mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@avionic-design.de>
To: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] rtc-pcf8523: Add low battery voltage support
Date: Wed, 19 Dec 2012 15:42:26 +0100	[thread overview]
Message-ID: <20121219144225.GB7837@avionic-0098.adnet.avionic-design.de> (raw)
In-Reply-To: <20121219140456.GA14217@axis.com>

[-- Attachment #1: Type: text/plain, Size: 1888 bytes --]

On Wed, Dec 19, 2012 at 03:04:56PM +0100, Jesper Nilsson wrote:
> This patch implements reading of the battery voltage low signal for
> rtc-pcf8523.
> 
> The bit is read-only and cannot be cleared by software, so no
> clear-function is implemented.
> 
> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
> ---
> diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c
> index be05a64..82a9895 100644
> --- a/drivers/rtc/rtc-pcf8523.c
> +++ b/drivers/rtc/rtc-pcf8523.c
> @@ -23,6 +23,7 @@
>  #define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */
>  #define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */
>  #define REG_CONTROL3_PM_MASK 0xe0
> +#define REG_CONTROL3_BLF (1 << 2) /* Battery low bit, read-only */

Nit: "battery" since you don't have a full sentence.

>  
>  #define REG_SECONDS  0x03
>  #define REG_SECONDS_OS (1 << 7)
> @@ -250,9 +252,29 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm)
>  	return pcf8523_start_rtc(client);
>  }
>  
> +static int pcf8523_rtc_read_vl(struct device *dev, int *vl)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	u8 value;
> +	int err;
> +
> +	err = pcf8523_read(client, REG_CONTROL3, &value);
> +	if (err < 0)
> +		return err;
> +
> +	if (value & REG_CONTROL3_BLF)
> +		*vl = 1;
> +	else
> +		*vl = 0;
> +
> +	return 0;
> +}
> +
> +

That's one blank line too much.

>  static const struct rtc_class_ops pcf8523_rtc_ops = {
> -	.read_time = pcf8523_rtc_read_time,
> -	.set_time = pcf8523_rtc_set_time,
> +	.read_time	= pcf8523_rtc_read_time,
> +	.set_time	= pcf8523_rtc_set_time,

Maybe you shouldn't reindent these, but rather adopt the existing style
instead.

> +	.read_vl	= pcf8523_rtc_read_vl,

What tree is this based on? None of the trees I have contains .read_vl
in rtc_class_ops.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

  reply	other threads:[~2012-12-19 14:42 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-19 14:04 Jesper Nilsson
2012-12-19 14:42 ` Thierry Reding [this message]
2012-12-19 15:10   ` Jesper Nilsson
2012-12-19 15:19     ` Thierry Reding
2012-12-19 15:34       ` [PATCH v2] " Jesper Nilsson
2012-12-19 15:48         ` Thierry Reding
2012-12-19 16:00           ` [PATCH v3] " Jesper Nilsson
2012-12-19 22:03             ` Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121219144225.GB7837@avionic-0098.adnet.avionic-design.de \
    --to=thierry.reding@avionic-design.de \
    --cc=a.zummo@towertech.it \
    --cc=akpm@linux-foundation.org \
    --cc=jesper.nilsson@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome