = lp->pdata;
+ const char *name = pdata->name;
if (!name)
return -ENODEV;
- props.brightness = lp->pdata->initial_brightness;
+ props.brightness = pdata->initial_brightness;
props.max_brightness =
- (lp->pdata->max_brightness < lp->pdata->initial_brightness) ?
- 255 : lp->pdata->max_brightness;
+ (pdata->max_brightness < pdata->initial_brightness) ?
+ 255 : pdata->max_brightness;
bl = backlight_device_register(name, lp->dev, lp,
&lp855x_bl_ops, &props);
@@ -445,7 +446,9 @@ static const struct i2c_device_id lp855x_ids[] = {
{"lp8552", LP8552},
{"lp8553", LP8553},
{"lp8556", LP8556},
+ { }
};
+MODULE_DEVICE_TABLE(i2c, lp855x_ids);
static struct i2c_driver lp855x_driver = {
.driver = {
--
1.7.4.1
-----Original Message-----
From: Kim, Milo
Sent: Friday, January 06, 2012 4:00 PM
To: 'linux-kernel@vger.kernel.org'; 'rchard.purdie@linuxfoundation.org'
Cc: 'milo.kim@ti.com'
Subject: [PATCH] backlight: add new lp855x backlight driver
This patch supports TI LP8550/LP8551/LP8852/LP8553/LP8556 backlight driver.
The brightness can be controlled by the I2C or PWM input.
The lp855x driver provides both modes.
For the PWM control, pwm-specific functions can be defined in the platform data.
And some information can be read via the debugfs.
For the details, please refer to 'Documentation/backlight/lp855x-driver.txt'.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
Documentation/backlight/lp855x-driver.txt | 89 ++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/lp855x_bl.c | 474 +++++++++++++++++++++++++++++
include/linux/lp855x.h | 133 ++++++++
5 files changed, 704 insertions(+), 0 deletions(-)
create mode 100644 Documentation/backlight/lp855x-driver.txt
create mode 100755 drivers/video/backlight/lp855x_bl.c
create mode 100644 include/linux/lp855x.h
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
new file mode 100644
index 0000000..0879c1e
--- /dev/null
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -0,0 +1,89 @@
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+ Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+Brightness can be controlled by the pwm input or the i2c command.
+The lp855x driver supports both cases.
+
+* Debugfs nodes
+
+For debug information, 3 files are exported in the debugfs.
+
+1) bl_ctl_mode
+Backlight control mode.
+Value : pwm based or register based
+
+2) chip_id
+The lp855x chip id.
+Value : lp8550/lp8551/lp8552/lp8553/lp8556
+
+3) registers
+We can control the lp855x registers via the debugfs.
+Read/Write/Dump mode are supported.
+
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name : Backlight driver name.
+* mode : Brightness control mode. PWM or register based.
+* device_control : Value of DEVICE CONTROL register.
+* initial_brightness : Initial value of backlight brightness.
+* max_brightness : Maximum value of backlight brightness.
+* pwm_data : Platform specific pwm generation functions.
+ Only valid when brightness is pwm input mode.
+ Functions should be implemented by PWM driver.
+ - pwm_set_intensity() : set duty of PWM
+ - pwm_get_intensity() : get current duty of PWM
+* load_new_rom_data :
+ 0 : use default configuration data
+ 1 : update values of eeprom or eprom registers on loading driver
+* size_program : Total size of lp855x_rom_data.
+* rom_data : List of new eeprom/eprom registers.
+
+example 1) lp8552 platform data : i2c register mode with new eeprom data
+
+#define EEPROM_A5_ADDR 0xA5
+#define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */
+
+static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+ {EEPROM_A5_ADDR, EEPROM_A5_VAL},
+};
+
+static struct lp855x_platform_data lp8552_pdata = {
+ .name = "lcd-backlight",
+ .mode = REGISTER_BASED,
+ .device_control = I2C_CONFIG(LP8552),
+ .initial_brightness = INITIAL_BRT,
+ .max_brightness = MAX_BRT,
+ .load_new_rom_data = 1,
+ .size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+ .rom_data = lp8552_eeprom_arr,
+};
+
+example 2) lp8556 platform data : pwm input mode with default rom data
+
+static struct lp855x_platform_data lp8556_pdata = {
+ .name = "lcd-backlight",
+ .mode = PWM_BASED,
+ .device_control = PWM_CONFIG(LP8556),
+ .initial_brightness = INITIAL_BRT,
+ .max_brightness = MAX_BRT,
+ .pwm_data = {
+ .pwm_set_intensity = platform_pwm_set_intensity,
+ .pwm_get_intensity = platform_pwm_get_intensity,
+ },
+};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 278aeaa..4d98c2a 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -342,6 +342,13 @@ config BACKLIGHT_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
backlight driver.
+config BACKLIGHT_LP855X
+ tristate "Backlight driver for Texas Instruments LP855X"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ help
+ This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
+ backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE
endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fdd1fc4..91ae232 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -39,4 +39,5 @@ obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
+obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
new file mode 100755
index 0000000..7a2d891
--- /dev/null
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -0,0 +1,474 @@
+/*
+ * TI LP855x Backlight Driver
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/lp855x.h>
+
+#define BRIGHTNESS_CTRL (0x00)
+#define DEVICE_CTRL (0x01)
+
+#ifdef CONFIG_DEBUG_FS
+struct debug_dentry {
+ struct dentry *dir;
+ struct dentry *reg;
+ struct dentry *chip;
+ struct dentry *blmode;
+};
+#endif
+
+struct lp855x {
+ const char *chipid;
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct device *dev;
+ struct mutex xfer_lock;
+ struct lp855x_platform_data *pdata;
+#ifdef CONFIG_DEBUG_FS
+ struct debug_dentry dd;
+#endif
+};
+
+static int lp855x_i2c_read(struct lp855x *lp, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&lp->xfer_lock);
+ ret = i2c_smbus_read_i2c_block_data(lp->client, reg, len, data);
+ mutex_unlock(&lp->xfer_lock);
+
+ return (ret != len) ? -EIO : 0;
+}
+
+static int lp855x_i2c_write(struct lp855x *lp, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&lp->xfer_lock);
+ ret = i2c_smbus_write_i2c_block_data(lp->client, reg, len, data);
+ mutex_unlock(&lp->xfer_lock);
+
+ return ret;
+}
+
+static inline int lp855x_read_byte(struct lp855x *lp, u8 reg, u8 *data)
+{
+ return lp855x_i2c_read(lp, reg, data, 1);
+}
+
+static inline int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
+{
+ u8 written = data;
+ return lp855x_i2c_write(lp, reg, &written, 1);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int lp855x_dbg_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t lp855x_help_register(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[320];
+ unsigned int len;
+ const char *help = "\n How to read/write LP855x registers\n\n \
+ (example) To read 0x00 register,\n \
+ echo 0x00 r > /sys/kernel/debug/lp855x/registers\n \
+ To write 0xff into 0x1 address,\n \
+ echo 0x00 0xff w > /sys/kernel/debug/lp855x/registers \n \
+ To dump values from 0x00 to 0x06 address,\n \
+ echo 0x00 0x06 d > /sys/kernel/debug/lp855x/registers\n";
+
+ len = snprintf(buf, sizeof(buf), "%s\n", help);
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static char *lp855x_parse_register_cmd(const char *cmd, u8 *byte)
+{
+ char tmp[10];
+ char *blank;
+ unsigned long arg;
+
+ blank = strchr(cmd, ' ');
+ memset(tmp, 0x0, sizeof(tmp));
+ memcpy(tmp, cmd, blank - cmd);
+
+ if (strict_strtol(tmp, 16, &arg) < 0)
+ return NULL;
+
+ *byte = arg;
+ return blank;
+}
+
+static ssize_t lp855x_ctrl_register(struct file *file,
+ const char __user *userbuf, size_t count,
+ loff_t *ppos)
+{
+ char mode, buf[20];
+ char *pos, *pos2;
+ u8 i, arg1, arg2, val;
+ struct lp855x *lp = file->private_data;
+
+ if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
+ return -EFAULT;
+
+ mode = buf[count - 2];
+ switch (mode) {
+ case 'r':
+ if (!lp855x_parse_register_cmd(buf, &arg1))
+ return -EINVAL;
+
+ lp855x_read_byte(lp, arg1, &val);
+ dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", arg1, val);
+ break;
+ case 'w':
+ pos = lp855x_parse_register_cmd(buf, &arg1);
+ if (!pos)
+ return -EINVAL;
+ pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
+ if (!pos2)
+ return -EINVAL;
+
+ lp855x_write_byte(lp, arg1, arg2);
+ dev_info(lp->dev, "Written [0x%.2x] = 0x%.2x\n", arg1, arg2);
+ break;
+ case 'd':
+ pos = lp855x_parse_register_cmd(buf, &arg1);
+ if (!pos)
+ return -EINVAL;
+ pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
+ if (!pos2)
+ return -EINVAL;
+
+ for (i = arg1; i <= arg2; i++) {
+ lp855x_read_byte(lp, i, &val);
+ dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", i, val);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return count;
+}
+
+static ssize_t lp855x_get_chipid(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct lp855x *lp = file->private_data;
+ char buf[10];
+ unsigned int len;
+
+ len = snprintf(buf, sizeof(buf), "%s\n", lp->chipid);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static ssize_t lp855x_get_bl_mode(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[20];
+ unsigned int len;
+ char *strmode = NULL;
+ struct lp855x *lp = file->private_data;
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (mode == PWM_BASED)
+ strmode = "pwm based";
+ else if (mode == REGISTER_BASED)
+ strmode = "register based";
+
+ len = snprintf(buf, sizeof(buf), "%s\n", strmode);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+#define LP855X_DBG_ENTRY(name, pread, pwrite) \
+static const struct file_operations dbg_##name##_fops = { \
+ .open = lp855x_dbg_open, \
+ .read = pread, \
+ .write = pwrite, \
+ .owner = THIS_MODULE, \
+ .llseek = default_llseek, \
+}
+
