From: Krzysztof Mazur <krzysiek@podlesie.net>
To: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Cc: David Woodhouse <dwmw2@infradead.org>,
davem@davemloft.net, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] atm: introduce vcc_pop()
Date: Wed, 28 Nov 2012 22:45:34 +0100 [thread overview]
Message-ID: <20121128214533.GA25486@shrek.podlesie.net> (raw)
In-Reply-To: <20121128162001.3f326720@thirdoffive.cmf.nrl.navy.mil>
On Wed, Nov 28, 2012 at 04:20:01PM -0500, chas williams - CONTRACTOR wrote:
> On Wed, 28 Nov 2012 21:18:37 +0100
> Krzysztof Mazur <krzysiek@podlesie.net> wrote:
>
> > On Tue, Nov 27, 2012 at 07:28:43PM +0100, Krzysztof Mazur wrote:
> > > I think that we should add atm_pop() function that does that and fix all
> > > drivers.
> > >
> >
> > I'm sending a patch that implements that idea.
> >
> > Currently we need two arguments vcc and skb. However, we have reserved
> > ATM_SKB(skb)->vcc in skb control block for keeping vcc
> > and we can create single argument version vcc_pop(skb). In that case
> > we need to move:
> >
> > ATM_SKB(skb)->vcc = vcc;
> >
> > from ATM drivers to functions that call atmdev_ops->send().
>
> i dont like the vcc->pop() implementation and at one point i had the
> crazy idea of using skb->destructors to handle it. however, i think it
> would be necessary to clone the skb's so any existing destructor is
> preserved.
With this patch we will kill vcc->pop() in drivers and in future
we can do that without changes in drivers.
>
> > +#define vcc_pop(vcc, skb) vcc_pop_any(vcc, skb)
> > +#define vcc_pop_irq(vcc, skb) vcc_pop_any(vcc, skb)
>
> don't define these if you dont plan on using them anway.
I removed them. I also added check if vcc is NULL, as David Woodhouse
suggested, some drivers use that.
Krzysiek
-- >8 --
Subject: [PATCH v2] atm: introduce vcc_pop()
The atm drivers to free skb, that they got from ->send(), cannot just use
dev_kfree_skb*(), but they must use something like:
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
When vcc->pop() is non-NULL, but they must in such case call vcc->pop().
This causes duplicated code in many drivers, and some drivers even forgot
to call vcc->pop() in some error handling code.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
---
include/linux/atmdev.h | 8 ++++++++
net/atm/common.c | 9 +++++++++
2 files changed, 17 insertions(+)
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index c1da539..57bd93f 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -283,6 +283,14 @@ int atm_pcr_goal(const struct atm_trafprm *tp);
void vcc_release_async(struct atm_vcc *vcc, int reply);
+/**
+ * vcc_pop - free transmitted ATM skb
+ *
+ * vcc_pop() should be used by ATM driver to free skbs, that were sent
+ * to driver by atmdev_opt->send() function.
+ */
+void vcc_pop(struct atm_vcc *vcc, struct sk_buff *skb);
+
struct atm_ioctl {
struct module *owner;
/* A module reference is kept if appropriate over this call.
diff --git a/net/atm/common.c b/net/atm/common.c
index 806fc0a..76bf76c 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -654,6 +654,15 @@ out:
return error;
}
+void vcc_pop(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+ if (vcc && vcc->pop)
+ vcc->pop(vcc, skb);
+ else
+ dev_kfree_skb_any(skb);
+}
+EXPORT_SYMBOL(vcc_pop);
+
unsigned int vcc_poll(struct file *file, struct socket *sock, poll_table *wait)
{
struct sock *sk = sock->sk;
--
1.8.0.411.g71a7da8
next prev parent reply other threads:[~2012-11-28 21:45 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-22 17:14 [PATCH v2 1/3] pppoatm: don't send frames to destroyed vcc Krzysztof Mazur
2012-10-22 17:14 ` [PATCH v2 2/3] pppoatm: fix race condition with destroying of vcc Krzysztof Mazur
2012-10-30 9:37 ` David Woodhouse
2012-10-30 19:07 ` Krzysztof Mazur
2012-10-30 19:52 ` Krzysztof Mazur
2012-10-31 10:16 ` David Woodhouse
2012-10-31 11:30 ` Krzysztof Mazur
2012-10-31 11:52 ` David Woodhouse
2012-10-30 14:26 ` Chas Williams (CONTRACTOR)
2012-10-30 18:20 ` Krzysztof Mazur
2012-10-31 9:41 ` Krzysztof Mazur
2012-10-31 10:22 ` Krzysztof Mazur
2012-10-31 20:03 ` chas williams - CONTRACTOR
2012-10-31 22:04 ` Krzysztof Mazur
2012-11-01 14:26 ` chas williams - CONTRACTOR
2012-11-02 9:40 ` Krzysztof Mazur
2012-11-02 10:54 ` Krzysztof Mazur
2012-10-22 17:14 ` [PATCH v2 3/3] pppoatm: protect against freeing " Krzysztof Mazur
2012-10-30 9:39 ` David Woodhouse
2012-10-30 19:26 ` Krzysztof Mazur
2012-11-27 17:16 ` David Woodhouse
2012-11-27 17:39 ` Krzysztof Mazur
2012-11-27 18:02 ` David Woodhouse
2012-11-27 18:28 ` Krzysztof Mazur
2012-11-28 20:18 ` Krzysztof Mazur
2012-11-28 20:44 ` David Woodhouse
2012-11-28 21:24 ` Krzysztof Mazur
2012-11-28 21:20 ` chas williams - CONTRACTOR
2012-11-28 21:45 ` Krzysztof Mazur [this message]
2012-11-28 21:59 ` [PATCH] atm: introduce vcc_pop() chas williams - CONTRACTOR
2012-11-28 22:10 ` Krzysztof Mazur
2012-11-28 22:33 ` [PATCH] atm: introduce vcc_pop_skb() Krzysztof Mazur
2012-12-03 13:22 ` David Woodhouse
2012-12-03 20:11 ` Krzysztof Mazur
2012-11-27 18:39 ` [PATCH v2 3/3] pppoatm: protect against freeing of vcc Krzysztof Mazur
2012-11-27 18:54 ` chas williams - CONTRACTOR
2012-11-27 22:36 ` [PATCH] solos-pci: Wait for pending TX to complete when releasing vcc David Woodhouse
2012-11-27 23:28 ` [PATCH] br2684: don't send frames on not-ready vcc David Woodhouse
2012-11-27 23:51 ` Krzysztof Mazur
2012-11-28 0:54 ` David Woodhouse
2012-11-28 8:08 ` Krzysztof Mazur
2012-11-28 9:58 ` David Woodhouse
2012-11-28 16:41 ` David Miller
2012-11-28 17:01 ` David Woodhouse
2012-11-28 17:04 ` David Miller
2012-11-28 17:09 ` David Woodhouse
2012-11-28 17:11 ` David Miller
2012-11-30 1:18 ` Nathan Williams
2012-11-30 1:34 ` David Woodhouse
2012-11-28 9:21 ` [PATCH v2 3/3] pppoatm: protect against freeing of vcc David Laight
2012-11-28 10:04 ` Krzysztof Mazur
2012-11-28 10:24 ` David Woodhouse
2012-11-28 15:18 ` chas williams - CONTRACTOR
2012-11-28 22:18 ` David Woodhouse
2012-11-29 10:57 ` Krzysztof Mazur
2012-11-29 11:55 ` David Woodhouse
2012-11-29 12:43 ` [PATCH] solos-pci: don't call vcc->pop() after pclose() Krzysztof Mazur
2012-11-29 12:57 ` David Woodhouse
2012-11-29 13:20 ` Krzysztof Mazur
2012-11-29 14:42 ` David Woodhouse
2012-11-29 14:55 ` Krzysztof Mazur
2012-11-29 14:41 ` chas williams - CONTRACTOR
2012-11-29 14:29 ` [PATCH v2 3/3] pppoatm: protect against freeing of vcc chas williams - CONTRACTOR
2012-11-29 15:09 ` Krzysztof Mazur
2012-11-29 15:47 ` David Woodhouse
2012-11-29 15:59 ` chas williams - CONTRACTOR
2012-11-29 16:24 ` David Woodhouse
2012-11-29 17:17 ` chas williams - CONTRACTOR
2012-11-29 18:11 ` David Woodhouse
2012-11-29 18:29 ` chas williams - CONTRACTOR
2012-11-29 22:17 ` David Woodhouse
2012-11-30 1:38 ` Chas Williams (CONTRACTOR)
2012-11-30 1:57 ` David Woodhouse
2012-11-30 8:25 ` David Woodhouse
2012-11-30 9:53 ` Krzysztof Mazur
2012-11-30 12:10 ` David Woodhouse
2012-11-30 16:23 ` David Woodhouse
2012-11-30 17:00 ` Krzysztof Mazur
2012-11-30 18:33 ` David Woodhouse
2012-11-30 17:12 ` chas williams - CONTRACTOR
2012-11-30 17:39 ` Krzysztof Mazur
2012-11-29 16:28 ` Krzysztof Mazur
2012-11-29 15:37 ` chas williams - CONTRACTOR
2012-11-29 15:59 ` David Woodhouse
2012-11-29 16:11 ` chas williams - CONTRACTOR
2012-10-23 6:52 ` [PATCH v2 1/3] pppoatm: don't send frames to destroyed vcc David Miller
2012-10-23 8:12 ` David Woodhouse
2012-10-30 9:35 ` David Woodhouse
2012-10-30 20:19 ` Krzysztof Mazur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121128214533.GA25486@shrek.podlesie.net \
--to=krzysiek@podlesie.net \
--cc=chas@cmf.nrl.navy.mil \
--cc=davem@davemloft.net \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®