* 3.7.0 does not detect Realtek network card automatically
@ 2012-12-18 21:15 Björn Christoph
2012-12-18 22:43 ` Francois Romieu
0 siblings, 1 reply; 2+ messages in thread
From: Björn Christoph @ 2012-12-18 21:15 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1548 bytes --]
Hello,
I'm running Linux Ubuntu 12.0.4 with the following kernel:
linux 3.7.0-030700-generic #201212102335 SMP Tue Dec 11 04:36:24 UTC
2012 x86_64 x86_64 x86_64 GNU/Linux
Hardware: AMD A4-5300 CPU ; Gigabyte GA-F2A85X-D3H mainboard ; 4 Gb
RAM ; several Samsung and Seagate hard disks
I upgraded my system from a former AMD AM2+ mainboard with an AMD 240e
to the one above. Before I ran kernel 3.3.6 without issues.
Now, I upgraded to kernel 3.7.0 as my hardware is quite new.
Problem: If I start the system (it's a server without a GUI) and enter
my lvmcrypt password the system boots but it doesn't configure the
network. ifconfig just shows "local loopback". trying to bring up the
eth0 or eth1 states this one doesn't exist.
Workaround: Start the same kernel in recovery mode in Grub2 - choose
to "enable network". Afterwards, I still get the information like
"waiting for another 60 seconds to configure the network" and then
afterwards the message that not everything was configured. However, it
is - I then see "local loopback" and also eth0 with a proper IP.
You can find attached some kernel logs which might help in the analysis?
I also tried kernel 3.7.1 but that one doesn't work with the above
workaround - I never get a working network.
The driver for the Realtek network adapter of the mainboard I
recompiled with the latest available version as well.
Not sure what to do here. It's an Ubuntu kernel - should I take the
one from the kernel GIT, compile it and activate some debugging or
something to assist?
Thanks,
Bjoern
[-- Attachment #2: boot_no_recovery_no_net.log --]
[-- Type: application/octet-stream, Size: 96762 bytes --]
Dec 18 18:49:42 linux kernel: imklog 5.8.6, log source = /proc/kmsg started.
Dec 18 18:49:42 linux kernel: [ 0.000000] Initializing cgroup subsys cpuset
Dec 18 18:49:42 linux kernel: [ 0.000000] Initializing cgroup subsys cpu
Dec 18 18:49:42 linux kernel: [ 0.000000] Linux version 3.7.0-030700-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201212102335 SMP Tue Dec 11 04:36:24 UTC 2012
Dec 18 18:49:42 linux kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.7.0-030700-generic root=/dev/mapper/linux-OS ro recovery nomodeset
Dec 18 18:49:42 linux kernel: [ 0.000000] KERNEL supported cpus:
Dec 18 18:49:42 linux kernel: [ 0.000000] Intel GenuineIntel
Dec 18 18:49:42 linux kernel: [ 0.000000] AMD AuthenticAMD
Dec 18 18:49:42 linux kernel: [ 0.000000] Centaur CentaurHauls
Dec 18 18:49:42 linux kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d6f0fff] usable
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009d6f1000-0x000000009d9d1fff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009d9d2000-0x000000009dd28fff] ACPI NVS
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009dd29000-0x000000009e9d2fff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009e9d3000-0x000000009e9d3fff] usable
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009e9d4000-0x000000009ebd9fff] ACPI NVS
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009ebda000-0x000000009f04bfff] usable
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009f04c000-0x000000009f7dcfff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009f7dd000-0x000000009f7fffff] usable
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
Dec 18 18:49:42 linux kernel: [ 0.000000] NX (Execute Disable) protection: active
Dec 18 18:49:42 linux kernel: [ 0.000000] DMI 2.7 present.
Dec 18 18:49:42 linux kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-D3H, BIOS F1 10/09/2012
Dec 18 18:49:42 linux kernel: [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Dec 18 18:49:42 linux kernel: [ 0.000000] No AGP bridge found
Dec 18 18:49:42 linux kernel: [ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
Dec 18 18:49:42 linux kernel: [ 0.000000] MTRR default type: uncachable
Dec 18 18:49:42 linux kernel: [ 0.000000] MTRR fixed ranges enabled:
Dec 18 18:49:42 linux kernel: [ 0.000000] 00000-9FFFF write-back
Dec 18 18:49:42 linux kernel: [ 0.000000] A0000-BFFFF write-through
Dec 18 18:49:42 linux kernel: [ 0.000000] C0000-D2FFF write-protect
Dec 18 18:49:42 linux kernel: [ 0.000000] D3000-E7FFF uncachable
Dec 18 18:49:42 linux kernel: [ 0.000000] E8000-FFFFF write-protect
Dec 18 18:49:42 linux kernel: [ 0.000000] MTRR variable ranges enabled:
Dec 18 18:49:42 linux kernel: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
Dec 18 18:49:42 linux kernel: [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
Dec 18 18:49:42 linux kernel: [ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
Dec 18 18:49:42 linux kernel: [ 0.000000] 3 disabled
Dec 18 18:49:42 linux kernel: [ 0.000000] 4 disabled
Dec 18 18:49:42 linux kernel: [ 0.000000] 5 disabled
Dec 18 18:49:42 linux kernel: [ 0.000000] 6 disabled
Dec 18 18:49:42 linux kernel: [ 0.000000] 7 disabled
Dec 18 18:49:42 linux kernel: [ 0.000000] TOM2: 000000013f000000 aka 5104M
Dec 18 18:49:42 linux kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Dec 18 18:49:42 linux kernel: [ 0.000000] original variable MTRRs
Dec 18 18:49:42 linux kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
Dec 18 18:49:42 linux kernel: [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
Dec 18 18:49:42 linux kernel: [ 0.000000] reg 2, base: 2552MB, range: 8MB, type UC
Dec 18 18:49:42 linux kernel: [ 0.000000] total RAM covered: 2552M
Dec 18 18:49:42 linux kernel: [ 0.000000] Found optimal setting for mtrr clean up
Dec 18 18:49:42 linux kernel: [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
Dec 18 18:49:42 linux kernel: [ 0.000000] New variable MTRRs
Dec 18 18:49:42 linux kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
Dec 18 18:49:42 linux kernel: [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
Dec 18 18:49:42 linux kernel: [ 0.000000] reg 2, base: 2552MB, range: 8MB, type UC
Dec 18 18:49:42 linux kernel: [ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
Dec 18 18:49:42 linux kernel: [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
Dec 18 18:49:42 linux kernel: [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
Dec 18 18:49:42 linux kernel: [ 0.000000] Using GB pages for direct mapping
Dec 18 18:49:42 linux kernel: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x9f7fffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
Dec 18 18:49:42 linux kernel: [ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
Dec 18 18:49:42 linux kernel: [ 0.000000] kernel direct mapping tables up to 0x9f7fffff @ [mem 0x1fffe000-0x1fffffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] init_memory_mapping: [mem 0x100001000-0x13effffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
Dec 18 18:49:42 linux kernel: [ 0.000000] [mem 0x100200000-0x13effffff] page 2M
Dec 18 18:49:42 linux kernel: [ 0.000000] kernel direct mapping tables up to 0x13effffff @ [mem 0x9f7fd000-0x9f7fffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] RAMDISK: [mem 0x35c22000-0x36e08fff]
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: XSDT 000000009dd13078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: FACP 000000009dd18f88 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120913/tbfadt-598)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: DSDT 000000009dd13188 05DFE (v02 ALASKA A M I 00000000 INTL 20051117)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: FACS 000000009dd21d80 00040
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: APIC 000000009dd19080 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: FPDT 000000009dd190f8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: MCFG 000000009dd19140 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: HPET 000000009dd19180 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: IFEU 000000009dd191b8 00042 (v01 ALASKA A M I 01072009 00000000)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: BGRT 000000009dd19200 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: SSDT 000000009dd19238 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: SSDT 000000009dd198f0 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: CRAT 000000009dd19da8 001F8 (v01 AMD AGESA 00000001 AMD 00000001)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Dec 18 18:49:42 linux kernel: [ 0.000000] No NUMA configuration found
Dec 18 18:49:42 linux kernel: [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13effffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] NODE_DATA [mem 0x13effc000-0x13effffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013e5fffff] on node 0
Dec 18 18:49:42 linux kernel: [ 0.000000] Zone ranges:
Dec 18 18:49:42 linux kernel: [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] Normal [mem 0x100000000-0x13effffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] Movable zone start for each node
Dec 18 18:49:42 linux kernel: [ 0.000000] Early memory node ranges
Dec 18 18:49:42 linux kernel: [ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
Dec 18 18:49:42 linux kernel: [ 0.000000] node 0: [mem 0x00100000-0x9d6f0fff]
Dec 18 18:49:42 linux kernel: [ 0.000000] node 0: [mem 0x9e9d3000-0x9e9d3fff]
Dec 18 18:49:42 linux kernel: [ 0.000000] node 0: [mem 0x9ebda000-0x9f04bfff]
Dec 18 18:49:42 linux kernel: [ 0.000000] node 0: [mem 0x9f7dd000-0x9f7fffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] node 0: [mem 0x100001000-0x13effffff]
Dec 18 18:49:42 linux kernel: [ 0.000000] On node 0 totalpages: 903956
Dec 18 18:49:42 linux kernel: [ 0.000000] DMA zone: 64 pages used for memmap
Dec 18 18:49:42 linux kernel: [ 0.000000] DMA zone: 6 pages reserved
Dec 18 18:49:42 linux kernel: [ 0.000000] DMA zone: 3912 pages, LIFO batch:0
Dec 18 18:49:42 linux kernel: [ 0.000000] DMA32 zone: 16320 pages used for memmap
Dec 18 18:49:42 linux kernel: [ 0.000000] DMA32 zone: 625607 pages, LIFO batch:31
Dec 18 18:49:42 linux kernel: [ 0.000000] Normal zone: 4032 pages used for memmap
Dec 18 18:49:42 linux kernel: [ 0.000000] Normal zone: 254015 pages, LIFO batch:31
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
Dec 18 18:49:42 linux kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: IRQ0 used by override.
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: IRQ2 used by override.
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: IRQ9 used by override.
Dec 18 18:49:42 linux kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Dec 18 18:49:42 linux kernel: [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
Dec 18 18:49:42 linux kernel: [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
Dec 18 18:49:42 linux kernel: [ 0.000000] nr_irqs_gsi: 40
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009d6f1000 - 000000009d9d2000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009d9d2000 - 000000009dd29000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009dd29000 - 000000009e9d3000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009e9d4000 - 000000009ebda000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009f04c000 - 000000009f7dd000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
Dec 18 18:49:42 linux kernel: [ 0.000000] e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
Dec 18 18:49:42 linux kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Dec 18 18:49:42 linux kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
Dec 18 18:49:42 linux kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013ec00000 s84736 r8192 d21760 u524288
Dec 18 18:49:42 linux kernel: [ 0.000000] pcpu-alloc: s84736 r8192 d21760 u524288 alloc=1*2097152
Dec 18 18:49:42 linux kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3
Dec 18 18:49:42 linux kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 883534
Dec 18 18:49:42 linux kernel: [ 0.000000] Policy zone: Normal
Dec 18 18:49:42 linux kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.0-030700-generic root=/dev/mapper/linux-OS ro recovery nomodeset
Dec 18 18:49:42 linux kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Dec 18 18:49:42 linux kernel: [ 0.000000] __ex_table already sorted, skipping sort
Dec 18 18:49:42 linux kernel: [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
Dec 18 18:49:42 linux kernel: [ 0.000000] Checking aperture...
Dec 18 18:49:42 linux kernel: [ 0.000000] No AGP bridge found
Dec 18 18:49:42 linux kernel: [ 0.000000] Node 0: aperture @ 0 size 32 MB
Dec 18 18:49:42 linux kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
Dec 18 18:49:42 linux kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
Dec 18 18:49:42 linux kernel: [ 0.000000] This costs you 64 MB of RAM
Dec 18 18:49:42 linux kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ 94000000
Dec 18 18:49:42 linux kernel: [ 0.000000] PM: Registered nosave memory: 0000000094000000 - 0000000098000000
Dec 18 18:49:42 linux kernel: [ 0.000000] Memory: 3392160k/5226496k available (7007k kernel code, 1610672k absent, 223664k reserved, 6203k data, 992k init)
Dec 18 18:49:42 linux kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 18 18:49:42 linux kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 18 18:49:42 linux kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Dec 18 18:49:42 linux kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Dec 18 18:49:42 linux kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:712 16
Dec 18 18:49:42 linux kernel: [ 0.000000] Extended CMOS year: 2000
Dec 18 18:49:42 linux kernel: [ 0.000000] spurious 8259A interrupt: IRQ7.
Dec 18 18:49:42 linux kernel: [ 0.000000] Console: colour VGA+ 80x25
Dec 18 18:49:42 linux kernel: [ 0.000000] console [tty0] enabled
Dec 18 18:49:42 linux kernel: [ 0.000000] allocated 14680064 bytes of page_cgroup
Dec 18 18:49:42 linux kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Dec 18 18:49:42 linux kernel: [ 0.000000] hpet clockevent registered
Dec 18 18:49:42 linux kernel: [ 0.000000] tsc: Fast TSC calibration using PIT
Dec 18 18:49:42 linux kernel: [ 0.004000] tsc: Detected 3393.778 MHz processor
Dec 18 18:49:42 linux kernel: [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.55 BogoMIPS (lpj=13575112)
Dec 18 18:49:42 linux kernel: [ 0.000069] pid_max: default: 32768 minimum: 301
Dec 18 18:49:42 linux kernel: [ 0.000121] Security Framework initialized
Dec 18 18:49:42 linux kernel: [ 0.000162] AppArmor: AppArmor initialized
Dec 18 18:49:42 linux kernel: [ 0.000192] Yama: becoming mindful.
Dec 18 18:49:42 linux kernel: [ 0.000503] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Dec 18 18:49:42 linux kernel: [ 0.001648] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Dec 18 18:49:42 linux kernel: [ 0.002192] Mount-cache hash table entries: 256
Dec 18 18:49:42 linux kernel: [ 0.002386] Initializing cgroup subsys cpuacct
Dec 18 18:49:42 linux kernel: [ 0.002420] Initializing cgroup subsys memory
Dec 18 18:49:42 linux kernel: [ 0.002458] Initializing cgroup subsys devices
Dec 18 18:49:42 linux kernel: [ 0.002489] Initializing cgroup subsys freezer
Dec 18 18:49:42 linux kernel: [ 0.002522] Initializing cgroup subsys blkio
Dec 18 18:49:42 linux kernel: [ 0.002554] Initializing cgroup subsys perf_event
Dec 18 18:49:42 linux kernel: [ 0.002587] Initializing cgroup subsys hugetlb
Dec 18 18:49:42 linux kernel: [ 0.002640] tseg: 009f800000
Dec 18 18:49:42 linux kernel: [ 0.002642] CPU: Physical Processor ID: 0
Dec 18 18:49:42 linux kernel: [ 0.002673] CPU: Processor Core ID: 0
Dec 18 18:49:42 linux kernel: [ 0.002706] mce: CPU supports 7 MCE banks
Dec 18 18:49:42 linux kernel: [ 0.002761] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Dec 18 18:49:42 linux kernel: [ 0.002761] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Dec 18 18:49:42 linux kernel: [ 0.002761] tlb_flushall_shift: 5
Dec 18 18:49:42 linux kernel: [ 0.002898] Freeing SMP alternatives: 24k freed
Dec 18 18:49:42 linux kernel: [ 0.004364] ACPI: Core revision 20120913
Dec 18 18:49:42 linux kernel: [ 0.006865] ftrace: allocating 28504 entries in 112 pages
Dec 18 18:49:42 linux kernel: [ 0.016628] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Dec 18 18:49:42 linux kernel: [ 0.056252] smpboot: CPU0: AMD A4-5300 APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
Dec 18 18:49:42 linux kernel: [ 0.162357] Performance Events:
Dec 18 18:49:42 linux kernel: [ 0.162387] perf: AMD core performance counters detected
Dec 18 18:49:42 linux kernel: [ 0.162449] AMD PMU driver.
Dec 18 18:49:42 linux kernel: [ 0.162480] ... version: 0
Dec 18 18:49:42 linux kernel: [ 0.162511] ... bit width: 48
Dec 18 18:49:42 linux kernel: [ 0.162542] ... generic registers: 6
Dec 18 18:49:42 linux kernel: [ 0.162574] ... value mask: 0000ffffffffffff
Dec 18 18:49:42 linux kernel: [ 0.162605] ... max period: 00007fffffffffff
Dec 18 18:49:42 linux kernel: [ 0.162637] ... fixed-purpose events: 0
Dec 18 18:49:42 linux kernel: [ 0.162668] ... event mask: 000000000000003f
Dec 18 18:49:42 linux kernel: [ 0.163626] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Dec 18 18:49:42 linux kernel: [ 0.164936] smpboot: Booting Node 0, Processors #1
Dec 18 18:49:42 linux kernel: [ 0.178005] Brought up 2 CPUs
Dec 18 18:49:42 linux kernel: [ 0.178072] smpboot: Total of 2 processors activated (13575.11 BogoMIPS)
Dec 18 18:49:42 linux kernel: [ 0.178575] devtmpfs: initialized
Dec 18 18:49:42 linux kernel: [ 0.179582] EVM: security.selinux
Dec 18 18:49:42 linux kernel: [ 0.179613] EVM: security.SMACK64
Dec 18 18:49:42 linux kernel: [ 0.179644] EVM: security.capability
Dec 18 18:49:42 linux kernel: [ 0.179717] PM: Registering ACPI NVS region [mem 0x9d9d2000-0x9dd28fff] (3502080 bytes)
Dec 18 18:49:42 linux kernel: [ 0.179802] PM: Registering ACPI NVS region [mem 0x9e9d4000-0x9ebd9fff] (2121728 bytes)
Dec 18 18:49:42 linux kernel: [ 0.180585] regulator-dummy: no parameters
Dec 18 18:49:42 linux kernel: [ 0.180642] RTC time: 17:48:50, date: 12/18/12
Dec 18 18:49:42 linux kernel: [ 0.180711] NET: Registered protocol family 16
Dec 18 18:49:42 linux kernel: [ 0.180913] ACPI: bus type pci registered
Dec 18 18:49:42 linux kernel: [ 0.180992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Dec 18 18:49:42 linux kernel: [ 0.181028] PCI: not using MMCONFIG
Dec 18 18:49:42 linux kernel: [ 0.181059] PCI: Using configuration type 1 for base access
Dec 18 18:49:42 linux kernel: [ 0.181090] PCI: Using configuration type 1 for extended access
Dec 18 18:49:42 linux kernel: [ 0.182024] bio: create slab <bio-0> at 0
Dec 18 18:49:42 linux kernel: [ 0.182141] ACPI: Added _OSI(Module Device)
Dec 18 18:49:42 linux kernel: [ 0.182174] ACPI: Added _OSI(Processor Device)
Dec 18 18:49:42 linux kernel: [ 0.182206] ACPI: Added _OSI(3.0 _SCP Extensions)
Dec 18 18:49:42 linux kernel: [ 0.182238] ACPI: Added _OSI(Processor Aggregator Device)
Dec 18 18:49:42 linux kernel: [ 0.183245] ACPI: EC: Look up EC in DSDT
Dec 18 18:49:42 linux kernel: [ 0.184440] ACPI: Executed 1 blocks of module-level executable AML code
Dec 18 18:49:42 linux kernel: [ 0.187388] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Dec 18 18:49:42 linux kernel: [ 0.187829] ACPI: Interpreter enabled
Dec 18 18:49:42 linux kernel: [ 0.187862] ACPI: (supports S0 S3 S4 S5)
Dec 18 18:49:42 linux kernel: [ 0.188017] ACPI: Using IOAPIC for interrupt routing
Dec 18 18:49:42 linux kernel: [ 0.188187] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Dec 18 18:49:42 linux kernel: [ 0.188260] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Dec 18 18:49:42 linux kernel: [ 0.211406] ACPI: No dock devices found.
Dec 18 18:49:42 linux kernel: [ 0.211443] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Dec 18 18:49:42 linux kernel: [ 0.211771] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Dec 18 18:49:42 linux kernel: [ 0.212085] PCI host bridge to bus 0000:00
Dec 18 18:49:42 linux kernel: [ 0.212119] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 18 18:49:42 linux kernel: [ 0.212152] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
Dec 18 18:49:42 linux kernel: [ 0.212185] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
Dec 18 18:49:42 linux kernel: [ 0.212218] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
Dec 18 18:49:42 linux kernel: [ 0.212250] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Dec 18 18:49:42 linux kernel: [ 0.212282] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Dec 18 18:49:42 linux kernel: [ 0.212316] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
Dec 18 18:49:42 linux kernel: [ 0.212348] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
Dec 18 18:49:42 linux kernel: [ 0.212387] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
Dec 18 18:49:42 linux kernel: [ 0.212423] pci 0000:00:01.0: [1002:9993] type 00 class 0x030000
Dec 18 18:49:42 linux kernel: [ 0.212430] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
Dec 18 18:49:42 linux kernel: [ 0.212435] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
Dec 18 18:49:42 linux kernel: [ 0.212440] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
Dec 18 18:49:42 linux kernel: [ 0.212474] pci 0000:00:01.0: supports D1 D2
Dec 18 18:49:42 linux kernel: [ 0.212487] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
Dec 18 18:49:42 linux kernel: [ 0.212494] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff]
Dec 18 18:49:42 linux kernel: [ 0.212533] pci 0000:00:01.1: supports D1 D2
Dec 18 18:49:42 linux kernel: [ 0.212551] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
Dec 18 18:49:42 linux kernel: [ 0.212589] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
Dec 18 18:49:42 linux kernel: [ 0.212605] pci 0000:00:06.0: [1022:1416] type 01 class 0x060400
Dec 18 18:49:42 linux kernel: [ 0.212644] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
Dec 18 18:49:42 linux kernel: [ 0.212681] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
Dec 18 18:49:42 linux kernel: [ 0.212699] pci 0000:00:10.0: reg 10: [mem 0xfeb46000-0xfeb47fff 64bit]
Dec 18 18:49:42 linux kernel: [ 0.212789] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
Dec 18 18:49:42 linux kernel: [ 0.212825] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
Dec 18 18:49:42 linux kernel: [ 0.212842] pci 0000:00:10.1: reg 10: [mem 0xfeb44000-0xfeb45fff 64bit]
Dec 18 18:49:42 linux kernel: [ 0.212932] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
Dec 18 18:49:42 linux kernel: [ 0.212965] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
Dec 18 18:49:42 linux kernel: [ 0.212981] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
Dec 18 18:49:42 linux kernel: [ 0.212989] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
Dec 18 18:49:42 linux kernel: [ 0.212997] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
Dec 18 18:49:42 linux kernel: [ 0.213004] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
Dec 18 18:49:42 linux kernel: [ 0.213012] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
Dec 18 18:49:42 linux kernel: [ 0.213020] pci 0000:00:11.0: reg 24: [mem 0xfeb4d000-0xfeb4d7ff]
Dec 18 18:49:42 linux kernel: [ 0.213069] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
Dec 18 18:49:42 linux kernel: [ 0.213080] pci 0000:00:12.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
Dec 18 18:49:42 linux kernel: [ 0.213139] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
Dec 18 18:49:42 linux kernel: [ 0.213154] pci 0000:00:12.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
Dec 18 18:49:42 linux kernel: [ 0.213222] pci 0000:00:12.2: supports D1 D2
Dec 18 18:49:42 linux kernel: [ 0.213224] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Dec 18 18:49:42 linux kernel: [ 0.213243] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
Dec 18 18:49:42 linux kernel: [ 0.213254] pci 0000:00:13.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
Dec 18 18:49:42 linux kernel: [ 0.213313] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
Dec 18 18:49:42 linux kernel: [ 0.213329] pci 0000:00:13.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
Dec 18 18:49:42 linux kernel: [ 0.213396] pci 0000:00:13.2: supports D1 D2
Dec 18 18:49:42 linux kernel: [ 0.213398] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Dec 18 18:49:42 linux kernel: [ 0.213417] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
Dec 18 18:49:42 linux kernel: [ 0.213480] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
Dec 18 18:49:42 linux kernel: [ 0.213543] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
Dec 18 18:49:42 linux kernel: [ 0.213578] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
Dec 18 18:49:42 linux kernel: [ 0.213589] pci 0000:00:14.5: reg 10: [mem 0xfeb48000-0xfeb48fff]
Dec 18 18:49:42 linux kernel: [ 0.213645] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
Dec 18 18:49:42 linux kernel: [ 0.213662] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
Dec 18 18:49:42 linux kernel: [ 0.213677] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
Dec 18 18:49:42 linux kernel: [ 0.213693] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
Dec 18 18:49:42 linux kernel: [ 0.213713] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
Dec 18 18:49:42 linux kernel: [ 0.213730] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
Dec 18 18:49:42 linux kernel: [ 0.213789] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
Dec 18 18:49:42 linux kernel: [ 0.213802] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
Dec 18 18:49:42 linux kernel: [ 0.213823] pci 0000:01:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
Dec 18 18:49:42 linux kernel: [ 0.213836] pci 0000:01:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
Dec 18 18:49:42 linux kernel: [ 0.213891] pci 0000:01:00.0: supports D1 D2
Dec 18 18:49:42 linux kernel: [ 0.213892] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Dec 18 18:49:42 linux kernel: [ 0.221984] pci 0000:00:04.0: PCI bridge to [bus 01]
Dec 18 18:49:42 linux kernel: [ 0.222037] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
Dec 18 18:49:42 linux kernel: [ 0.222047] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
Dec 18 18:49:42 linux kernel: [ 0.222120] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601
Dec 18 18:49:42 linux kernel: [ 0.222210] pci 0000:02:00.0: reg 24: [mem 0xfea10000-0xfea11fff]
Dec 18 18:49:42 linux kernel: [ 0.222228] pci 0000:02:00.0: reg 30: [mem 0xfea00000-0xfea0ffff pref]
Dec 18 18:49:42 linux kernel: [ 0.222285] pci 0000:02:00.0: PME# supported from D3hot
Dec 18 18:49:42 linux kernel: [ 0.222322] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
Dec 18 18:49:42 linux kernel: [ 0.222348] pci 0000:02:00.1: reg 10: [io 0xd040-0xd047]
Dec 18 18:49:42 linux kernel: [ 0.222363] pci 0000:02:00.1: reg 14: [io 0xd030-0xd033]
Dec 18 18:49:42 linux kernel: [ 0.222377] pci 0000:02:00.1: reg 18: [io 0xd020-0xd027]
Dec 18 18:49:42 linux kernel: [ 0.222391] pci 0000:02:00.1: reg 1c: [io 0xd010-0xd013]
Dec 18 18:49:42 linux kernel: [ 0.222406] pci 0000:02:00.1: reg 20: [io 0xd000-0xd00f]
Dec 18 18:49:42 linux kernel: [ 0.222489] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Dec 18 18:49:42 linux kernel: [ 0.222546] pci 0000:00:06.0: PCI bridge to [bus 02]
Dec 18 18:49:42 linux kernel: [ 0.222590] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
Dec 18 18:49:42 linux kernel: [ 0.222596] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
Dec 18 18:49:42 linux kernel: [ 0.222673] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
Dec 18 18:49:42 linux kernel: [ 0.222723] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
Dec 18 18:49:42 linux kernel: [ 0.222727] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
Dec 18 18:49:42 linux kernel: [ 0.222731] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
Dec 18 18:49:42 linux kernel: [ 0.222735] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
Dec 18 18:49:42 linux kernel: [ 0.222740] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Dec 18 18:49:42 linux kernel: [ 0.222743] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
Dec 18 18:49:42 linux kernel: [ 0.222747] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
Dec 18 18:49:42 linux kernel: [ 0.222771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 18 18:49:42 linux kernel: [ 0.223275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
Dec 18 18:49:42 linux kernel: [ 0.223500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
Dec 18 18:49:42 linux kernel: [ 0.223598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR16._PRT]
Dec 18 18:49:42 linux kernel: [ 0.223729] pci0000:00: Requesting ACPI _OSC control (0x1d)
Dec 18 18:49:42 linux kernel: [ 0.223934] pci0000:00: ACPI _OSC control (0x1d) granted
Dec 18 18:49:42 linux kernel: [ 0.229248] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 18:49:42 linux kernel: [ 0.229609] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 18:49:42 linux kernel: [ 0.229974] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 18:49:42 linux kernel: [ 0.230337] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 18:49:42 linux kernel: [ 0.230686] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 18:49:42 linux kernel: [ 0.231020] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 18:49:42 linux kernel: [ 0.231355] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 18:49:42 linux kernel: [ 0.231687] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 18:49:42 linux kernel: [ 0.232092] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
Dec 18 18:49:42 linux kernel: [ 0.232131] vgaarb: loaded
Dec 18 18:49:42 linux kernel: [ 0.232162] vgaarb: bridge control possible 0000:00:01.0
Dec 18 18:49:42 linux kernel: [ 0.232351] SCSI subsystem initialized
Dec 18 18:49:42 linux kernel: [ 0.232383] ACPI: bus type scsi registered
Dec 18 18:49:42 linux kernel: [ 0.232457] libata version 3.00 loaded.
Dec 18 18:49:42 linux kernel: [ 0.232473] ACPI: bus type usb registered
Dec 18 18:49:42 linux kernel: [ 0.232521] usbcore: registered new interface driver usbfs
Dec 18 18:49:42 linux kernel: [ 0.232560] usbcore: registered new interface driver hub
Dec 18 18:49:42 linux kernel: [ 0.232613] usbcore: registered new device driver usb
Dec 18 18:49:42 linux kernel: [ 0.232713] PCI: Using ACPI for IRQ routing
Dec 18 18:49:42 linux kernel: [ 0.239775] PCI: pci_cache_line_size set to 64 bytes
Dec 18 18:49:42 linux kernel: [ 0.239836] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
Dec 18 18:49:42 linux kernel: [ 0.239838] e820: reserve RAM buffer [mem 0x9d6f1000-0x9fffffff]
Dec 18 18:49:42 linux kernel: [ 0.239839] e820: reserve RAM buffer [mem 0x9e9d4000-0x9fffffff]
Dec 18 18:49:42 linux kernel: [ 0.239841] e820: reserve RAM buffer [mem 0x9f04c000-0x9fffffff]
Dec 18 18:49:42 linux kernel: [ 0.239842] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
Dec 18 18:49:42 linux kernel: [ 0.239843] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
Dec 18 18:49:42 linux kernel: [ 0.239928] NetLabel: Initializing
Dec 18 18:49:42 linux kernel: [ 0.239959] NetLabel: domain hash size = 128
Dec 18 18:49:42 linux kernel: [ 0.239991] NetLabel: protocols = UNLABELED CIPSOv4
Dec 18 18:49:42 linux kernel: [ 0.240033] NetLabel: unlabeled traffic allowed by default
Dec 18 18:49:42 linux kernel: [ 0.240118] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Dec 18 18:49:42 linux kernel: [ 0.240261] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Dec 18 18:49:42 linux kernel: [ 0.242314] Switching to clocksource hpet
Dec 18 18:49:42 linux kernel: [ 0.247825] AppArmor: AppArmor Filesystem Enabled
Dec 18 18:49:42 linux kernel: [ 0.247884] pnp: PnP ACPI init
Dec 18 18:49:42 linux kernel: [ 0.247928] ACPI: bus type pnp registered
Dec 18 18:49:42 linux kernel: [ 0.248144] pnp 00:00: [bus 00-ff]
Dec 18 18:49:42 linux kernel: [ 0.248147] pnp 00:00: [io 0x0cf8-0x0cff]
Dec 18 18:49:42 linux kernel: [ 0.248149] pnp 00:00: [io 0x0000-0x03af window]
Dec 18 18:49:42 linux kernel: [ 0.248150] pnp 00:00: [io 0x03e0-0x0cf7 window]
Dec 18 18:49:42 linux kernel: [ 0.248152] pnp 00:00: [io 0x03b0-0x03df window]
Dec 18 18:49:42 linux kernel: [ 0.248153] pnp 00:00: [io 0x0d00-0xffff window]
Dec 18 18:49:42 linux kernel: [ 0.248155] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Dec 18 18:49:42 linux kernel: [ 0.248156] pnp 00:00: [mem 0x000c0000-0x000dffff window]
Dec 18 18:49:42 linux kernel: [ 0.248158] pnp 00:00: [mem 0xc0000000-0xffffffff window]
Dec 18 18:49:42 linux kernel: [ 0.248159] pnp 00:00: [mem 0x00000000 window]
Dec 18 18:49:42 linux kernel: [ 0.248187] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Dec 18 18:49:42 linux kernel: [ 0.248221] pnp 00:01: [mem 0xe0000000-0xefffffff]
Dec 18 18:49:42 linux kernel: [ 0.248254] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.248289] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
Dec 18 18:49:42 linux kernel: [ 0.248767] pnp 00:02: [io 0x0010-0x001f]
Dec 18 18:49:42 linux kernel: [ 0.248768] pnp 00:02: [io 0x0022-0x003f]
Dec 18 18:49:42 linux kernel: [ 0.248770] pnp 00:02: [io 0x0063]
Dec 18 18:49:42 linux kernel: [ 0.248773] pnp 00:02: [io 0x0065]
Dec 18 18:49:42 linux kernel: [ 0.248775] pnp 00:02: [io 0x0067-0x006f]
Dec 18 18:49:42 linux kernel: [ 0.248776] pnp 00:02: [io 0x0072-0x007f]
Dec 18 18:49:42 linux kernel: [ 0.248777] pnp 00:02: [io 0x0080]
Dec 18 18:49:42 linux kernel: [ 0.248778] pnp 00:02: [io 0x0084-0x0086]
Dec 18 18:49:42 linux kernel: [ 0.248780] pnp 00:02: [io 0x0088]
Dec 18 18:49:42 linux kernel: [ 0.248781] pnp 00:02: [io 0x008c-0x008e]
Dec 18 18:49:42 linux kernel: [ 0.248782] pnp 00:02: [io 0x0090-0x009f]
Dec 18 18:49:42 linux kernel: [ 0.248783] pnp 00:02: [io 0x00a2-0x00bf]
Dec 18 18:49:42 linux kernel: [ 0.248785] pnp 00:02: [io 0x00b1]
Dec 18 18:49:42 linux kernel: [ 0.248786] pnp 00:02: [io 0x00e0-0x00ef]
Dec 18 18:49:42 linux kernel: [ 0.248787] pnp 00:02: [io 0x04d0-0x04d1]
Dec 18 18:49:42 linux kernel: [ 0.248788] pnp 00:02: [io 0x040b]
Dec 18 18:49:42 linux kernel: [ 0.248790] pnp 00:02: [io 0x04d6]
Dec 18 18:49:42 linux kernel: [ 0.248791] pnp 00:02: [io 0x0c00-0x0c01]
Dec 18 18:49:42 linux kernel: [ 0.248792] pnp 00:02: [io 0x0c14]
Dec 18 18:49:42 linux kernel: [ 0.248793] pnp 00:02: [io 0x0c50-0x0c51]
Dec 18 18:49:42 linux kernel: [ 0.248795] pnp 00:02: [io 0x0c52]
Dec 18 18:49:42 linux kernel: [ 0.248796] pnp 00:02: [io 0x0c6c]
Dec 18 18:49:42 linux kernel: [ 0.248797] pnp 00:02: [io 0x0c6f]
Dec 18 18:49:42 linux kernel: [ 0.248798] pnp 00:02: [io 0x0cd0-0x0cd1]
Dec 18 18:49:42 linux kernel: [ 0.248800] pnp 00:02: [io 0x0cd2-0x0cd3]
Dec 18 18:49:42 linux kernel: [ 0.248801] pnp 00:02: [io 0x0cd4-0x0cd5]
Dec 18 18:49:42 linux kernel: [ 0.248802] pnp 00:02: [io 0x0cd6-0x0cd7]
Dec 18 18:49:42 linux kernel: [ 0.248803] pnp 00:02: [io 0x0cd8-0x0cdf]
Dec 18 18:49:42 linux kernel: [ 0.248805] pnp 00:02: [io 0x0800-0x089f]
Dec 18 18:49:42 linux kernel: [ 0.248806] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
Dec 18 18:49:42 linux kernel: [ 0.248808] pnp 00:02: [io 0x0000-0x000f]
Dec 18 18:49:42 linux kernel: [ 0.248809] pnp 00:02: [io 0x0b20-0x0b3f]
Dec 18 18:49:42 linux kernel: [ 0.248810] pnp 00:02: [io 0x0900-0x090f]
Dec 18 18:49:42 linux kernel: [ 0.248811] pnp 00:02: [io 0x0910-0x091f]
Dec 18 18:49:42 linux kernel: [ 0.248813] pnp 00:02: [io 0xfe00-0xfefe]
Dec 18 18:49:42 linux kernel: [ 0.248814] pnp 00:02: [io 0x0060-0x005f disabled]
Dec 18 18:49:42 linux kernel: [ 0.248816] pnp 00:02: [io 0x0064-0x0063 disabled]
Dec 18 18:49:42 linux kernel: [ 0.248817] pnp 00:02: [mem 0xfec00000-0xfec00fff]
Dec 18 18:49:42 linux kernel: [ 0.248818] pnp 00:02: [mem 0xfee00000-0xfee00fff]
Dec 18 18:49:42 linux kernel: [ 0.248820] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
Dec 18 18:49:42 linux kernel: [ 0.248821] pnp 00:02: [mem 0xfed61000-0xfed70fff]
Dec 18 18:49:42 linux kernel: [ 0.248823] pnp 00:02: [mem 0xfec10000-0xfec10fff]
Dec 18 18:49:42 linux kernel: [ 0.248824] pnp 00:02: [mem 0xfed00000-0xfed00fff]
Dec 18 18:49:42 linux kernel: [ 0.248825] pnp 00:02: [mem 0xff000000-0xffffffff]
Dec 18 18:49:42 linux kernel: [ 0.248884] system 00:02: [io 0x04d0-0x04d1] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.248918] system 00:02: [io 0x040b] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.248951] system 00:02: [io 0x04d6] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.248984] system 00:02: [io 0x0c00-0x0c01] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249017] system 00:02: [io 0x0c14] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249050] system 00:02: [io 0x0c50-0x0c51] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249082] system 00:02: [io 0x0c52] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249115] system 00:02: [io 0x0c6c] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249147] system 00:02: [io 0x0c6f] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249179] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249213] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249244] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249277] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249310] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249343] system 00:02: [io 0x0800-0x089f] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249375] system 00:02: [io 0x0b20-0x0b3f] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249408] system 00:02: [io 0x0900-0x090f] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249440] system 00:02: [io 0x0910-0x091f] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249473] system 00:02: [io 0xfe00-0xfefe] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249507] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
Dec 18 18:49:42 linux kernel: [ 0.249541] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249575] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249608] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249642] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249676] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249709] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249742] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 18:49:42 linux kernel: [ 0.249879] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
Dec 18 18:49:42 linux kernel: [ 0.249881] pnp 00:03: [io 0x0220-0x0227]
Dec 18 18:49:42 linux kernel: [ 0.249882] pnp 00:03: [io 0x0228-0x0237]
Dec 18 18:49:42 linux kernel: [ 0.249883] pnp 00:03: [io 0x0a20-0x0a2f]
Dec 18 18:49:42 linux kernel: [ 0.249908] system 00:03: [io 0x0220-0x0227] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249942] system 00:03: [io 0x0228-0x0237] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.249974] system 00:03: [io 0x0a20-0x0a2f] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.250008] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 18:49:42 linux kernel: [ 0.250029] pnp 00:04: [io 0x0060]
Dec 18 18:49:42 linux kernel: [ 0.250031] pnp 00:04: [io 0x0064]
Dec 18 18:49:42 linux kernel: [ 0.250040] pnp 00:04: [irq 1]
Dec 18 18:49:42 linux kernel: [ 0.250058] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Dec 18 18:49:42 linux kernel: [ 0.250236] pnp 00:05: [dma 4]
Dec 18 18:49:42 linux kernel: [ 0.250237] pnp 00:05: [io 0x0000-0x000f]
Dec 18 18:49:42 linux kernel: [ 0.250239] pnp 00:05: [io 0x0081-0x0083]
Dec 18 18:49:42 linux kernel: [ 0.250240] pnp 00:05: [io 0x0087]
Dec 18 18:49:42 linux kernel: [ 0.250242] pnp 00:05: [io 0x0089-0x008b]
Dec 18 18:49:42 linux kernel: [ 0.250243] pnp 00:05: [io 0x008f]
Dec 18 18:49:42 linux kernel: [ 0.250244] pnp 00:05: [io 0x00c0-0x00df]
Dec 18 18:49:42 linux kernel: [ 0.250260] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
Dec 18 18:49:42 linux kernel: [ 0.250269] pnp 00:06: [io 0x0070-0x0071]
Dec 18 18:49:42 linux kernel: [ 0.250273] pnp 00:06: [irq 8]
Dec 18 18:49:42 linux kernel: [ 0.250287] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
Dec 18 18:49:42 linux kernel: [ 0.250294] pnp 00:07: [io 0x0061]
Dec 18 18:49:42 linux kernel: [ 0.250310] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
Dec 18 18:49:42 linux kernel: [ 0.250332] pnp 00:08: [io 0x0010-0x001f]
Dec 18 18:49:42 linux kernel: [ 0.250346] pnp 00:08: [io 0x0022-0x003f]
Dec 18 18:49:42 linux kernel: [ 0.250348] pnp 00:08: [io 0x0044-0x005f]
Dec 18 18:49:42 linux kernel: [ 0.250349] pnp 00:08: [io 0x0072-0x007f]
Dec 18 18:49:42 linux kernel: [ 0.250351] pnp 00:08: [io 0x0080]
Dec 18 18:49:42 linux kernel: [ 0.250352] pnp 00:08: [io 0x0084-0x0086]
Dec 18 18:49:42 linux kernel: [ 0.250353] pnp 00:08: [io 0x0088]
Dec 18 18:49:42 linux kernel: [ 0.250354] pnp 00:08: [io 0x008c-0x008e]
Dec 18 18:49:42 linux kernel: [ 0.250356] pnp 00:08: [io 0x0090-0x009f]
Dec 18 18:49:42 linux kernel: [ 0.250357] pnp 00:08: [io 0x00a2-0x00bf]
Dec 18 18:49:42 linux kernel: [ 0.250358] pnp 00:08: [io 0x00e0-0x00ef]
Dec 18 18:49:42 linux kernel: [ 0.250360] pnp 00:08: [io 0x04d0-0x04d1]
Dec 18 18:49:42 linux kernel: [ 0.250388] system 00:08: [io 0x04d0-0x04d1] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.250423] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 18:49:42 linux kernel: [ 0.250431] pnp 00:09: [io 0x00f0-0x00ff]
Dec 18 18:49:42 linux kernel: [ 0.250435] pnp 00:09: [irq 13]
Dec 18 18:49:42 linux kernel: [ 0.250449] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
Dec 18 18:49:42 linux kernel: [ 0.250482] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 18:49:42 linux kernel: [ 0.250601] pnp 00:0b: [mem 0xa0000000-0xbfffffff]
Dec 18 18:49:42 linux kernel: [ 0.250624] system 00:0b: [mem 0xa0000000-0xbfffffff] has been reserved
Dec 18 18:49:42 linux kernel: [ 0.250658] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 18:49:42 linux kernel: [ 0.250703] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
Dec 18 18:49:42 linux kernel: [ 0.250728] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 18:49:42 linux kernel: [ 0.250864] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
Dec 18 18:49:42 linux kernel: [ 0.250882] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
Dec 18 18:49:42 linux kernel: [ 0.250885] pnp: PnP ACPI: found 14 devices
Dec 18 18:49:42 linux kernel: [ 0.250916] ACPI: ACPI bus type pnp unregistered
Dec 18 18:49:42 linux kernel: [ 0.257326] pci 0000:00:04.0: PCI bridge to [bus 01]
Dec 18 18:49:42 linux kernel: [ 0.257361] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
Dec 18 18:49:42 linux kernel: [ 0.257396] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
Dec 18 18:49:42 linux kernel: [ 0.257435] pci 0000:00:06.0: PCI bridge to [bus 02]
Dec 18 18:49:42 linux kernel: [ 0.257468] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
Dec 18 18:49:42 linux kernel: [ 0.257502] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
Dec 18 18:49:42 linux kernel: [ 0.257539] pci 0000:00:14.4: PCI bridge to [bus 03]
Dec 18 18:49:42 linux kernel: [ 0.257603] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
Dec 18 18:49:42 linux kernel: [ 0.257605] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
Dec 18 18:49:42 linux kernel: [ 0.257606] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
Dec 18 18:49:42 linux kernel: [ 0.257608] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
Dec 18 18:49:42 linux kernel: [ 0.257609] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
Dec 18 18:49:42 linux kernel: [ 0.257611] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
Dec 18 18:49:42 linux kernel: [ 0.257612] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
Dec 18 18:49:42 linux kernel: [ 0.257614] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
Dec 18 18:49:42 linux kernel: [ 0.257616] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
Dec 18 18:49:42 linux kernel: [ 0.257617] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
Dec 18 18:49:42 linux kernel: [ 0.257619] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
Dec 18 18:49:42 linux kernel: [ 0.257621] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
Dec 18 18:49:42 linux kernel: [ 0.257622] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
Dec 18 18:49:42 linux kernel: [ 0.257624] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
Dec 18 18:49:42 linux kernel: [ 0.257625] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
Dec 18 18:49:42 linux kernel: [ 0.257627] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
Dec 18 18:49:42 linux kernel: [ 0.257628] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
Dec 18 18:49:42 linux kernel: [ 0.257630] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
Dec 18 18:49:42 linux kernel: [ 0.257656] NET: Registered protocol family 2
Dec 18 18:49:42 linux kernel: [ 0.258338] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Dec 18 18:49:42 linux kernel: [ 0.260309] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Dec 18 18:49:42 linux kernel: [ 0.260568] TCP: Hash tables configured (established 524288 bind 65536)
Dec 18 18:49:42 linux kernel: [ 0.260638] TCP: reno registered
Dec 18 18:49:42 linux kernel: [ 0.260679] UDP hash table entries: 2048 (order: 4, 65536 bytes)
Dec 18 18:49:42 linux kernel: [ 0.260733] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Dec 18 18:49:42 linux kernel: [ 0.260838] NET: Registered protocol family 1
Dec 18 18:49:42 linux kernel: [ 0.260883] pci 0000:00:01.0: Boot video device
Dec 18 18:49:42 linux kernel: [ 0.513842] PCI: CLS 64 bytes, default 64
Dec 18 18:49:42 linux kernel: [ 0.513933] Trying to unpack rootfs image as initramfs...
Dec 18 18:49:42 linux kernel: [ 0.781078] Freeing initrd memory: 18332k freed
Dec 18 18:49:42 linux kernel: [ 0.785362] PCI-DMA: Disabling AGP.
Dec 18 18:49:42 linux kernel: [ 0.785397] PCI-DMA: More than 4GB of RAM and no IOMMU
Dec 18 18:49:42 linux kernel: [ 0.785397] falling back to iommu=soft.
Dec 18 18:49:42 linux kernel: [ 0.785434] More than 4GB of memory but GART IOMMU not available.
Dec 18 18:49:42 linux kernel: [ 0.785467] falling back to iommu=soft.
Dec 18 18:49:42 linux kernel: [ 0.785497] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Dec 18 18:49:42 linux kernel: [ 0.785531] software IO TLB [mem 0x996f1000-0x9d6f0fff] (64MB) mapped at [ffff8800996f1000-ffff88009d6f0fff]
Dec 18 18:49:42 linux kernel: [ 0.785655] LVT offset 0 assigned for vector 0x400
Dec 18 18:49:42 linux kernel: [ 0.785709] perf: AMD IBS detected (0x000000ff)
Dec 18 18:49:42 linux kernel: [ 0.785929] Initialise module verification
Dec 18 18:49:42 linux kernel: [ 0.785995] audit: initializing netlink socket (disabled)
Dec 18 18:49:42 linux kernel: [ 0.786036] type=2000 audit(1355852929.684:1): initialized
Dec 18 18:49:42 linux kernel: [ 0.808747] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Dec 18 18:49:42 linux kernel: [ 0.810169] VFS: Disk quotas dquot_6.5.2
Dec 18 18:49:42 linux kernel: [ 0.810234] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Dec 18 18:49:42 linux kernel: [ 0.810690] fuse init (API version 7.20)
Dec 18 18:49:42 linux kernel: [ 0.810785] msgmni has been set to 6661
Dec 18 18:49:42 linux kernel: [ 0.811145] Key type asymmetric registered
Dec 18 18:49:42 linux kernel: [ 0.811178] Asymmetric key parser 'x509' registered
Dec 18 18:49:42 linux kernel: [ 0.811237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Dec 18 18:49:42 linux kernel: [ 0.811297] io scheduler noop registered
Dec 18 18:49:42 linux kernel: [ 0.811329] io scheduler deadline registered (default)
Dec 18 18:49:42 linux kernel: [ 0.811364] io scheduler cfq registered
Dec 18 18:49:42 linux kernel: [ 0.811510] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 0.811572] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 0.811629] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
Dec 18 18:49:42 linux kernel: [ 0.811662] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
Dec 18 18:49:42 linux kernel: [ 0.811696] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
Dec 18 18:49:42 linux kernel: [ 0.811709] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
Dec 18 18:49:42 linux kernel: [ 0.811742] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
Dec 18 18:49:42 linux kernel: [ 0.811774] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
Dec 18 18:49:42 linux kernel: [ 0.811808] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
Dec 18 18:49:42 linux kernel: [ 0.811819] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Dec 18 18:49:42 linux kernel: [ 0.811865] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Dec 18 18:49:42 linux kernel: [ 0.811989] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Dec 18 18:49:42 linux kernel: [ 0.812027] ACPI: Power Button [PWRB]
Dec 18 18:49:42 linux kernel: [ 0.812088] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Dec 18 18:49:42 linux kernel: [ 0.812125] ACPI: Power Button [PWRF]
Dec 18 18:49:42 linux kernel: [ 0.812202] ACPI: acpi_idle registered with cpuidle
Dec 18 18:49:42 linux kernel: [ 0.827163] GHES: HEST is not enabled!
Dec 18 18:49:42 linux kernel: [ 0.827292] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Dec 18 18:49:42 linux kernel: [ 0.828509] Linux agpgart interface v0.103
Dec 18 18:49:42 linux kernel: [ 0.829681] brd: module loaded
Dec 18 18:49:42 linux kernel: [ 0.830297] loop: module loaded
Dec 18 18:49:42 linux kernel: [ 0.830424] ahci 0000:00:11.0: version 3.0
Dec 18 18:49:42 linux kernel: [ 0.830485] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 0.830591] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
Dec 18 18:49:42 linux kernel: [ 0.831767] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
Dec 18 18:49:42 linux kernel: [ 0.832619] scsi0 : ahci
Dec 18 18:49:42 linux kernel: [ 0.832728] scsi1 : ahci
Dec 18 18:49:42 linux kernel: [ 0.832815] scsi2 : ahci
Dec 18 18:49:42 linux kernel: [ 0.832898] scsi3 : ahci
Dec 18 18:49:42 linux kernel: [ 0.832992] scsi4 : ahci
Dec 18 18:49:42 linux kernel: [ 0.833071] scsi5 : ahci
Dec 18 18:49:42 linux kernel: [ 0.833160] scsi6 : ahci
Dec 18 18:49:42 linux kernel: [ 0.833246] scsi7 : ahci
Dec 18 18:49:42 linux kernel: [ 0.833310] ata1: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d100 irq 42
Dec 18 18:49:42 linux kernel: [ 0.833347] ata2: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d180 irq 42
Dec 18 18:49:42 linux kernel: [ 0.833384] ata3: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d200 irq 42
Dec 18 18:49:42 linux kernel: [ 0.833421] ata4: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d280 irq 42
Dec 18 18:49:42 linux kernel: [ 0.833458] ata5: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d300 irq 42
Dec 18 18:49:42 linux kernel: [ 0.833495] ata6: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d380 irq 42
Dec 18 18:49:42 linux kernel: [ 0.833532] ata7: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d400 irq 42
Dec 18 18:49:42 linux kernel: [ 0.833569] ata8: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d480 irq 42
Dec 18 18:49:42 linux kernel: [ 0.849015] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Dec 18 18:49:42 linux kernel: [ 0.849069] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Dec 18 18:49:42 linux kernel: [ 0.849669] scsi8 : ahci
Dec 18 18:49:42 linux kernel: [ 0.849847] scsi9 : ahci
Dec 18 18:49:42 linux kernel: [ 0.849963] ata9: SATA max UDMA/133 abar m8192@0xfea10000 port 0xfea10100 irq 18
Dec 18 18:49:42 linux kernel: [ 0.850009] ata10: SATA max UDMA/133 abar m8192@0xfea10000 port 0xfea10180 irq 18
Dec 18 18:49:42 linux kernel: [ 0.850167] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
Dec 18 18:49:42 linux kernel: [ 0.850252] pata_acpi 0000:02:00.1: setting latency timer to 64
Dec 18 18:49:42 linux kernel: [ 0.850756] libphy: Fixed MDIO Bus: probed
Dec 18 18:49:42 linux kernel: [ 0.850891] tun: Universal TUN/TAP device driver, 1.6
Dec 18 18:49:42 linux kernel: [ 0.850930] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Dec 18 18:49:42 linux kernel: [ 0.851083] PPP generic driver version 2.4.2
Dec 18 18:49:42 linux kernel: [ 0.851214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 18 18:49:42 linux kernel: [ 0.851318] ehci_hcd 0000:00:12.2: EHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.851365] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
Dec 18 18:49:42 linux kernel: [ 0.851431] QUIRK: Enable AMD PLL fix
Dec 18 18:49:42 linux kernel: [ 0.851435] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Dec 18 18:49:42 linux kernel: [ 0.851516] ehci_hcd 0000:00:12.2: debug port 1
Dec 18 18:49:42 linux kernel: [ 0.851580] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4b000
Dec 18 18:49:42 linux kernel: [ 0.860963] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
Dec 18 18:49:42 linux kernel: [ 0.861022] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Dec 18 18:49:42 linux kernel: [ 0.861054] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 0.861090] usb usb1: Product: EHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.861123] usb usb1: Manufacturer: Linux 3.7.0-030700-generic ehci_hcd
Dec 18 18:49:42 linux kernel: [ 0.861155] usb usb1: SerialNumber: 0000:00:12.2
Dec 18 18:49:42 linux kernel: [ 0.861309] hub 1-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 0.861342] hub 1-0:1.0: 5 ports detected
Dec 18 18:49:42 linux kernel: [ 0.861479] ehci_hcd 0000:00:13.2: EHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.861514] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
Dec 18 18:49:42 linux kernel: [ 0.861552] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Dec 18 18:49:42 linux kernel: [ 0.861608] ehci_hcd 0000:00:13.2: debug port 1
Dec 18 18:49:42 linux kernel: [ 0.861650] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb49000
Dec 18 18:49:42 linux kernel: [ 0.872935] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
Dec 18 18:49:42 linux kernel: [ 0.873044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Dec 18 18:49:42 linux kernel: [ 0.873088] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 0.873133] usb usb2: Product: EHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.873174] usb usb2: Manufacturer: Linux 3.7.0-030700-generic ehci_hcd
Dec 18 18:49:42 linux kernel: [ 0.873215] usb usb2: SerialNumber: 0000:00:13.2
Dec 18 18:49:42 linux kernel: [ 0.873469] hub 2-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 0.873513] hub 2-0:1.0: 5 ports detected
Dec 18 18:49:42 linux kernel: [ 0.873749] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 18 18:49:42 linux kernel: [ 0.873855] ohci_hcd 0000:00:12.0: OHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.873902] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
Dec 18 18:49:42 linux kernel: [ 0.873966] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
Dec 18 18:49:42 linux kernel: [ 0.932807] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Dec 18 18:49:42 linux kernel: [ 0.932844] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 0.932881] usb usb3: Product: OHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.932913] usb usb3: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
Dec 18 18:49:42 linux kernel: [ 0.932945] usb usb3: SerialNumber: 0000:00:12.0
Dec 18 18:49:42 linux kernel: [ 0.933101] hub 3-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 0.933138] hub 3-0:1.0: 5 ports detected
Dec 18 18:49:42 linux kernel: [ 0.933271] ohci_hcd 0000:00:13.0: OHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.933306] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
Dec 18 18:49:42 linux kernel: [ 0.933353] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4a000
Dec 18 18:49:42 linux kernel: [ 0.992678] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Dec 18 18:49:42 linux kernel: [ 0.992727] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 0.992773] usb usb4: Product: OHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.992814] usb usb4: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
Dec 18 18:49:42 linux kernel: [ 0.992855] usb usb4: SerialNumber: 0000:00:13.0
Dec 18 18:49:42 linux kernel: [ 0.993149] hub 4-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 0.993185] hub 4-0:1.0: 5 ports detected
Dec 18 18:49:42 linux kernel: [ 0.993314] ohci_hcd 0000:00:14.5: OHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 0.993350] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
Dec 18 18:49:42 linux kernel: [ 0.993398] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb48000
Dec 18 18:49:42 linux kernel: [ 1.052492] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Dec 18 18:49:42 linux kernel: [ 1.052530] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 1.052566] usb usb5: Product: OHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.052599] usb usb5: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
Dec 18 18:49:42 linux kernel: [ 1.052632] usb usb5: SerialNumber: 0000:00:14.5
Dec 18 18:49:42 linux kernel: [ 1.052779] hub 5-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 1.052815] hub 5-0:1.0: 2 ports detected
Dec 18 18:49:42 linux kernel: [ 1.052909] uhci_hcd: USB Universal Host Controller Interface driver
Dec 18 18:49:42 linux kernel: [ 1.052989] xhci_hcd 0000:00:10.0: xHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.053024] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
Dec 18 18:49:42 linux kernel: [ 1.053242] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb46000
Dec 18 18:49:42 linux kernel: [ 1.053320] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 1.053325] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 1.053329] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 1.053390] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
Dec 18 18:49:42 linux kernel: [ 1.053423] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 1.053459] usb usb6: Product: xHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.053492] usb usb6: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
Dec 18 18:49:42 linux kernel: [ 1.053524] usb usb6: SerialNumber: 0000:00:10.0
Dec 18 18:49:42 linux kernel: [ 1.053608] xHCI xhci_add_endpoint called for root hub
Dec 18 18:49:42 linux kernel: [ 1.053609] xHCI xhci_check_bandwidth called for root hub
Dec 18 18:49:42 linux kernel: [ 1.053625] hub 6-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 1.053660] hub 6-0:1.0: 2 ports detected
Dec 18 18:49:42 linux kernel: [ 1.053747] xhci_hcd 0000:00:10.0: xHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.053781] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
Dec 18 18:49:42 linux kernel: [ 1.056655] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
Dec 18 18:49:42 linux kernel: [ 1.056688] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 1.056724] usb usb7: Product: xHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.056757] usb usb7: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
Dec 18 18:49:42 linux kernel: [ 1.056789] usb usb7: SerialNumber: 0000:00:10.0
Dec 18 18:49:42 linux kernel: [ 1.056870] xHCI xhci_add_endpoint called for root hub
Dec 18 18:49:42 linux kernel: [ 1.056871] xHCI xhci_check_bandwidth called for root hub
Dec 18 18:49:42 linux kernel: [ 1.056888] hub 7-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 1.056923] hub 7-0:1.0: 2 ports detected
Dec 18 18:49:42 linux kernel: [ 1.057038] xhci_hcd 0000:00:10.1: xHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.057072] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
Dec 18 18:49:42 linux kernel: [ 1.057287] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb44000
Dec 18 18:49:42 linux kernel: [ 1.057359] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 1.057364] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 1.057368] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 1.057427] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
Dec 18 18:49:42 linux kernel: [ 1.057460] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 1.057496] usb usb8: Product: xHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.057528] usb usb8: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
Dec 18 18:49:42 linux kernel: [ 1.057560] usb usb8: SerialNumber: 0000:00:10.1
Dec 18 18:49:42 linux kernel: [ 1.057648] xHCI xhci_add_endpoint called for root hub
Dec 18 18:49:42 linux kernel: [ 1.057649] xHCI xhci_check_bandwidth called for root hub
Dec 18 18:49:42 linux kernel: [ 1.057666] hub 8-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 1.057702] hub 8-0:1.0: 2 ports detected
Dec 18 18:49:42 linux kernel: [ 1.057785] xhci_hcd 0000:00:10.1: xHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.057818] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
Dec 18 18:49:42 linux kernel: [ 1.060699] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
Dec 18 18:49:42 linux kernel: [ 1.060732] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 18:49:42 linux kernel: [ 1.060767] usb usb9: Product: xHCI Host Controller
Dec 18 18:49:42 linux kernel: [ 1.060799] usb usb9: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
Dec 18 18:49:42 linux kernel: [ 1.060832] usb usb9: SerialNumber: 0000:00:10.1
Dec 18 18:49:42 linux kernel: [ 1.060920] xHCI xhci_add_endpoint called for root hub
Dec 18 18:49:42 linux kernel: [ 1.060921] xHCI xhci_check_bandwidth called for root hub
Dec 18 18:49:42 linux kernel: [ 1.060938] hub 9-0:1.0: USB hub found
Dec 18 18:49:42 linux kernel: [ 1.060973] hub 9-0:1.0: 2 ports detected
Dec 18 18:49:42 linux kernel: [ 1.061137] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Dec 18 18:49:42 linux kernel: [ 1.061169] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Dec 18 18:49:42 linux kernel: [ 1.061316] serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 18 18:49:42 linux kernel: [ 1.061428] mousedev: PS/2 mouse device common for all mice
Dec 18 18:49:42 linux kernel: [ 1.061567] rtc_cmos 00:06: RTC can wake from S4
Dec 18 18:49:42 linux kernel: [ 1.061691] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Dec 18 18:49:42 linux kernel: [ 1.061742] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Dec 18 18:49:42 linux kernel: [ 1.061845] device-mapper: uevent: version 1.0.3
Dec 18 18:49:42 linux kernel: [ 1.061930] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
Dec 18 18:49:42 linux kernel: [ 1.061992] cpuidle: using governor ladder
Dec 18 18:49:42 linux kernel: [ 1.062057] cpuidle: using governor menu
Dec 18 18:49:42 linux kernel: [ 1.062090] ledtrig-cpu: registered to indicate activity on CPUs
Dec 18 18:49:42 linux kernel: [ 1.062123] EFI Variables Facility v0.08 2004-May-17
Dec 18 18:49:42 linux kernel: [ 1.062322] ashmem: initialized
Dec 18 18:49:42 linux kernel: [ 1.062446] TCP: cubic registered
Dec 18 18:49:42 linux kernel: [ 1.062553] NET: Registered protocol family 10
Dec 18 18:49:42 linux kernel: [ 1.062716] NET: Registered protocol family 17
Dec 18 18:49:42 linux kernel: [ 1.062755] Key type dns_resolver registered
Dec 18 18:49:42 linux kernel: [ 1.063027] PM: Hibernation image not present or could not be loaded.