+LP855X_DBG_ENTRY(registers, lp855x_help_register, lp855x_ctrl_register);
+LP855X_DBG_ENTRY(chip, lp855x_get_chipid, NULL);
+LP855X_DBG_ENTRY(blmode, lp855x_get_bl_mode, NULL);
+
+static void lp855x_create_debugfs(struct lp855x *lp)
+{
+ struct debug_dentry *dd = &lp->dd;
+
+ dd->dir = debugfs_create_dir("lp855x", NULL);
+
+ dd->reg = debugfs_create_file("registers", S_IWUSR | S_IRUGO,
+ dd->dir, lp, &dbg_registers_fops);
+
+ dd->chip = debugfs_create_file("chip_id", S_IRUGO,
+ dd->dir, lp, &dbg_chip_fops);
+
+ dd->blmode = debugfs_create_file("bl_ctl_mode", S_IRUGO,
+ dd->dir, lp, &dbg_blmode_fops);
+}
+
+static void lp855x_remove_debugfs(struct lp855x *lp)
+{
+ struct debug_dentry *dd = &lp->dd;
+
+ debugfs_remove(dd->blmode);
+ debugfs_remove(dd->chip);
+ debugfs_remove(dd->reg);
+ debugfs_remove(dd->dir);
+}
+#else
+static inline void lp855x_create_debugfs(struct lp855x *lp)
+{
+ return;
+}
+
+static inline void lp855x_remove_debugfs(struct lp855x *lp)
+{
+ return;
+}
+#endif
+
+static int lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
+{
+ const char *id = lp->chipid;
+ u8 start, end;
+
+ if (strstr(id, "lp8550") || strstr(id, "lp8551")
+ || strstr(id, "lp8552") || strstr(id, "lp8553")) {
+ start = EEPROM_START;
+ end = EEPROM_END;
+ } else if (strstr(id, "lp8556")) {
+ start = EPROM_START;
+ end = EPROM_END;
+ }
+
+ return (addr >= start && addr <= end) ? 1 : 0;
+}
+
+static void lp855x_init_device(struct lp855x *lp)
+{
+ u8 val, addr;
+ int i, ret;
+ struct lp855x_platform_data *pd = lp->pdata;
+
+ val = pd->initial_brightness;
+ ret = lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+
+ val = pd->device_control;
+ ret |= lp855x_write_byte(lp, DEVICE_CTRL, val);
+
+ if (pd->load_new_rom_data && pd->size_program) {
+ for (i = 0; i < pd->size_program; i++) {
+ addr = pd->rom_data[i].addr;
+ val = pd->rom_data[i].val;
+ if (!lp855x_is_valid_rom_area(lp, addr))
+ continue;
+
+ ret |= lp855x_write_byte(lp, addr, val);
+ }
+ }
+
+ if (ret)
+ dev_err(lp->dev, "i2c write err\n");
+}
+
+static int lp855x_bl_update_status(struct backlight_device *bl)
+{
+ struct lp855x *lp = bl_get_data(bl);
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (bl->props.state & BL_CORE_SUSPENDED)
+ bl->props.brightness = 0;
+
+ if (mode == PWM_BASED) {
+ struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+ int br = bl->props.brightness;
+ int max_br = bl->props.max_brightness;
+
+ if (pd->pwm_set_intensity)
+ pd->pwm_set_intensity(br, max_br);
+
+ } else if (mode == REGISTER_BASED) {
+ u8 val = bl->props.brightness;
+ lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+ }
+
+ return (bl->props.brightness);
+}
+
+static int lp855x_bl_get_brightness(struct backlight_device *bl)
+{
+ struct lp855x *lp = bl_get_data(bl);
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (mode == PWM_BASED) {
+ struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+ int max_br = bl->props.max_brightness;
+
+ if (pd->pwm_get_intensity)
+ bl->props.brightness = pd->pwm_get_intensity(max_br);
+
+ } else if (mode == REGISTER_BASED) {
+ u8 val;
+
+ lp855x_read_byte(lp, BRIGHTNESS_CTRL, &val);
+ bl->props.brightness = val;
+ }
+
+ return (bl->props.brightness);
+}
+
+static const struct backlight_ops lp855x_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = lp855x_bl_update_status,
+ .get_brightness = lp855x_bl_get_brightness,
+};
+
+static int lp855x_backlight_register(struct lp855x *lp)
+{
+ struct backlight_device *bl;
+ struct backlight_properties props;
+ const char *name = lp->pdata->name;
+
+ if (!name)
+ return -ENODEV;
+
+ props.brightness = lp->pdata->initial_brightness;
+ props.max_brightness =
+ (lp->pdata->max_brightness < lp->pdata->initial_brightness) ?
+ 255 : lp->pdata->max_brightness;
+
+ bl = backlight_device_register(name, lp->dev, lp,
+ &lp855x_bl_ops, &props);
+ if (IS_ERR(bl))
+ return -EIO;
+
+ lp->bl = bl;
+
+ return 0;
+}
+
+static void lp855x_backlight_unregister(struct lp855x *lp)
+{
+ if (lp->bl)
+ backlight_device_unregister(lp->bl);
+}
+
+static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+ struct lp855x *lp;
+ struct lp855x_platform_data *pdata = cl->dev.platform_data;
+ int ret;
+
+ if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ goto err_io;
+
+ lp = kzalloc(sizeof(struct lp855x), GFP_KERNEL);
+ if (!lp)
+ goto err_mem;
+
+ lp->client = cl;
+ lp->dev = &cl->dev;
+ lp->pdata = pdata;
+ lp->chipid = id->name;
+ i2c_set_clientdata(cl, lp);
+
+ mutex_init(&lp->xfer_lock);
+
+ lp855x_init_device(lp);
+ ret = lp855x_backlight_register(lp);
+ if (ret)
+ goto err_dev;
+
+ backlight_update_status(lp->bl);
+ lp855x_create_debugfs(lp);
+
+ return ret;
+
+err_io:
+ return -EIO;
+err_mem:
+ return -ENOMEM;
+err_dev:
+ dev_err(lp->dev, "can not register backlight device. errcode = %d\n",
+ ret);
+ kfree(lp);
+ return ret;
+}
+
+static int __devexit lp855x_remove(struct i2c_client *cl)
+{
+ struct lp855x *lp = i2c_get_clientdata(cl);
+
+ lp->bl->props.brightness = 0;
+ backlight_update_status(lp->bl);
+ lp855x_remove_debugfs(lp);
+ lp855x_backlight_unregister(lp);
+ kfree(lp);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp855x_ids[] = {
+ {"lp8550", LP8550},
+ {"lp8551", LP8551},
+ {"lp8552", LP8552},
+ {"lp8553", LP8553},
+ {"lp8556", LP8556},
+};
+
+static struct i2c_driver lp855x_driver = {
+ .driver = {
+ .name = "lp855x",
+ },
+ .probe = lp855x_probe,
+ .remove = __devexit_p(lp855x_remove),
+ .id_table = lp855x_ids,
+};
+
+static int __init lp855x_init(void)
+{
+ return i2c_add_driver(&lp855x_driver);
+}
+
+static void __exit lp855x_exit(void)
+{
+ i2c_del_driver(&lp855x_driver);
+}
+
+module_init(lp855x_init);
+module_exit(lp855x_exit);
+
+MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>, Dainel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h
new file mode 100644
index 0000000..16e2474
--- /dev/null
+++ b/include/linux/lp855x.h
@@ -0,0 +1,133 @@
+/*
+ * lp855x.h - TI LP8556 Backlight Driver
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP855X_H
+#define _LP855X_H
+
+#define BL_CTL_SHFT (0)
+#define BRT_MODE_SHFT (1)
+#define BRT_MODE_MASK (0x06)
+
+/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
+#define ENABLE_BL (1)
+#define DISABLE_BL (0)
+
+#define I2C_CONFIG(id) id ## _I2C_CONFIG
+#define PWM_CONFIG(id) id ## _PWM_CONFIG
+
+/* DEVICE CONTROL register - LP8550 */
+#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \
+ (LP8550_I2C_ONLY << BRT_MODE_SHFT))
+
+/* DEVICE CONTROL register - LP8551 */
+#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8552 */
+#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8553 */
+#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8556 */
+#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT)
+#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \
+ (LP8556_I2C_ONLY << BRT_MODE_SHFT))
+#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT)
+
+/* ROM area boundary */
+#define EEPROM_START (0xA0)
+#define EEPROM_END (0xA7)
+#define EPROM_START (0xA0)
+#define EPROM_END (0xAF)
+
+enum lp855x_chip_id {
+ LP8550,
+ LP8551,
+ LP8552,
+ LP8553,
+ LP8556,
+};
+
+enum lp855x_brightness_ctrl_mode {
+ PWM_BASED = 1,
+ REGISTER_BASED,
+};
+
+enum lp8550_brighntess_source {
+ LP8550_PWM_ONLY,
+ LP8550_I2C_ONLY = 2,
+};
+
+enum lp8551_brighntess_source {
+ LP8551_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8551_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8552_brighntess_source {
+ LP8552_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8552_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8553_brighntess_source {
+ LP8553_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8553_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8556_brightness_source {
+ LP8556_PWM_ONLY,
+ LP8556_COMBINED1, /* pwm + i2c before the shaper block */
+ LP8556_I2C_ONLY,
+ LP8556_COMBINED2, /* pwm + i2c after the shaper block */
+};
+
+struct lp855x_pwm_data {
+ void (*pwm_set_intensity) (int brightness, int max_brightness);
+ int (*pwm_get_intensity) (int max_brightness);
+};
+
+struct lp855x_rom_data {
+ u8 addr;
+ u8 val;
+};
+
+/**
+ * struct lp855x_platform_data
+ * @name : backlight driver name
+ * @mode : brightness control by pwm or lp855x register
+ * @device_control : value of DEVICE CONTROL register
+ * @initial_brightness : initial value of backlight brightness
+ * @max_brightness : maximum value of backlight brightness
+ * @pwm_data : platform specific pwm generation functions.
+ Only valid when mode is PWM_BASED.
+ * @load_new_rom_data :
+ 0 : use default configuration data
+ 1 : update values of eeprom or eprom registers on loading driver
+ * @size_program : total size of lp855x_rom_data
+ * @rom_data : list of new eeprom/eprom registers
+ */
+struct lp855x_platform_data {
+ const char *name;
+ enum lp855x_brightness_ctrl_mode mode;
+ u8 device_control;
+ int initial_brightness;
+ int max_brightness;
+ struct lp855x_pwm_data pwm_data;
+ u8 load_new_rom_data;
+ int size_program;
+ struct lp855x_rom_data *rom_data;
+};
+
+#endif
--
1.7.4.1
Best Regards
Milo (Woogyom) Kim
Texas Instruments Incorporated
^ permalink raw reply [flat|nested] 6+ messages in thread* RE: [PATCH] backlight: add new lp855x backlight driver
2012-01-17 4:04 ` Kim, Milo
@ 2012-01-17 4:06 ` Kim, Milo
0 siblings, 0 replies; 6+ messages in thread
From: Kim, Milo @ 2012-01-17 4:06 UTC (permalink / raw)
To: linux-kernel, rpurdie; +Cc: Kim, Milo
The lp855x backlight type is defined as BACKLIGHT_PLATFORM.
This patch is only valid when the kernel version is 2.6.39 or higher.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
drivers/video/backlight/lp855x_bl.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 21fc267..367d1dc 100755
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -364,6 +364,7 @@ static int lp855x_backlight_register(struct lp855x *lp)
if (!name)
return -ENODEV;
+ props.type = BACKLIGHT_PLATFORM;
props.brightness = pdata->initial_brightness;
props.max_brightness =
(pdata->max_brightness < pdata->initial_brightness) ?
--
1.7.4.1
-----Original Message-----
From: Kim, Milo
Sent: Tuesday, January 17, 2012 1:05 PM
To: Kim, Milo; linux-kernel@vger.kernel.org; rchard.purdie@linuxfoundation.org
Cc: Kim, Milo
Subject: RE: [PATCH] backlight: add new lp855x backlight driver
(a) add MODULE_DEVICE_TABLE() for module lp855x
(b) For better readability, code of lp855x_platform_data can be shortened.
: lp->pdata => pdata
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
drivers/video/backlight/lp855x_bl.c | 11 +++++++----
1 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 7a2d891..21fc267 100755
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -358,15 +358,16 @@ static int lp855x_backlight_register(struct lp855x *lp)
{
struct backlight_device *bl;
struct backlight_properties props;
- const char *name = lp->pdata->name;
+ struct lp855x_platform_data *pdata = lp->pdata;
+ const char *name = pdata->name;
if (!name)
return -ENODEV;
- props.brightness = lp->pdata->initial_brightness;
+ props.brightness = pdata->initial_brightness;
props.max_brightness =
- (lp->pdata->max_brightness < lp->pdata->initial_brightness) ?
- 255 : lp->pdata->max_brightness;
+ (pdata->max_brightness < pdata->initial_brightness) ?
+ 255 : pdata->max_brightness;
bl = backlight_device_register(name, lp->dev, lp,
&lp855x_bl_ops, &props);
@@ -445,7 +446,9 @@ static const struct i2c_device_id lp855x_ids[] = {
{"lp8552", LP8552},
{"lp8553", LP8553},
{"lp8556", LP8556},
+ { }
};
+MODULE_DEVICE_TABLE(i2c, lp855x_ids);
static struct i2c_driver lp855x_driver = {
.driver = {
--
1.7.4.1
-----Original Message-----
From: Kim, Milo
Sent: Friday, January 06, 2012 4:00 PM
To: 'linux-kernel@vger.kernel.org'; 'rchard.purdie@linuxfoundation.org'
Cc: 'milo.kim@ti.com'
Subject: [PATCH] backlight: add new lp855x backlight driver
This patch supports TI LP8550/LP8551/LP8852/LP8553/LP8556 backlight driver.
The brightness can be controlled by the I2C or PWM input.
The lp855x driver provides both modes.
For the PWM control, pwm-specific functions can be defined in the platform data.
And some information can be read via the debugfs.
For the details, please refer to 'Documentation/backlight/lp855x-driver.txt'.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
Documentation/backlight/lp855x-driver.txt | 89 ++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/lp855x_bl.c | 474 +++++++++++++++++++++++++++++
include/linux/lp855x.h | 133 ++++++++
5 files changed, 704 insertions(+), 0 deletions(-)
create mode 100644 Documentation/backlight/lp855x-driver.txt
create mode 100755 drivers/video/backlight/lp855x_bl.c
create mode 100644 include/linux/lp855x.h
diff --git a/Documentation/backlight/lp855x-driver.txt b/Documentation/backlight/lp855x-driver.txt
new file mode 100644
index 0000000..0879c1e
--- /dev/null
+++ b/Documentation/backlight/lp855x-driver.txt
@@ -0,0 +1,89 @@
+Kernel driver lp855x
+====================
+
+Backlight driver for LP855x ICs
+
+Supported chips:
+ Texas Instruments LP8550, LP8551, LP8552, LP8553 and LP8556
+
+Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+
+Description
+-----------
+
+* Brightness control
+
+Brightness can be controlled by the pwm input or the i2c command.
+The lp855x driver supports both cases.
+
+* Debugfs nodes
+
+For debug information, 3 files are exported in the debugfs.
+
+1) bl_ctl_mode
+Backlight control mode.
+Value : pwm based or register based
+
+2) chip_id
+The lp855x chip id.
+Value : lp8550/lp8551/lp8552/lp8553/lp8556
+
+3) registers
+We can control the lp855x registers via the debugfs.
+Read/Write/Dump mode are supported.
+
+
+Platform data for lp855x
+------------------------
+
+For supporting platform specific data, the lp855x platform data can be used.
+
+* name : Backlight driver name.
+* mode : Brightness control mode. PWM or register based.
+* device_control : Value of DEVICE CONTROL register.
+* initial_brightness : Initial value of backlight brightness.
+* max_brightness : Maximum value of backlight brightness.
+* pwm_data : Platform specific pwm generation functions.
+ Only valid when brightness is pwm input mode.
+ Functions should be implemented by PWM driver.
+ - pwm_set_intensity() : set duty of PWM
+ - pwm_get_intensity() : get current duty of PWM
+* load_new_rom_data :
+ 0 : use default configuration data
+ 1 : update values of eeprom or eprom registers on loading driver
+* size_program : Total size of lp855x_rom_data.
+* rom_data : List of new eeprom/eprom registers.
+
+example 1) lp8552 platform data : i2c register mode with new eeprom data
+
+#define EEPROM_A5_ADDR 0xA5
+#define EEPROM_A5_VAL 0x4f /* EN_VSYNC=0 */
+
+static struct lp855x_rom_data lp8552_eeprom_arr[] = {
+ {EEPROM_A5_ADDR, EEPROM_A5_VAL},
+};
+
+static struct lp855x_platform_data lp8552_pdata = {
+ .name = "lcd-backlight",
+ .mode = REGISTER_BASED,
+ .device_control = I2C_CONFIG(LP8552),
+ .initial_brightness = INITIAL_BRT,
+ .max_brightness = MAX_BRT,
+ .load_new_rom_data = 1,
+ .size_program = ARRAY_SIZE(lp8552_eeprom_arr),
+ .rom_data = lp8552_eeprom_arr,
+};
+
+example 2) lp8556 platform data : pwm input mode with default rom data
+
+static struct lp855x_platform_data lp8556_pdata = {
+ .name = "lcd-backlight",
+ .mode = PWM_BASED,
+ .device_control = PWM_CONFIG(LP8556),
+ .initial_brightness = INITIAL_BRT,
+ .max_brightness = MAX_BRT,
+ .pwm_data = {
+ .pwm_set_intensity = platform_pwm_set_intensity,
+ .pwm_get_intensity = platform_pwm_get_intensity,
+ },
+};
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 278aeaa..4d98c2a 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -342,6 +342,13 @@ config BACKLIGHT_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
backlight driver.
+config BACKLIGHT_LP855X
+ tristate "Backlight driver for Texas Instruments LP855X"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ help
+ This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556
+ backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE
endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index fdd1fc4..91ae232 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -39,4 +39,5 @@ obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o
+obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
new file mode 100755
index 0000000..7a2d891
--- /dev/null
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -0,0 +1,474 @@
+/*
+ * TI LP855x Backlight Driver
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/lp855x.h>
+
+#define BRIGHTNESS_CTRL (0x00)
+#define DEVICE_CTRL (0x01)
+
+#ifdef CONFIG_DEBUG_FS
+struct debug_dentry {
+ struct dentry *dir;
+ struct dentry *reg;
+ struct dentry *chip;
+ struct dentry *blmode;
+};
+#endif
+
+struct lp855x {
+ const char *chipid;
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct device *dev;
+ struct mutex xfer_lock;
+ struct lp855x_platform_data *pdata;
+#ifdef CONFIG_DEBUG_FS
+ struct debug_dentry dd;
+#endif
+};
+
+static int lp855x_i2c_read(struct lp855x *lp, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&lp->xfer_lock);
+ ret = i2c_smbus_read_i2c_block_data(lp->client, reg, len, data);
+ mutex_unlock(&lp->xfer_lock);
+
+ return (ret != len) ? -EIO : 0;
+}
+
+static int lp855x_i2c_write(struct lp855x *lp, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&lp->xfer_lock);
+ ret = i2c_smbus_write_i2c_block_data(lp->client, reg, len, data);
+ mutex_unlock(&lp->xfer_lock);
+
+ return ret;
+}
+
+static inline int lp855x_read_byte(struct lp855x *lp, u8 reg, u8 *data)
+{
+ return lp855x_i2c_read(lp, reg, data, 1);
+}
+
+static inline int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data)
+{
+ u8 written = data;
+ return lp855x_i2c_write(lp, reg, &written, 1);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int lp855x_dbg_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t lp855x_help_register(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[320];
+ unsigned int len;
+ const char *help = "\n How to read/write LP855x registers\n\n \
+ (example) To read 0x00 register,\n \
+ echo 0x00 r > /sys/kernel/debug/lp855x/registers\n \
+ To write 0xff into 0x1 address,\n \
+ echo 0x00 0xff w > /sys/kernel/debug/lp855x/registers \n \
+ To dump values from 0x00 to 0x06 address,\n \
+ echo 0x00 0x06 d > /sys/kernel/debug/lp855x/registers\n";
+
+ len = snprintf(buf, sizeof(buf), "%s\n", help);
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static char *lp855x_parse_register_cmd(const char *cmd, u8 *byte)
+{
+ char tmp[10];
+ char *blank;
+ unsigned long arg;
+
+ blank = strchr(cmd, ' ');
+ memset(tmp, 0x0, sizeof(tmp));
+ memcpy(tmp, cmd, blank - cmd);
+
+ if (strict_strtol(tmp, 16, &arg) < 0)
+ return NULL;
+
+ *byte = arg;
+ return blank;
+}
+
+static ssize_t lp855x_ctrl_register(struct file *file,
+ const char __user *userbuf, size_t count,
+ loff_t *ppos)
+{
+ char mode, buf[20];
+ char *pos, *pos2;
+ u8 i, arg1, arg2, val;
+ struct lp855x *lp = file->private_data;
+
+ if (copy_from_user(buf, userbuf, min(count, sizeof(buf))))
+ return -EFAULT;
+
+ mode = buf[count - 2];
+ switch (mode) {
+ case 'r':
+ if (!lp855x_parse_register_cmd(buf, &arg1))
+ return -EINVAL;
+
+ lp855x_read_byte(lp, arg1, &val);
+ dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", arg1, val);
+ break;
+ case 'w':
+ pos = lp855x_parse_register_cmd(buf, &arg1);
+ if (!pos)
+ return -EINVAL;
+ pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
+ if (!pos2)
+ return -EINVAL;
+
+ lp855x_write_byte(lp, arg1, arg2);
+ dev_info(lp->dev, "Written [0x%.2x] = 0x%.2x\n", arg1, arg2);
+ break;
+ case 'd':
+ pos = lp855x_parse_register_cmd(buf, &arg1);
+ if (!pos)
+ return -EINVAL;
+ pos2 = lp855x_parse_register_cmd(pos + 1, &arg2);
+ if (!pos2)
+ return -EINVAL;
+
+ for (i = arg1; i <= arg2; i++) {
+ lp855x_read_byte(lp, i, &val);
+ dev_info(lp->dev, "Read [0x%.2x] = 0x%.2x\n", i, val);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return count;
+}
+
+static ssize_t lp855x_get_chipid(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct lp855x *lp = file->private_data;
+ char buf[10];
+ unsigned int len;
+
+ len = snprintf(buf, sizeof(buf), "%s\n", lp->chipid);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static ssize_t lp855x_get_bl_mode(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ char buf[20];
+ unsigned int len;
+ char *strmode = NULL;
+ struct lp855x *lp = file->private_data;
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (mode == PWM_BASED)
+ strmode = "pwm based";
+ else if (mode == REGISTER_BASED)
+ strmode = "register based";
+
+ len = snprintf(buf, sizeof(buf), "%s\n", strmode);
+
+ if (len > sizeof(buf))
+ len = sizeof(buf);
+
+ return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+#define LP855X_DBG_ENTRY(name, pread, pwrite) \
+static const struct file_operations dbg_##name##_fops = { \
+ .open = lp855x_dbg_open, \
+ .read = pread, \
+ .write = pwrite, \
+ .owner = THIS_MODULE, \
+ .llseek = default_llseek, \
+}
+
+LP855X_DBG_ENTRY(registers, lp855x_help_register, lp855x_ctrl_register);
+LP855X_DBG_ENTRY(chip, lp855x_get_chipid, NULL);
+LP855X_DBG_ENTRY(blmode, lp855x_get_bl_mode, NULL);
+
+static void lp855x_create_debugfs(struct lp855x *lp)
+{
+ struct debug_dentry *dd = &lp->dd;
+
+ dd->dir = debugfs_create_dir("lp855x", NULL);
+
+ dd->reg = debugfs_create_file("registers", S_IWUSR | S_IRUGO,
+ dd->dir, lp, &dbg_registers_fops);
+
+ dd->chip = debugfs_create_file("chip_id", S_IRUGO,
+ dd->dir, lp, &dbg_chip_fops);
+
+ dd->blmode = debugfs_create_file("bl_ctl_mode", S_IRUGO,
+ dd->dir, lp, &dbg_blmode_fops);
+}
+
+static void lp855x_remove_debugfs(struct lp855x *lp)
+{
+ struct debug_dentry *dd = &lp->dd;
+
+ debugfs_remove(dd->blmode);
+ debugfs_remove(dd->chip);
+ debugfs_remove(dd->reg);
+ debugfs_remove(dd->dir);
+}
+#else
+static inline void lp855x_create_debugfs(struct lp855x *lp)
+{
+ return;
+}
+
+static inline void lp855x_remove_debugfs(struct lp855x *lp)
+{
+ return;
+}
+#endif
+
+static int lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr)
+{
+ const char *id = lp->chipid;
+ u8 start, end;
+
+ if (strstr(id, "lp8550") || strstr(id, "lp8551")
+ || strstr(id, "lp8552") || strstr(id, "lp8553")) {
+ start = EEPROM_START;
+ end = EEPROM_END;
+ } else if (strstr(id, "lp8556")) {
+ start = EPROM_START;
+ end = EPROM_END;
+ }
+
+ return (addr >= start && addr <= end) ? 1 : 0;
+}
+
+static void lp855x_init_device(struct lp855x *lp)
+{
+ u8 val, addr;
+ int i, ret;
+ struct lp855x_platform_data *pd = lp->pdata;
+
+ val = pd->initial_brightness;
+ ret = lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+
+ val = pd->device_control;
+ ret |= lp855x_write_byte(lp, DEVICE_CTRL, val);
+
+ if (pd->load_new_rom_data && pd->size_program) {
+ for (i = 0; i < pd->size_program; i++) {
+ addr = pd->rom_data[i].addr;
+ val = pd->rom_data[i].val;
+ if (!lp855x_is_valid_rom_area(lp, addr))
+ continue;
+
+ ret |= lp855x_write_byte(lp, addr, val);
+ }
+ }
+
+ if (ret)
+ dev_err(lp->dev, "i2c write err\n");
+}
+
+static int lp855x_bl_update_status(struct backlight_device *bl)
+{
+ struct lp855x *lp = bl_get_data(bl);
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (bl->props.state & BL_CORE_SUSPENDED)
+ bl->props.brightness = 0;
+
+ if (mode == PWM_BASED) {
+ struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+ int br = bl->props.brightness;
+ int max_br = bl->props.max_brightness;
+
+ if (pd->pwm_set_intensity)
+ pd->pwm_set_intensity(br, max_br);
+
+ } else if (mode == REGISTER_BASED) {
+ u8 val = bl->props.brightness;
+ lp855x_write_byte(lp, BRIGHTNESS_CTRL, val);
+ }
+
+ return (bl->props.brightness);
+}
+
+static int lp855x_bl_get_brightness(struct backlight_device *bl)
+{
+ struct lp855x *lp = bl_get_data(bl);
+ enum lp855x_brightness_ctrl_mode mode = lp->pdata->mode;
+
+ if (mode == PWM_BASED) {
+ struct lp855x_pwm_data *pd = &lp->pdata->pwm_data;
+ int max_br = bl->props.max_brightness;
+
+ if (pd->pwm_get_intensity)
+ bl->props.brightness = pd->pwm_get_intensity(max_br);
+
+ } else if (mode == REGISTER_BASED) {
+ u8 val;
+
+ lp855x_read_byte(lp, BRIGHTNESS_CTRL, &val);
+ bl->props.brightness = val;
+ }
+
+ return (bl->props.brightness);
+}
+
+static const struct backlight_ops lp855x_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = lp855x_bl_update_status,
+ .get_brightness = lp855x_bl_get_brightness,
+};
+
+static int lp855x_backlight_register(struct lp855x *lp)
+{
+ struct backlight_device *bl;
+ struct backlight_properties props;
+ const char *name = lp->pdata->name;
+
+ if (!name)
+ return -ENODEV;
+
+ props.brightness = lp->pdata->initial_brightness;
+ props.max_brightness =
+ (lp->pdata->max_brightness < lp->pdata->initial_brightness) ?
+ 255 : lp->pdata->max_brightness;
+
+ bl = backlight_device_register(name, lp->dev, lp,
+ &lp855x_bl_ops, &props);
+ if (IS_ERR(bl))
+ return -EIO;
+
+ lp->bl = bl;
+
+ return 0;
+}
+
+static void lp855x_backlight_unregister(struct lp855x *lp)
+{
+ if (lp->bl)
+ backlight_device_unregister(lp->bl);
+}
+
+static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+ struct lp855x *lp;
+ struct lp855x_platform_data *pdata = cl->dev.platform_data;
+ int ret;
+
+ if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ goto err_io;
+
+ lp = kzalloc(sizeof(struct lp855x), GFP_KERNEL);
+ if (!lp)
+ goto err_mem;
+
+ lp->client = cl;
+ lp->dev = &cl->dev;
+ lp->pdata = pdata;
+ lp->chipid = id->name;
+ i2c_set_clientdata(cl, lp);
+
+ mutex_init(&lp->xfer_lock);
+
+ lp855x_init_device(lp);
+ ret = lp855x_backlight_register(lp);
+ if (ret)
+ goto err_dev;
+
+ backlight_update_status(lp->bl);
+ lp855x_create_debugfs(lp);
+
+ return ret;
+
+err_io:
+ return -EIO;
+err_mem:
+ return -ENOMEM;
+err_dev:
+ dev_err(lp->dev, "can not register backlight device. errcode = %d\n",
+ ret);
+ kfree(lp);
+ return ret;
+}
+
+static int __devexit lp855x_remove(struct i2c_client *cl)
+{
+ struct lp855x *lp = i2c_get_clientdata(cl);
+
+ lp->bl->props.brightness = 0;
+ backlight_update_status(lp->bl);
+ lp855x_remove_debugfs(lp);
+ lp855x_backlight_unregister(lp);
+ kfree(lp);
+
+ return 0;
+}
+
+static const struct i2c_device_id lp855x_ids[] = {
+ {"lp8550", LP8550},
+ {"lp8551", LP8551},
+ {"lp8552", LP8552},
+ {"lp8553", LP8553},
+ {"lp8556", LP8556},
+};
+
+static struct i2c_driver lp855x_driver = {
+ .driver = {
+ .name = "lp855x",
+ },
+ .probe = lp855x_probe,
+ .remove = __devexit_p(lp855x_remove),
+ .id_table = lp855x_ids,
+};
+
+static int __init lp855x_init(void)
+{
+ return i2c_add_driver(&lp855x_driver);
+}
+
+static void __exit lp855x_exit(void)
+{
+ i2c_del_driver(&lp855x_driver);
+}
+
+module_init(lp855x_init);
+module_exit(lp855x_exit);
+
+MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>, Dainel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h
new file mode 100644
index 0000000..16e2474
--- /dev/null
+++ b/include/linux/lp855x.h
@@ -0,0 +1,133 @@
+/*
+ * lp855x.h - TI LP8556 Backlight Driver
+ *
+ * Copyright (C) 2011 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LP855X_H
+#define _LP855X_H
+
+#define BL_CTL_SHFT (0)
+#define BRT_MODE_SHFT (1)
+#define BRT_MODE_MASK (0x06)
+
+/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */
+#define ENABLE_BL (1)
+#define DISABLE_BL (0)
+
+#define I2C_CONFIG(id) id ## _I2C_CONFIG
+#define PWM_CONFIG(id) id ## _PWM_CONFIG
+
+/* DEVICE CONTROL register - LP8550 */
+#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \
+ (LP8550_I2C_ONLY << BRT_MODE_SHFT))
+
+/* DEVICE CONTROL register - LP8551 */
+#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8552 */
+#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8553 */
+#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG
+#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG
+
+/* DEVICE CONTROL register - LP8556 */
+#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT)
+#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT)
+#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \
+ (LP8556_I2C_ONLY << BRT_MODE_SHFT))
+#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT)
+
+/* ROM area boundary */
+#define EEPROM_START (0xA0)
+#define EEPROM_END (0xA7)
+#define EPROM_START (0xA0)
+#define EPROM_END (0xAF)
+
+enum lp855x_chip_id {
+ LP8550,
+ LP8551,
+ LP8552,
+ LP8553,
+ LP8556,
+};
+
+enum lp855x_brightness_ctrl_mode {
+ PWM_BASED = 1,
+ REGISTER_BASED,
+};
+
+enum lp8550_brighntess_source {
+ LP8550_PWM_ONLY,
+ LP8550_I2C_ONLY = 2,
+};
+
+enum lp8551_brighntess_source {
+ LP8551_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8551_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8552_brighntess_source {
+ LP8552_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8552_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8553_brighntess_source {
+ LP8553_PWM_ONLY = LP8550_PWM_ONLY,
+ LP8553_I2C_ONLY = LP8550_I2C_ONLY,
+};
+
+enum lp8556_brightness_source {
+ LP8556_PWM_ONLY,
+ LP8556_COMBINED1, /* pwm + i2c before the shaper block */
+ LP8556_I2C_ONLY,
+ LP8556_COMBINED2, /* pwm + i2c after the shaper block */
+};
+
+struct lp855x_pwm_data {
+ void (*pwm_set_intensity) (int brightness, int max_brightness);
+ int (*pwm_get_intensity) (int max_brightness);
+};
+
+struct lp855x_rom_data {
+ u8 addr;
+ u8 val;
+};
+
+/**
+ * struct lp855x_platform_data
+ * @name : backlight driver name
+ * @mode : brightness control by pwm or lp855x register
+ * @device_control : value of DEVICE CONTROL register
+ * @initial_brightness : initial value of backlight brightness
+ * @max_brightness : maximum value of backlight brightness
+ * @pwm_data : platform specific pwm generation functions.
+ Only valid when mode is PWM_BASED.
+ * @load_new_rom_data :
+ 0 : use default configuration data
+ 1 : update values of eeprom or eprom registers on loading driver
+ * @size_program : total size of lp855x_rom_data
+ * @rom_data : list of new eeprom/eprom registers
+ */
+struct lp855x_platform_data {
+ const char *name;
+ enum lp855x_brightness_ctrl_mode mode;
+ u8 device_control;
+ int initial_brightness;
+ int max_brightness;
+ struct lp855x_pwm_data pwm_data;
+ u8 load_new_rom_data;
+ int size_program;
+ struct lp855x_rom_data *rom_data;
+};
+
+#endif
--
1.7.4.1
Best Regards
Milo (Woogyom) Kim
Texas Instruments Incorporated
^ permalink raw reply [flat|nested] 6+ messages in thread