From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Alexander Shiyan <shc_work@mail.ru>,
Brian Norris <computersforpeace@gmail.com>,
David Woodhouse <David.Woodhouse@intel.com>
Subject: [ 48/75] mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY
Date: Mon, 18 Mar 2013 14:07:11 -0700 [thread overview]
Message-ID: <20130318210513.725190489@linuxfoundation.org> (raw)
In-Reply-To: <20130318210510.203500214@linuxfoundation.org>
3.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brian Norris <computersforpeace@gmail.com>
commit 5bc7c33ca93a285dcfe7b7fd64970f6314440ad1 upstream.
This partially reverts commit 1696e6bc2ae83734e64e206ac99766ea19e9a14e
("mtd: nand: kill NAND_NO_READRDY").
In that patch I overlooked a few things.
The original documentation for NAND_NO_READRDY included "True for all
large page devices, as they do not support autoincrement." I was
conflating "not support autoincrement" with the NAND_NO_AUTOINCR option,
which was in fact doing nothing. So, when I dropped NAND_NO_AUTOINCR, I
concluded that I then could harmlessly drop NAND_NO_READRDY. But of
course the fact the NAND_NO_AUTOINCR was doing nothing didn't mean
NAND_NO_READRDY was doing nothing...
So, NAND_NO_READRDY is re-introduced as NAND_NEED_READRDY and applied
only to those few remaining small-page NAND which needed it in the first
place.
Reported-by: Alexander Shiyan <shc_work@mail.ru>
Tested-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/nand/nand_base.c | 16 ++++++++
drivers/mtd/nand/nand_ids.c | 78 ++++++++++++++++++++++---------------------
include/linux/mtd/nand.h | 7 +++
3 files changed, 63 insertions(+), 38 deletions(-)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1527,6 +1527,14 @@ static int nand_do_read_ops(struct mtd_i
oobreadlen -= toread;
}
}
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
@@ -1791,6 +1799,14 @@ static int nand_do_read_oob(struct mtd_i
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
readlen -= len;
if (!readlen)
break;
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -22,49 +22,51 @@
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16},
#endif
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16},
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS},
/*
* These are the new chips with large page size. The pagesize and the
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -187,6 +187,13 @@ typedef enum {
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY 0x00000100
+
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
next prev parent reply other threads:[~2013-03-18 21:53 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 21:06 [ 00/75] 3.8.4-stable review Greg Kroah-Hartman
2013-03-18 21:06 ` [ 01/75] qcaux: add Franklin U600 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 02/75] xen/pciback: Dont disable a PCI device that is already disabled Greg Kroah-Hartman
2013-03-18 21:06 ` [ 03/75] virtio: rng: disallow multiple device registrations, fixes crashes Greg Kroah-Hartman
2013-03-18 21:06 ` [ 04/75] USB: option: add Huawei E5331 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 05/75] USB: cdc-wdm: fix buffer overflow Greg Kroah-Hartman
2013-03-18 21:06 ` [ 06/75] tools: usb: ffs-test: Fix build failure Greg Kroah-Hartman
2013-03-18 21:06 ` [ 07/75] usb: dwc3: core: dont forget to free coherent memory Greg Kroah-Hartman
2013-03-18 21:06 ` [ 08/75] usb: cp210x new Vendor/Device IDs Greg Kroah-Hartman
2013-03-18 21:06 ` [ 09/75] USB: added support for Cinterions products AH6 and PLS8 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 10/75] usb: serial: Add Rigblaster Advantage to device table Greg Kroah-Hartman
2013-03-18 21:06 ` [ 11/75] USB: storage: fix Huawei mode switching regression Greg Kroah-Hartman
2013-03-18 21:06 ` [ 12/75] USB: EHCI: work around silicon bug in Intels EHCI controllers Greg Kroah-Hartman
