From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<gregkh@linuxfoundation.org>
Subject: [PATCH 30/90] staging: comedi: amplc_dio200: store the pci_dev in the comedi_device
Date: Wed, 18 Jul 2012 18:37:50 -0700 [thread overview]
Message-ID: <201207181837.50650.hartleys@visionengravers.com> (raw)
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Since the pci_dev is no longer held in the provate data, we can
also cleanup the detach a bit. Remove the IS_ENABLED() tests in
the detach. If the pci_dev is non NULL it's a PCI device otherwise
it's an ISA device. Using IS_ENABLED() to omit the code paths
makes the code a bit confusing and doesn't save much.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/comedi/drivers/amplc_dio200.c | 31 +++++++++++----------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index ca9d4f2..6c81e377 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -424,7 +424,6 @@ static const struct dio200_layout_struct dio200_layouts[] = {
feel free to suggest moving the variable to the struct comedi_device struct.
*/
struct dio200_private {
- struct pci_dev *pci_dev; /* PCI device */
int intr_sd;
};
@@ -1225,7 +1224,7 @@ dio200_subdev_8254_cleanup(struct comedi_device *dev,
static void dio200_report_attach(struct comedi_device *dev, unsigned int irq)
{
const struct dio200_board *thisboard = comedi_board(dev);
- struct dio200_private *devpriv = dev->private;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
char tmpbuf[60];
int tmplen;
@@ -1236,7 +1235,7 @@ static void dio200_report_attach(struct comedi_device *dev, unsigned int irq)
else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_PCI) &&
thisboard->bustype == pci_bustype)
tmplen = scnprintf(tmpbuf, sizeof(tmpbuf),
- "(pci %s) ", pci_name(devpriv->pci_dev));
+ "(pci %s) ", pci_name(pcidev));
else
tmplen = 0;
if (irq)
@@ -1327,11 +1326,11 @@ static int dio200_common_attach(struct comedi_device *dev, unsigned long iobase,
static int dio200_pci_common_attach(struct comedi_device *dev,
struct pci_dev *pci_dev)
{
- struct dio200_private *devpriv = dev->private;
unsigned long iobase;
int ret;
- devpriv->pci_dev = pci_dev;
+ comedi_set_hw_dev(dev, &pci_dev->dev);
+
ret = comedi_pci_enable(pci_dev, DIO200_DRIVER_NAME);
if (ret < 0) {
dev_err(dev->class_dev,
@@ -1419,7 +1418,7 @@ static int __devinit dio200_attach_pci(struct comedi_device *dev,
static void dio200_detach(struct comedi_device *dev)
{
const struct dio200_board *thisboard = comedi_board(dev);
- struct dio200_private *devpriv = dev->private;
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
const struct dio200_layout_struct *layout;
unsigned n;
@@ -1444,19 +1443,13 @@ static void dio200_detach(struct comedi_device *dev)
}
}
}
- if (devpriv) {
- if (IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_PCI) &&
- thisboard->bustype == pci_bustype) {
- if (devpriv->pci_dev) {
- if (dev->iobase)
- comedi_pci_disable(devpriv->pci_dev);
- pci_dev_put(devpriv->pci_dev);
- }
- } else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_DIO200_ISA) &&
- thisboard->bustype == isa_bustype) {
- if (dev->iobase)
- release_region(dev->iobase, DIO200_IO_SIZE);
- }
+ if (pcidev) {
+ if (dev->iobase)
+ comedi_pci_disable(pcidev);
+ pci_dev_put(pcidev);
+ } else {
+ if (dev->iobase)
+ release_region(dev->iobase, DIO200_IO_SIZE);
}
}
--
1.7.11
next reply other threads:[~2012-07-19 1:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-19 1:37 H Hartley Sweeten [this message]
2012-07-19 10:10 ` Ian Abbott
2012-07-19 10:27 ` Ian Abbott
2012-07-19 10:38 ` Ian Abbott
2012-07-19 17:20 ` H Hartley Sweeten
2012-07-19 17:14 ` H Hartley Sweeten
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207181837.50650.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome