From: Hans Verkuil <hverkuil@xs4all.nl>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: mchehab@redhat.com, sameo@linux.intel.com, perex@perex.cz,
tiwai@suse.de, linux-media@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 0/8] Driver for Si476x series of chips
Date: Tue, 26 Feb 2013 09:30:07 +0100 [thread overview]
Message-ID: <201302260930.07222.hverkuil@xs4all.nl> (raw)
In-Reply-To: <1361860734-21666-1-git-send-email-andrew.smirnov@gmail.com>
On Tue February 26 2013 07:38:46 Andrey Smirnov wrote:
> This is a fourth version of the patchset originaly posted here:
> https://lkml.org/lkml/2012/9/13/590
>
> Second version of the patch was posted here:
> https://lkml.org/lkml/2012/10/5/598
>
> Third version of the patch was posted here:
> https://lkml.org/lkml/2012/10/23/510
>
> Fourth version of the patch was posted here:
> https://lkml.org/lkml/2013/2/18/572
>
> To save everyone's time I'll repost the original description of it:
>
> This patchset contains a driver for a Silicon Laboratories 476x series
> of radio tuners. The driver itself is implemented as an MFD devices
> comprised of three parts:
> 1. Core device that provides all the other devices with basic
> functionality and locking scheme.
> 2. Radio device that translates between V4L2 subsystem requests into
> Core device commands.
> 3. Codec device that does similar to the earlier described task, but
> for ALSA SoC subsystem.
>
> v5 of this driver has following changes:
> - Generic controls are converted to standard ones
> - Custom controls use a differend offest as base
> - Added documentation with controls description
Reviewed this. Found some small stuff, although I need a bit more info
regarding the diversity mode (see my question in the review of patch 8/8).
Depending on that you can likely make a v6 which I can ack.
Regards,
Hans
>
>
> Andrey Smirnov (8):
> mfd: Add header files and Kbuild plumbing for SI476x MFD core
> mfd: Add commands abstraction layer for SI476X MFD
> mfd: Add the main bulk of core driver for SI476x code
> mfd: Add chip properties handling code for SI476X MFD
> v4l2: Add standard controls for FM receivers
> v4l2: Add documentation for the FM RX controls
> v4l2: Add private controls base for SI476X
> v4l2: Add a V4L2 driver for SI476X MFD
>
> Documentation/DocBook/media/v4l/compat.xml | 3 +
> Documentation/DocBook/media/v4l/controls.xml | 72 +
> .../DocBook/media/v4l/vidioc-g-ext-ctrls.xml | 11 +-
> Documentation/video4linux/si476x.txt | 187 +++
> drivers/media/radio/Kconfig | 17 +
> drivers/media/radio/Makefile | 1 +
> drivers/media/radio/radio-si476x.c | 1581 ++++++++++++++++++++
> drivers/media/v4l2-core/v4l2-ctrls.c | 14 +-
> drivers/mfd/Kconfig | 13 +
> drivers/mfd/Makefile | 4 +
> drivers/mfd/si476x-cmd.c | 1553 +++++++++++++++++++
> drivers/mfd/si476x-i2c.c | 878 +++++++++++
> drivers/mfd/si476x-prop.c | 234 +++
> include/linux/mfd/si476x-core.h | 525 +++++++
> include/media/si476x.h | 426 ++++++
> include/uapi/linux/v4l2-controls.h | 17 +-
> 16 files changed, 5531 insertions(+), 5 deletions(-)
> create mode 100644 Documentation/video4linux/si476x.txt
> create mode 100644 drivers/media/radio/radio-si476x.c
> create mode 100644 drivers/mfd/si476x-cmd.c
> create mode 100644 drivers/mfd/si476x-i2c.c
> create mode 100644 drivers/mfd/si476x-prop.c
> create mode 100644 include/linux/mfd/si476x-core.h
> create mode 100644 include/media/si476x.h
>
>
prev parent reply other threads:[~2013-02-26 8:31 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-26 6:38 Andrey Smirnov
2013-02-26 6:38 ` [PATCH v5 1/8] mfd: Add header files and Kbuild plumbing for SI476x MFD core Andrey Smirnov
2013-02-26 6:38 ` [PATCH v5 2/8] mfd: Add commands abstraction layer for SI476X MFD Andrey Smirnov
2013-02-26 6:38 ` [PATCH v5 3/8] mfd: Add the main bulk of core driver for SI476x code Andrey Smirnov
2013-02-26 6:38 ` [PATCH v5 4/8] mfd: Add chip properties handling code for SI476X MFD Andrey Smirnov
2013-02-26 6:38 ` [PATCH v5 5/8] v4l2: Add standard controls for FM receivers Andrey Smirnov
2013-02-26 8:00 ` Hans Verkuil
2013-02-26 6:38 ` [PATCH v5 6/8] v4l2: Add documentation for the FM RX controls Andrey Smirnov
2013-02-26 8:06 ` Hans Verkuil
2013-02-26 6:38 ` [PATCH v5 7/8] v4l2: Add private controls base for SI476X Andrey Smirnov
2013-02-26 8:07 ` Hans Verkuil
2013-02-26 6:38 ` [PATCH v5 8/8] v4l2: Add a V4L2 driver for SI476X MFD Andrey Smirnov
2013-02-26 8:25 ` Hans Verkuil
2013-02-26 16:03 ` Andrey Smirnov
2013-02-26 8:30 ` Hans Verkuil [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201302260930.07222.hverkuil@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=andrew.smirnov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
--cc=perex@perex.cz \
--cc=sameo@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®