2013-03-19 16:34 ` Sven Joachim
2013-03-19 18:17 ` Alan Stern
2013-03-19 18:43 ` Sven Joachim
2013-03-19 20:10 ` Alan Stern
2013-03-19 20:28 ` Sven Joachim
2013-03-19 21:00 ` Alan Stern
2013-03-19 21:44 ` Sven Joachim
2013-03-20 20:08 ` Greg Kroah-Hartman
2013-03-20 20:14 ` Sven Joachim
2013-03-20 20:28 ` Greg Kroah-Hartman
2013-03-20 20:41 ` Alan Stern
2013-03-20 22:28 ` Greg Kroah-Hartman
2013-03-21 14:35 ` Alan Stern
2013-03-19 18:03 ` Stephen Warren
2013-03-18 21:06 ` [ 13/75] USB: EHCI: dont check DMA values in QH overlays Greg Kroah-Hartman
2013-03-18 21:06 ` [ 14/75] staging: vt6656: Fix oops on resume from suspend Greg Kroah-Hartman
2013-03-18 21:06 ` [ 15/75] staging: comedi: dt9812: use CR_CHAN() for channel number Greg Kroah-Hartman
2013-03-18 21:06 ` [ 16/75] qcserial: bind to DM/DIAG port on Gobi 1K devices Greg Kroah-Hartman
2013-03-18 21:06 ` [ 17/75] signal: always clear sa_restorer on execve Greg Kroah-Hartman
2013-03-18 21:06 ` [ 18/75] ext3: Fix format string issues Greg Kroah-Hartman
2013-03-18 21:06 ` [ 19/75] tty/8250_pnp: serial port detection regression since v3.7 Greg Kroah-Hartman
2013-03-18 21:06 ` [ 20/75] serial: 8250: Keep 8250.<xxxx> module options functional after driver rename Greg Kroah-Hartman
2013-03-18 21:06 ` [ 21/75] serial: 8250_pci: add support for another kind of NetMos Technology PCI 9835 Multi-I/O Controller Greg Kroah-Hartman
2013-03-18 21:06 ` [ 22/75] tty: serial: fix typo "ARCH_S5P6450" Greg Kroah-Hartman
2013-03-18 21:06 ` [ 23/75] tty: serial: fix typo "SERIAL_S3C2412" Greg Kroah-Hartman
2013-03-18 21:06 ` [ 24/75] tty/serial: Add support for Altera serial port Greg Kroah-Hartman
2013-03-18 21:06 ` [ 25/75] TTY: disable debugging warning Greg Kroah-Hartman
2013-03-18 21:06 ` [ 26/75] TTY: do not reset masters packet mode Greg Kroah-Hartman
2013-03-18 21:06 ` [ 27/75] Fix 4 port and add support for 8 port Unknown PCI serial port cards Greg Kroah-Hartman
2013-03-18 21:06 ` [ 28/75] ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels Greg Kroah-Hartman
2013-03-18 21:06 ` [ 29/75] perf,x86: fix kernel crash with PEBS/BTS after suspend/resume Greg Kroah-Hartman
2013-03-18 21:11 ` Stephane Eranian
2013-03-18 21:20 ` Greg Kroah-Hartman
2013-03-18 21:35 ` Stephane Eranian
2013-03-18 23:00 ` Greg Kroah-Hartman
2013-03-18 21:06 ` [ 30/75] ALSA: seq: Fix missing error handling in snd_seq_timer_open() Greg Kroah-Hartman
2013-03-18 21:06 ` [ 31/75] ARM: w1-gpio: fix erroneous gpio requests Greg Kroah-Hartman
2013-03-18 21:06 ` [ 32/75] hwmon: (pmbus/ltc2978) Fix temperature reporting Greg Kroah-Hartman
2013-03-18 21:06 ` [ 33/75] hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes Greg Kroah-Hartman
2013-03-18 21:06 ` [ 34/75] w1-gpio: remove erroneous __exit and __exit_p() Greg Kroah-Hartman
2013-03-18 21:06 ` [ 35/75] w1: fix oops when w1_search is called from netlink connector Greg Kroah-Hartman
2013-03-18 21:06 ` [ 36/75] powerpc: Fix STAB initialization Greg Kroah-Hartman
2013-03-18 21:07 ` [ 37/75] powerpc: Fix cputable entry for 970MP rev 1.0 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 38/75] powerpc: Make VSID_BITS* dependency explicit Greg Kroah-Hartman
2013-03-18 21:07 ` [ 39/75] powerpc: Update kernel VSID range Greg Kroah-Hartman
2013-03-18 21:07 ` [ 40/75] powerpc: Rename USER_ESID_BITS* to ESID_BITS* Greg Kroah-Hartman
2013-03-18 21:07 ` [ 41/75] ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830 Greg Kroah-Hartman
2013-03-19 16:25 ` Luis Henriques
[not found] ` <f20a6d0dd7604c0fa6ed95604a8dfb35@DLEE70.ent.ti.com>
2013-03-19 17:27 ` Matt Porter
2013-03-19 18:25 ` Luis Henriques
2013-03-18 21:07 ` [ 42/75] selinux: use GFP_ATOMIC under spin_lock Greg Kroah-Hartman
2013-03-18 21:07 ` [ 43/75] perf,x86: fix wrmsr_on_cpu() warning on suspend/resume Greg Kroah-Hartman