Dec 18 18:49:42 linux kernel: [ 1.063028] Loading module verification certificates
Dec 18 18:49:42 linux kernel: [ 1.063858] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e3c9ba861fdbed41d7ed913516075eb74194d8e6'
Dec 18 18:49:42 linux kernel: [ 1.065095] registered taskstats version 1
Dec 18 18:49:42 linux kernel: [ 1.066821] Key type trusted registered
Dec 18 18:49:42 linux kernel: [ 1.068237] Key type encrypted registered
Dec 18 18:49:42 linux kernel: [ 1.069995] Magic number: 8:979:845
Dec 18 18:49:42 linux kernel: [ 1.070110] rtc_cmos 00:06: setting system clock to 2012-12-18 17:48:50 UTC (1355852930)
Dec 18 18:49:42 linux kernel: [ 1.070188] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
Dec 18 18:49:42 linux kernel: [ 1.071014] acpi-cpufreq: overriding BIOS provided _PSD data
Dec 18 18:49:42 linux kernel: [ 1.071153] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Dec 18 18:49:42 linux kernel: [ 1.071185] EDD information not available.
Dec 18 18:49:42 linux kernel: [ 1.080176] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Dec 18 18:49:42 linux kernel: [ 1.323864] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.323919] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.323966] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.324013] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.324059] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.324106] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.324152] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.324200] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.324931] ata4.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.324979] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.325128] ata4.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.325953] ata4.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.325963] ata4.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.330357] ata5.00: HPA detected: current 3907027055, native 3907029168
Dec 18 18:49:42 linux kernel: [ 1.330408] ata6.00: HPA detected: current 3907027055, native 3907029168
Dec 18 18:49:42 linux kernel: [ 1.330453] ata3.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.330493] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.330533] ata8.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.330567] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.330607] ata6.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.330641] ata6.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.330680] ata5.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.330720] ata5.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.330759] ata7.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.330793] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.330832] ata1.00: HPA detected: current 976771055, native 976773168
Dec 18 18:49:42 linux kernel: [ 1.330913] ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.330945] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.331123] ata7.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.332210] ata8.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.332236] ata3.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.332259] ata6.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.332348] ata5.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.332364] ata2.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.332480] ata1.00: ATA-8: SAMSUNG HM500LI, 2TF00_00, max UDMA7
Dec 18 18:49:42 linux kernel: [ 1.332525] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.337532] ata7.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.337547] ata7.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.339171] ata1.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.339821] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.339895] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 18:49:42 linux kernel: [ 1.340706] ata2.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.340719] ata2.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.340859] ata3.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.340868] ata3.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.340928] ata6.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.340935] ata6.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.340994] ata5.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.341002] ata5.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.341060] ata8.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.341067] ata8.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.345783] ata9.00: HPA detected: current 3907027055, native 3907029168
Dec 18 18:49:42 linux kernel: [ 1.345913] ata9.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.345958] ata9.00: 3907027055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.346010] ata10.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.346054] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Dec 18 18:49:42 linux kernel: [ 1.346315] ata9.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.346413] ata10.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.350925] ata1.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.350932] ata1.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.351087] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500LI 2TF0 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.351318] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
Dec 18 18:49:42 linux kernel: [ 1.351333] sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 18 18:49:42 linux kernel: [ 1.351429] sd 0:0:0:0: [sda] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.351464] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.351482] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.351644] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.351843] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 18:49:42 linux kernel: [ 1.351900] sd 1:0:0:0: Attached scsi generic sg1 type 0
Dec 18 18:49:42 linux kernel: [ 1.351956] sd 1:0:0:0: [sdb] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.351990] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.352006] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.352221] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.352434] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 18:49:42 linux kernel: [ 1.352479] sd 2:0:0:0: Attached scsi generic sg2 type 0
Dec 18 18:49:42 linux kernel: [ 1.352538] sd 2:0:0:0: [sdc] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.352572] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.352590] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.352678] ata10.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.352682] ata10.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.352804] scsi 3:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.352977] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Dec 18 18:49:42 linux kernel: [ 1.353018] sd 3:0:0:0: [sdd] 4096-byte physical blocks
Dec 18 18:49:42 linux kernel: [ 1.353097] sd 3:0:0:0: Attached scsi generic sg3 type 0
Dec 18 18:49:42 linux kernel: [ 1.353141] sd 3:0:0:0: [sdd] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.353176] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.353194] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.353359] ata9.00: failed to get Identify Device Data, Emask 0x1
Dec 18 18:49:42 linux kernel: [ 1.353363] ata9.00: configured for UDMA/133
Dec 18 18:49:42 linux kernel: [ 1.353425] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.353613] sd 4:0:0:0: [sde] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 18:49:42 linux kernel: [ 1.353658] sd 4:0:0:0: Attached scsi generic sg4 type 0
Dec 18 18:49:42 linux kernel: [ 1.353715] sd 4:0:0:0: [sde] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.353750] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.353768] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.353942] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.354128] sd 5:0:0:0: [sdf] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 18:49:42 linux kernel: [ 1.354191] sd 5:0:0:0: Attached scsi generic sg5 type 0
Dec 18 18:49:42 linux kernel: [ 1.354233] sd 5:0:0:0: [sdf] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.354268] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.354285] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.354469] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.354654] sd 6:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 18:49:42 linux kernel: [ 1.354704] sd 6:0:0:0: Attached scsi generic sg6 type 0
Dec 18 18:49:42 linux kernel: [ 1.354756] sd 6:0:0:0: [sdg] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.354791] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.354808] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.354988] scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.355170] sd 7:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 18:49:42 linux kernel: [ 1.355219] sd 7:0:0:0: Attached scsi generic sg7 type 0
Dec 18 18:49:42 linux kernel: [ 1.355273] sd 7:0:0:0: [sdh] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.355307] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.355325] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.355503] scsi 8:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.355633] sd 8:0:0:0: [sdi] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 18:49:42 linux kernel: [ 1.355720] sd 8:0:0:0: Attached scsi generic sg8 type 0
Dec 18 18:49:42 linux kernel: [ 1.355755] sd 8:0:0:0: [sdi] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.355790] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.355812] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.355905] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
Dec 18 18:49:42 linux kernel: [ 1.356070] sd 9:0:0:0: Attached scsi generic sg9 type 0
Dec 18 18:49:42 linux kernel: [ 1.356118] sd 9:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 18:49:42 linux kernel: [ 1.356234] sd 9:0:0:0: [sdj] Write Protect is off
Dec 18 18:49:42 linux kernel: [ 1.356269] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00
Dec 18 18:49:42 linux kernel: [ 1.356296] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 18:49:42 linux kernel: [ 1.356966] sdf: sdf1
Dec 18 18:49:42 linux kernel: [ 1.357186] sd 5:0:0:0: [sdf] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.358358] sdb: sdb1
Dec 18 18:49:42 linux kernel: [ 1.358581] sd 1:0:0:0: [sdb] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.361784] sdc: sdc1
Dec 18 18:49:42 linux kernel: [ 1.362314] sd 2:0:0:0: [sdc] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.363793] sdg: sdg1
Dec 18 18:49:42 linux kernel: [ 1.364122] sd 6:0:0:0: [sdg] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.365919] sdj: sdj1
Dec 18 18:49:42 linux kernel: [ 1.366210] sd 9:0:0:0: [sdj] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.366370] sdh: sdh1
Dec 18 18:49:42 linux kernel: [ 1.366570] sd 7:0:0:0: [sdh] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.368019] sde: sde1
Dec 18 18:49:42 linux kernel: [ 1.368548] sd 4:0:0:0: [sde] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.373506] sdi: sdi1
Dec 18 18:49:42 linux kernel: [ 1.374006] sd 8:0:0:0: [sdi] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.378299] sda: sda1 sda2 sda3
Dec 18 18:49:42 linux kernel: [ 1.378636] sd 0:0:0:0: [sda] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.392452] sdd: sdd1 sdd2
Dec 18 18:49:42 linux kernel: [ 1.392755] sd 3:0:0:0: [sdd] Attached SCSI disk
Dec 18 18:49:42 linux kernel: [ 1.395193] Freeing unused kernel memory: 992k freed
Dec 18 18:49:42 linux kernel: [ 1.395434] Write protecting the kernel read-only data: 12288k
Dec 18 18:49:42 linux kernel: [ 1.400718] Freeing unused kernel memory: 1176k freed
Dec 18 18:49:42 linux kernel: [ 1.405368] Freeing unused kernel memory: 968k freed
Dec 18 18:49:42 linux kernel: [ 1.479984] Disabling lock debugging due to kernel taint
Dec 18 18:49:42 linux kernel: [ 1.480536] r8168 Gigabit Ethernet driver 8.034.00-NAPI loaded
Dec 18 18:49:42 linux kernel: [ 1.480660] r8168 0000:01:00.0: irq 49 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 1.480935] eth%d: RTL8168E-VL/8111E-VL at 0xffffc90000668000, 94:de:80:06:0b:ac, IRQ 49
Dec 18 18:49:42 linux kernel: [ 1.657444] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
Dec 18 18:49:42 linux kernel: [ 1.658718] eth0: Identified chip type is 'RTL8168E-VL/8111E-VL'.
Dec 18 18:49:42 linux kernel: [ 1.658720] r8168 Copyright (C) 2012 Realtek NIC software team <nicfae@realtek.com>
Dec 18 18:49:42 linux kernel: [ 1.658720] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
Dec 18 18:49:42 linux kernel: [ 1.658720] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
Dec 18 18:49:42 linux kernel: [ 1.681396] [drm] Initialized drm 1.1.0 20060810
Dec 18 18:49:42 linux kernel: [ 1.724668] [drm] VGACON disable radeon kernel modesetting.
Dec 18 18:49:42 linux kernel: [ 1.726652] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Dec 18 18:49:42 linux kernel: [ 1.726706] [drm] No driver support for vblank timestamp query.
Dec 18 18:49:42 linux kernel: [ 1.726742] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:01.0 on minor 0
Dec 18 18:49:42 linux kernel: [ 1.782667] tsc: Refined TSC clocksource calibration: 3393.828 MHz
Dec 18 18:49:42 linux kernel: [ 1.782707] Switching to clocksource tsc
Dec 18 18:49:42 linux kernel: [ 1.788156] pata_jmicron 0000:02:00.1: setting latency timer to 64
Dec 18 18:49:42 linux kernel: [ 1.788472] scsi10 : pata_jmicron
Dec 18 18:49:42 linux kernel: [ 1.788575] scsi11 : pata_jmicron
Dec 18 18:49:42 linux kernel: [ 1.788653] ata11: PATA max UDMA/100 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 19
Dec 18 18:49:42 linux kernel: [ 1.788691] ata12: PATA max UDMA/100 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 19
Dec 18 18:49:42 linux kernel: [ 22.908992] bio: create slab <bio-1> at 1
Dec 18 18:49:42 linux kernel: [ 23.064180] bio: create slab <bio-1> at 1
Dec 18 18:49:42 linux kernel: [ 28.566668] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
Dec 18 18:49:42 linux kernel: [ 28.566673] PM: Marking nosave pages: [mem 0x9d6f1000-0x9e9d2fff]
Dec 18 18:49:42 linux kernel: [ 28.566749] PM: Marking nosave pages: [mem 0x9e9d4000-0x9ebd9fff]
Dec 18 18:49:42 linux kernel: [ 28.566758] PM: Marking nosave pages: [mem 0x9f04c000-0x9f7dcfff]
Dec 18 18:49:42 linux kernel: [ 28.566788] PM: Marking nosave pages: [mem 0x9f800000-0x100000fff]
Dec 18 18:49:42 linux kernel: [ 28.567513] PM: Marking nosave pages: [mem 0x94000000-0x97ffffff]
Dec 18 18:49:42 linux kernel: [ 28.567765] PM: Basic memory bitmaps created
Dec 18 18:49:42 linux kernel: [ 28.595538] PM: Basic memory bitmaps freed
Dec 18 18:49:42 linux kernel: [ 28.695115] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Dec 18 18:49:42 linux kernel: [ 34.153954] microcode: CPU0: patch_level=0x06001116
Dec 18 18:49:42 linux kernel: [ 34.503772] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
Dec 18 18:49:42 linux kernel: [ 34.503819] microcode: CPU1: patch_level=0x06001116
Dec 18 18:49:42 linux kernel: [ 34.503898] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Dec 18 18:49:42 linux kernel: [ 35.382880] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Dec 18 18:49:42 linux kernel: [ 36.128378] kvm: Nested Virtualization enabled
Dec 18 18:49:42 linux kernel: [ 36.128417] kvm: Nested Paging enabled
Dec 18 18:49:42 linux kernel: [ 37.058095] hda-intel: Force to non-snoop mode
Dec 18 18:49:42 linux kernel: [ 37.058311] snd_hda_intel 0000:00:01.1: irq 50 for MSI/MSI-X
Dec 18 18:49:42 linux kernel: [ 37.197714] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
Dec 18 18:49:42 linux kernel: [ 43.214339] lp: driver loaded but no devices found
Dec 18 18:49:42 linux kernel: [ 47.274157] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
Dec 18 18:49:42 linux kernel: [ 49.616336] Adding 2097148k swap on /root/myswapfile. Priority:-1 extents:16 across:3932156k
Dec 18 18:51:39 linux kernel: [ 169.204629] type=1400 audit(1355853099.037:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1642 comm="apparmor_parser"
Dec 18 18:51:39 linux kernel: [ 169.300320] type=1400 audit(1355853099.133:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1641 comm="apparmor_parser"
Dec 18 18:51:39 linux kernel: [ 169.300674] type=1400 audit(1355853099.133:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1641 comm="apparmor_parser"
Dec 18 18:51:39 linux kernel: [ 169.300820] type=1400 audit(1355853099.133:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1641 comm="apparmor_parser"
Dec 18 18:51:39 linux kernel: [ 169.332713] type=1400 audit(1355853099.165:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1644 comm="apparmor_parser"
Dec 18 18:51:39 linux kernel: [ 170.129836] type=1400 audit(1355853099.965:7): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1695 comm="apparmor_parser"
Dec 18 18:51:43 linux kernel: [ 173.467306] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Dec 18 18:51:43 linux kernel: [ 173.481708] XFS (dm-3): Mounting Filesystem
Dec 18 18:51:43 linux kernel: [ 173.627173] XFS (dm-3): Ending clean mount
Dec 18 18:51:44 linux kernel: [ 174.486292] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
Dec 18 18:51:45 linux kernel: [ 175.317824] EXT4-fs (dm-5): warning: mounting unchecked fs, running e2fsck is recommended
Dec 18 18:51:45 linux kernel: [ 175.319673] EXT4-fs (dm-5): mounted filesystem without journal. Opts: (null)
Dec 18 18:51:45 linux kernel: [ 175.826725] EXT4-fs (dm-6): warning: maximal mount count reached, running e2fsck is recommended
Dec 18 18:51:45 linux kernel: [ 175.829244] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
Dec 18 18:51:46 linux kernel: [ 176.724962] EXT4-fs (dm-7): warning: maximal mount count reached, running e2fsck is recommended
Dec 18 18:51:46 linux kernel: [ 176.726899] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
Dec 18 18:51:47 linux kernel: [ 177.254200] kjournald starting. Commit interval 5 seconds
Dec 18 18:51:47 linux kernel: [ 177.255120] EXT3-fs (dm-8): warning: maximal mount count reached, running e2fsck is recommended
Dec 18 18:51:47 linux kernel: [ 177.255635] EXT3-fs (dm-8): using internal journal
Dec 18 18:51:47 linux kernel: [ 177.255638] EXT3-fs (dm-8): mounted filesystem with ordered data mode
Dec 18 18:51:48 linux kernel: [ 178.175861] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended
Dec 18 18:51:48 linux kernel: [ 178.177746] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
Dec 18 18:51:48 linux kernel: [ 178.852948] type=1400 audit(1355853108.709:8): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2152 comm="apparmor_parser"
Dec 18 18:51:48 linux kernel: [ 179.126686] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
Dec 18 18:51:49 linux kernel: [ 180.113755] EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null)
Dec 18 18:51:50 linux kernel: [ 180.886181] XFS (dm-12): Mounting Filesystem
Dec 18 18:51:50 linux kernel: [ 180.888690] type=1400 audit(1355853110.749:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2298 comm="apparmor_parser"
Dec 18 18:51:51 linux kernel: [ 181.591705] XFS (dm-12): Ending clean mount
Dec 18 18:51:53 linux kernel: [ 183.926677] type=1400 audit(1355853113.793:10): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2582 comm="apparmor_parser"
Dec 18 18:51:56 linux kernel: [ 186.962247] type=1400 audit(1355853116.837:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2686 comm="apparmor_parser"
Dec 18 18:51:59 linux kernel: [ 190.000114] type=1400 audit(1355853119.881:12): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2781 comm="apparmor_parser"
Dec 18 18:52:01 linux kernel: [ 192.032617] type=1400 audit(1355853121.917:13): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2832 comm="apparmor_parser"
Dec 18 18:52:03 linux kernel: [ 194.061774] type=1400 audit(1355853123.953:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2883 comm="apparmor_parser"
Dec 18 18:52:05 linux kernel: [ 196.093564] type=1400 audit(1355853125.989:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=2934 comm="apparmor_parser"
[-- Attachment #3: boot_recovery_with_net.log --]
[-- Type: application/octet-stream, Size: 92388 bytes --]
Dec 18 19:04:59 linux kernel: imklog 5.8.6, log source = /proc/kmsg started.
Dec 18 19:04:59 linux kernel: [ 0.000000] Initializing cgroup subsys cpuset
Dec 18 19:04:59 linux kernel: [ 0.000000] Initializing cgroup subsys cpu
Dec 18 19:04:59 linux kernel: [ 0.000000] Linux version 3.7.0-030700-generic (root@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201212102335 SMP Tue Dec 11 04:36:24 UTC 2012
Dec 18 19:04:59 linux kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.7.0-030700-generic root=/dev/mapper/linux-OS ro recovery nomodeset
Dec 18 19:04:59 linux kernel: [ 0.000000] KERNEL supported cpus:
Dec 18 19:04:59 linux kernel: [ 0.000000] Intel GenuineIntel
Dec 18 19:04:59 linux kernel: [ 0.000000] AMD AuthenticAMD
Dec 18 19:04:59 linux kernel: [ 0.000000] Centaur CentaurHauls
Dec 18 19:04:59 linux kernel: [ 0.000000] e820: BIOS-provided physical RAM map:
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d6f0fff] usable
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009d6f1000-0x000000009d9d1fff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009d9d2000-0x000000009dd28fff] ACPI NVS
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009dd29000-0x000000009e9d2fff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009e9d3000-0x000000009e9d3fff] usable
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009e9d4000-0x000000009ebd9fff] ACPI NVS
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009ebda000-0x000000009f04bfff] usable
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009f04c000-0x000000009f7dcfff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x000000009f7dd000-0x000000009f7fffff] usable
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
Dec 18 19:04:59 linux kernel: [ 0.000000] NX (Execute Disable) protection: active
Dec 18 19:04:59 linux kernel: [ 0.000000] DMI 2.7 present.
Dec 18 19:04:59 linux kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-D3H, BIOS F1 10/09/2012
Dec 18 19:04:59 linux kernel: [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
Dec 18 19:04:59 linux kernel: [ 0.000000] No AGP bridge found
Dec 18 19:04:59 linux kernel: [ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
Dec 18 19:04:59 linux kernel: [ 0.000000] MTRR default type: uncachable
Dec 18 19:04:59 linux kernel: [ 0.000000] MTRR fixed ranges enabled:
Dec 18 19:04:59 linux kernel: [ 0.000000] 00000-9FFFF write-back
Dec 18 19:04:59 linux kernel: [ 0.000000] A0000-BFFFF write-through
Dec 18 19:04:59 linux kernel: [ 0.000000] C0000-D2FFF write-protect
Dec 18 19:04:59 linux kernel: [ 0.000000] D3000-E7FFF uncachable
Dec 18 19:04:59 linux kernel: [ 0.000000] E8000-FFFFF write-protect
Dec 18 19:04:59 linux kernel: [ 0.000000] MTRR variable ranges enabled:
Dec 18 19:04:59 linux kernel: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
Dec 18 19:04:59 linux kernel: [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
Dec 18 19:04:59 linux kernel: [ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
Dec 18 19:04:59 linux kernel: [ 0.000000] 3 disabled
Dec 18 19:04:59 linux kernel: [ 0.000000] 4 disabled
Dec 18 19:04:59 linux kernel: [ 0.000000] 5 disabled
Dec 18 19:04:59 linux kernel: [ 0.000000] 6 disabled
Dec 18 19:04:59 linux kernel: [ 0.000000] 7 disabled
Dec 18 19:04:59 linux kernel: [ 0.000000] TOM2: 000000013f000000 aka 5104M
Dec 18 19:04:59 linux kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Dec 18 19:04:59 linux kernel: [ 0.000000] original variable MTRRs
Dec 18 19:04:59 linux kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
Dec 18 19:04:59 linux kernel: [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
Dec 18 19:04:59 linux kernel: [ 0.000000] reg 2, base: 2552MB, range: 8MB, type UC
Dec 18 19:04:59 linux kernel: [ 0.000000] total RAM covered: 2552M
Dec 18 19:04:59 linux kernel: [ 0.000000] Found optimal setting for mtrr clean up
Dec 18 19:04:59 linux kernel: [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
Dec 18 19:04:59 linux kernel: [ 0.000000] New variable MTRRs
Dec 18 19:04:59 linux kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
Dec 18 19:04:59 linux kernel: [ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
Dec 18 19:04:59 linux kernel: [ 0.000000] reg 2, base: 2552MB, range: 8MB, type UC
Dec 18 19:04:59 linux kernel: [ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
Dec 18 19:04:59 linux kernel: [ 0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
Dec 18 19:04:59 linux kernel: [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
Dec 18 19:04:59 linux kernel: [ 0.000000] Using GB pages for direct mapping
Dec 18 19:04:59 linux kernel: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x9f7fffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] [mem 0x00000000-0x7fffffff] page 1G
Dec 18 19:04:59 linux kernel: [ 0.000000] [mem 0x80000000-0x9f7fffff] page 2M
Dec 18 19:04:59 linux kernel: [ 0.000000] kernel direct mapping tables up to 0x9f7fffff @ [mem 0x1fffe000-0x1fffffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] init_memory_mapping: [mem 0x100001000-0x13effffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
Dec 18 19:04:59 linux kernel: [ 0.000000] [mem 0x100200000-0x13effffff] page 2M
Dec 18 19:04:59 linux kernel: [ 0.000000] kernel direct mapping tables up to 0x13effffff @ [mem 0x9f7fd000-0x9f7fffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] RAMDISK: [mem 0x35c22000-0x36e08fff]
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: XSDT 000000009dd13078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: FACP 000000009dd18f88 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120913/tbfadt-598)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: DSDT 000000009dd13188 05DFE (v02 ALASKA A M I 00000000 INTL 20051117)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: FACS 000000009dd21d80 00040
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: APIC 000000009dd19080 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: FPDT 000000009dd190f8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: MCFG 000000009dd19140 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: HPET 000000009dd19180 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: IFEU 000000009dd191b8 00042 (v01 ALASKA A M I 01072009 00000000)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: BGRT 000000009dd19200 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: SSDT 000000009dd19238 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: SSDT 000000009dd198f0 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: CRAT 000000009dd19da8 001F8 (v01 AMD AGESA 00000001 AMD 00000001)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Dec 18 19:04:59 linux kernel: [ 0.000000] No NUMA configuration found
Dec 18 19:04:59 linux kernel: [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13effffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] NODE_DATA [mem 0x13effc000-0x13effffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013e5fffff] on node 0
Dec 18 19:04:59 linux kernel: [ 0.000000] Zone ranges:
Dec 18 19:04:59 linux kernel: [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] Normal [mem 0x100000000-0x13effffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] Movable zone start for each node
Dec 18 19:04:59 linux kernel: [ 0.000000] Early memory node ranges
Dec 18 19:04:59 linux kernel: [ 0.000000] node 0: [mem 0x00010000-0x0009dfff]
Dec 18 19:04:59 linux kernel: [ 0.000000] node 0: [mem 0x00100000-0x9d6f0fff]
Dec 18 19:04:59 linux kernel: [ 0.000000] node 0: [mem 0x9e9d3000-0x9e9d3fff]
Dec 18 19:04:59 linux kernel: [ 0.000000] node 0: [mem 0x9ebda000-0x9f04bfff]
Dec 18 19:04:59 linux kernel: [ 0.000000] node 0: [mem 0x9f7dd000-0x9f7fffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] node 0: [mem 0x100001000-0x13effffff]
Dec 18 19:04:59 linux kernel: [ 0.000000] On node 0 totalpages: 903956
Dec 18 19:04:59 linux kernel: [ 0.000000] DMA zone: 64 pages used for memmap
Dec 18 19:04:59 linux kernel: [ 0.000000] DMA zone: 6 pages reserved
Dec 18 19:04:59 linux kernel: [ 0.000000] DMA zone: 3912 pages, LIFO batch:0
Dec 18 19:04:59 linux kernel: [ 0.000000] DMA32 zone: 16320 pages used for memmap
Dec 18 19:04:59 linux kernel: [ 0.000000] DMA32 zone: 625607 pages, LIFO batch:31
Dec 18 19:04:59 linux kernel: [ 0.000000] Normal zone: 4032 pages used for memmap
Dec 18 19:04:59 linux kernel: [ 0.000000] Normal zone: 254015 pages, LIFO batch:31
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
Dec 18 19:04:59 linux kernel: [ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: IRQ0 used by override.
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: IRQ2 used by override.
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: IRQ9 used by override.
Dec 18 19:04:59 linux kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Dec 18 19:04:59 linux kernel: [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
Dec 18 19:04:59 linux kernel: [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
Dec 18 19:04:59 linux kernel: [ 0.000000] nr_irqs_gsi: 40
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009d6f1000 - 000000009d9d2000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009d9d2000 - 000000009dd29000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009dd29000 - 000000009e9d3000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009e9d4000 - 000000009ebda000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009f04c000 - 000000009f7dd000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
Dec 18 19:04:59 linux kernel: [ 0.000000] e820: [mem 0x9f800000-0xfebfffff] available for PCI devices
Dec 18 19:04:59 linux kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Dec 18 19:04:59 linux kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
Dec 18 19:04:59 linux kernel: [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013ec00000 s84736 r8192 d21760 u524288
Dec 18 19:04:59 linux kernel: [ 0.000000] pcpu-alloc: s84736 r8192 d21760 u524288 alloc=1*2097152
Dec 18 19:04:59 linux kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3
Dec 18 19:04:59 linux kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 883534
Dec 18 19:04:59 linux kernel: [ 0.000000] Policy zone: Normal
Dec 18 19:04:59 linux kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.0-030700-generic root=/dev/mapper/linux-OS ro recovery nomodeset
Dec 18 19:04:59 linux kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Dec 18 19:04:59 linux kernel: [ 0.000000] __ex_table already sorted, skipping sort
Dec 18 19:04:59 linux kernel: [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
Dec 18 19:04:59 linux kernel: [ 0.000000] Checking aperture...
Dec 18 19:04:59 linux kernel: [ 0.000000] No AGP bridge found
Dec 18 19:04:59 linux kernel: [ 0.000000] Node 0: aperture @ 0 size 32 MB
Dec 18 19:04:59 linux kernel: [ 0.000000] Your BIOS doesn't leave a aperture memory hole
Dec 18 19:04:59 linux kernel: [ 0.000000] Please enable the IOMMU option in the BIOS setup
Dec 18 19:04:59 linux kernel: [ 0.000000] This costs you 64 MB of RAM
Dec 18 19:04:59 linux kernel: [ 0.000000] Mapping aperture over 65536 KB of RAM @ 94000000
Dec 18 19:04:59 linux kernel: [ 0.000000] PM: Registered nosave memory: 0000000094000000 - 0000000098000000
Dec 18 19:04:59 linux kernel: [ 0.000000] Memory: 3392160k/5226496k available (7007k kernel code, 1610672k absent, 223664k reserved, 6203k data, 992k init)
Dec 18 19:04:59 linux kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Dec 18 19:04:59 linux kernel: [ 0.000000] Hierarchical RCU implementation.
Dec 18 19:04:59 linux kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
Dec 18 19:04:59 linux kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Dec 18 19:04:59 linux kernel: [ 0.000000] NR_IRQS:16640 nr_irqs:712 16
Dec 18 19:04:59 linux kernel: [ 0.000000] Extended CMOS year: 2000
Dec 18 19:04:59 linux kernel: [ 0.000000] spurious 8259A interrupt: IRQ7.
Dec 18 19:04:59 linux kernel: [ 0.000000] Console: colour VGA+ 80x25
Dec 18 19:04:59 linux kernel: [ 0.000000] console [tty0] enabled
Dec 18 19:04:59 linux kernel: [ 0.000000] allocated 14680064 bytes of page_cgroup
Dec 18 19:04:59 linux kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Dec 18 19:04:59 linux kernel: [ 0.000000] hpet clockevent registered
Dec 18 19:04:59 linux kernel: [ 0.000000] tsc: Fast TSC calibration using PIT
Dec 18 19:04:59 linux kernel: [ 0.004000] tsc: Detected 3393.825 MHz processor
Dec 18 19:04:59 linux kernel: [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.65 BogoMIPS (lpj=13575300)
Dec 18 19:04:59 linux kernel: [ 0.000066] pid_max: default: 32768 minimum: 301
Dec 18 19:04:59 linux kernel: [ 0.000118] Security Framework initialized
Dec 18 19:04:59 linux kernel: [ 0.000158] AppArmor: AppArmor initialized
Dec 18 19:04:59 linux kernel: [ 0.000189] Yama: becoming mindful.
Dec 18 19:04:59 linux kernel: [ 0.000498] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Dec 18 19:04:59 linux kernel: [ 0.001633] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Dec 18 19:04:59 linux kernel: [ 0.002168] Mount-cache hash table entries: 256
Dec 18 19:04:59 linux kernel: [ 0.002358] Initializing cgroup subsys cpuacct
Dec 18 19:04:59 linux kernel: [ 0.002392] Initializing cgroup subsys memory
Dec 18 19:04:59 linux kernel: [ 0.002429] Initializing cgroup subsys devices
Dec 18 19:04:59 linux kernel: [ 0.002460] Initializing cgroup subsys freezer
Dec 18 19:04:59 linux kernel: [ 0.002492] Initializing cgroup subsys blkio
Dec 18 19:04:59 linux kernel: [ 0.002523] Initializing cgroup subsys perf_event
Dec 18 19:04:59 linux kernel: [ 0.002556] Initializing cgroup subsys hugetlb
Dec 18 19:04:59 linux kernel: [ 0.002609] tseg: 009f800000
Dec 18 19:04:59 linux kernel: [ 0.002610] CPU: Physical Processor ID: 0
Dec 18 19:04:59 linux kernel: [ 0.002641] CPU: Processor Core ID: 0
Dec 18 19:04:59 linux kernel: [ 0.002673] mce: CPU supports 7 MCE banks
Dec 18 19:04:59 linux kernel: [ 0.002714] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Dec 18 19:04:59 linux kernel: [ 0.002714] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Dec 18 19:04:59 linux kernel: [ 0.002714] tlb_flushall_shift: 5
Dec 18 19:04:59 linux kernel: [ 0.002850] Freeing SMP alternatives: 24k freed
Dec 18 19:04:59 linux kernel: [ 0.004311] ACPI: Core revision 20120913
Dec 18 19:04:59 linux kernel: [ 0.006799] ftrace: allocating 28504 entries in 112 pages
Dec 18 19:04:59 linux kernel: [ 0.016426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Dec 18 19:04:59 linux kernel: [ 0.056049] smpboot: CPU0: AMD A4-5300 APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
Dec 18 19:04:59 linux kernel: [ 0.162571] Performance Events:
Dec 18 19:04:59 linux kernel: [ 0.162600] perf: AMD core performance counters detected
Dec 18 19:04:59 linux kernel: [ 0.162661] AMD PMU driver.
Dec 18 19:04:59 linux kernel: [ 0.162692] ... version: 0
Dec 18 19:04:59 linux kernel: [ 0.162723] ... bit width: 48
Dec 18 19:04:59 linux kernel: [ 0.162754] ... generic registers: 6
Dec 18 19:04:59 linux kernel: [ 0.162785] ... value mask: 0000ffffffffffff
Dec 18 19:04:59 linux kernel: [ 0.162816] ... max period: 00007fffffffffff
Dec 18 19:04:59 linux kernel: [ 0.162847] ... fixed-purpose events: 0
Dec 18 19:04:59 linux kernel: [ 0.162878] ... event mask: 000000000000003f
Dec 18 19:04:59 linux kernel: [ 0.163834] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Dec 18 19:04:59 linux kernel: [ 0.165066] smpboot: Booting Node 0, Processors #1
Dec 18 19:04:59 linux kernel: [ 0.178132] Brought up 2 CPUs
Dec 18 19:04:59 linux kernel: [ 0.178198] smpboot: Total of 2 processors activated (13575.30 BogoMIPS)
Dec 18 19:04:59 linux kernel: [ 0.178684] devtmpfs: initialized
Dec 18 19:04:59 linux kernel: [ 0.179687] EVM: security.selinux
Dec 18 19:04:59 linux kernel: [ 0.179718] EVM: security.SMACK64
Dec 18 19:04:59 linux kernel: [ 0.179749] EVM: security.capability
Dec 18 19:04:59 linux kernel: [ 0.179820] PM: Registering ACPI NVS region [mem 0x9d9d2000-0x9dd28fff] (3502080 bytes)
Dec 18 19:04:59 linux kernel: [ 0.179904] PM: Registering ACPI NVS region [mem 0x9e9d4000-0x9ebd9fff] (2121728 bytes)
Dec 18 19:04:59 linux kernel: [ 0.180662] regulator-dummy: no parameters
Dec 18 19:04:59 linux kernel: [ 0.180718] RTC time: 18:04:04, date: 12/18/12
Dec 18 19:04:59 linux kernel: [ 0.180787] NET: Registered protocol family 16
Dec 18 19:04:59 linux kernel: [ 0.180989] ACPI: bus type pci registered
Dec 18 19:04:59 linux kernel: [ 0.181066] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Dec 18 19:04:59 linux kernel: [ 0.181104] PCI: not using MMCONFIG
Dec 18 19:04:59 linux kernel: [ 0.181136] PCI: Using configuration type 1 for base access
Dec 18 19:04:59 linux kernel: [ 0.181167] PCI: Using configuration type 1 for extended access
Dec 18 19:04:59 linux kernel: [ 0.182094] bio: create slab <bio-0> at 0
Dec 18 19:04:59 linux kernel: [ 0.182215] ACPI: Added _OSI(Module Device)
Dec 18 19:04:59 linux kernel: [ 0.182247] ACPI: Added _OSI(Processor Device)
Dec 18 19:04:59 linux kernel: [ 0.182279] ACPI: Added _OSI(3.0 _SCP Extensions)
Dec 18 19:04:59 linux kernel: [ 0.182310] ACPI: Added _OSI(Processor Aggregator Device)
Dec 18 19:04:59 linux kernel: [ 0.183315] ACPI: EC: Look up EC in DSDT
Dec 18 19:04:59 linux kernel: [ 0.184511] ACPI: Executed 1 blocks of module-level executable AML code
Dec 18 19:04:59 linux kernel: [ 0.187470] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Dec 18 19:04:59 linux kernel: [ 0.187908] ACPI: Interpreter enabled
Dec 18 19:04:59 linux kernel: [ 0.187941] ACPI: (supports S0 S3 S4 S5)
Dec 18 19:04:59 linux kernel: [ 0.188096] ACPI: Using IOAPIC for interrupt routing
Dec 18 19:04:59 linux kernel: [ 0.188264] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Dec 18 19:04:59 linux kernel: [ 0.188336] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Dec 18 19:04:59 linux kernel: [ 0.211477] ACPI: No dock devices found.
Dec 18 19:04:59 linux kernel: [ 0.211515] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Dec 18 19:04:59 linux kernel: [ 0.211844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Dec 18 19:04:59 linux kernel: [ 0.212157] PCI host bridge to bus 0000:00
Dec 18 19:04:59 linux kernel: [ 0.212190] pci_bus 0000:00: root bus resource [bus 00-ff]
Dec 18 19:04:59 linux kernel: [ 0.212222] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
Dec 18 19:04:59 linux kernel: [ 0.212255] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
Dec 18 19:04:59 linux kernel: [ 0.212288] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
Dec 18 19:04:59 linux kernel: [ 0.212320] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Dec 18 19:04:59 linux kernel: [ 0.212353] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Dec 18 19:04:59 linux kernel: [ 0.212385] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
Dec 18 19:04:59 linux kernel: [ 0.212418] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
Dec 18 19:04:59 linux kernel: [ 0.212457] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
Dec 18 19:04:59 linux kernel: [ 0.212492] pci 0000:00:01.0: [1002:9993] type 00 class 0x030000
Dec 18 19:04:59 linux kernel: [ 0.212500] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
Dec 18 19:04:59 linux kernel: [ 0.212505] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
Dec 18 19:04:59 linux kernel: [ 0.212510] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
Dec 18 19:04:59 linux kernel: [ 0.212543] pci 0000:00:01.0: supports D1 D2
Dec 18 19:04:59 linux kernel: [ 0.212556] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
Dec 18 19:04:59 linux kernel: [ 0.212562] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff]
Dec 18 19:04:59 linux kernel: [ 0.212601] pci 0000:00:01.1: supports D1 D2
Dec 18 19:04:59 linux kernel: [ 0.212619] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
Dec 18 19:04:59 linux kernel: [ 0.212657] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
Dec 18 19:04:59 linux kernel: [ 0.212673] pci 0000:00:06.0: [1022:1416] type 01 class 0x060400
Dec 18 19:04:59 linux kernel: [ 0.212711] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
Dec 18 19:04:59 linux kernel: [ 0.212749] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
Dec 18 19:04:59 linux kernel: [ 0.212767] pci 0000:00:10.0: reg 10: [mem 0xfeb46000-0xfeb47fff 64bit]
Dec 18 19:04:59 linux kernel: [ 0.212856] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
Dec 18 19:04:59 linux kernel: [ 0.212892] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
Dec 18 19:04:59 linux kernel: [ 0.212910] pci 0000:00:10.1: reg 10: [mem 0xfeb44000-0xfeb45fff 64bit]
Dec 18 19:04:59 linux kernel: [ 0.212999] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
Dec 18 19:04:59 linux kernel: [ 0.213032] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
Dec 18 19:04:59 linux kernel: [ 0.213048] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
Dec 18 19:04:59 linux kernel: [ 0.213056] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
Dec 18 19:04:59 linux kernel: [ 0.213063] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
Dec 18 19:04:59 linux kernel: [ 0.213071] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
Dec 18 19:04:59 linux kernel: [ 0.213079] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
Dec 18 19:04:59 linux kernel: [ 0.213087] pci 0000:00:11.0: reg 24: [mem 0xfeb4d000-0xfeb4d7ff]
Dec 18 19:04:59 linux kernel: [ 0.213135] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
Dec 18 19:04:59 linux kernel: [ 0.213146] pci 0000:00:12.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
Dec 18 19:04:59 linux kernel: [ 0.213205] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
Dec 18 19:04:59 linux kernel: [ 0.213221] pci 0000:00:12.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
Dec 18 19:04:59 linux kernel: [ 0.213288] pci 0000:00:12.2: supports D1 D2
Dec 18 19:04:59 linux kernel: [ 0.213290] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Dec 18 19:04:59 linux kernel: [ 0.213309] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
Dec 18 19:04:59 linux kernel: [ 0.213320] pci 0000:00:13.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
Dec 18 19:04:59 linux kernel: [ 0.213379] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
Dec 18 19:04:59 linux kernel: [ 0.213394] pci 0000:00:13.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
Dec 18 19:04:59 linux kernel: [ 0.213462] pci 0000:00:13.2: supports D1 D2
Dec 18 19:04:59 linux kernel: [ 0.213463] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Dec 18 19:04:59 linux kernel: [ 0.213483] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
Dec 18 19:04:59 linux kernel: [ 0.213546] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
Dec 18 19:04:59 linux kernel: [ 0.213608] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
Dec 18 19:04:59 linux kernel: [ 0.213643] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
Dec 18 19:04:59 linux kernel: [ 0.213654] pci 0000:00:14.5: reg 10: [mem 0xfeb48000-0xfeb48fff]
Dec 18 19:04:59 linux kernel: [ 0.213710] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
Dec 18 19:04:59 linux kernel: [ 0.213727] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
Dec 18 19:04:59 linux kernel: [ 0.213742] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
Dec 18 19:04:59 linux kernel: [ 0.213757] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
Dec 18 19:04:59 linux kernel: [ 0.213777] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
Dec 18 19:04:59 linux kernel: [ 0.213793] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
Dec 18 19:04:59 linux kernel: [ 0.213852] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
Dec 18 19:04:59 linux kernel: [ 0.213864] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
Dec 18 19:04:59 linux kernel: [ 0.213884] pci 0000:01:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
Dec 18 19:04:59 linux kernel: [ 0.213897] pci 0000:01:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
Dec 18 19:04:59 linux kernel: [ 0.213951] pci 0000:01:00.0: supports D1 D2
Dec 18 19:04:59 linux kernel: [ 0.213952] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Dec 18 19:04:59 linux kernel: [ 0.222101] pci 0000:00:04.0: PCI bridge to [bus 01]
Dec 18 19:04:59 linux kernel: [ 0.222141] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
Dec 18 19:04:59 linux kernel: [ 0.222146] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
Dec 18 19:04:59 linux kernel: [ 0.222191] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601
Dec 18 19:04:59 linux kernel: [ 0.222260] pci 0000:02:00.0: reg 24: [mem 0xfea10000-0xfea11fff]
Dec 18 19:04:59 linux kernel: [ 0.222271] pci 0000:02:00.0: reg 30: [mem 0xfea00000-0xfea0ffff pref]
Dec 18 19:04:59 linux kernel: [ 0.222313] pci 0000:02:00.0: PME# supported from D3hot
Dec 18 19:04:59 linux kernel: [ 0.222340] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
Dec 18 19:04:59 linux kernel: [ 0.222358] pci 0000:02:00.1: reg 10: [io 0xd040-0xd047]
Dec 18 19:04:59 linux kernel: [ 0.222369] pci 0000:02:00.1: reg 14: [io 0xd030-0xd033]
Dec 18 19:04:59 linux kernel: [ 0.222379] pci 0000:02:00.1: reg 18: [io 0xd020-0xd027]
Dec 18 19:04:59 linux kernel: [ 0.222389] pci 0000:02:00.1: reg 1c: [io 0xd010-0xd013]
Dec 18 19:04:59 linux kernel: [ 0.222399] pci 0000:02:00.1: reg 20: [io 0xd000-0xd00f]
Dec 18 19:04:59 linux kernel: [ 0.222465] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Dec 18 19:04:59 linux kernel: [ 0.222508] pci 0000:00:06.0: PCI bridge to [bus 02]
Dec 18 19:04:59 linux kernel: [ 0.222542] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
Dec 18 19:04:59 linux kernel: [ 0.222545] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
Dec 18 19:04:59 linux kernel: [ 0.222600] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
Dec 18 19:04:59 linux kernel: [ 0.222638] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
Dec 18 19:04:59 linux kernel: [ 0.222640] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
Dec 18 19:04:59 linux kernel: [ 0.222641] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
Dec 18 19:04:59 linux kernel: [ 0.222643] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
Dec 18 19:04:59 linux kernel: [ 0.222645] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Dec 18 19:04:59 linux kernel: [ 0.222646] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
Dec 18 19:04:59 linux kernel: [ 0.222648] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
Dec 18 19:04:59 linux kernel: [ 0.222662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 18 19:04:59 linux kernel: [ 0.222873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
Dec 18 19:04:59 linux kernel: [ 0.222964] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
Dec 18 19:04:59 linux kernel: [ 0.222999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR16._PRT]
Dec 18 19:04:59 linux kernel: [ 0.223130] pci0000:00: Requesting ACPI _OSC control (0x1d)
Dec 18 19:04:59 linux kernel: [ 0.223336] pci0000:00: ACPI _OSC control (0x1d) granted
Dec 18 19:04:59 linux kernel: [ 0.228624] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 19:04:59 linux kernel: [ 0.228984] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 19:04:59 linux kernel: [ 0.229347] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 19:04:59 linux kernel: [ 0.229707] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 19:04:59 linux kernel: [ 0.230058] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 19:04:59 linux kernel: [ 0.230394] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 19:04:59 linux kernel: [ 0.230729] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 19:04:59 linux kernel: [ 0.231061] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
Dec 18 19:04:59 linux kernel: [ 0.231466] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
Dec 18 19:04:59 linux kernel: [ 0.231505] vgaarb: loaded
Dec 18 19:04:59 linux kernel: [ 0.231536] vgaarb: bridge control possible 0000:00:01.0
Dec 18 19:04:59 linux kernel: [ 0.231723] SCSI subsystem initialized
Dec 18 19:04:59 linux kernel: [ 0.231755] ACPI: bus type scsi registered
Dec 18 19:04:59 linux kernel: [ 0.231829] libata version 3.00 loaded.
Dec 18 19:04:59 linux kernel: [ 0.231845] ACPI: bus type usb registered
Dec 18 19:04:59 linux kernel: [ 0.231892] usbcore: registered new interface driver usbfs
Dec 18 19:04:59 linux kernel: [ 0.231930] usbcore: registered new interface driver hub
Dec 18 19:04:59 linux kernel: [ 0.231984] usbcore: registered new device driver usb
Dec 18 19:04:59 linux kernel: [ 0.232081] PCI: Using ACPI for IRQ routing
Dec 18 19:04:59 linux kernel: [ 0.239044] PCI: pci_cache_line_size set to 64 bytes
Dec 18 19:04:59 linux kernel: [ 0.239105] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
Dec 18 19:04:59 linux kernel: [ 0.239106] e820: reserve RAM buffer [mem 0x9d6f1000-0x9fffffff]
Dec 18 19:04:59 linux kernel: [ 0.239108] e820: reserve RAM buffer [mem 0x9e9d4000-0x9fffffff]
Dec 18 19:04:59 linux kernel: [ 0.239109] e820: reserve RAM buffer [mem 0x9f04c000-0x9fffffff]
Dec 18 19:04:59 linux kernel: [ 0.239110] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
Dec 18 19:04:59 linux kernel: [ 0.239112] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
Dec 18 19:04:59 linux kernel: [ 0.239196] NetLabel: Initializing
Dec 18 19:04:59 linux kernel: [ 0.239228] NetLabel: domain hash size = 128
Dec 18 19:04:59 linux kernel: [ 0.239258] NetLabel: protocols = UNLABELED CIPSOv4
Dec 18 19:04:59 linux kernel: [ 0.239300] NetLabel: unlabeled traffic allowed by default
Dec 18 19:04:59 linux kernel: [ 0.239383] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Dec 18 19:04:59 linux kernel: [ 0.239523] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Dec 18 19:04:59 linux kernel: [ 0.241572] Switching to clocksource hpet
Dec 18 19:04:59 linux kernel: [ 0.247058] AppArmor: AppArmor Filesystem Enabled
Dec 18 19:04:59 linux kernel: [ 0.247118] pnp: PnP ACPI init
Dec 18 19:04:59 linux kernel: [ 0.247160] ACPI: bus type pnp registered
Dec 18 19:04:59 linux kernel: [ 0.247377] pnp 00:00: [bus 00-ff]
Dec 18 19:04:59 linux kernel: [ 0.247379] pnp 00:00: [io 0x0cf8-0x0cff]
Dec 18 19:04:59 linux kernel: [ 0.247381] pnp 00:00: [io 0x0000-0x03af window]
Dec 18 19:04:59 linux kernel: [ 0.247383] pnp 00:00: [io 0x03e0-0x0cf7 window]
Dec 18 19:04:59 linux kernel: [ 0.247384] pnp 00:00: [io 0x03b0-0x03df window]
Dec 18 19:04:59 linux kernel: [ 0.247386] pnp 00:00: [io 0x0d00-0xffff window]
Dec 18 19:04:59 linux kernel: [ 0.247387] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Dec 18 19:04:59 linux kernel: [ 0.247389] pnp 00:00: [mem 0x000c0000-0x000dffff window]
Dec 18 19:04:59 linux kernel: [ 0.247391] pnp 00:00: [mem 0xc0000000-0xffffffff window]
Dec 18 19:04:59 linux kernel: [ 0.247392] pnp 00:00: [mem 0x00000000 window]
Dec 18 19:04:59 linux kernel: [ 0.247420] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Dec 18 19:04:59 linux kernel: [ 0.247454] pnp 00:01: [mem 0xe0000000-0xefffffff]
Dec 18 19:04:59 linux kernel: [ 0.247486] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.247519] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
Dec 18 19:04:59 linux kernel: [ 0.247998] pnp 00:02: [io 0x0010-0x001f]
Dec 18 19:04:59 linux kernel: [ 0.248000] pnp 00:02: [io 0x0022-0x003f]
Dec 18 19:04:59 linux kernel: [ 0.248001] pnp 00:02: [io 0x0063]
Dec 18 19:04:59 linux kernel: [ 0.248005] pnp 00:02: [io 0x0065]
Dec 18 19:04:59 linux kernel: [ 0.248006] pnp 00:02: [io 0x0067-0x006f]
Dec 18 19:04:59 linux kernel: [ 0.248008] pnp 00:02: [io 0x0072-0x007f]
Dec 18 19:04:59 linux kernel: [ 0.248009] pnp 00:02: [io 0x0080]
Dec 18 19:04:59 linux kernel: [ 0.248010] pnp 00:02: [io 0x0084-0x0086]
Dec 18 19:04:59 linux kernel: [ 0.248011] pnp 00:02: [io 0x0088]
Dec 18 19:04:59 linux kernel: [ 0.248013] pnp 00:02: [io 0x008c-0x008e]
Dec 18 19:04:59 linux kernel: [ 0.248014] pnp 00:02: [io 0x0090-0x009f]
Dec 18 19:04:59 linux kernel: [ 0.248015] pnp 00:02: [io 0x00a2-0x00bf]
Dec 18 19:04:59 linux kernel: [ 0.248016] pnp 00:02: [io 0x00b1]
Dec 18 19:04:59 linux kernel: [ 0.248018] pnp 00:02: [io 0x00e0-0x00ef]
Dec 18 19:04:59 linux kernel: [ 0.248019] pnp 00:02: [io 0x04d0-0x04d1]
Dec 18 19:04:59 linux kernel: [ 0.248020] pnp 00:02: [io 0x040b]
Dec 18 19:04:59 linux kernel: [ 0.248021] pnp 00:02: [io 0x04d6]
Dec 18 19:04:59 linux kernel: [ 0.248023] pnp 00:02: [io 0x0c00-0x0c01]
Dec 18 19:04:59 linux kernel: [ 0.248024] pnp 00:02: [io 0x0c14]
Dec 18 19:04:59 linux kernel: [ 0.248025] pnp 00:02: [io 0x0c50-0x0c51]
Dec 18 19:04:59 linux kernel: [ 0.248027] pnp 00:02: [io 0x0c52]
Dec 18 19:04:59 linux kernel: [ 0.248028] pnp 00:02: [io 0x0c6c]
Dec 18 19:04:59 linux kernel: [ 0.248029] pnp 00:02: [io 0x0c6f]
Dec 18 19:04:59 linux kernel: [ 0.248030] pnp 00:02: [io 0x0cd0-0x0cd1]
Dec 18 19:04:59 linux kernel: [ 0.248032] pnp 00:02: [io 0x0cd2-0x0cd3]
Dec 18 19:04:59 linux kernel: [ 0.248033] pnp 00:02: [io 0x0cd4-0x0cd5]
Dec 18 19:04:59 linux kernel: [ 0.248034] pnp 00:02: [io 0x0cd6-0x0cd7]
Dec 18 19:04:59 linux kernel: [ 0.248035] pnp 00:02: [io 0x0cd8-0x0cdf]
Dec 18 19:04:59 linux kernel: [ 0.248037] pnp 00:02: [io 0x0800-0x089f]
Dec 18 19:04:59 linux kernel: [ 0.248038] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
Dec 18 19:04:59 linux kernel: [ 0.248040] pnp 00:02: [io 0x0000-0x000f]
Dec 18 19:04:59 linux kernel: [ 0.248041] pnp 00:02: [io 0x0b20-0x0b3f]
Dec 18 19:04:59 linux kernel: [ 0.248042] pnp 00:02: [io 0x0900-0x090f]
Dec 18 19:04:59 linux kernel: [ 0.248044] pnp 00:02: [io 0x0910-0x091f]
Dec 18 19:04:59 linux kernel: [ 0.248045] pnp 00:02: [io 0xfe00-0xfefe]
Dec 18 19:04:59 linux kernel: [ 0.248046] pnp 00:02: [io 0x0060-0x005f disabled]
Dec 18 19:04:59 linux kernel: [ 0.248048] pnp 00:02: [io 0x0064-0x0063 disabled]
Dec 18 19:04:59 linux kernel: [ 0.248049] pnp 00:02: [mem 0xfec00000-0xfec00fff]
Dec 18 19:04:59 linux kernel: [ 0.248051] pnp 00:02: [mem 0xfee00000-0xfee00fff]
Dec 18 19:04:59 linux kernel: [ 0.248052] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
Dec 18 19:04:59 linux kernel: [ 0.248054] pnp 00:02: [mem 0xfed61000-0xfed70fff]
Dec 18 19:04:59 linux kernel: [ 0.248055] pnp 00:02: [mem 0xfec10000-0xfec10fff]
Dec 18 19:04:59 linux kernel: [ 0.248056] pnp 00:02: [mem 0xfed00000-0xfed00fff]
Dec 18 19:04:59 linux kernel: [ 0.248058] pnp 00:02: [mem 0xff000000-0xffffffff]
Dec 18 19:04:59 linux kernel: [ 0.248117] system 00:02: [io 0x04d0-0x04d1] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248150] system 00:02: [io 0x040b] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248182] system 00:02: [io 0x04d6] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248214] system 00:02: [io 0x0c00-0x0c01] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248246] system 00:02: [io 0x0c14] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248278] system 00:02: [io 0x0c50-0x0c51] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248311] system 00:02: [io 0x0c52] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248343] system 00:02: [io 0x0c6c] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248375] system 00:02: [io 0x0c6f] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248407] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248440] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248473] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248505] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248537] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248569] system 00:02: [io 0x0800-0x089f] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248602] system 00:02: [io 0x0b20-0x0b3f] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248634] system 00:02: [io 0x0900-0x090f] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248667] system 00:02: [io 0x0910-0x091f] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248699] system 00:02: [io 0xfe00-0xfefe] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248733] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
Dec 18 19:04:59 linux kernel: [ 0.248766] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248798] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248831] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248863] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248896] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248929] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.248962] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 19:04:59 linux kernel: [ 0.249099] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
Dec 18 19:04:59 linux kernel: [ 0.249101] pnp 00:03: [io 0x0220-0x0227]
Dec 18 19:04:59 linux kernel: [ 0.249102] pnp 00:03: [io 0x0228-0x0237]
Dec 18 19:04:59 linux kernel: [ 0.249103] pnp 00:03: [io 0x0a20-0x0a2f]
Dec 18 19:04:59 linux kernel: [ 0.249128] system 00:03: [io 0x0220-0x0227] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.249161] system 00:03: [io 0x0228-0x0237] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.249193] system 00:03: [io 0x0a20-0x0a2f] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.249226] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 19:04:59 linux kernel: [ 0.249247] pnp 00:04: [io 0x0060]
Dec 18 19:04:59 linux kernel: [ 0.249249] pnp 00:04: [io 0x0064]
Dec 18 19:04:59 linux kernel: [ 0.249257] pnp 00:04: [irq 1]
Dec 18 19:04:59 linux kernel: [ 0.249276] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Dec 18 19:04:59 linux kernel: [ 0.249452] pnp 00:05: [dma 4]
Dec 18 19:04:59 linux kernel: [ 0.249454] pnp 00:05: [io 0x0000-0x000f]
Dec 18 19:04:59 linux kernel: [ 0.249455] pnp 00:05: [io 0x0081-0x0083]
Dec 18 19:04:59 linux kernel: [ 0.249456] pnp 00:05: [io 0x0087]
Dec 18 19:04:59 linux kernel: [ 0.249458] pnp 00:05: [io 0x0089-0x008b]
Dec 18 19:04:59 linux kernel: [ 0.249459] pnp 00:05: [io 0x008f]
Dec 18 19:04:59 linux kernel: [ 0.249460] pnp 00:05: [io 0x00c0-0x00df]
Dec 18 19:04:59 linux kernel: [ 0.249476] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
Dec 18 19:04:59 linux kernel: [ 0.249485] pnp 00:06: [io 0x0070-0x0071]
Dec 18 19:04:59 linux kernel: [ 0.249489] pnp 00:06: [irq 8]
Dec 18 19:04:59 linux kernel: [ 0.249504] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
Dec 18 19:04:59 linux kernel: [ 0.249511] pnp 00:07: [io 0x0061]
Dec 18 19:04:59 linux kernel: [ 0.249526] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
Dec 18 19:04:59 linux kernel: [ 0.249549] pnp 00:08: [io 0x0010-0x001f]
Dec 18 19:04:59 linux kernel: [ 0.249550] pnp 00:08: [io 0x0022-0x003f]
Dec 18 19:04:59 linux kernel: [ 0.249552] pnp 00:08: [io 0x0044-0x005f]
Dec 18 19:04:59 linux kernel: [ 0.249553] pnp 00:08: [io 0x0072-0x007f]
Dec 18 19:04:59 linux kernel: [ 0.249554] pnp 00:08: [io 0x0080]
Dec 18 19:04:59 linux kernel: [ 0.249556] pnp 00:08: [io 0x0084-0x0086]
Dec 18 19:04:59 linux kernel: [ 0.249557] pnp 00:08: [io 0x0088]
Dec 18 19:04:59 linux kernel: [ 0.249558] pnp 00:08: [io 0x008c-0x008e]
Dec 18 19:04:59 linux kernel: [ 0.249559] pnp 00:08: [io 0x0090-0x009f]
Dec 18 19:04:59 linux kernel: [ 0.249561] pnp 00:08: [io 0x00a2-0x00bf]
Dec 18 19:04:59 linux kernel: [ 0.249562] pnp 00:08: [io 0x00e0-0x00ef]
Dec 18 19:04:59 linux kernel: [ 0.249563] pnp 00:08: [io 0x04d0-0x04d1]
Dec 18 19:04:59 linux kernel: [ 0.249605] system 00:08: [io 0x04d0-0x04d1] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.249639] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 19:04:59 linux kernel: [ 0.249646] pnp 00:09: [io 0x00f0-0x00ff]
Dec 18 19:04:59 linux kernel: [ 0.249650] pnp 00:09: [irq 13]
Dec 18 19:04:59 linux kernel: [ 0.249665] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
Dec 18 19:04:59 linux kernel: [ 0.249698] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 19:04:59 linux kernel: [ 0.249817] pnp 00:0b: [mem 0xa0000000-0xbfffffff]
Dec 18 19:04:59 linux kernel: [ 0.249841] system 00:0b: [mem 0xa0000000-0xbfffffff] has been reserved
Dec 18 19:04:59 linux kernel: [ 0.249874] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 19:04:59 linux kernel: [ 0.249919] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
Dec 18 19:04:59 linux kernel: [ 0.249944] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 18 19:04:59 linux kernel: [ 0.250081] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
Dec 18 19:04:59 linux kernel: [ 0.250099] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
Dec 18 19:04:59 linux kernel: [ 0.250102] pnp: PnP ACPI: found 14 devices
Dec 18 19:04:59 linux kernel: [ 0.250133] ACPI: ACPI bus type pnp unregistered
Dec 18 19:04:59 linux kernel: [ 0.256533] pci 0000:00:04.0: PCI bridge to [bus 01]
Dec 18 19:04:59 linux kernel: [ 0.256568] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
Dec 18 19:04:59 linux kernel: [ 0.256602] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
Dec 18 19:04:59 linux kernel: [ 0.256640] pci 0000:00:06.0: PCI bridge to [bus 02]
Dec 18 19:04:59 linux kernel: [ 0.256672] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
Dec 18 19:04:59 linux kernel: [ 0.256705] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
Dec 18 19:04:59 linux kernel: [ 0.256741] pci 0000:00:14.4: PCI bridge to [bus 03]
Dec 18 19:04:59 linux kernel: [ 0.256803] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
Dec 18 19:04:59 linux kernel: [ 0.256804] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
Dec 18 19:04:59 linux kernel: [ 0.256806] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
Dec 18 19:04:59 linux kernel: [ 0.256808] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
Dec 18 19:04:59 linux kernel: [ 0.256809] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
Dec 18 19:04:59 linux kernel: [ 0.256811] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
Dec 18 19:04:59 linux kernel: [ 0.256813] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
Dec 18 19:04:59 linux kernel: [ 0.256814] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
Dec 18 19:04:59 linux kernel: [ 0.256816] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
Dec 18 19:04:59 linux kernel: [ 0.256818] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
Dec 18 19:04:59 linux kernel: [ 0.256819] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
Dec 18 19:04:59 linux kernel: [ 0.256821] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
Dec 18 19:04:59 linux kernel: [ 0.256823] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
Dec 18 19:04:59 linux kernel: [ 0.256824] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
Dec 18 19:04:59 linux kernel: [ 0.256826] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
Dec 18 19:04:59 linux kernel: [ 0.256827] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
Dec 18 19:04:59 linux kernel: [ 0.256829] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
Dec 18 19:04:59 linux kernel: [ 0.256830] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
Dec 18 19:04:59 linux kernel: [ 0.256856] NET: Registered protocol family 2
Dec 18 19:04:59 linux kernel: [ 0.257529] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Dec 18 19:04:59 linux kernel: [ 0.259485] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Dec 18 19:04:59 linux kernel: [ 0.259739] TCP: Hash tables configured (established 524288 bind 65536)
Dec 18 19:04:59 linux kernel: [ 0.259808] TCP: reno registered
Dec 18 19:04:59 linux kernel: [ 0.259848] UDP hash table entries: 2048 (order: 4, 65536 bytes)
Dec 18 19:04:59 linux kernel: [ 0.259901] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Dec 18 19:04:59 linux kernel: [ 0.260003] NET: Registered protocol family 1
Dec 18 19:04:59 linux kernel: [ 0.260047] pci 0000:00:01.0: Boot video device
Dec 18 19:04:59 linux kernel: [ 0.509080] PCI: CLS 64 bytes, default 64
Dec 18 19:04:59 linux kernel: [ 0.509127] Trying to unpack rootfs image as initramfs...
Dec 18 19:04:59 linux kernel: [ 0.773950] Freeing initrd memory: 18332k freed
Dec 18 19:04:59 linux kernel: [ 0.778157] PCI-DMA: Disabling AGP.
Dec 18 19:04:59 linux kernel: [ 0.778191] PCI-DMA: More than 4GB of RAM and no IOMMU
Dec 18 19:04:59 linux kernel: [ 0.778191] falling back to iommu=soft.
Dec 18 19:04:59 linux kernel: [ 0.778227] More than 4GB of memory but GART IOMMU not available.
Dec 18 19:04:59 linux kernel: [ 0.778258] falling back to iommu=soft.
Dec 18 19:04:59 linux kernel: [ 0.778289] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Dec 18 19:04:59 linux kernel: [ 0.778322] software IO TLB [mem 0x996f1000-0x9d6f0fff] (64MB) mapped at [ffff8800996f1000-ffff88009d6f0fff]
Dec 18 19:04:59 linux kernel: [ 0.778448] LVT offset 0 assigned for vector 0x400
Dec 18 19:04:59 linux kernel: [ 0.778501] perf: AMD IBS detected (0x000000ff)
Dec 18 19:04:59 linux kernel: [ 0.778734] Initialise module verification
Dec 18 19:04:59 linux kernel: [ 0.778799] audit: initializing netlink socket (disabled)
Dec 18 19:04:59 linux kernel: [ 0.778839] type=2000 audit(1355853844.672:1): initialized
Dec 18 19:04:59 linux kernel: [ 0.801375] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Dec 18 19:04:59 linux kernel: [ 0.802743] VFS: Disk quotas dquot_6.5.2
Dec 18 19:04:59 linux kernel: [ 0.802807] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Dec 18 19:04:59 linux kernel: [ 0.803259] fuse init (API version 7.20)
Dec 18 19:04:59 linux kernel: [ 0.803356] msgmni has been set to 6661
Dec 18 19:04:59 linux kernel: [ 0.803733] Key type asymmetric registered
Dec 18 19:04:59 linux kernel: [ 0.803766] Asymmetric key parser 'x509' registered
Dec 18 19:04:59 linux kernel: [ 0.803823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Dec 18 19:04:59 linux kernel: [ 0.803882] io scheduler noop registered
Dec 18 19:04:59 linux kernel: [ 0.803915] io scheduler deadline registered (default)
Dec 18 19:04:59 linux kernel: [ 0.803949] io scheduler cfq registered
Dec 18 19:04:59 linux kernel: [ 0.804092] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 0.804161] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 0.804218] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
Dec 18 19:04:59 linux kernel: [ 0.804251] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
Dec 18 19:04:59 linux kernel: [ 0.804295] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
Dec 18 19:04:59 linux kernel: [ 0.804309] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
Dec 18 19:04:59 linux kernel: [ 0.804342] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
Dec 18 19:04:59 linux kernel: [ 0.804377] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
Dec 18 19:04:59 linux kernel: [ 0.804413] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
Dec 18 19:04:59 linux kernel: [ 0.804426] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Dec 18 19:04:59 linux kernel: [ 0.804472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Dec 18 19:04:59 linux kernel: [ 0.804594] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Dec 18 19:04:59 linux kernel: [ 0.804632] ACPI: Power Button [PWRB]
Dec 18 19:04:59 linux kernel: [ 0.804692] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Dec 18 19:04:59 linux kernel: [ 0.804728] ACPI: Power Button [PWRF]
Dec 18 19:04:59 linux kernel: [ 0.804815] ACPI: acpi_idle registered with cpuidle
Dec 18 19:04:59 linux kernel: [ 0.826281] GHES: HEST is not enabled!
Dec 18 19:04:59 linux kernel: [ 0.826410] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Dec 18 19:04:59 linux kernel: [ 0.827617] Linux agpgart interface v0.103
Dec 18 19:04:59 linux kernel: [ 0.828754] brd: module loaded
Dec 18 19:04:59 linux kernel: [ 0.829335] loop: module loaded
Dec 18 19:04:59 linux kernel: [ 0.829458] ahci 0000:00:11.0: version 3.0
Dec 18 19:04:59 linux kernel: [ 0.829519] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 0.829624] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
Dec 18 19:04:59 linux kernel: [ 0.830783] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
Dec 18 19:04:59 linux kernel: [ 0.831624] scsi0 : ahci
Dec 18 19:04:59 linux kernel: [ 0.831719] scsi1 : ahci
Dec 18 19:04:59 linux kernel: [ 0.831810] scsi2 : ahci
Dec 18 19:04:59 linux kernel: [ 0.831891] scsi3 : ahci
Dec 18 19:04:59 linux kernel: [ 0.831971] scsi4 : ahci
Dec 18 19:04:59 linux kernel: [ 0.832053] scsi5 : ahci
Dec 18 19:04:59 linux kernel: [ 0.832135] scsi6 : ahci
Dec 18 19:04:59 linux kernel: [ 0.832224] scsi7 : ahci
Dec 18 19:04:59 linux kernel: [ 0.832293] ata1: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d100 irq 42
Dec 18 19:04:59 linux kernel: [ 0.832328] ata2: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d180 irq 42
Dec 18 19:04:59 linux kernel: [ 0.832364] ata3: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d200 irq 42
Dec 18 19:04:59 linux kernel: [ 0.832400] ata4: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d280 irq 42
Dec 18 19:04:59 linux kernel: [ 0.832436] ata5: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d300 irq 42
Dec 18 19:04:59 linux kernel: [ 0.832471] ata6: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d380 irq 42
Dec 18 19:04:59 linux kernel: [ 0.832506] ata7: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d400 irq 42
Dec 18 19:04:59 linux kernel: [ 0.832542] ata8: SATA max UDMA/133 abar m2048@0xfeb4d000 port 0xfeb4d480 irq 42
Dec 18 19:04:59 linux kernel: [ 0.848259] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Dec 18 19:04:59 linux kernel: [ 0.848300] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Dec 18 19:04:59 linux kernel: [ 0.848604] scsi8 : ahci
Dec 18 19:04:59 linux kernel: [ 0.848703] scsi9 : ahci
Dec 18 19:04:59 linux kernel: [ 0.848766] ata9: SATA max UDMA/133 abar m8192@0xfea10000 port 0xfea10100 irq 18
Dec 18 19:04:59 linux kernel: [ 0.848802] ata10: SATA max UDMA/133 abar m8192@0xfea10000 port 0xfea10180 irq 18
Dec 18 19:04:59 linux kernel: [ 0.848892] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
Dec 18 19:04:59 linux kernel: [ 0.848949] pata_acpi 0000:02:00.1: setting latency timer to 64
Dec 18 19:04:59 linux kernel: [ 0.849157] libphy: Fixed MDIO Bus: probed
Dec 18 19:04:59 linux kernel: [ 0.849225] tun: Universal TUN/TAP device driver, 1.6
Dec 18 19:04:59 linux kernel: [ 0.849257] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Dec 18 19:04:59 linux kernel: [ 0.849345] PPP generic driver version 2.4.2
Dec 18 19:04:59 linux kernel: [ 0.849421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 18 19:04:59 linux kernel: [ 0.849491] ehci_hcd 0000:00:12.2: EHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.849526] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
Dec 18 19:04:59 linux kernel: [ 0.849571] QUIRK: Enable AMD PLL fix
Dec 18 19:04:59 linux kernel: [ 0.849572] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Dec 18 19:04:59 linux kernel: [ 0.849631] ehci_hcd 0000:00:12.2: debug port 1
Dec 18 19:04:59 linux kernel: [ 0.849677] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4b000
Dec 18 19:04:59 linux kernel: [ 0.860201] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
Dec 18 19:04:59 linux kernel: [ 0.860266] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Dec 18 19:04:59 linux kernel: [ 0.860299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 0.860335] usb usb1: Product: EHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.860367] usb usb1: Manufacturer: Linux 3.7.0-030700-generic ehci_hcd
Dec 18 19:04:59 linux kernel: [ 0.860399] usb usb1: SerialNumber: 0000:00:12.2
Dec 18 19:04:59 linux kernel: [ 0.860551] hub 1-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 0.860584] hub 1-0:1.0: 5 ports detected
Dec 18 19:04:59 linux kernel: [ 0.860720] ehci_hcd 0000:00:13.2: EHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.860755] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
Dec 18 19:04:59 linux kernel: [ 0.860792] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Dec 18 19:04:59 linux kernel: [ 0.860850] ehci_hcd 0000:00:13.2: debug port 1
Dec 18 19:04:59 linux kernel: [ 0.860891] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb49000
Dec 18 19:04:59 linux kernel: [ 0.872179] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
Dec 18 19:04:59 linux kernel: [ 0.872245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Dec 18 19:04:59 linux kernel: [ 0.872278] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 0.872314] usb usb2: Product: EHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.872346] usb usb2: Manufacturer: Linux 3.7.0-030700-generic ehci_hcd
Dec 18 19:04:59 linux kernel: [ 0.872378] usb usb2: SerialNumber: 0000:00:13.2
Dec 18 19:04:59 linux kernel: [ 0.872517] hub 2-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 0.872552] hub 2-0:1.0: 5 ports detected
Dec 18 19:04:59 linux kernel: [ 0.872677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 18 19:04:59 linux kernel: [ 0.872747] ohci_hcd 0000:00:12.0: OHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.872782] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
Dec 18 19:04:59 linux kernel: [ 0.872830] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
Dec 18 19:04:59 linux kernel: [ 0.932034] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Dec 18 19:04:59 linux kernel: [ 0.932071] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 0.932107] usb usb3: Product: OHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.932139] usb usb3: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
Dec 18 19:04:59 linux kernel: [ 0.932171] usb usb3: SerialNumber: 0000:00:12.0
Dec 18 19:04:59 linux kernel: [ 0.932323] hub 3-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 0.932358] hub 3-0:1.0: 5 ports detected
Dec 18 19:04:59 linux kernel: [ 0.932488] ohci_hcd 0000:00:13.0: OHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.932523] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
Dec 18 19:04:59 linux kernel: [ 0.932569] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4a000
Dec 18 19:04:59 linux kernel: [ 0.991887] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Dec 18 19:04:59 linux kernel: [ 0.991924] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 0.991961] usb usb4: Product: OHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.991993] usb usb4: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
Dec 18 19:04:59 linux kernel: [ 0.992025] usb usb4: SerialNumber: 0000:00:13.0
Dec 18 19:04:59 linux kernel: [ 0.992173] hub 4-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 0.992210] hub 4-0:1.0: 5 ports detected
Dec 18 19:04:59 linux kernel: [ 0.992337] ohci_hcd 0000:00:14.5: OHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 0.992372] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
Dec 18 19:04:59 linux kernel: [ 0.992420] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb48000
Dec 18 19:04:59 linux kernel: [ 1.051760] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Dec 18 19:04:59 linux kernel: [ 1.051796] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 1.051832] usb usb5: Product: OHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.051864] usb usb5: Manufacturer: Linux 3.7.0-030700-generic ohci_hcd
Dec 18 19:04:59 linux kernel: [ 1.051897] usb usb5: SerialNumber: 0000:00:14.5
Dec 18 19:04:59 linux kernel: [ 1.052044] hub 5-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 1.052080] hub 5-0:1.0: 2 ports detected
Dec 18 19:04:59 linux kernel: [ 1.052171] uhci_hcd: USB Universal Host Controller Interface driver
Dec 18 19:04:59 linux kernel: [ 1.052250] xhci_hcd 0000:00:10.0: xHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.052286] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
Dec 18 19:04:59 linux kernel: [ 1.052503] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb46000
Dec 18 19:04:59 linux kernel: [ 1.052580] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 1.052585] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 1.052589] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 1.052649] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
Dec 18 19:04:59 linux kernel: [ 1.052682] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 1.052717] usb usb6: Product: xHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.052748] usb usb6: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
Dec 18 19:04:59 linux kernel: [ 1.052781] usb usb6: SerialNumber: 0000:00:10.0
Dec 18 19:04:59 linux kernel: [ 1.052864] xHCI xhci_add_endpoint called for root hub
Dec 18 19:04:59 linux kernel: [ 1.052865] xHCI xhci_check_bandwidth called for root hub
Dec 18 19:04:59 linux kernel: [ 1.052882] hub 6-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 1.052916] hub 6-0:1.0: 2 ports detected
Dec 18 19:04:59 linux kernel: [ 1.052995] xhci_hcd 0000:00:10.0: xHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.053029] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
Dec 18 19:04:59 linux kernel: [ 1.055918] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
Dec 18 19:04:59 linux kernel: [ 1.055950] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 1.055986] usb usb7: Product: xHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.056018] usb usb7: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
Dec 18 19:04:59 linux kernel: [ 1.056050] usb usb7: SerialNumber: 0000:00:10.0
Dec 18 19:04:59 linux kernel: [ 1.056131] xHCI xhci_add_endpoint called for root hub
Dec 18 19:04:59 linux kernel: [ 1.056132] xHCI xhci_check_bandwidth called for root hub
Dec 18 19:04:59 linux kernel: [ 1.056150] hub 7-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 1.056185] hub 7-0:1.0: 2 ports detected
Dec 18 19:04:59 linux kernel: [ 1.056300] xhci_hcd 0000:00:10.1: xHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.056335] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
Dec 18 19:04:59 linux kernel: [ 1.056549] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb44000
Dec 18 19:04:59 linux kernel: [ 1.056620] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 1.056625] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 1.056629] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 1.056687] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
Dec 18 19:04:59 linux kernel: [ 1.056720] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 1.056756] usb usb8: Product: xHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.056787] usb usb8: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
Dec 18 19:04:59 linux kernel: [ 1.056819] usb usb8: SerialNumber: 0000:00:10.1
Dec 18 19:04:59 linux kernel: [ 1.056910] xHCI xhci_add_endpoint called for root hub
Dec 18 19:04:59 linux kernel: [ 1.056911] xHCI xhci_check_bandwidth called for root hub
Dec 18 19:04:59 linux kernel: [ 1.056929] hub 8-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 1.056963] hub 8-0:1.0: 2 ports detected
Dec 18 19:04:59 linux kernel: [ 1.057045] xhci_hcd 0000:00:10.1: xHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.057078] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
Dec 18 19:04:59 linux kernel: [ 1.059964] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
Dec 18 19:04:59 linux kernel: [ 1.059997] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 18 19:04:59 linux kernel: [ 1.060032] usb usb9: Product: xHCI Host Controller
Dec 18 19:04:59 linux kernel: [ 1.060064] usb usb9: Manufacturer: Linux 3.7.0-030700-generic xhci_hcd
Dec 18 19:04:59 linux kernel: [ 1.060096] usb usb9: SerialNumber: 0000:00:10.1
Dec 18 19:04:59 linux kernel: [ 1.060190] xHCI xhci_add_endpoint called for root hub
Dec 18 19:04:59 linux kernel: [ 1.060191] xHCI xhci_check_bandwidth called for root hub
Dec 18 19:04:59 linux kernel: [ 1.060209] hub 9-0:1.0: USB hub found
Dec 18 19:04:59 linux kernel: [ 1.060244] hub 9-0:1.0: 2 ports detected
Dec 18 19:04:59 linux kernel: [ 1.063790] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Dec 18 19:04:59 linux kernel: [ 1.063825] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Dec 18 19:04:59 linux kernel: [ 1.063981] serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 18 19:04:59 linux kernel: [ 1.064117] mousedev: PS/2 mouse device common for all mice
Dec 18 19:04:59 linux kernel: [ 1.064254] rtc_cmos 00:06: RTC can wake from S4
Dec 18 19:04:59 linux kernel: [ 1.064373] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Dec 18 19:04:59 linux kernel: [ 1.064424] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Dec 18 19:04:59 linux kernel: [ 1.064529] device-mapper: uevent: version 1.0.3
Dec 18 19:04:59 linux kernel: [ 1.064607] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
Dec 18 19:04:59 linux kernel: [ 1.064670] cpuidle: using governor ladder
Dec 18 19:04:59 linux kernel: [ 1.064735] cpuidle: using governor menu
Dec 18 19:04:59 linux kernel: [ 1.064768] ledtrig-cpu: registered to indicate activity on CPUs
Dec 18 19:04:59 linux kernel: [ 1.064799] EFI Variables Facility v0.08 2004-May-17
Dec 18 19:04:59 linux kernel: [ 1.064991] ashmem: initialized
Dec 18 19:04:59 linux kernel: [ 1.065114] TCP: cubic registered
Dec 18 19:04:59 linux kernel: [ 1.065220] NET: Registered protocol family 10
Dec 18 19:04:59 linux kernel: [ 1.065384] NET: Registered protocol family 17
Dec 18 19:04:59 linux kernel: [ 1.065421] Key type dns_resolver registered
Dec 18 19:04:59 linux kernel: [ 1.065692] PM: Hibernation image not present or could not be loaded.
Dec 18 19:04:59 linux kernel: [ 1.065694] Loading module verification certificates
Dec 18 19:04:59 linux kernel: [ 1.066520] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e3c9ba861fdbed41d7ed913516075eb74194d8e6'
Dec 18 19:04:59 linux kernel: [ 1.067772] registered taskstats version 1
Dec 18 19:04:59 linux kernel: [ 1.069487] Key type trusted registered
Dec 18 19:04:59 linux kernel: [ 1.070897] Key type encrypted registered
Dec 18 19:04:59 linux kernel: [ 1.072618] Magic number: 8:811:89
Dec 18 19:04:59 linux kernel: [ 1.072734] rtc_cmos 00:06: setting system clock to 2012-12-18 18:04:05 UTC (1355853845)
Dec 18 19:04:59 linux kernel: [ 1.072813] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
Dec 18 19:04:59 linux kernel: [ 1.073637] acpi-cpufreq: overriding BIOS provided _PSD data
Dec 18 19:04:59 linux kernel: [ 1.073764] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Dec 18 19:04:59 linux kernel: [ 1.073796] EDD information not available.
Dec 18 19:04:59 linux kernel: [ 1.082807] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Dec 18 19:04:59 linux kernel: [ 1.323105] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.323159] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.323206] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.323252] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.323298] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.323345] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.323390] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.323438] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.323808] ata4.00: ATA-8: ST3000DM001-9YN166, CC4B, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.323841] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.323974] ata4.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.324642] ata4.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.324645] ata4.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.329552] ata5.00: HPA detected: current 3907027055, native 3907029168
Dec 18 19:04:59 linux kernel: [ 1.329602] ata6.00: HPA detected: current 3907027055, native 3907029168
Dec 18 19:04:59 linux kernel: [ 1.329644] ata7.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.329681] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.329721] ata2.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.329756] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.329794] ata5.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.329828] ata5.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.329867] ata3.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.329901] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.329939] ata6.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.329973] ata6.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.330031] ata7.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.330070] ata8.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.330109] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.330147] ata1.00: HPA detected: current 976771055, native 976773168
Dec 18 19:04:59 linux kernel: [ 1.331234] ata2.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.331442] ata5.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.331509] ata3.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.331585] ata6.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.331718] ata8.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.331832] ata1.00: ATA-8: SAMSUNG HM500LI, 2TF00_00, max UDMA7
Dec 18 19:04:59 linux kernel: [ 1.331867] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.336534] ata7.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.336541] ata7.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.337786] ata1.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.338956] ata2.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.338963] ata2.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.339025] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.339075] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 18 19:04:59 linux kernel: [ 1.339236] ata5.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.339239] ata5.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.339293] ata3.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.339296] ata3.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.339355] ata6.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.339357] ata6.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.339447] ata8.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.339450] ata8.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.345009] ata9.00: HPA detected: current 3907027055, native 3907029168
Dec 18 19:04:59 linux kernel: [ 1.345066] ata10.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.345102] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.345146] ata9.00: ATA-8: SAMSUNG HD203WI, 1AN10003, max UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.345179] ata9.00: 3907027055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
Dec 18 19:04:59 linux kernel: [ 1.345463] ata10.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.345525] ata9.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.350065] ata1.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.350072] ata1.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.350226] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500LI 2TF0 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.350439] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
Dec 18 19:04:59 linux kernel: [ 1.350512] sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 18 19:04:59 linux kernel: [ 1.350533] sd 0:0:0:0: [sda] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.350546] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.350591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.350808] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.351009] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 19:04:59 linux kernel: [ 1.351067] sd 1:0:0:0: Attached scsi generic sg1 type 0
Dec 18 19:04:59 linux kernel: [ 1.351112] sd 1:0:0:0: [sdb] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.351146] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.351163] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.351730] ata10.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.351733] ata10.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.351798] ata9.00: failed to get Identify Device Data, Emask 0x1
Dec 18 19:04:59 linux kernel: [ 1.351800] ata9.00: configured for UDMA/133
Dec 18 19:04:59 linux kernel: [ 1.355118] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.355324] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 19:04:59 linux kernel: [ 1.355379] sd 2:0:0:0: Attached scsi generic sg2 type 0
Dec 18 19:04:59 linux kernel: [ 1.355429] sd 2:0:0:0: [sdc] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.355464] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.355482] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.355667] scsi 3:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC4B PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.355831] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
Dec 18 19:04:59 linux kernel: [ 1.355869] sd 3:0:0:0: [sdd] 4096-byte physical blocks
Dec 18 19:04:59 linux kernel: [ 1.355929] sd 3:0:0:0: Attached scsi generic sg3 type 0
Dec 18 19:04:59 linux kernel: [ 1.355973] sd 3:0:0:0: [sdd] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.356007] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.356030] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.356253] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.356434] sd 4:0:0:0: [sde] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 19:04:59 linux kernel: [ 1.356481] sd 4:0:0:0: Attached scsi generic sg4 type 0
Dec 18 19:04:59 linux kernel: [ 1.356529] sd 4:0:0:0: [sde] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.356563] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.356579] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.356761] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.356942] sd 5:0:0:0: [sdf] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 19:04:59 linux kernel: [ 1.356987] sd 5:0:0:0: Attached scsi generic sg5 type 0
Dec 18 19:04:59 linux kernel: [ 1.357044] sd 5:0:0:0: [sdf] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.357079] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.357097] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.357268] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.357453] sd 6:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 19:04:59 linux kernel: [ 1.357520] sd 6:0:0:0: Attached scsi generic sg6 type 0
Dec 18 19:04:59 linux kernel: [ 1.357564] sd 6:0:0:0: [sdg] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.357597] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.357620] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.357845] scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.358008] sd 7:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 19:04:59 linux kernel: [ 1.358068] sd 7:0:0:0: Attached scsi generic sg7 type 0
Dec 18 19:04:59 linux kernel: [ 1.358123] sd 7:0:0:0: [sdh] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.358157] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.358175] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.358364] scsi 8:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.358480] sd 8:0:0:0: [sdi] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 19:04:59 linux kernel: [ 1.358542] sd 8:0:0:0: Attached scsi generic sg8 type 0
Dec 18 19:04:59 linux kernel: [ 1.358589] sd 8:0:0:0: [sdi] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.358622] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.358641] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.358710] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD203WI 1AN1 PQ: 0 ANSI: 5
Dec 18 19:04:59 linux kernel: [ 1.358818] sd 9:0:0:0: [sdj] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Dec 18 19:04:59 linux kernel: [ 1.358869] sd 9:0:0:0: Attached scsi generic sg9 type 0
Dec 18 19:04:59 linux kernel: [ 1.358920] sd 9:0:0:0: [sdj] Write Protect is off
Dec 18 19:04:59 linux kernel: [ 1.358965] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00
Dec 18 19:04:59 linux kernel: [ 1.358988] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 18 19:04:59 linux kernel: [ 1.360760] sdb: sdb1
Dec 18 19:04:59 linux kernel: [ 1.361043] sd 1:0:0:0: [sdb] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.362826] sdj: sdj1
Dec 18 19:04:59 linux kernel: [ 1.363102] sd 9:0:0:0: [sdj] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.363805] sdf: sdf1
Dec 18 19:04:59 linux kernel: [ 1.364083] sd 5:0:0:0: [sdf] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.364337] sdh: sdh1
Dec 18 19:04:59 linux kernel: [ 1.364525] sd 7:0:0:0: [sdh] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.365769] sdg: sdg1
Dec 18 19:04:59 linux kernel: [ 1.366035] sd 6:0:0:0: [sdg] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.367288] sde: sde1
Dec 18 19:04:59 linux kernel: [ 1.367505] sd 4:0:0:0: [sde] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.369156] sdc: sdc1
Dec 18 19:04:59 linux kernel: [ 1.369428] sd 2:0:0:0: [sdc] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.373230] sda: sda1 sda2 sda3
Dec 18 19:04:59 linux kernel: [ 1.373565] sd 0:0:0:0: [sda] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.381600] sdi: sdi1
Dec 18 19:04:59 linux kernel: [ 1.381878] sd 8:0:0:0: [sdi] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.398460] sdd: sdd1 sdd2
Dec 18 19:04:59 linux kernel: [ 1.398761] sd 3:0:0:0: [sdd] Attached SCSI disk
Dec 18 19:04:59 linux kernel: [ 1.401210] Freeing unused kernel memory: 992k freed
Dec 18 19:04:59 linux kernel: [ 1.401449] Write protecting the kernel read-only data: 12288k
Dec 18 19:04:59 linux kernel: [ 1.406208] Freeing unused kernel memory: 1176k freed
Dec 18 19:04:59 linux kernel: [ 1.410352] Freeing unused kernel memory: 968k freed
Dec 18 19:04:59 linux kernel: [ 1.490043] [drm] Initialized drm 1.1.0 20060810
Dec 18 19:04:59 linux kernel: [ 1.493902] Disabling lock debugging due to kernel taint
Dec 18 19:04:59 linux kernel: [ 1.494377] r8168 Gigabit Ethernet driver 8.034.00-NAPI loaded
Dec 18 19:04:59 linux kernel: [ 1.494500] r8168 0000:01:00.0: irq 49 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 1.494791] eth%d: RTL8168E-VL/8111E-VL at 0xffffc90000662000, 94:de:80:06:0b:ac, IRQ 49
Dec 18 19:04:59 linux kernel: [ 1.680056] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
Dec 18 19:04:59 linux kernel: [ 1.681298] eth0: Identified chip type is 'RTL8168E-VL/8111E-VL'.
Dec 18 19:04:59 linux kernel: [ 1.681301] r8168 Copyright (C) 2012 Realtek NIC software team <nicfae@realtek.com>
Dec 18 19:04:59 linux kernel: [ 1.681301] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
Dec 18 19:04:59 linux kernel: [ 1.681301] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
Dec 18 19:04:59 linux kernel: [ 1.725690] [drm] VGACON disable radeon kernel modesetting.
Dec 18 19:04:59 linux kernel: [ 1.729735] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Dec 18 19:04:59 linux kernel: [ 1.729820] [drm] No driver support for vblank timestamp query.
Dec 18 19:04:59 linux kernel: [ 1.729854] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:01.0 on minor 0
Dec 18 19:04:59 linux kernel: [ 1.773971] tsc: Refined TSC clocksource calibration: 3393.827 MHz
Dec 18 19:04:59 linux kernel: [ 1.774011] Switching to clocksource tsc
Dec 18 19:04:59 linux kernel: [ 1.836645] pata_jmicron 0000:02:00.1: setting latency timer to 64
Dec 18 19:04:59 linux kernel: [ 1.836970] scsi10 : pata_jmicron
Dec 18 19:04:59 linux kernel: [ 1.837064] scsi11 : pata_jmicron
Dec 18 19:04:59 linux kernel: [ 1.837137] ata11: PATA max UDMA/100 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 19
Dec 18 19:04:59 linux kernel: [ 1.837174] ata12: PATA max UDMA/100 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 19
Dec 18 19:04:59 linux kernel: [ 14.896024] bio: create slab <bio-1> at 1
Dec 18 19:04:59 linux kernel: [ 15.044160] bio: create slab <bio-1> at 1
Dec 18 19:04:59 linux kernel: [ 20.578633] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
Dec 18 19:04:59 linux kernel: [ 20.578638] PM: Marking nosave pages: [mem 0x9d6f1000-0x9e9d2fff]
Dec 18 19:04:59 linux kernel: [ 20.578713] PM: Marking nosave pages: [mem 0x9e9d4000-0x9ebd9fff]
Dec 18 19:04:59 linux kernel: [ 20.578722] PM: Marking nosave pages: [mem 0x9f04c000-0x9f7dcfff]
Dec 18 19:04:59 linux kernel: [ 20.578753] PM: Marking nosave pages: [mem 0x9f800000-0x100000fff]
Dec 18 19:04:59 linux kernel: [ 20.579478] PM: Marking nosave pages: [mem 0x94000000-0x97ffffff]
Dec 18 19:04:59 linux kernel: [ 20.579729] PM: Basic memory bitmaps created
Dec 18 19:04:59 linux kernel: [ 20.606151] PM: Basic memory bitmaps freed
Dec 18 19:04:59 linux kernel: [ 20.700364] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Dec 18 19:04:59 linux kernel: [ 26.953851] microcode: CPU0: patch_level=0x06001116
Dec 18 19:04:59 linux kernel: [ 27.010788] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Dec 18 19:04:59 linux kernel: [ 27.218443] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
Dec 18 19:04:59 linux kernel: [ 27.218489] microcode: CPU1: patch_level=0x06001116
Dec 18 19:04:59 linux kernel: [ 27.218646] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Dec 18 19:04:59 linux kernel: [ 28.145148] kvm: Nested Virtualization enabled
Dec 18 19:04:59 linux kernel: [ 28.145186] kvm: Nested Paging enabled
Dec 18 19:04:59 linux kernel: [ 28.543094] hda-intel: Force to non-snoop mode
Dec 18 19:04:59 linux kernel: [ 28.543176] snd_hda_intel 0000:00:01.1: irq 50 for MSI/MSI-X
Dec 18 19:04:59 linux kernel: [ 28.714654] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
Dec 18 19:04:59 linux kernel: [ 37.003766] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
Dec 18 19:04:59 linux kernel: [ 37.543110] Adding 2097148k swap on /root/myswapfile. Priority:-1 extents:16 across:3932156k
Dec 18 19:04:59 linux kernel: [ 38.247704] r8168: eth1: link down
Dec 18 19:04:59 linux kernel: [ 38.247761] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Dec 18 19:04:59 linux kernel: [ 41.037132] r8168: eth1: link up
Dec 18 19:04:59 linux kernel: [ 41.037153] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Dec 18 19:04:59 linux kernel: [ 41.239963] r8168: eth1: link up
Dec 18 19:04:59 linux kernel: [ 49.705099] lp: driver loaded but no devices found
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 3.7.0 does not detect Realtek network card automatically
2012-12-18 21:15 3.7.0 does not detect Realtek network card automatically Björn Christoph
@ 2012-12-18 22:43 ` Francois Romieu
0 siblings, 0 replies; 2+ messages in thread
From: Francois Romieu @ 2012-12-18 22:43 UTC (permalink / raw)
To: Björn Christoph; +Cc: linux-kernel
Björn Christoph <einkaufenbc09@googlemail.com> :
[...]
> Not sure what to do here. It's an Ubuntu kernel - should I take the
> one from the kernel GIT, compile it and activate some debugging or
> something to assist?
You should try to reproduce the problem with the kernel included r8169
driver and report any problem with it to netdev@vger.kernel.org.
--
Ueimor
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-12-18 23:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-12-18 21:15 3.7.0 does not detect Realtek network card automatically Björn Christoph
2012-12-18 22:43 ` Francois Romieu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®