[PATCH v3] mfd/ab8500: print switch off cause

[PATCH v3] mfd/ab8500: print switch off cause

[Linus Walleij]

From: Jonas Aaberg <jonas.aberg@stericsson.com>

Instead of just printing the register value, also output some
description of the value.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Use printk() with KERN_CONT instead of separate dev_* or
  printk() calls. (Review comment from Joe Perches.)
ChangeLog v1->v2:
- Print each cause on its own line with a tab to avoid missing
  initial cause heading if loglevel < info.
---
 drivers/mfd/ab8500-core.c |   25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index dac0e29..279bdeb 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1217,6 +1217,15 @@ static const struct of_device_id ab8500_match[] = {
 
 static int __devinit ab8500_probe(struct platform_device *pdev)
 {
+	static char *switch_off_status[] = {
+		"Swoff bit programming",
+		"Thermal protection activation",
+		"Vbat lower then BattOk falling threshold",
+		"Watchdog expired",
+		"Non presence of 32kHz clock",
+		"Battery level lower than power on reset threshold",
+		"Power on key 1 pressed longer than 10 seconds",
+		"DB8500 thermal shutdown"};
 	struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
 	const struct platform_device_id *platid = platform_get_device_id(pdev);
 	enum ab8500_version version = AB8500_VERSION_UNDEFINED;
@@ -1323,7 +1332,21 @@ static int __devinit ab8500_probe(struct platform_device *pdev)
 		AB8500_SWITCH_OFF_STATUS, &value);
 	if (ret < 0)
 		return ret;
-	dev_info(ab8500->dev, "switch off status: %#x", value);
+	dev_info(ab8500->dev, "switch off cause(s) (%#x): ", value);
+
+	if (value) {
+		for (i = 0; i < ARRAY_SIZE(switch_off_status); i++) {
+			if (value & 1)
+				printk(KERN_CONT " \"%s\"",
+				       switch_off_status[i]);
+			value = value >> 1;
+
+		}
+		printk(KERN_CONT "\n");
+	} else {
+		printk(KERN_CONT " None\n");
+	}
+
 
 	if (plat && plat->init)
 		plat->init(ab8500);
-- 
1.7.9.2

Re: [PATCH v3] mfd/ab8500: print switch off cause

[Samuel Ortiz]

Hi Linus,

On Tue, Jun 05, 2012 at 10:11:34AM +0200, Linus Walleij wrote:
> From: Jonas Aaberg <jonas.aberg@stericsson.com>
> 
> Instead of just printing the register value, also output some
> description of the value.
> 
> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v2->v3:
> - Use printk() with KERN_CONT instead of separate dev_* or
>   printk() calls. (Review comment from Joe Perches.)
> ChangeLog v1->v2:
> - Print each cause on its own line with a tab to avoid missing
>   initial cause heading if loglevel < info.
> ---
>  drivers/mfd/ab8500-core.c |   25 ++++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
Patch applied, sorry for missing this one during the 3.5 merge window.

Cheers,
Samuel.

-- 
Intel Open Source Technology Centre
http://oss.intel.com/