From: Krzysztof Mazur <krzysiek@podlesie.net>
To: David Woodhouse <dwmw2@infradead.org>
Cc: davem@davemloft.net, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/3] pppoatm: fix race condition with destroying of vcc
Date: Tue, 30 Oct 2012 20:52:24 +0100 [thread overview]
Message-ID: <20121030195224.GA2153@shrek.podlesie.net> (raw)
In-Reply-To: <20121030190725.GA14044@shrek.podlesie.net>
On Tue, Oct 30, 2012 at 08:07:25PM +0100, Krzysztof Mazur wrote:
> On Tue, Oct 30, 2012 at 09:37:48AM +0000, David Woodhouse wrote:
> >
> > Should we be locking it earlier, so that the atm_may_send() call is also
> > covered by the lock?
>
> Yes, but only to protect against concurent vcc_sendmsg().
>
> >
> > Either way, it's an obvious improvement on what we had before ??? and even
> > if the answer to my question above is 'yes', exceeding the configured
> > size by one packet is both harmless and almost never going to happen
> > since we now limit ourselves to two packets anyway. So:
> >
> > Acked-By: David Woodhouse <David.Woodhouse@intel.com>
> >
>
David, I think we should also fix the issue with sk_sndbuf < MTU,
which is described in comment in pppoatm_may_send() added by
your "pppoatm: Fix excessive queue bloat" patch.
The vcc_sendmsg() already does that.
Krzysiek
-- >8 --
Subject: [PATCH] pppoatm: fix sending packets when sk_sndbuf < MTU
Now pppoatm_send() works, when sk_sndbuf is smaller than MTU. This
issue was already pointed in comment:
/*
* It's not clear that we need to bother with using atm_may_send()
* to check we don't exceed sk->sk_sndbuf. If userspace sets a
* value of sk_sndbuf which is lower than the MTU, we're going to
* block for ever. But the code always did that before we introduced
* the packet count limit, so...
*/
The test is copied from alloc_tx() which is used by vcc_sendmsg().
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
---
net/atm/pppoatm.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/net/atm/pppoatm.c b/net/atm/pppoatm.c
index 4cc81b5..f25536b 100644
--- a/net/atm/pppoatm.c
+++ b/net/atm/pppoatm.c
@@ -306,12 +306,9 @@ static int pppoatm_send(struct ppp_channel *chan, struct sk_buff *skb)
/*
* It's not clear that we need to bother with using atm_may_send()
- * to check we don't exceed sk->sk_sndbuf. If userspace sets a
- * value of sk_sndbuf which is lower than the MTU, we're going to
- * block for ever. But the code always did that before we introduced
- * the packet count limit, so...
+ * to check we don't exceed sk->sk_sndbuf.
*/
- if (!atm_may_send(vcc, skb->truesize))
+ if (sk_wmem_alloc_get(sk_atm(vcc)) && !atm_may_send(vcc, skb->truesize))
goto nospace_unlock_sock;
atomic_add(skb->truesize, &sk_atm(ATM_SKB(skb)->vcc)->sk_wmem_alloc);
--
1.8.0.172.g62af90c
next prev parent reply other threads:[~2012-10-30 19:52 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-22 17:14 [PATCH v2 1/3] pppoatm: don't send frames to destroyed vcc Krzysztof Mazur
2012-10-22 17:14 ` [PATCH v2 2/3] pppoatm: fix race condition with destroying of vcc Krzysztof Mazur
2012-10-30 9:37 ` David Woodhouse
2012-10-30 19:07 ` Krzysztof Mazur
2012-10-30 19:52 ` Krzysztof Mazur [this message]
2012-10-31 10:16 ` David Woodhouse
2012-10-31 11:30 ` Krzysztof Mazur
2012-10-31 11:52 ` David Woodhouse
2012-10-30 14:26 ` Chas Williams (CONTRACTOR)
2012-10-30 18:20 ` Krzysztof Mazur
2012-10-31 9:41 ` Krzysztof Mazur
2012-10-31 10:22 ` Krzysztof Mazur
2012-10-31 20:03 ` chas williams - CONTRACTOR
2012-10-31 22:04 ` Krzysztof Mazur
2012-11-01 14:26 ` chas williams - CONTRACTOR
2012-11-02 9:40 ` Krzysztof Mazur
2012-11-02 10:54 ` Krzysztof Mazur
2012-10-22 17:14 ` [PATCH v2 3/3] pppoatm: protect against freeing " Krzysztof Mazur
2012-10-30 9:39 ` David Woodhouse
2012-10-30 19:26 ` Krzysztof Mazur
2012-11-27 17:16 ` David Woodhouse
2012-11-27 17:39 ` Krzysztof Mazur
2012-11-27 18:02 ` David Woodhouse
2012-11-27 18:28 ` Krzysztof Mazur
2012-11-28 20:18 ` Krzysztof Mazur
2012-11-28 20:44 ` David Woodhouse
2012-11-28 21:24 ` Krzysztof Mazur
2012-11-28 21:20 ` chas williams - CONTRACTOR
2012-11-28 21:45 ` [PATCH] atm: introduce vcc_pop() Krzysztof Mazur
2012-11-28 21:59 ` chas williams - CONTRACTOR
2012-11-28 22:10 ` Krzysztof Mazur
2012-11-28 22:33 ` [PATCH] atm: introduce vcc_pop_skb() Krzysztof Mazur
2012-12-03 13:22 ` David Woodhouse
2012-12-03 20:11 ` Krzysztof Mazur
2012-11-27 18:39 ` [PATCH v2 3/3] pppoatm: protect against freeing of vcc Krzysztof Mazur
2012-11-27 18:54 ` chas williams - CONTRACTOR
2012-11-27 22:36 ` [PATCH] solos-pci: Wait for pending TX to complete when releasing vcc David Woodhouse
2012-11-27 23:28 ` [PATCH] br2684: don't send frames on not-ready vcc David Woodhouse
2012-11-27 23:51 ` Krzysztof Mazur
2012-11-28 0:54 ` David Woodhouse
2012-11-28 8:08 ` Krzysztof Mazur
2012-11-28 9:58 ` David Woodhouse
2012-11-28 16:41 ` David Miller
2012-11-28 17:01 ` David Woodhouse
2012-11-28 17:04 ` David Miller
2012-11-28 17:09 ` David Woodhouse
2012-11-28 17:11 ` David Miller
2012-11-30 1:18 ` Nathan Williams
2012-11-30 1:34 ` David Woodhouse
2012-11-28 9:21 ` [PATCH v2 3/3] pppoatm: protect against freeing of vcc David Laight
2012-11-28 10:04 ` Krzysztof Mazur
2012-11-28 10:24 ` David Woodhouse
2012-11-28 15:18 ` chas williams - CONTRACTOR
2012-11-28 22:18 ` David Woodhouse
2012-11-29 10:57 ` Krzysztof Mazur
2012-11-29 11:55 ` David Woodhouse
2012-11-29 12:43 ` [PATCH] solos-pci: don't call vcc->pop() after pclose() Krzysztof Mazur
2012-11-29 12:57 ` David Woodhouse
2012-11-29 13:20 ` Krzysztof Mazur
2012-11-29 14:42 ` David Woodhouse
2012-11-29 14:55 ` Krzysztof Mazur
2012-11-29 14:41 ` chas williams - CONTRACTOR
2012-11-29 14:29 ` [PATCH v2 3/3] pppoatm: protect against freeing of vcc chas williams - CONTRACTOR
2012-11-29 15:09 ` Krzysztof Mazur
2012-11-29 15:47 ` David Woodhouse
2012-11-29 15:59 ` chas williams - CONTRACTOR
2012-11-29 16:24 ` David Woodhouse
2012-11-29 17:17 ` chas williams - CONTRACTOR
2012-11-29 18:11 ` David Woodhouse
2012-11-29 18:29 ` chas williams - CONTRACTOR
2012-11-29 22:17 ` David Woodhouse
2012-11-30 1:38 ` Chas Williams (CONTRACTOR)
2012-11-30 1:57 ` David Woodhouse
2012-11-30 8:25 ` David Woodhouse
2012-11-30 9:53 ` Krzysztof Mazur
2012-11-30 12:10 ` David Woodhouse
2012-11-30 16:23 ` David Woodhouse
2012-11-30 17:00 ` Krzysztof Mazur
2012-11-30 18:33 ` David Woodhouse
2012-11-30 17:12 ` chas williams - CONTRACTOR
2012-11-30 17:39 ` Krzysztof Mazur
2012-11-29 16:28 ` Krzysztof Mazur
2012-11-29 15:37 ` chas williams - CONTRACTOR
2012-11-29 15:59 ` David Woodhouse
2012-11-29 16:11 ` chas williams - CONTRACTOR
2012-10-23 6:52 ` [PATCH v2 1/3] pppoatm: don't send frames to destroyed vcc David Miller
2012-10-23 8:12 ` David Woodhouse
2012-10-30 9:35 ` David Woodhouse
2012-10-30 20:19 ` Krzysztof Mazur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121030195224.GA2153@shrek.podlesie.net \
--to=krzysiek@podlesie.net \
--cc=davem@davemloft.net \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®