2013-03-18 21:07 ` [ 44/75] perf,x86: fix link failure for non-Intel configs Greg Kroah-Hartman
2013-03-18 21:07 ` [ 45/75] s390: critical section cleanup vs. machine checks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 46/75] s390/mm: fix flush_tlb_kernel_range() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 47/75] btrfs: use rcu_barrier() to wait for bdev puts at unmount Greg Kroah-Hartman
2013-03-18 21:07 ` Greg Kroah-Hartman [this message]
2013-03-18 21:07 ` [ 49/75] kbuild: fix make headers_check with make 3.80 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 50/75] atmel_lcdfb: fix 16-bpp modes on older SOCs Greg Kroah-Hartman
2013-03-18 21:07 ` [ 51/75] net/mlx4_en: Initialize RFS filters lock and list in init_netdev Greg Kroah-Hartman
2013-03-18 21:07 ` [ 52/75] net/mlx4_en: Disable RFS when running in SRIOV mode Greg Kroah-Hartman
2013-03-18 21:07 ` [ 53/75] block: use i_size_write() in bd_set_size() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 54/75] loopdev: fix a deadlock Greg Kroah-Hartman
2013-03-18 21:07 ` [ 55/75] loopdev: remove an user triggerable oops Greg Kroah-Hartman
2013-03-18 21:07 ` [ 56/75] net/sctp: Validate parameter size for SCTP_GET_ASSOC_STATS Greg Kroah-Hartman
2013-03-18 21:07 ` [ 57/75] l2tp: Restore socket refcount when sendmsg succeeds Greg Kroah-Hartman
2013-03-18 21:07 ` [ 58/75] atl1c: restore buffer state Greg Kroah-Hartman
2013-03-18 21:07 ` [ 59/75] rds: limit the size allocated by rds_message_alloc() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 60/75] net: ipv6: Dont purge default router if accept_ra=2 Greg Kroah-Hartman
2013-03-18 21:07 ` [ 61/75] tcp: fix double-counted receiver RTT when leaving receiver fast path Greg Kroah-Hartman
2013-03-18 21:07 ` [ 62/75] tun: add a missing nf_reset() in tun_net_xmit() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 63/75] vxlan: fix oops when delete netns containing vxlan Greg Kroah-Hartman
2013-03-18 21:07 ` [ 64/75] bonding: fire NETDEV_RELEASE event only on 0 slaves Greg Kroah-Hartman
2013-03-18 21:07 ` [ 65/75] team: unsyc the devices addresses when port is removed Greg Kroah-Hartman
2013-03-18 21:07 ` [ 66/75] macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode Greg Kroah-Hartman
2013-03-18 21:07 ` [ 67/75] netlabel: correctly list all the static label mappings Greg Kroah-Hartman
2013-03-18 21:07 ` [ 68/75] bridging: fix rx_handlers return code Greg Kroah-Hartman
2013-03-18 21:07 ` [ 69/75] ipv6: stop multicast forwarding to process interface scoped addresses Greg Kroah-Hartman
2013-03-18 21:07 ` [ 70/75] bridge: fix mdb info leaks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 71/75] rtnl: fix info leak on RTM_GETLINK request for VF devices Greg Kroah-Hartman
2013-03-18 21:07 ` [ 72/75] dcbnl: fix various netlink info leaks Greg Kroah-Hartman
2013-03-18 21:07 ` [ 73/75] 6lowpan: Fix endianness issue in is_addr_link_local() Greg Kroah-Hartman
2013-03-18 21:07 ` [ 74/75] Revert "drm/i915: enable irqs earlier when resuming" Greg Kroah-Hartman
2013-03-27 15:45 ` Ilya Tumaykin
2013-03-27 16:52 ` Daniel Vetter
2013-03-18 21:07 ` [ 75/75] Revert "drm/i915: reorder setup sequence to have irqs for output setup" Greg Kroah-Hartman
2013-03-19 0:51 ` [ 00/75] 3.8.4-stable review Shuah Khan
2013-03-19 0:57 ` Greg Kroah-Hartman
2013-03-19 1:09 ` Shuah Khan
2013-03-19 2:00 ` Greg Kroah-Hartman
2013-03-19 4:00 ` Shuah Khan
2013-03-19 4:07 ` Greg Kroah-Hartman
2013-03-19 15:51 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130318210513.725190489@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=David.Woodhouse@intel.com \
--cc=computersforpeace@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=shc_work@mail.ru \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome